[I O多路复用在Redis中的应用 ]的搜索结果

...MS） 支持OLAP应用，采用MPP（Massively Parallel Processing：大规模并行处理系统）架构模式 支持OLTP应用，读写性能可扩展 集群级别的ACID特性 多租户安全 也可被用作分布式Key-Value存储 事务处理与数据分析处理混合型数据库 支持丰富的SQL语句类型，比如：关联子查询 支持绝大部分PostgreSQL的SQL语句 分布式多版本并发控制（MVCC：Multi-version Concurrency Control） 支持JSON和XML格式 Postgres-XL缺少的功能 内建的高可用机制 使用外部机制实现高可能，如：Corosync/Pacemaker 有未来功能提升的空间 增加节点/重新分片数据（re-shard）的简便性 数据重分布（redistribution）期间会锁表 可采用预分片（pre-shard）方式解决，在同台物理服务器上建立多个数据节点，每个节点存储一个数据分片。数据重分布时，将一些数据节点迁出即可 某些外键、唯一性约束功能 Postgres-XL架构 [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-M9lFuEIP-1640133702200)(./assets/postgre-xl.jpg)] 基于开源项目Postgres-XC XL增加了MPP，允许数据节点间直接通讯，交换复杂跨节点关联查询相关数据信息，减少协调器负载。 多个协调器（Coordinator） 应用程序的数据库连入点 分析查询语句，生成执行计划 多个数据节点（DataNode） 实际的数据存储 数据自动打散分布到集群中各数据节点 本地执行查询 一个查询在所有相关节点上并行查询 全局事务管理器（GTM：Global Transaction Manager） 提供事务间一致性视图 部署GTM Proxy实例，以提高性能 Postgre-XL主要组件 GTM (Global Transaction Manager) - 全局事务管理器 GTM是Postgres-XL的一个关键组件，用于提供一致的事务管理和元组可见性控制。 GTM Standby GTM的备节点，在pgxc,pgxl中，GTM控制所有的全局事务分配，如果出现问题，就会导致整个集群不可用，为了增加可用性，增加该备用节点。当GTM出现问题时，GTM Standby可以升级为GTM，保证集群正常工作。 GTM-Proxy GTM需要与所有的Coordinators通信，为了降低压力，可以在每个Coordinator机器上部署一个GTM-Proxy。 Coordinator --协调器 协调器是应用程序到数据库的接口。它的作用类似于传统的PostgreSQL后台进程，但是协调器不存储任何实际数据。实际数据由数据节点存储。协调器接收SQL语句，根据需要获取全局事务Id和全局快照，确定涉及哪些数据节点，并要求它们执行(部分)语句。当向数据节点发出语句时，它与GXID和全局快照相关联，以便多版本并发控制(MVCC)属性扩展到集群范围。 Datanode --数据节点 用于实际存储数据。表可以分布在各个数据节点之间，也可以复制到所有数据节点。数据节点没有整个数据库的全局视图，它只负责本地存储的数据。接下来，协调器将检查传入语句，并制定子计划。然后，根据需要将这些数据连同GXID和全局快照一起传输到涉及的每个数据节点。数据节点可以在不同的会话中接收来自各个协调器的请求。但是，由于每个事务都是惟一标识的，并且与一致的(全局)快照相关联，所以每个数据节点都可以在其事务和快照上下文中正确执行。 Postgres-XL继承了PostgreSQL Postgres-XL是PostgreSQL的扩展并继承了其很多特性： 复杂查询 外键 触发器 视图 事务 MVCC(多版本控制) 此外，类似于PostgreSQL，用户可以通过多种方式扩展Postgres-XL，例如添加新的 数据类型 函数 操作 聚合函数 索引类型 过程语言 安装 环境说明 由于资源有限，gtm一台、另外两台身兼数职。 主机名 IP 角色 端口 nodename 数据目录 gtm 192.168.20.132 GTM 6666 gtm /nodes/gtm 协调器 5432 coord1 /nodes/coordinator xl1 192.168.20.133 数据节点 5433 node1 /nodes/pgdata gtm代理 6666 gtmpoxy01 /nodes/gtm_pxy1 协调器 5432 coord2 /nodes/coordinator xl2 192.168.20.134 数据节点 5433 node2 /nodes/pgdata gtm代理 6666 gtmpoxy02 /nodes/gtm_pxy2 要求 GNU make版本 3.8及以上版本 [root@pg ~] make --versionGNU Make 3.82Built for x86_64-redhat-linux-gnuCopyright (C) 2010 Free Software Foundation, Inc.License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law. 需安装GCC包 需安装tar包 用于解压缩文件 默认需要GNU Readline library 其作用是可以让psql命令行记住执行过的命令，并且可以通过键盘上下键切换命令。但是可以通过--without-readline禁用这个特性，或者可以指定--withlibedit-preferred选项来使用libedit 默认使用zlib压缩库 可通过--without-zlib选项来禁用 配置hosts 所有主机上都配置 [root@xl2 11] cat /etc/hosts127.0.0.1 localhost192.168.20.132 gtm192.168.20.133 xl1192.168.20.134 xl2 关闭防火墙、Selinux 所有主机都执行 关闭防火墙： [root@gtm ~] systemctl stop firewalld.service[root@gtm ~] systemctl disable firewalld.service selinux设置: [root@gtm ~]vim /etc/selinux/config 设置SELINUX=disabled，保存退出。 This file controls the state of SELinux on the system. SELINUX= can take one of these three values: enforcing - SELinux security policy is enforced. permissive - SELinux prints warnings instead of enforcing. disabled - No SELinux policy is loaded.SELINUX=disabled SELINUXTYPE= can take one of three two values: targeted - Targeted processes are protected, minimum - Modification of targeted policy. Only selected processes are protected. mls - Multi Level Security protection. 安装依赖包 所有主机上都执行 yum install -y flex bison readline-devel zlib-devel openjade docbook-style-dsssl gcc 创建用户 所有主机上都执行 [root@gtm ~] useradd postgres[root@gtm ~] passwd postgres[root@gtm ~] su - postgres[root@gtm ~] mkdir ~/.ssh[root@gtm ~] chmod 700 ~/.ssh 配置SSH免密登录 仅仅在gtm节点配置如下操作： [root@gtm ~] su - postgres[postgres@gtm ~] ssh-keygen -t rsa[postgres@gtm ~] cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys[postgres@gtm ~] chmod 600 ~/.ssh/authorized_keys 将刚生成的认证文件拷贝到xl1到xl2中，使得gtm节点可以免密码登录xl1~xl2的任意一个节点： [postgres@gtm ~] scp ~/.ssh/authorized_keys postgres@xl1:~/.ssh/[postgres@gtm ~] scp ~/.ssh/authorized_keys postgres@xl2:~/.ssh/ 对所有提示都不要输入，直接enter下一步。直到最后，因为第一次要求输入目标机器的用户密码，输入即可。 下载源码 下载地址：https://www.postgres-xl.org/download/ [root@slave ~] ll postgres-xl-10r1.1.tar.gz-rw-r--r-- 1 root root 28121666 May 30 05:21 postgres-xl-10r1.1.tar.gz 编译、安装Postgres-XL 所有节点都安装，编译需要一点时间，最好同时进行编译。 [root@slave ~] tar xvf postgres-xl-10r1.1.tar.gz[root@slave ~] ./configure --prefix=/home/postgres/pgxl/[root@slave ~] make[root@slave ~] make install[root@slave ~] cd contrib/ --安装必要的工具,在gtm节点上安装即可[root@slave ~] make[root@slave ~] make install 配置环境变量 所有节点都要配置 进入postgres用户，修改其环境变量，开始编辑 [root@gtm ~]su - postgres[postgres@gtm ~]vi .bashrc --不是.bash_profile 在打开的文件末尾，新增如下变量配置： export PGHOME=/home/postgres/pgxlexport LD_LIBRARY_PATH=$PGHOME/lib:$LD_LIBRARY_PATHexport PATH=$PGHOME/bin:$PATH 按住esc，然后输入:wq!保存退出。输入以下命令对更改重启生效。 [postgres@gtm ~] source .bashrc --不是.bash_profile 输入以下语句，如果输出变量结果，代表生效 [postgres@gtm ~] echo $PGHOME 应该输出/home/postgres/pgxl代表生效 配置集群 生成pgxc_ctl.conf配置文件 [postgres@gtm ~] pgxc_ctl prepare/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.ERROR: File "/home/postgres/pgxl/pgxc_ctl/pgxc_ctl.conf" not found or not a regular file. No such file or directoryInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxl/pgxc_ctl --configuration /home/postgres/pgxl/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxl/pgxc_ctl 配置pgxc_ctl.conf 新建/home/postgres/pgxc_ctl/pgxc_ctl.conf文件，编辑如下： 对着模板文件一个一个修改，否则会造成初始化过程出现各种神奇问题。 pgxcInstallDir=$PGHOMEpgxlDATA=$PGHOME/data pgxcOwner=postgres---- GTM Master -----------------------------------------gtmName=gtmgtmMasterServer=gtmgtmMasterPort=6666gtmMasterDir=$pgxlDATA/nodes/gtmgtmSlave=y Specify y if you configure GTM Slave. Otherwise, GTM slave will not be configured and all the following variables will be reset.gtmSlaveName=gtmSlavegtmSlaveServer=gtm value none means GTM slave is not available. Give none if you don't configure GTM Slave.gtmSlavePort=20001 Not used if you don't configure GTM slave.gtmSlaveDir=$pgxlDATA/nodes/gtmSlave Not used if you don't configure GTM slave.---- GTM-Proxy Master -------gtmProxyDir=$pgxlDATA/nodes/gtm_proxygtmProxy=y gtmProxyNames=(gtm_pxy1 gtm_pxy2) gtmProxyServers=(xl1 xl2) gtmProxyPorts=(6666 6666) gtmProxyDirs=($gtmProxyDir $gtmProxyDir) ---- Coordinators ---------coordMasterDir=$pgxlDATA/nodes/coordcoordNames=(coord1 coord2) coordPorts=(5432 5432) poolerPorts=(6667 6667) coordPgHbaEntries=(0.0.0.0/0)coordMasterServers=(xl1 xl2) coordMasterDirs=($coordMasterDir $coordMasterDir)coordMaxWALsernder=0 没设置备份节点，设置为0coordMaxWALSenders=($coordMaxWALsernder $coordMaxWALsernder) 数量保持和coordMasterServers一致coordSlave=n---- Datanodes ----------datanodeMasterDir=$pgxlDATA/nodes/dn_masterprimaryDatanode=xl1 主数据节点datanodeNames=(node1 node2)datanodePorts=(5433 5433) datanodePoolerPorts=(6668 6668) datanodePgHbaEntries=(0.0.0.0/0)datanodeMasterServers=(xl1 xl2)datanodeMasterDirs=($datanodeMasterDir $datanodeMasterDir)datanodeMaxWalSender=4datanodeMaxWALSenders=($datanodeMaxWalSender $datanodeMaxWalSender) 集群初始化，启动，停止 初始化 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all 输出结果： /bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existpg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord2" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ echo $PGHOME/home/postgres/pgxl[postgres@gtm ~]$ ll /home/postgres/pgxl/pgxc/nodes/gtm/gtm.^C[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.ERROR: target coordinator master coord1 is running now. Skip initilialization.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1ERROR: target coordinator master coord1 is already running now. Skip initialization.Starting coordinator master coord22019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv6 address "::", port 54322019-05-30 21:09:25.563 EDT [2148] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:09:25.601 EDT [2149] LOG: database system was shut down at 2019-05-30 21:09:22 EDT2019-05-30 21:09:25.605 EDT [2148] LOG: database system is ready to accept connections2019-05-30 21:09:25.612 EDT [2156] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.WARNING: datanode master datanode1 is running now. Skipping.Starting datanode master datanode2.2019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv6 address "::", port 154322019-05-30 21:09:33.355 EDT [2404] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:09:33.392 EDT [2404] LOG: redirecting log output to logging collector process2019-05-30 21:09:33.392 EDT [2404] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC stop coordinator master coord1Stopping coordinator master coord1.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.PGXC stop datanode master datanode1Stopping datanode master datanode1.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.PGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC monitor allNot running: gtm masterNot running: coordinator master coord1Not running: coordinator master coord2Not running: datanode master datanode1Not running: datanode master datanode2PGXC exit[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1Starting coordinator master coord22019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.000 EDT [25137] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.038 EDT [25138] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.042 EDT [25137] LOG: database system is ready to accept connections2019-05-30 21:13:04.049 EDT [25145] LOG: cluster monitor started2019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.021 EDT [2730] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.057 EDT [2731] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.061 EDT [2730] LOG: database system is ready to accept connections2019-05-30 21:13:04.062 EDT [2738] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.Starting datanode master datanode2.2019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.079 EDT [25392] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.114 EDT [25392] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.114 EDT [25392] HINT: Future log output will appear in directory "pg_log".2019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.081 EDT [2985] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.117 EDT [2985] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.117 EDT [2985] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done. 启动 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf start all 关闭 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all 查看集群状态 [postgres@gtm ~]$ pgxc_ctl monitor all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlRunning: gtm masterRunning: coordinator master coord1Running: coordinator master coord2Running: datanode master datanode1Running: datanode master datanode2 配置集群信息 分别在数据节点、协调器节点上分别执行以下命令： 注：本节点只执行修改操作即可(alert node)，其他节点执行创建命令(create node)。因为本节点已经包含本节点的信息。 create node coord1 with (type=coordinator,host=xl1, port=5432);create node coord2 with (type=coordinator,host=xl2, port=5432);alter node coord1 with (type=coordinator,host=xl1, port=5432);alter node coord2 with (type=coordinator,host=xl2, port=5432);create node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);create node datanode2 with (type=datanode, host=xl2,port=15432);alter node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);alter node datanode2 with (type=datanode, host=xl2,port=15432);select pgxc_pool_reload(); 分别登陆数据节点、协调器节点验证 postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633datanode2 | D | 15432 | xl2 | f | f | -905831925datanode1 | D | 15432 | xl1 | t | f | 888802358(4 rows) 测试 插入数据 在数据节点1，执行相关操作。 通过协调器端口登录PG [postgres@xl1 ~]$ psql -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= create database lei;CREATE DATABASEpostgres= \c lei;You are now connected to database "lei" as user "postgres".lei= create table test1(id int,name text);CREATE TABLElei= insert into test1(id,name) select generate_series(1,8),'测试';INSERT 0 8lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试3 | 测试4 | 测试7 | 测试(8 rows) 注：默认创建的表为分布式表，也就是每个数据节点值存储表的部分数据。关于表类型具体说明，下面有说明。 通过15432端口登录数据节点，查看数据 有5条数据 [postgres@xl1 ~]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试(5 rows) 登录到节点2，查看数据 有3条数据 [postgres@xl2 ~]$ psql -p15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------3 | 测试4 | 测试7 | 测试(3 rows) 两个节点的数据加起来整个8条，没有问题。 至此Postgre-XL集群搭建完成。 创建数据库、表时可能会出现以下错误： ERROR: Failed to get pooled connections 是因为pg_hba.conf配置不对，所有节点加上host all all 192.168.20.0/0 trust并重启集群即可。 ERROR: No Datanode defined in cluster 首先确认是否创建了数据节点，也就是create node相关的命令。如果创建了则执行select pgxc_pool_reload();使其生效即可。 集群管理与应用 表类型说明 REPLICATION表：各个datanode节点中，表的数据完全相同，也就是说，插入数据时，会分别在每个datanode节点插入相同数据。读数据时，只需要读任意一个datanode节点上的数据。 建表语法： CREATE TABLE repltab (col1 int, col2 int) DISTRIBUTE BY REPLICATION; DISTRIBUTE ：会将插入的数据，按照拆分规则，分配到不同的datanode节点中存储，也就是sharding技术。每个datanode节点只保存了部分数据，通过coordinate节点可以查询完整的数据视图。 CREATE TABLE disttab(col1 int, col2 int, col3 text) DISTRIBUTE BY HASH(col1); 模拟数据插入 任意登录一个coordinate节点进行建表操作 [postgres@gtm ~]$ psql -h xl1 -p 5432 -U postgrespostgres= INSERT INTO disttab SELECT generate_series(1,100), generate_series(101, 200), 'foo';INSERT 0 100postgres= INSERT INTO repltab SELECT generate_series(1,100), generate_series(101, 200);INSERT 0 100 查看数据分布结果： DISTRIBUTE表分布结果 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) REPLICATION表分布结果 postgres= SELECT count() FROM repltab;count -------100(1 row) 查看另一个datanode2中repltab表结果 [postgres@datanode2 pgxl9.5]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT count() FROM repltab;count -------100(1 row) 结论：REPLICATION表中，datanode1,datanode2中表是全部数据，一模一样。而DISTRIBUTE表，数据散落近乎平均分配到了datanode1,datanode2节点中。 新增数据节点与数据重分布 在线新增节点、并重新分布数据。 新增datanode节点 在gtm集群管理节点上执行pgxc_ctl命令 [postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC 在服务器xl3上，新增一个master角色的datanode节点，名称是datanode3 端口号暂定5430，pool master暂定6669 ，指定好数据目录位置，从两个节点升级到3个节点，之后要写3个none none应该是datanodeSpecificExtraConfig或者datanodeSpecificExtraPgHba配置PGXC add datanode master datanode3 xl3 15432 6671 /home/postgres/pgxc/nodes/datanode/datanode3 none none none 等待新增完成后，查询集群节点状态： postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------datanode1 | D | 15432 | xl1 | t | f | 888802358datanode2 | D | 15432 | xl2 | f | f | -905831925datanode3 | D | 15432 | xl3 | f | f | -705831925coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633(4 rows) 节点新增完毕 数据重新分布 由于新增节点后无法自动完成数据重新分布，需要手动操作。 DISTRIBUTE表分布在了node1,node2节点上，如下： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) 新增一个节点后，将sharding表数据重新分配到三个节点上，将repl表复制到新节点 重分布sharding表postgres= ALTER TABLE disttab ADD NODE (datanode3);ALTER TABLE 复制数据到新节点postgres= ALTER TABLE repltab ADD NODE (datanode3);ALTER TABLE 查看新的数据分布： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+--------700122826 | 36-927910690 | 321148549230 | 32(3 rows) 登录datanode3(新增的时候，放在了xl3服务器上，端口15432)节点查看数据： [postgres@gtm ~]$ psql -h xl3 -p 15432 -U postgrespsql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= select count() from repltab;count -------100(1 row) 很明显,通过 ALTER TABLE tt ADD NODE (dn)命令，可以将DISTRIBUTE表数据重新分布到新节点，重分布过程中会中断所有事务。可以将REPLICATION表数据复制到新节点。 从datanode节点中回收数据 postgres= ALTER TABLE disttab DELETE NODE (datanode3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (datanode3);ALTER TABLE 删除数据节点 Postgresql-XL并没有检查将被删除的datanode节点是否有replicated/distributed表的数据，为了数据安全，在删除之前需要检查下被删除节点上的数据，有数据的话，要回收掉分配到其他节点，然后才能安全删除。删除数据节点分为四步骤： 1.查询要删除节点dn3的oid postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316385 | node1 | D | 5433 | datanode1 | f | t | 114854923016386 | node2 | D | 5433 | datanode2 | f | f | -92791069016397 | dn3 | D | 5430 | datanode1 | f | f | -700122826(5 rows) 2.查询dn3对应的oid中是否有数据 testdb= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+-------------------16388 | H | 1 | 1 | 4096 | 16397 16385 1638616394 | R | 0 | 0 | 0 | 16397 16385 16386(2 rows) 3.有数据的先回收数据 postgres= ALTER TABLE disttab DELETE NODE (dn3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (dn3);ALTER TABLEpostgres= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+----------(0 rows) 4.安全删除dn3 PGXC$ remove datanode master dn3 clean 故障节点FAILOVER 1.查看当前集群状态 [postgres@gtm ~]$ psql -h xl1 -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11739 | coord1 | C | 5432 | xl1 | f | f | 188569664316384 | coord2 | C | 5432 | xl2 | f | f | -119710263316387 | datanode2 | D | 15432 | xl2 | f | f | -90583192516388 | datanode1 | D | 15432 | xl1 | t | t | 888802358(4 rows) 2.模拟datanode1节点故障 直接关闭即可 PGXC stop -m immediate datanode master datanode1Stopping datanode master datanode1.Done. 3.测试查询 只要查询涉及到datanode1上的数据，那么该查询就会报错 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;WARNING: failed to receive file descriptors for connectionsERROR: Failed to get pooled connectionsHINT: This may happen because one or more nodes are currently unreachable, either because of node or network failure.Its also possible that the target node may have hit the connection limit or the pooler is configured with low connections.Please check if all nodes are running fine and also review max_connections and max_pool_size configuration parameterspostgres= SELECT xc_node_id, FROM disttab WHERE col1 = 3;xc_node_id | col1 | col2 | col3------------+------+------+-------905831925 | 3 | 103 | foo(1 row) 测试发现，查询范围如果涉及到故障的node1节点，会报错，而查询的数据范围不在node1上的话，仍然可以查询。 4.手动切换 要想切换，必须要提前配置slave节点。 PGXC$ failover datanode node1 切换完成后，查询集群 postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316386 | node2 | D | 15432 | datanode2 | f | f | -92791069016385 | node1 | D | 15433 | datanode2 | f | t | 1148549230(4 rows) 发现datanode1节点的ip和端口都已经替换为配置的slave了。 本篇文章为转载内容。原文链接：https://blog.csdn.net/qianglei6077/article/details/94379331。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...amework 中的应用非常广泛，然而，较好地理解委托和事件对很多接触 C 时间不长的人来说并不容易。它们就像是一道槛儿，过了这个槛的人，觉得真是太容易了，而没有过去的人每次见到委托和事件就觉得心里堵得慌，浑身不自在。本章中，我将由浅入深地讲述什么是委托、为什么要使用委托、事件的由来、.NET Framework 中的委托和事件、委托中方法异常和超时的处理、委托与异步编程、委托和事件对Observer 设计模式的意义，对它们的编译代码也做了讨论。 1.1 理解委托 1.1.1 将方法作为方法的参数 我们先不管这个标题如何的绕口，也不管委托究竟是个什么东西，来看下面这两个最简单的方法，它们不过是在屏幕上输出一句问候的话语： public void GreetPeople(string name){EnglishGreeting(name);}public void EnglishGreeting(string name){Console.WriteLine("Good Morning, " + name);} 暂且不管这两个方法有没有什么实际意义。GreetPeople 用于向某人问好，当我们传递代表某人姓名的 name 参数，比如说“Liker”进去的时候，在这个方法中，将调用 EnglishGreeting 方法，再次传递 name 参数，EnglishGreeting 则用于向屏幕输出 “Good Morning, Liker”。 现在假设这个程序需要进行全球化，哎呀，不好了，我是中国人，我不明白“Good Morning”是什么意思，怎么办呢？好吧，我们再加个中文版的问候方法： public void ChineseGreeting(string name){Console.WriteLine("早上好, " + name);} 这时候，GreetPeople 也需要改一改了，不然如何判断到底用哪个版本的 Greeting 问候方法合适呢？在进行这个之前，我们最好再定义一个枚举作为判断的依据： public enum Language{English, Chinese}public void GreetPeople(string name, Language lang){switch (lang){case Language.English:EnglishGreeting(name);break;case Language.Chinese:ChineseGreeting(name);break;} } OK，尽管这样解决了问题，但我不说大家也很容易想到，这个解决方案的可扩展性很差，如果日后我们需要再添加韩文版、日文版，就不得不反复修改枚举和GreetPeople() 方法，以适应新的需求。 在考虑新的解决方案之前，我们先看看 GreetPeople 的方法签名： public void GreetPeople(string name, Language lang); 我们仅看 string name，在这里，string 是参数类型，name 是参数变量，当我们赋给 name 字符串“Liker”时，它就代表“Liker”这个值；当我们赋给它“李志中”时，它又代表着“李志中”这个值。然后，我们可以在方法体内对这个 name 进行其他操作。哎，这简直是废话么，刚学程序就知道了。 如果你再仔细想想，假如 GreetPeople() 方法可以接受一个参数变量，这个变量可以代表另一个方法，当我们给这个变量赋值 EnglishGreeting 的时候，它代表着 EnglsihGreeting() 这个方法；当我们给它赋值ChineseGreeting 的时候，它又代表着 ChineseGreeting() 法。我们将这个参数变量命名为 MakeGreeting，那么不是可以如同给 name 赋值时一样，在调用 GreetPeople()方法的时候，给这个MakeGreeting 参数也赋上值么(ChineseGreeting 或者EnglsihGreeting 等)？然后，我们在方法体内，也可以像使用别的参数一样使用MakeGreeting。但是，由于 MakeGreeting 代表着一个方法，它的使用方式应该和它被赋的方法(比如ChineseGreeting)是一样的，比如：MakeGreeting(name); 好了，有了思路了，我们现在就来改改GreetPeople()方法，那么它应该是这个样子了： public void GreetPeople(string name, MakeGreeting) { MakeGreeting(name); } 注意到 ，这个位置通常放置的应该是参数的类型，但到目前为止，我们仅仅是想到应该有个可以代表方法的参数，并按这个思路去改写 GreetPeople 方法，现在就出现了一个大问题：这个代表着方法的 MakeGreeting 参数应该是什么类型的？ 说明：这里已不再需要枚举了，因为在给MakeGreeting 赋值的时候动态地决定使用哪个方法，是 ChineseGreeting 还是 EnglishGreeting，而在这个两个方法内部，已经对使用“Good Morning”还是“早上好”作了区分。 聪明的你应该已经想到了，现在是委托该出场的时候了，但讲述委托之前，我们再看看MakeGreeting 参数所能代表的 ChineseGreeting()和EnglishGreeting()方法的签名： public void EnglishGreeting(string name) public void ChineseGreeting(string name) 如同 name 可以接受 String 类型的“true”和“1”，但不能接受bool 类型的true 和int 类型的1 一样。MakeGreeting 的参数类型定义应该能够确定 MakeGreeting 可以代表的方法种类，再进一步讲，就是 MakeGreeting 可以代表的方法的参数类型和返回类型。 于是，委托出现了：它定义了 MakeGreeting 参数所能代表的方法的种类，也就是 MakeGreeting 参数的类型。 本例中委托的定义： public delegate void GreetingDelegate(string name); 与上面 EnglishGreeting() 方法的签名对比一下，除了加入了delegate 关键字以外，其余的是不是完全一样？现在，让我们再次改动GreetPeople()方法，如下所示： public delegate void GreetingDelegate(string name);public void GreetPeople(string name, GreetingDelegate MakeGreeting){MakeGreeting(name);} 如你所见，委托 GreetingDelegate 出现的位置与 string 相同，string 是一个类型，那么 GreetingDelegate 应该也是一个类型，或者叫类(Class)。但是委托的声明方式和类却完全不同，这是怎么一回事？实际上，委托在编译的时候确实会编译成类。因为 Delegate 是一个类，所以在任何可以声明类的地方都可以声明委托。更多的内容将在下面讲述，现在，请看看这个范例的完整代码： public delegate void GreetingDelegate(string name);class Program{private static void EnglishGreeting(string name){Console.WriteLine("Good Morning, " + name);}private static void ChineseGreeting(string name){Console.WriteLine("早上好, " + name);}private static void GreetPeople(string name, GreetingDelegate MakeGreeting){MakeGreeting(name);}static void Main(string[] args){GreetPeople("Liker", EnglishGreeting);GreetPeople("李志中", ChineseGreeting);Console.ReadLine();} } 我们现在对委托做一个总结：委托是一个类，它定义了方法的类型，使得可以将方法当作另一个方法的参数来进行传递，这种将方法动态地赋给参数的做法，可以避免在程序中大量使用If … Else(Switch)语句，同时使得程序具有更好的可扩展性。 1.1.2 将方法绑定到委托 看到这里，是不是有那么点如梦初醒的感觉？于是，你是不是在想：在上面的例子中，我不一定要直接在 GreetPeople() 方法中给 name 参数赋值，我可以像这样使用变量： static void Main(string[] args){GreetPeople("Liker", EnglishGreeting);GreetPeople("李志中", ChineseGreeting);Console.ReadLine();} 而既然委托 GreetingDelegate 和类型 string 的地位一样，都是定义了一种参数类型，那么，我是不是也可以这么使用委托？ static void Main(string[] args){GreetingDelegate delegate1, delegate2;delegate1 = EnglishGreeting;delegate2 = ChineseGreeting;GreetPeople("Liker", delegate1);GreetPeople("李志中", delegate2);Console.ReadLine();} 如你所料，这样是没有问题的，程序一如预料的那样输出。这里，我想说的是委托不同于 string 的一个特性：可以将多个方法赋给同一个委托，或者叫将多个方法绑定到同一个委托，当调用这个委托的时候，将依次调用其所绑定的方法。在这个例子中，语法如下： static void Main(string[] args){GreetingDelegate delegate1;delegate1 = EnglishGreeting; delegate1 += ChineseGreeting;GreetPeople("Liker", delegate1);Console.ReadLine();} 实际上，我们可以也可以绕过GreetPeople 方法，通过委托来直接调用EnglishGreeting 和ChineseGreeting： static void Main(string[] args){GreetingDelegate delegate1;delegate1 = EnglishGreeting;delegate1 += ChineseGreeting; delegate1("Liker");Console.ReadLine();} 说明：这在本例中是没有问题的，但回头看下上面 GreetPeople() 的定义，在它之中可以做一些对于 EnglshihGreeting 和 ChineseGreeting 来说都需要进行的工作，为了简便我做了省略。 注意这里，第一次用的“=”，是赋值的语法；第二次，用的是“+=”，是绑定的语法。如果第一次就使用“+=”，将出现“使用了未赋值的局部变量”的编译错误。我们也可以使用下面的代码来这样简化这一过程： GreetingDelegate delegate1 = new GreetingDelegate(EnglishGreeting);delegate1 += ChineseGreeting; 既然给委托可以绑定一个方法，那么也应该有办法取消对方法的绑定，很容易想到，这个语法是“-=”： static void Main(string[] args){GreetingDelegate delegate1 = new GreetingDelegate(EnglishGreeting);delegate1 += ChineseGreeting;GreetPeople("Liker", delegate1);Console.WriteLine();delegate1 -= EnglishGreeting;GreetPeople("李志中", delegate1);Console.ReadLine();} 让我们再次对委托作个总结： 使用委托可以将多个方法绑定到同一个委托变量，当调用此变量时(这里用“调用”这个词，是因为此变量代表一个方法)，可以依次调用所有绑定的方法。 1.2 事件的由来 1.2.1 更好的封装性 我们继续思考上面的程序：上面的三个方法都定义在 Programe 类中，这样做是为了理解的方便，实际应用中，通常都是 GreetPeople 在一个类中，ChineseGreeting 和 EnglishGreeting 在另外的类中。现在你已经对委托有了初步了解，是时候对上面的例子做个改进了。假设我们将 GreetingPeople() 放在一个叫 GreetingManager 的类中，那么新程序应该是这个样子的： namespace Delegate{public delegate void GreetingDelegate(string name);public class GreetingManager{public void GreetPeople(string name, GreetingDelegate MakeGreeting){MakeGreeting(name);} }class Program{private static void EnglishGreeting(string name){Console.WriteLine("Good Morning, " + name);}private static void ChineseGreeting(string name){Console.WriteLine("早上好, " + name);}static void Main(string[] args){GreetingManager gm = new GreetingManager();gm.GreetPeople("Liker", EnglishGreeting);gm.GreetPeople("李志中", ChineseGreeting);} }} 我们运行这段代码，嗯，没有任何问题。程序一如预料地那样输出了： // Good Morning, Liker 早上好, 李志中 // 现在，假设我们需要使用上一节学到的知识，将多个方法绑定到同一个委托变量，该如何做呢？让我们再次改写代码： static void Main(string[] args){GreetingManager gm = new GreetingManager();GreetingDelegate delegate1;delegate1 = EnglishGreeting;delegate1 += ChineseGreeting;gm.GreetPeople("Liker", delegate1);} 输出： Good Morning, Liker 早上好, Liker 到了这里，我们不禁想到：面向对象设计，讲究的是对象的封装，既然可以声明委托类型的变量(在上例中是delegate1)，我们何不将这个变量封装到 GreetManager 类中？在这个类的客户端中使用不是更方便么？于是，我们改写GreetManager 类，像这样： public class GreetingManager{/// <summary>/// 在 GreetingManager 类的内部声明 delegate1 变量/// </summary>public GreetingDelegate delegate1;public void GreetPeople(string name, GreetingDelegate MakeGreeting){MakeGreeting(name);} } 现在，我们可以这样使用这个委托变量： static void Main(string[] args){GreetingManager gm = new GreetingManager();gm.delegate1 = EnglishGreeting;gm.delegate1 += ChineseGreeting;gm.GreetPeople("Liker", gm.delegate1);} 输出为： Good Morning, Liker 早上好, Liker 尽管这样做没有任何问题，但我们发现这条语句很奇怪。在调用gm.GreetPeople 方法的时候，再次传递了gm 的delegate1 字段, 既然如此，我们何不修改 GreetingManager 类成这样： public class GreetingManager{/// <summary>/// 在 GreetingManager 类的内部声明 delegate1 变量/// </summary>public GreetingDelegate delegate1;public void GreetPeople(string name){if (delegate1 != null) // 如果有方法注册委托变量{ delegate1(name); // 通过委托调用方法} }} 在客户端，调用看上去更简洁一些： static void Main(string[] args){GreetingManager gm = new GreetingManager();gm.delegate1 = EnglishGreeting;gm.delegate1 += ChineseGreeting;gm.GreetPeople("Liker"); //注意，这次不需要再传递 delegate1 变量} 尽管这样达到了我们要的效果，但是还是存在着问题：在这里，delegate1 和我们平时用的string 类型的变量没有什么分别，而我们知道，并不是所有的字段都应该声明成public，合适的做法是应该public 的时候public，应该private 的时候private。 我们先看看如果把 delegate1 声明为 private 会怎样？结果就是：这简直就是在搞笑。因为声明委托的目的就是为了把它暴露在类的客户端进行方法的注册，你把它声明为 private 了，客户端对它根本就不可见，那它还有什么用？ 再看看把delegate1 声明为 public 会怎样？结果就是：在客户端可以对它进行随意的赋值等操作，严重破坏对象的封装性。 最后，第一个方法注册用“=”，是赋值语法，因为要进行实例化，第二个方法注册则用的是“+=”。但是，不管是赋值还是注册，都是将方法绑定到委托上，除了调用时先后顺序不同，再没有任何的分别，这样不是让人觉得很别扭么？ 现在我们想想，如果delegate1 不是一个委托类型，而是一个string 类型，你会怎么做？答案是使用属性对字段进行封装。 于是，Event 出场了，它封装了委托类型的变量，使得：在类的内部，不管你声明它是public还是protected，它总是private 的。在类的外部，注册“+=”和注销“-=”的访问限定符与你在声明事件时使用的访问符相同。我们改写GreetingManager 类，它变成了这个样子： public class GreetingManager{//这一次我们在这里声明一个事件public event GreetingDelegate MakeGreet;public void GreetPeople(string name){MakeGreet(name);} } 很容易注意到：MakeGreet 事件的声明与之前委托变量 delegate1 的声明唯一的区别是多了一个 event 关键字。看到这里，在结合上面的讲解，你应该明白到：事件其实没什么不好理解的，声明一个事件不过类似于声明一个进行了封装的委托类型的变量而已。 为了证明上面的推论，如果我们像下面这样改写Main 方法： static void Main(string[] args){GreetingManager gm = new GreetingManager();gm.MakeGreet = EnglishGreeting; // 编译错误1gm.MakeGreet += ChineseGreeting;gm.GreetPeople("Liker");} 会得到编译错误： 1.2.2 限制类型能力 使用事件不仅能获得比委托更好的封装性以外，还能限制含有事件的类型的能力。这是什么意思呢？它的意思是说：事件应该由事件发布者触发，而不应该由事件的客户端（客户程序）来触发。请看下面的范例： using System;class Program{static void Main(string[] args){Publishser pub = new Publishser();Subscriber sub = new Subscriber();pub.NumberChanged += new NumberChangedEventHandler(sub.OnNumberChanged);pub.DoSomething(); // 应该通过DoSomething()来触发事件pub.NumberChanged(100); // 但可以被这样直接调用，对委托变量的不恰当使用} }/// <summary>/// 定义委托/// </summary>/// <param name="count"></param>public delegate void NumberChangedEventHandler(int count);/// <summary>/// 定义事件发布者/// </summary>public class Publishser{private int count;public NumberChangedEventHandler NumberChanged; // 声明委托变量//public event NumberChangedEventHandler NumberChanged; // 声明一个事件public void DoSomething(){// 在这里完成一些工作 ...if (NumberChanged != null) // 触发事件{ count++;NumberChanged(count);} }}/// <summary>/// 定义事件订阅者/// </summary>public class Subscriber{public void OnNumberChanged(int count){Console.WriteLine("Subscriber notified: count = {0}", count);} } 上面代码定义了一个NumberChangedEventHandler 委托，然后我们创建了事件的发布者Publisher 和订阅者Subscriber。当使用委托变量时，客户端可以直接通过委托变量触发事件，也就是直接调用pub.NumberChanged(100)，这将会影响到所有注册了该委托的订阅者。而事件的本意应该为在事件发布者在其本身的某个行为中触发，比如说在方法DoSomething()中满足某个条件后触发。通过添加event 关键字来发布事件，事件发布者的封装性会更好，事件仅仅是供其他类型订阅，而客户端不能直接触发事件（语句pub.NumberChanged(100)无法通过编译），事件只能在事件发布者Publisher 类的内部触发（比如在方法pub.DoSomething()中），换言之，就是NumberChanged(100)语句只能在Publisher 内部被调用。大家可以尝试一下，将委托变量的声明那行代码注释掉，然后取消下面事件声明的注释。此时程序是无法编译的，当你使用了event 关键字之后，直接在客户端触发事件这种行为，也就是直接调用pub.NumberChanged(100)，是被禁止的。事件只能通过调用DoSomething() 来触发。这样才是事件的本意，事件发布者的封装才会更好。 就好像如果我们要定义一个数字类型，我们会使用int 而不是使用object 一样，给予对象过多的能力并不见得是一件好事，应该是越合适越好。尽管直接使用委托变量通常不会有什么问题，但它给了客户端不应具有的能力，而使用事件，可以限制这一能力，更精确地对类型进行封装。 说 明：这里还有一个约定俗称的规定，就是订阅事件的方法的命名，通常为“On 事件名”，比如这里的OnNumberChanged。 1.3 委托的编译代码 这时候，我们注释掉编译错误的行，然后重新进行编译，再借助 Reflactor 来对 event 的声明语句做一探究，看看为什么会发生这样的错误： 可以看到，实际上尽管我们在GreetingManager 里将 MakeGreet 声明为public，但是，实际上MakeGreet 会被编译成私有字段，难怪会发生上面的编译错误了，因为它根本就不允许在GreetingManager 类的外面以赋值的方式访问，从而验证了我们上面所做的推论。 我们再进一步看下MakeGreet 所产生的代码： // private GreetingDelegate MakeGreet; //对事件的声明实际是声明一个私有的委托变量 [MethodImpl(MethodImplOptions.Synchronized)] public void add_MakeGreet(GreetingDelegate value) { this.MakeGreet = (GreetingDelegate) Delegate.Combine(this.MakeGreet, value); } [MethodImpl(MethodImplOptions.Synchronized)] public void remove_MakeGreet(GreetingDelegate value) { this.MakeGreet = (GreetingDelegate) Delegate.Remove(this.MakeGreet, value); } // 现在已经很明确了：MakeGreet 事件确实是一个GreetingDelegate 类型的委托，只不过不管是不是声明为public，它总是被声明为private。另外，它还有两个方法，分别是add_MakeGreet和remove_MakeGreet，这两个方法分别用于注册委托类型的方法和取消注册。实际上也就是：“+= ”对应 add_MakeGreet，“-=”对应remove_MakeGreet。而这两个方法的访问限制取决于声明事件时的访问限制符。 在add_MakeGreet()方法内部，实际上调用了System.Delegate 的Combine()静态方法，这个方法用于将当前的变量添加到委托链表中。 我们前面提到过两次，说委托实际上是一个类，在我们定义委托的时候： // public delegate void GreetingDelegate(string name); // 当编译器遇到这段代码的时候，会生成下面这样一个完整的类： // public class GreetingDelegate:System.MulticastDelegate { public GreetingDelegate(object @object, IntPtr method); public virtual IAsyncResult BeginInvoke(string name, AsyncCallback callback, object @object); public virtual void EndInvoke(IAsyncResult result); public virtual void Invoke(string name); } // 1.4 .NET 框架中的委托和事件 1.4.1 范例说明 上面的例子已不足以再进行下面的讲解了，我们来看一个新的范例，因为之前已经介绍了很多的内容，所以本节的进度会稍微快一些! 假设我们有个高档的热水器，我们给它通上电，当水温超过95 度的时候：1、扬声器会开始发出语音，告诉你水的温度；2、液晶屏也会改变水温的显示，来提示水已经快烧开了。 现在我们需要写个程序来模拟这个烧水的过程，我们将定义一个类来代表热水器，我们管它叫：Heater，它有代表水温的字段，叫做 temperature；当然，还有必不可少的给水加热方法 BoilWater()，一个发出语音警报的方法 MakeAlert()，一个显示水温的方法，ShowMsg()。 namespace Delegate{/// <summary>/// 热水器/// </summary>public class Heater{/// <summary>/// 水温/// </summary>private int temperature;/// <summary>/// 烧水/// </summary>public void BoilWater(){for (int i = 0; i <= 100; i++){temperature = i;if (temperature > 95){MakeAlert(temperature);ShowMsg(temperature);} }}/// <summary>/// 发出语音警报/// </summary>/// <param name="param"></param>private void MakeAlert(int param){Console.WriteLine("Alarm：嘀嘀嘀，水已经 {0} 度了：", param);}/// <summary>/// 显示水温/// </summary>/// <param name="param"></param>private void ShowMsg(int param){Console.WriteLine("Display：水快开了，当前温度：{0}度。", param);} }class Program{static void Main(){Heater ht = new Heater();ht.BoilWater();} }} 1.4.2 Observer 设计模式简介 上面的例子显然能完成我们之前描述的工作，但是却并不够好。现在假设热水器由三部分组成：热水器、警报器、显示器，它们来自于不同厂商并进行了组装。那么，应该是热水器仅仅负责烧水，它不能发出警报也不能显示水温；在水烧开时由警报器发出警报、显示器显示提示和水温。 这时候，上面的例子就应该变成这个样子： /// <summary>/// 热水器/// </summary>public class Heater{private int temperature; private void BoilWater(){for (int i = 0; i <= 100; i++){temperature = i;} }}/// <summary>/// 警报器/// </summary>public class Alarm{private void MakeAlert(int param){Console.WriteLine("Alarm：嘀嘀嘀，水已经 {0} 度了：", param);} }/// <summary>/// 显示器/// </summary>public class Display{private void ShowMsg(int param){Console.WriteLine("Display：水已烧开，当前温度：{0}度。", param);} } 这里就出现了一个问题：如何在水烧开的时候通知报警器和显示器？ 在继续进行之前，我们先了解一下Observer 设计模式，Observer 设计模式中主要包括如下两类对象： Subject：监视对象，它往往包含着其他对象所感兴趣的内容。在本范例中，热水器就是一个监视对象，它包含的其他对象所感兴趣的内容，就是 temprature 字段，当这个字段的值快到100 时，会不断把数据发给监视它的对象。 Observer：监视者，它监视Subject，当 Subject 中的某件事发生的时候，会告知Observer，而Observer 则会采取相应的行动。在本范例中，Observer 有警报器和显示器，它们采取的行动分别是发出警报和显示水温。 在本例中，事情发生的顺序应该是这样的： 1. 警报器和显示器告诉热水器，它对它的温度比较感兴趣(注册)。 2. 热水器知道后保留对警报器和显示器的引用。 3. 热水器进行烧水这一动作，当水温超过 95 度时，通过对警报器和显示器的引用，自动调用警报器的MakeAlert()方法、显示器的ShowMsg()方法。 类似这样的例子是很多的，GOF 对它进行了抽象，称为 Observer 设计模式：Observer 设计模式是为了定义对象间的一种一对多的依赖关系，以便于当一个对象的状态改变时，其他依赖于它的对象会被自动告知并更新。Observer 模式是一种松耦合的设计模式。 1.4.3 实现范例的Observer 设计模式 我们之前已经对委托和事件介绍很多了，现在写代码应该很容易了，现在在这里直接给出代码，并在注释中加以说明。 namespace Delegate{public class Heater{private int temperature;public delegate void BoilHandler(int param);public event BoilHandler BoilEvent;public void BoilWater(){for (int i = 0; i <= 100; i++){temperature = i;if (temperature > 95){if (BoilEvent != null){ BoilEvent(temperature); // 调用所有注册对象的方法} }} }}public class Alarm{public void MakeAlert(int param){Console.WriteLine("Alarm：嘀嘀嘀，水已经 {0} 度了：", param);} }public class Display{public static void ShowMsg(int param) // 静态方法{ Console.WriteLine("Display：水快烧开了，当前温度：{0}度。", param);} }class Program{static void Main(){Heater heater = new Heater();Alarm alarm = new Alarm();heater.BoilEvent += alarm.MakeAlert; // 注册方法heater.BoilEvent += (new Alarm()).MakeAlert; // 给匿名对象注册方法heater.BoilEvent += Display.ShowMsg; // 注册静态方法heater.BoilWater(); // 烧水，会自动调用注册过对象的方法} }} 输出为： // Alarm：嘀嘀嘀，水已经 96 度了： Alarm：嘀嘀嘀，水已经 96 度了： Display：水快烧开了，当前温度：96 度。 // 省略... // 1.4.4 .NET 框架中的委托与事件 尽管上面的范例很好地完成了我们想要完成的工作，但是我们不仅疑惑：为什么.NET Framework 中的事件模型和上面的不同？为什么有很多的EventArgs 参数？ 在回答上面的问题之前，我们先搞懂 .NET Framework 的编码规范： 1. 委托类型的名称都应该以 EventHandler 结束。 2. 委托的原型定义：有一个void 返回值，并接受两个输入参数：一个Object 类型，一个EventArgs 类型(或继承自EventArgs)。 3. 事件的命名为委托去掉 EventHandler 之后剩余的部分。 4. 继承自 EventArgs 的类型应该以EventArgs 结尾。 再做一下说明： 1. 委托声明原型中的Object 类型的参数代表了Subject，也就是监视对象，在本例中是Heater(热水器)。回调函数(比如Alarm 的MakeAlert)可以通过它访问触发事件的对象(Heater)。 2. EventArgs 对象包含了Observer 所感兴趣的数据，在本例中是temperature。 上面这些其实不仅仅是为了编码规范而已，这样也使得程序有更大的灵活性。比如说，如果我们不光想获得热水器的温度，还想在Observer 端(警报器或者显示器)方法中获得它的生产日期、型号、价格，那么委托和方法的声明都会变得很麻烦，而如果我们将热水器的引用传给警报器的方法，就可以在方法中直接访问热水器了。 现在我们改写之前的范例，让它符合.NET Framework的规范： using System;using System.Collections.Generic;using System.Text;namespace Delegate{public class Heater{private int temperature;public string type = "RealFire 001"; // 添加型号作为演示public string area = "China Xian"; // 添加产地作为演示public delegate void BoiledEventHandler(Object sender, BoiledEventArgs e);public event BoiledEventHandler Boiled; // 声明事件// 定义 BoiledEventArgs 类，传递给 Observer 所感兴趣的信息public class BoiledEventArgs : EventArgs{public readonly int temperature;public BoiledEventArgs(int temperature){this.temperature = temperature;} }// 可以供继承自 Heater 的类重写，以便继承类拒绝其他对象对它的监视protected virtual void OnBoiled(BoiledEventArgs e){if (Boiled != null){Boiled(this, e); // 调用所有注册对象的方法} }public void BoilWater(){for (int i = 0; i <= 100; i++){temperature = i;if (temperature > 95){// 建立BoiledEventArgs 对象。BoiledEventArgs e = new BoiledEventArgs(temperature);OnBoiled(e); // 调用 OnBolied 方法} }}public class Alarm{public void MakeAlert(Object sender, Heater.BoiledEventArgs e){Heater heater = (Heater)sender; // 这里是不是很熟悉呢？// 访问 sender 中的公共字段Console.WriteLine("Alarm：{0} - {1}: ", heater.area, heater.type);Console.WriteLine("Alarm: 嘀嘀嘀，水已经 {0} 度了：", e.temperature);Console.WriteLine();} }public class Display{public static void ShowMsg(Object sender, Heater.BoiledEventArgs e) // 静态方法{Heater heater = (Heater)sender;Console.WriteLine("Display：{0} - {1}: ", heater.area, heater.type);Console.WriteLine("Display：水快烧开了，当前温度：{0}度。", e.temperature);Console.WriteLine();} }class Program{static void Main(){Heater heater = new Heater();Alarm alarm = new Alarm();heater.Boiled += alarm.MakeAlert; //注册方法heater.Boiled += (new Alarm()).MakeAlert; //给匿名对象注册方法heater.Boiled += new Heater.BoiledEventHandler(alarm.MakeAlert); //也可以这么注册heater.Boiled += Display.ShowMsg; //注册静态方法heater.BoilWater(); //烧水，会自动调用注册过对象的方法} }} } 输出为： Alarm：China Xian - RealFire 001: Alarm: 嘀嘀嘀，水已经 96 度了： Alarm：China Xian - RealFire 001: Alarm: 嘀嘀嘀，水已经 96 度了： Alarm：China Xian - RealFire 001: Alarm: 嘀嘀嘀，水已经 96 度了： Display：China Xian - RealFire 001: Display：水快烧开了，当前温度：96 度。 // 省略 ... 1.5 委托进阶 1.5.1 为什么委托定义的返回值通常都为 void ？ 尽管并非必需，但是我们发现很多的委托定义返回值都为 void，为什么呢？这是因为委托变量可以供多个订阅者注册，如果定义了返回值，那么多个订阅者的方法都会向发布者返回数值，结果就是后面一个返回的方法值将前面的返回值覆盖掉了，因此，实际上只能获得最后一个方法调用的返回值。可以运行下面的代码测试一下。除此以外，发布者和订阅者是松耦合的，发布者根本不关心谁订阅了它的事件、为什么要订阅，更别说订阅者的返回值了，所以返回订阅者的方法返回值大多数情况下根本没有必要。 1.5.2 如何让事件只允许一个客户订阅？ 少数情况下，比如像上面，为了避免发生“值覆盖”的情况（更多是在异步调用方法时，后面会讨论），我们可能想限制只允许一个客户端注册。此时怎么做呢？我们可以向下面这样，将事件声明为private 的，然后提供两个方法来进行注册和取消注册： public class Publishser{private event GeneralEventHandler NumberChanged; // 声明一个私有事件// 注册事件public void Register(GeneralEventHandler method){NumberChanged = method;}// 取消注册public void UnRegister(GeneralEventHandler method){NumberChanged -= method;}public void DoSomething(){// 做某些其余的事情if (NumberChanged != null){ // 触发事件string rtn = NumberChanged();Console.WriteLine("Return: {0}", rtn); // 打印返回的字符串，输出为Subscriber3} }} 注意上面，在UnRegister()中，没有进行任何判断就使用了NumberChanged -= method 语句。这是因为即使method 方法没有进行过注册，此行语句也不会有任何问题，不会抛出异常，仅仅是不会产生任何效果而已。 注意在Register()方法中，我们使用了赋值操作符“=”，而非“+=”，通过这种方式就避免了多个方法注册。 1.7 委托和方法的异步调用 通常情况下，如果需要异步执行一个耗时的操作，我们会新起一个线程，然后让这个线程去执行代码。但是对于每一个异步调用都通过创建线程来进行操作显然会对性能产生一定的影响，同时操作也相对繁琐一些。.NET 中可以通过委托进行方法的异步调用，就是说客户端在异步调用方法时，本身并不会因为方法的调用而中断，而是从线程池中抓取一个线程去执行该方法，自身线程（主线程）在完成抓取线程这一过程之后，继续执行下面的代码，这样就实现了代码的并行执行。使用线程池的好处就是避免了频繁进行异步调用时创建、销毁线程的开销。当我们在委托对象上调用BeginInvoke()时，便进行了一个异步的方法调用。 事件发布者和订阅者之间往往是松耦合的，发布者通常不需要获得订阅者方法执行的情况；而当使用异步调用时，更多情况下是为了提升系统的性能，而并非专用于事件的发布和订阅这一编程模型。而在这种情况下使用异步编程时，就需要进行更多的控制，比如当异步执行方法的方法结束时通知客户端、返回异步执行方法的返回值等。本节就对 BeginInvoke() 方法、EndInvoke() 方法和其相关的 IAysncResult 做一个简单的介绍。 我们先看这样一段代码，它演示了不使用异步调用的通常情况： class Program7{static void Main(string[] args){Console.WriteLine("Client application started!\n");Thread.CurrentThread.Name = "Main Thread";Calculator cal = new Calculator();int result = cal.Add(2, 5);Console.WriteLine("Result: {0}\n", result);// 做某些其它的事情，模拟需要执行3 秒钟for (int i = 1; i <= 3; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Client executed {1} second(s).", Thread.CurrentThread.Name, i);}Console.WriteLine("\nPress any key to exit...");Console.ReadLine();} }public class Calculator{public int Add(int x, int y){if (Thread.CurrentThread.IsThreadPoolThread){Thread.CurrentThread.Name = "Pool Thread";}Console.WriteLine("Method invoked!");// 执行某些事情，模拟需要执行2 秒钟for (int i = 1; i <= 2; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Add executed {1} second(s).", Thread.CurrentThread.Name, i);}Console.WriteLine("Method complete!");return x + y;} } 上面代码有几个关于对于线程的操作，如果不了解可以看一下下面的说明，如果你已经了解可以直接跳过： 1. Thread.Sleep()，它会让执行当前代码的线程暂停一段时间（如果你对线程的概念比较陌生，可以理解为使程序的执行暂停一段时间），以毫秒为单位，比如Thread.Sleep(1000)，将会使线程暂停1 秒钟。在上面我使用了它的重载方法，个人觉得使用TimeSpan.FromSeconds(1)，可读性更好一些。 2. Thread.CurrentThread.Name，通过这个属性可以设置、获取执行当前代码的线程的名称，值得注意的是这个属性只可以设置一次，如果设置两次，会抛出异常。 3. Thread.IsThreadPoolThread，可以判断执行当前代码的线程是否为线程池中的线程。 通过这几个方法和属性，有助于我们更好地调试异步调用方法。上面代码中除了加入了一些对线程的操作以外再没有什么特别之处。我们建了一个Calculator 类，它只有一个Add 方法，我们模拟了这个方法需要执行2 秒钟时间，并且每隔一秒进行一次输出。而在客户端程序中，我们使用result 变量保存了方法的返回值并进行了打印。随后，我们再次模拟了客户端程序接下来的操作需要执行2 秒钟时间。运行这段程序，会产生下面的输出： // Client application started! Method invoked! Main Thread: Add executed 1 second(s). Main Thread: Add executed 2 second(s). Method complete! Result: 7 Main Thread: Client executed 1 second(s). Main Thread: Client executed 2 second(s). Main Thread: Client executed 3 second(s). Press any key to exit... // 如果你确实执行了这段代码，会看到这些输出并不是一瞬间输出的，而是执行了大概5 秒钟的时间，因为线程是串行执行的，所以在执行完 Add() 方法之后才会继续客户端剩下的代码。 接下来我们定义一个AddDelegate 委托，并使用BeginInvoke()方法来异步地调用它。在上面已经介绍过，BeginInvoke()除了最后两个参数为AsyncCallback 类型和Object 类型以外，前面的参数类型和个数与委托定义相同。另外BeginInvoke()方法返回了一个实现了IAsyncResult 接口的对象（实际上就是一个AsyncResult 类型实例，注意这里IAsyncResult 和AysncResult 是不同的，它们均包含在.NET Framework 中）。 AsyncResult 的用途有这么几个：传递参数，它包含了对调用了BeginInvoke()的委托的引用；它还包含了BeginInvoke()的最后一个Object 类型的参数；它可以鉴别出是哪个方法的哪一次调用，因为通过同一个委托变量可以对同一个方法调用多次。 EndInvoke()方法接受IAsyncResult 类型的对象（以及ref 和out 类型参数，这里不讨论了，对它们的处理和返回值类似），所以在调用BeginInvoke()之后，我们需要保留IAsyncResult，以便在调用EndInvoke()时进行传递。这里最重要的就是EndInvoke()方法的返回值，它就是方法的返回值。除此以外，当客户端调用EndInvoke()时，如果异步调用的方法没有执行完毕，则会中断当前线程而去等待该方法，只有当异步方法执行完毕后才会继续执行后面的代码。所以在调用完BeginInvoke()后立即执行EndInvoke()是没有任何意义的。我们通常在尽可能早的时候调用BeginInvoke()，然后在需要方法的返回值的时候再去调用EndInvoke()，或者是根据情况在晚些时候调用。说了这么多，我们现在看一下使用异步调用改写后上面的代码吧： using System.Threading;using System;public delegate int AddDelegate(int x, int y);class Program8{static void Main(string[] args){Console.WriteLine("Client application started!\n");Thread.CurrentThread.Name = "Main Thread";Calculator cal = new Calculator();AddDelegate del = new AddDelegate(cal.Add);IAsyncResult asyncResult = del.BeginInvoke(2, 5, null, null); // 异步调用方法// 做某些其它的事情，模拟需要执行3 秒钟for (int i = 1; i <= 3; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Client executed {1} second(s).", Thread.CurrentThread.Name, i);}int rtn = del.EndInvoke(asyncResult);Console.WriteLine("Result: {0}\n", rtn);Console.WriteLine("\nPress any key to exit...");Console.ReadLine();} }public class Calculator{public int Add(int x, int y){if (Thread.CurrentThread.IsThreadPoolThread){Thread.CurrentThread.Name = "Pool Thread";}Console.WriteLine("Method invoked!");// 执行某些事情，模拟需要执行2 秒钟for (int i = 1; i <= 2; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Add executed {1} second(s).", Thread.CurrentThread.Name, i);}Console.WriteLine("Method complete!");return x + y;} } 此时的输出为： // Client application started! Method invoked! Main Thread: Client executed 1 second(s). Pool Thread: Add executed 1 second(s). Main Thread: Client executed 2 second(s). Pool Thread: Add executed 2 second(s). Method complete! Main Thread: Client executed 3 second(s). Result: 7 Press any key to exit... // 现在执行完这段代码只需要3 秒钟时间，两个for 循环所产生的输出交替进行，这也说明了这两段代码并行执行的情况。可以看到Add() 方法是由线程池中的线程在执行， 因为Thread.CurrentThread.IsThreadPoolThread 返回了True，同时我们对该线程命名为了Pool Thread。另外我们可以看到通过EndInvoke()方法得到了返回值。有时候，我们可能会将获得返回值的操作放到另一段代码或者客户端去执行，而不是向上面那样直接写在BeginInvoke()的后面。比如说我们在Program 中新建一个方法GetReturn()，此时可以通过AsyncResult 的AsyncDelegate 获得del 委托对象，然后再在其上调用EndInvoke()方法，这也说明了AsyncResult 可以唯一的获取到与它相关的调用了的方法（或者也可以理解成委托对象）。所以上面获取返回值的代码也可以改写成这样： private static int GetReturn(IAsyncResult asyncResult){AsyncResult result = (AsyncResult)asyncResult;AddDelegate del = (AddDelegate)result.AsyncDelegate;int rtn = del.EndInvoke(asyncResult);return rtn;} 然后再将int rtn = del.EndInvoke(asyncResult);语句改为int rtn = GetReturn(asyncResult);。注意上面IAsyncResult 要转换为实际的类型AsyncResult 才能访问AsyncDelegate 属性，因为它没有包含在IAsyncResult 接口的定义中。 BeginInvoke 的另外两个参数分别是AsyncCallback 和Object 类型，其中AsyncCallback 是一个委托类型，它用于方法的回调，即是说当异步方法执行完毕时自动进行调用的方法。它的定义为： // public delegate void AsyncCallback(IAsyncResult ar); // Object 类型用于传递任何你想要的数值，它可以通过IAsyncResult 的AsyncState 属性获得。下面我们将获取方法返回值、打印返回值的操作放到了OnAddComplete()回调方法中： using System.Threading;using System;using System.Runtime.Remoting.Messaging;public delegate int AddDelegate(int x, int y);class Program9{static void Main(string[] args){Console.WriteLine("Client application started!\n");Thread.CurrentThread.Name = "Main Thread";Calculator cal = new Calculator();AddDelegate del = new AddDelegate(cal.Add);string data = "Any data you want to pass.";AsyncCallback callBack = new AsyncCallback(OnAddComplete);del.BeginInvoke(2, 5, callBack, data); // 异步调用方法// 做某些其它的事情，模拟需要执行3 秒钟for (int i = 1; i <= 3; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Client executed {1} second(s).", Thread.CurrentThread.Name, i);}Console.WriteLine("\nPress any key to exit...");Console.ReadLine();}static void OnAddComplete(IAsyncResult asyncResult){AsyncResult result = (AsyncResult)asyncResult;AddDelegate del = (AddDelegate)result.AsyncDelegate;string data = (string)asyncResult.AsyncState;int rtn = del.EndInvoke(asyncResult);Console.WriteLine("{0}: Result, {1}; Data: {2}\n", Thread.CurrentThread.Name, rtn, data);} }public class Calculator{public int Add(int x, int y){if (Thread.CurrentThread.IsThreadPoolThread){Thread.CurrentThread.Name = "Pool Thread";}Console.WriteLine("Method invoked!");// 执行某些事情，模拟需要执行2 秒钟for (int i = 1; i <= 2; i++){Thread.Sleep(TimeSpan.FromSeconds(i));Console.WriteLine("{0}: Add executed {1} second(s).", Thread.CurrentThread.Name, i);}Console.WriteLine("Method complete!");return x + y;} } 它产生的输出为： Client application started! Method invoked! Main Thread: Client executed 1 second(s). Pool Thread: Add executed 1 second(s). Main Thread: Client executed 2 second(s). Pool Thread: Add executed 2 second(s). Method complete! Pool Thread: Result, 7; Data: Any data you want to pass. Main Thread: Client executed 3 second(s). Press any key to exit... 这里有几个值得注意的地方： 1、我们在调用BeginInvoke()后不再需要保存IAysncResult 了，因为AysncCallback 委托将该对象定义在了回调方法的参数列表中； 2、我们在OnAddComplete()方法中获得了调用BeginInvoke()时最后一个参数传递的值，字符串“Any data you want to pass”； 3、执行回调方法的线程并非客户端线程Main Thread，而是来自线程池中的线程Pool Thread。另外如前面所说，在调用EndInvoke()时有可能会抛出异常，所以在应该将它放到try/catch 块中，这里就不再示范了。 1.8 总结 我们详细地讨论了C中的委托和事件，包括什么是委托、为什么要使用委托、事件的由来、.NET Framework 中的委托和事件、委托中方法异常和超时的处理、委托与异步编程、委托和事件对Observer 设计模式的意义。拥有了本章的知识，相信你以后遇到委托和事件时，将不会再有所畏惧。 本篇文章为转载内容。原文链接：https://blog.csdn.net/beyonddeg/article/details/53528482。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

... Streaming应用程序就会去Kafka中Pull数据过来进行计算和消费，并把计算后的数据放入到持久化系统中（MySQL） 广告点击系统实时分析的意义：因为可以在线实时的看见广告的投放效果，就为广告的更大规模的投入和调整打下了坚实的基础，从而为公司带来最大化的经济回报。 核心需求： 1、实时黑名单动态过滤出有效的用户广告点击行为：因为黑名单用户可能随时出现，所以需要动态更新； 2、在线计算广告点击流量； 3、Top3热门广告； 4、每个广告流量趋势； 5、广告点击用户的区域分布分析 6、最近一分钟的广告点击量； 7、整个广告点击Spark Streaming处理程序724小时运行； 数据格式： 时间、用户、广告、城市等 技术细节： 在线计算用户点击的次数分析，屏蔽IP等； 使用updateStateByKey或者mapWithState进行不同地区广告点击排名的计算； Spark Streaming+Spark SQL+Spark Core等综合分析数据； 使用Window类型的操作； 高可用和性能调优等等； 流量趋势，一般会结合DB等； Spark Core / /package com.tom.spark.SparkApps.sparkstreaming;import java.util.Date;import java.util.HashMap;import java.util.Map;import java.util.Properties;import java.util.Random;import kafka.javaapi.producer.Producer;import kafka.producer.KeyedMessage;import kafka.producer.ProducerConfig;/ 数据生成代码，Kafka Producer产生数据/public class MockAdClickedStat {/ @param args/public static void main(String[] args) {final Random random = new Random();final String[] provinces = new String[]{"Guangdong", "Zhejiang", "Jiangsu", "Fujian"};final Map<String, String[]> cities = new HashMap<String, String[]>();cities.put("Guangdong", new String[]{"Guangzhou", "Shenzhen", "Dongguan"});cities.put("Zhejiang", new String[]{"Hangzhou", "Wenzhou", "Ningbo"});cities.put("Jiangsu", new String[]{"Nanjing", "Suzhou", "Wuxi"});cities.put("Fujian", new String[]{"Fuzhou", "Xiamen", "Sanming"});final String[] ips = new String[] {"192.168.112.240","192.168.112.239","192.168.112.245","192.168.112.246","192.168.112.247","192.168.112.248","192.168.112.249","192.168.112.250","192.168.112.251","192.168.112.252","192.168.112.253","192.168.112.254",};/ Kafka相关的基本配置信息/Properties kafkaConf = new Properties();kafkaConf.put("serializer.class", "kafka.serializer.StringEncoder");kafkaConf.put("metadeta.broker.list", "Master:9092,Worker1:9092,Worker2:9092");ProducerConfig producerConfig = new ProducerConfig(kafkaConf);final Producer<Integer, String> producer = new Producer<Integer, String>(producerConfig);new Thread(new Runnable() {public void run() {while(true) {//在线处理广告点击流的基本数据格式：timestamp、ip、userID、adID、province、cityLong timestamp = new Date().getTime();String ip = ips[random.nextInt(12)]; //可以采用网络上免费提供的ip库int userID = random.nextInt(10000);int adID = random.nextInt(100);String province = provinces[random.nextInt(4)];String city = cities.get(province)[random.nextInt(3)];String clickedAd = timestamp + "\t" + ip + "\t" + userID + "\t" + adID + "\t" + province + "\t" + city;producer.send(new KeyedMessage<Integer, String>("AdClicked", clickedAd));try {Thread.sleep(50);} catch (InterruptedException e) {// TODO Auto-generated catch blocke.printStackTrace();} }} }).start();} } package com.tom.spark.SparkApps.sparkstreaming;import java.sql.Connection;import java.sql.DriverManager;import java.sql.PreparedStatement;import java.sql.ResultSet;import java.sql.SQLException;import java.util.ArrayList;import java.util.Arrays;import java.util.HashMap;import java.util.HashSet;import java.util.Iterator;import java.util.List;import java.util.Map;import java.util.Set;import java.util.concurrent.LinkedBlockingQueue;import kafka.serializer.StringDecoder;import org.apache.spark.SparkConf;import org.apache.spark.api.java.JavaPairRDD;import org.apache.spark.api.java.JavaRDD;import org.apache.spark.api.java.JavaSparkContext;import org.apache.spark.api.java.function.Function;import org.apache.spark.api.java.function.Function2;import org.apache.spark.api.java.function.PairFunction;import org.apache.spark.api.java.function.VoidFunction;import org.apache.spark.sql.DataFrame;import org.apache.spark.sql.Row;import org.apache.spark.sql.RowFactory;import org.apache.spark.sql.hive.HiveContext;import org.apache.spark.sql.types.DataTypes;import org.apache.spark.sql.types.StructType;import org.apache.spark.streaming.Durations;import org.apache.spark.streaming.api.java.JavaDStream;import org.apache.spark.streaming.api.java.JavaPairDStream;import org.apache.spark.streaming.api.java.JavaPairInputDStream;import org.apache.spark.streaming.api.java.JavaStreamingContext;import org.apache.spark.streaming.api.java.JavaStreamingContextFactory;import org.apache.spark.streaming.kafka.KafkaUtils;import com.google.common.base.Optional;import scala.Tuple2;/ 数据处理，Kafka消费者/public class AdClickedStreamingStats {/ @param args/public static void main(String[] args) {// TODO Auto-generated method stub//好处：1、checkpoint 2、工厂final SparkConf conf = new SparkConf().setAppName("SparkStreamingOnKafkaDirect").setMaster("hdfs://Master:7077/");final String checkpointDirectory = "hdfs://Master:9000/library/SparkStreaming/CheckPoint_Data";JavaStreamingContextFactory factory = new JavaStreamingContextFactory() {public JavaStreamingContext create() {// TODO Auto-generated method stubreturn createContext(checkpointDirectory, conf);} };/ 可以从失败中恢复Driver，不过还需要指定Driver这个进程运行在Cluster，并且在提交应用程序的时候制定--supervise;/JavaStreamingContext javassc = JavaStreamingContext.getOrCreate(checkpointDirectory, factory);/ 第三步：创建Spark Streaming输入数据来源input Stream: 1、数据输入来源可以基于File、HDFS、Flume、Kafka、Socket等 2、在这里我们指定数据来源于网络Socket端口，Spark Streaming连接上该端口并在运行的时候一直监听该端口的数据 (当然该端口服务首先必须存在），并且在后续会根据业务需要不断有数据产生（当然对于Spark Streaming 应用程序的运行而言，有无数据其处理流程都是一样的） 3、如果经常在每间隔5秒钟没有数据的话不断启动空的Job其实会造成调度资源的浪费，因为并没有数据需要发生计算；所以 实际的企业级生成环境的代码在具体提交Job前会判断是否有数据，如果没有的话就不再提交Job；///创建Kafka元数据来让Spark Streaming这个Kafka Consumer利用Map<String, String> kafkaParameters = new HashMap<String, String>();kafkaParameters.put("metadata.broker.list", "Master:9092,Worker1:9092,Worker2:9092");Set<String> topics = new HashSet<String>();topics.add("SparkStreamingDirected");JavaPairInputDStream<String, String> adClickedStreaming = KafkaUtils.createDirectStream(javassc, String.class, String.class, StringDecoder.class, StringDecoder.class,kafkaParameters, topics);/因为要对黑名单进行过滤，而数据是在RDD中的，所以必然使用transform这个函数； 但是在这里我们必须使用transformToPair，原因是读取进来的Kafka的数据是Pair<String,String>类型, 另一个原因是过滤后的数据要进行进一步处理，所以必须是读进的Kafka数据的原始类型 在此再次说明，每个Batch Duration中实际上讲输入的数据就是被一个且仅被一个RDD封装的，你可以有多个 InputDStream，但其实在产生job的时候，这些不同的InputDStream在Batch Duration中就相当于Spark基于HDFS 数据操作的不同文件来源而已罢了。/JavaPairDStream<String, String> filteredadClickedStreaming = adClickedStreaming.transformToPair(new Function<JavaPairRDD<String,String>, JavaPairRDD<String,String>>() {public JavaPairRDD<String, String> call(JavaPairRDD<String, String> rdd) throws Exception {/ 在线黑名单过滤思路步骤： 1、从数据库中获取黑名单转换成RDD，即新的RDD实例封装黑名单数据； 2、然后把代表黑名单的RDD的实例和Batch Duration产生的RDD进行Join操作， 准确的说是进行leftOuterJoin操作，也就是说使用Batch Duration产生的RDD和代表黑名单的RDD实例进行 leftOuterJoin操作，如果两者都有内容的话，就会是true，否则的话就是false 我们要留下的是leftOuterJoin结果为false； /final List<String> blackListNames = new ArrayList<String>();JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();jdbcWrapper.doQuery("SELECT FROM blacklisttable", null, new ExecuteCallBack() {public void resultCallBack(ResultSet result) throws Exception {while(result.next()){blackListNames.add(result.getString(1));} }});List<Tuple2<String, Boolean>> blackListTuple = new ArrayList<Tuple2<String,Boolean>>();for(String name : blackListNames) {blackListTuple.add(new Tuple2<String, Boolean>(name, true));}List<Tuple2<String, Boolean>> blacklistFromListDB = blackListTuple; //数据来自于查询的黑名单表并且映射成为<String, Boolean>JavaSparkContext jsc = new JavaSparkContext(rdd.context());/ 黑名单的表中只有userID，但是如果要进行join操作的话就必须是Key-Value，所以在这里我们需要 基于数据表中的数据产生Key-Value类型的数据集合/JavaPairRDD<String, Boolean> blackListRDD = jsc.parallelizePairs(blacklistFromListDB);/ 进行操作的时候肯定是基于userID进行join，所以必须把传入的rdd进行mapToPair操作转化成为符合格式的RDD/JavaPairRDD<String, Tuple2<String, String>> rdd2Pair = rdd.mapToPair(new PairFunction<Tuple2<String,String>, String, Tuple2<String, String>>() {public Tuple2<String, Tuple2<String, String>> call(Tuple2<String, String> t) throws Exception {// TODO Auto-generated method stubString userID = t._2.split("\t")[2];return new Tuple2<String, Tuple2<String,String>>(userID, t);} });JavaPairRDD<String, Tuple2<Tuple2<String, String>, Optional<Boolean>>> joined = rdd2Pair.leftOuterJoin(blackListRDD);JavaPairRDD<String, String> result = joined.filter(new Function<Tuple2<String,Tuple2<Tuple2<String,String>,Optional<Boolean>>>, Boolean>() {public Boolean call(Tuple2<String, Tuple2<Tuple2<String, String>, Optional<Boolean>>> tuple)throws Exception {// TODO Auto-generated method stubOptional<Boolean> optional = tuple._2._2;if(optional.isPresent() && optional.get()){return false;} else {return true;} }}).mapToPair(new PairFunction<Tuple2<String,Tuple2<Tuple2<String,String>,Optional<Boolean>>>, String, String>() {public Tuple2<String, String> call(Tuple2<String, Tuple2<Tuple2<String, String>, Optional<Boolean>>> t)throws Exception {// TODO Auto-generated method stubreturn t._2._1;} });return result;} });//广告点击的基本数据格式：timestamp、ip、userID、adID、province、cityJavaPairDStream<String, Long> pairs = filteredadClickedStreaming.mapToPair(new PairFunction<Tuple2<String,String>, String, Long>() {public Tuple2<String, Long> call(Tuple2<String, String> t) throws Exception {String[] splited=t._2.split("\t");String timestamp = splited[0]; //YYYY-MM-DDString ip = splited[1];String userID = splited[2];String adID = splited[3];String province = splited[4];String city = splited[5]; String clickedRecord = timestamp + "_" +ip + "_"+userID+"_"+adID+"_"+province +"_"+city;return new Tuple2<String, Long>(clickedRecord, 1L);} });/ 第4.3步：在单词实例计数为1基础上，统计每个单词在文件中出现的总次数/JavaPairDStream<String, Long> adClickedUsers= pairs.reduceByKey(new Function2<Long, Long, Long>() {public Long call(Long i1, Long i2) throws Exception{return i1 + i2;} });/判断有效的点击，复杂化的采用机器学习训练模型进行在线过滤 简单的根据ip判断1天不超过100次；也可以通过一个batch duration的点击次数判断是否非法广告点击，通过一个batch来判断是不完整的，还需要一天的数据也可以每一个小时来判断。/JavaPairDStream<String, Long> filterClickedBatch = adClickedUsers.filter(new Function<Tuple2<String,Long>, Boolean>() {public Boolean call(Tuple2<String, Long> v1) throws Exception {if (1 < v1._2){//更新一些黑名单的数据库表return false;} else { return true;} }});//filterClickedBatch.print();//写入数据库filterClickedBatch.foreachRDD(new Function<JavaPairRDD<String,Long>, Void>() {public Void call(JavaPairRDD<String, Long> rdd) throws Exception {rdd.foreachPartition(new VoidFunction<Iterator<Tuple2<String,Long>>>() {public void call(Iterator<Tuple2<String, Long>> partition) throws Exception {//使用数据库连接池的高效读写数据库的方式将数据写入数据库mysql//例如一次插入 1000条 records，使用insertBatch 或 updateBatch//插入的用户数据信息：userID,adID,clickedCount,time//这里面有一个问题，可能出现两条记录的key是一样的，此时需要更新累加操作List<UserAdClicked> userAdClickedList = new ArrayList<UserAdClicked>();while(partition.hasNext()) {Tuple2<String, Long> record = partition.next();String[] splited = record._1.split("\t");UserAdClicked userClicked = new UserAdClicked();userClicked.setTimestamp(splited[0]);userClicked.setIp(splited[1]);userClicked.setUserID(splited[2]);userClicked.setAdID(splited[3]);userClicked.setProvince(splited[4]);userClicked.setCity(splited[5]);userAdClickedList.add(userClicked);}final List<UserAdClicked> inserting = new ArrayList<UserAdClicked>();final List<UserAdClicked> updating = new ArrayList<UserAdClicked>();JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();//表的字段timestamp、ip、userID、adID、province、city、clickedCountfor(final UserAdClicked clicked : userAdClickedList) {jdbcWrapper.doQuery("SELECT clickedCount FROM adclicked WHERE"+ " timestamp =? AND userID = ? AND adID = ?",new Object[]{clicked.getTimestamp(), clicked.getUserID(),clicked.getAdID()}, new ExecuteCallBack() {public void resultCallBack(ResultSet result) throws Exception {// TODO Auto-generated method stubif(result.next()) {long count = result.getLong(1);clicked.setClickedCount(count);updating.add(clicked);} else {inserting.add(clicked);clicked.setClickedCount(1L);} }});}//表的字段timestamp、ip、userID、adID、province、city、clickedCountList<Object[]> insertParametersList = new ArrayList<Object[]>();for(UserAdClicked insertRecord : inserting) {insertParametersList.add(new Object[] {insertRecord.getTimestamp(),insertRecord.getIp(),insertRecord.getUserID(),insertRecord.getAdID(),insertRecord.getProvince(),insertRecord.getCity(),insertRecord.getClickedCount()});}jdbcWrapper.doBatch("INSERT INTO adclicked VALUES(?, ?, ?, ?, ?, ?, ?)", insertParametersList);//表的字段timestamp、ip、userID、adID、province、city、clickedCountList<Object[]> updateParametersList = new ArrayList<Object[]>();for(UserAdClicked updateRecord : updating) {updateParametersList.add(new Object[] {updateRecord.getTimestamp(),updateRecord.getIp(),updateRecord.getUserID(),updateRecord.getAdID(),updateRecord.getProvince(),updateRecord.getCity(),updateRecord.getClickedCount() + 1});}jdbcWrapper.doBatch("UPDATE adclicked SET clickedCount = ? WHERE"+ " timestamp =? AND ip = ? AND userID = ? AND adID = ? "+ "AND province = ? AND city = ?", updateParametersList);} });return null;} });//再次过滤，从数据库中读取数据过滤黑名单JavaPairDStream<String, Long> blackListBasedOnHistory = filterClickedBatch.filter(new Function<Tuple2<String,Long>, Boolean>() {public Boolean call(Tuple2<String, Long> v1) throws Exception {//广告点击的基本数据格式：timestamp,ip,userID,adID,province,cityString[] splited = v1._1.split("\t"); //提取key值String date =splited[0];String userID =splited[2];String adID =splited[3];//查询一下数据库同一个用户同一个广告id点击量超过50次列入黑名单//接下来 根据date、userID、adID条件去查询用户点击广告的数据表，获得总的点击次数//这个时候基于点击次数判断是否属于黑名单点击int clickedCountTotalToday = 81 ;if (clickedCountTotalToday > 50) {return true;}else {return false ;} }});//map操作，找出用户的idJavaDStream<String> blackListuserIDBasedInBatchOnhistroy =blackListBasedOnHistory.map(new Function<Tuple2<String,Long>, String>() {public String call(Tuple2<String, Long> v1) throws Exception {// TODO Auto-generated method stubreturn v1._1.split("\t")[2];} });//有一个问题，数据可能重复，在一个partition里面重复，这个好办；//但多个partition不能保证一个用户重复，需要对黑名单的整个rdd进行去重操作。//rdd去重了，partition也就去重了，一石二鸟，一箭双雕// 找出了黑名单，下一步就写入黑名单数据库表中JavaDStream<String> blackListUniqueuserBasedInBatchOnhistroy = blackListuserIDBasedInBatchOnhistroy.transform(new Function<JavaRDD<String>, JavaRDD<String>>() {public JavaRDD<String> call(JavaRDD<String> rdd) throws Exception {// TODO Auto-generated method stubreturn rdd.distinct();} });// 下一步写入到数据表中blackListUniqueuserBasedInBatchOnhistroy.foreachRDD(new Function<JavaRDD<String>, Void>() {public Void call(JavaRDD<String> rdd) throws Exception {rdd.foreachPartition(new VoidFunction<Iterator<String>>() {public void call(Iterator<String> t) throws Exception {// TODO Auto-generated method stub//插入的用户信息可以只包含：useID//此时直接插入黑名单数据表即可。//写入数据库List<Object[]> blackList = new ArrayList<Object[]>();while(t.hasNext()) {blackList.add(new Object[]{t.next()});}JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();jdbcWrapper.doBatch("INSERT INTO blacklisttable values (?)", blackList);} });return null;} });/广告点击累计动态更新,每个updateStateByKey都会在Batch Duration的时间间隔的基础上进行广告点击次数的更新， 更新之后我们一般都会持久化到外部存储设备上，在这里我们存储到MySQL数据库中/JavaPairDStream<String, Long> updateStateByKeyDSteam = filteredadClickedStreaming.mapToPair(new PairFunction<Tuple2<String,String>, String, Long>() {public Tuple2<String, Long> call(Tuple2<String, String> t)throws Exception {String[] splited=t._2.split("\t");String timestamp = splited[0]; //YYYY-MM-DDString ip = splited[1];String userID = splited[2];String adID = splited[3];String province = splited[4];String city = splited[5]; String clickedRecord = timestamp + "_" +ip + "_"+userID+"_"+adID+"_"+province +"_"+city;return new Tuple2<String, Long>(clickedRecord, 1L);} }).updateStateByKey(new Function2<List<Long>, Optional<Long>, Optional<Long>>() {public Optional<Long> call(List<Long> v1, Optional<Long> v2)throws Exception {// v1:当前的Key在当前的Batch Duration中出现的次数的集合，例如{1，1，1，。。。，1}// v2:当前的Key在以前的Batch Duration中积累下来的结果；Long clickedTotalHistory = 0L; if(v2.isPresent()){clickedTotalHistory = v2.get();}for(Long one : v1) {clickedTotalHistory += one;}return Optional.of(clickedTotalHistory);} });updateStateByKeyDSteam.foreachRDD(new Function<JavaPairRDD<String,Long>, Void>() {public Void call(JavaPairRDD<String, Long> rdd) throws Exception {rdd.foreachPartition(new VoidFunction<Iterator<Tuple2<String,Long>>>() {public void call(Iterator<Tuple2<String, Long>> partition) throws Exception {//使用数据库连接池的高效读写数据库的方式将数据写入数据库mysql//例如一次插入 1000条 records，使用insertBatch 或 updateBatch//插入的用户数据信息：timestamp、adID、province、city//这里面有一个问题，可能出现两条记录的key是一样的，此时需要更新累加操作List<AdClicked> AdClickedList = new ArrayList<AdClicked>();while(partition.hasNext()) {Tuple2<String, Long> record = partition.next();String[] splited = record._1.split("\t");AdClicked adClicked = new AdClicked();adClicked.setTimestamp(splited[0]);adClicked.setAdID(splited[1]);adClicked.setProvince(splited[2]);adClicked.setCity(splited[3]);adClicked.setClickedCount(record._2);AdClickedList.add(adClicked);}final List<AdClicked> inserting = new ArrayList<AdClicked>();final List<AdClicked> updating = new ArrayList<AdClicked>();JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();//表的字段timestamp、ip、userID、adID、province、city、clickedCountfor(final AdClicked clicked : AdClickedList) {jdbcWrapper.doQuery("SELECT clickedCount FROM adclickedcount WHERE"+ " timestamp = ? AND adID = ? AND province = ? AND city = ?",new Object[]{clicked.getTimestamp(), clicked.getAdID(),clicked.getProvince(), clicked.getCity()}, new ExecuteCallBack() {public void resultCallBack(ResultSet result) throws Exception {// TODO Auto-generated method stubif(result.next()) {long count = result.getLong(1);clicked.setClickedCount(count);updating.add(clicked);} else {inserting.add(clicked);clicked.setClickedCount(1L);} }});}//表的字段timestamp、ip、userID、adID、province、city、clickedCountList<Object[]> insertParametersList = new ArrayList<Object[]>();for(AdClicked insertRecord : inserting) {insertParametersList.add(new Object[] {insertRecord.getTimestamp(),insertRecord.getAdID(),insertRecord.getProvince(),insertRecord.getCity(),insertRecord.getClickedCount()});}jdbcWrapper.doBatch("INSERT INTO adclickedcount VALUES(?, ?, ?, ?, ?)", insertParametersList);//表的字段timestamp、ip、userID、adID、province、city、clickedCountList<Object[]> updateParametersList = new ArrayList<Object[]>();for(AdClicked updateRecord : updating) {updateParametersList.add(new Object[] {updateRecord.getClickedCount(),updateRecord.getTimestamp(),updateRecord.getAdID(),updateRecord.getProvince(),updateRecord.getCity()});}jdbcWrapper.doBatch("UPDATE adclickedcount SET clickedCount = ? WHERE"+ " timestamp =? AND adID = ? AND province = ? AND city = ?", updateParametersList);} });return null;} });/ 对广告点击进行TopN计算，计算出每天每个省份Top5排名的广告 因为我们直接对RDD进行操作，所以使用了transfomr算子；/updateStateByKeyDSteam.transform(new Function<JavaPairRDD<String,Long>, JavaRDD<Row>>() {public JavaRDD<Row> call(JavaPairRDD<String, Long> rdd) throws Exception {JavaRDD<Row> rowRDD = rdd.mapToPair(new PairFunction<Tuple2<String,Long>, String, Long>() {public Tuple2<String, Long> call(Tuple2<String, Long> t)throws Exception {// TODO Auto-generated method stubString[] splited=t._1.split("_");String timestamp = splited[0]; //YYYY-MM-DDString adID = splited[3];String province = splited[4];String clickedRecord = timestamp + "_" + adID + "_" + province;return new Tuple2<String, Long>(clickedRecord, t._2);} }).reduceByKey(new Function2<Long, Long, Long>() {public Long call(Long v1, Long v2) throws Exception {// TODO Auto-generated method stubreturn v1 + v2;} }).map(new Function<Tuple2<String,Long>, Row>() {public Row call(Tuple2<String, Long> v1) throws Exception {// TODO Auto-generated method stubString[] splited=v1._1.split("_");String timestamp = splited[0]; //YYYY-MM-DDString adID = splited[3];String province = splited[4];return RowFactory.create(timestamp, adID, province, v1._2);} });StructType structType = DataTypes.createStructType(Arrays.asList(DataTypes.createStructField("timestamp", DataTypes.StringType, true),DataTypes.createStructField("adID", DataTypes.StringType, true),DataTypes.createStructField("province", DataTypes.StringType, true),DataTypes.createStructField("clickedCount", DataTypes.LongType, true)));HiveContext hiveContext = new HiveContext(rdd.context());DataFrame df = hiveContext.createDataFrame(rowRDD, structType);df.registerTempTable("topNTableSource");DataFrame result = hiveContext.sql("SELECT timestamp, adID, province, clickedCount, FROM"+ " (SELECT timestamp, adID, province,clickedCount, "+ "ROW_NUMBER() OVER(PARTITION BY province ORDER BY clickeCount DESC) rank "+ "FROM topNTableSource) subquery "+ "WHERE rank <= 5");return result.toJavaRDD();} }).foreachRDD(new Function<JavaRDD<Row>, Void>() {public Void call(JavaRDD<Row> rdd) throws Exception {// TODO Auto-generated method stubrdd.foreachPartition(new VoidFunction<Iterator<Row>>() {public void call(Iterator<Row> t) throws Exception {// TODO Auto-generated method stubList<AdProvinceTopN> adProvinceTopN = new ArrayList<AdProvinceTopN>();while(t.hasNext()) {Row row = t.next();AdProvinceTopN item = new AdProvinceTopN();item.setTimestamp(row.getString(0));item.setAdID(row.getString(1));item.setProvince(row.getString(2));item.setClickedCount(row.getLong(3));adProvinceTopN.add(item);}// final List<AdProvinceTopN> inserting = new ArrayList<AdProvinceTopN>();// final List<AdProvinceTopN> updating = new ArrayList<AdProvinceTopN>();JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();Set<String> set = new HashSet<String>();for(AdProvinceTopN item: adProvinceTopN){set.add(item.getTimestamp() + "_" + item.getProvince());}//表的字段timestamp、adID、province、clickedCountArrayList<Object[]> deleteParametersList = new ArrayList<Object[]>();for(String deleteRecord : set) {String[] splited = deleteRecord.split("_");deleteParametersList.add(new Object[]{splited[0],splited[1]});}jdbcWrapper.doBatch("DELETE FROM adprovincetopn WHERE timestamp = ? AND province = ?", deleteParametersList);//表的字段timestamp、ip、userID、adID、province、city、clickedCountList<Object[]> insertParametersList = new ArrayList<Object[]>();for(AdProvinceTopN insertRecord : adProvinceTopN) {insertParametersList.add(new Object[] {insertRecord.getClickedCount(),insertRecord.getTimestamp(),insertRecord.getAdID(),insertRecord.getProvince()});}jdbcWrapper.doBatch("INSERT INTO adprovincetopn VALUES (?, ?, ?, ?)", insertParametersList);} });return null;} });/ 计算过去半个小时内广告点击的趋势 广告点击的基本数据格式：timestamp、ip、userID、adID、province、city/filteredadClickedStreaming.mapToPair(new PairFunction<Tuple2<String,String>, String, Long>() {public Tuple2<String, Long> call(Tuple2<String, String> t)throws Exception {String splited[] = t._2.split("\t");String adID = splited[3];String time = splited[0]; //Todo:后续需要重构代码实现时间戳和分钟的转换提取。此处需要提取出该广告的点击分钟单位return new Tuple2<String, Long>(time + "_" + adID, 1L);} }).reduceByKeyAndWindow(new Function2<Long, Long, Long>() {public Long call(Long v1, Long v2) throws Exception {// TODO Auto-generated method stubreturn v1 + v2;} }, new Function2<Long, Long, Long>() {public Long call(Long v1, Long v2) throws Exception {// TODO Auto-generated method stubreturn v1 - v2;} }, Durations.minutes(30), Durations.milliseconds(5)).foreachRDD(new Function<JavaPairRDD<String,Long>, Void>() {public Void call(JavaPairRDD<String, Long> rdd) throws Exception {// TODO Auto-generated method stubrdd.foreachPartition(new VoidFunction<Iterator<Tuple2<String,Long>>>() {public void call(Iterator<Tuple2<String, Long>> partition)throws Exception {List<AdTrendStat> adTrend = new ArrayList<AdTrendStat>();// TODO Auto-generated method stubwhile(partition.hasNext()) {Tuple2<String, Long> record = partition.next();String[] splited = record._1.split("_");String time = splited[0];String adID = splited[1];Long clickedCount = record._2;/ 在插入数据到数据库的时候具体需要哪些字段？time、adID、clickedCount; 而我们通过J2EE技术进行趋势绘图的时候肯定是需要年、月、日、时、分这个维度的，所以我们在这里需要 年月日、小时、分钟这些时间维度；/AdTrendStat adTrendStat = new AdTrendStat();adTrendStat.setAdID(adID);adTrendStat.setClickedCount(clickedCount);adTrendStat.set_date(time); //Todo:获取年月日adTrendStat.set_hour(time); //Todo:获取小时adTrendStat.set_minute(time);//Todo:获取分钟adTrend.add(adTrendStat);}final List<AdTrendStat> inserting = new ArrayList<AdTrendStat>();final List<AdTrendStat> updating = new ArrayList<AdTrendStat>();JDBCWrapper jdbcWrapper = JDBCWrapper.getJDBCInstance();//表的字段timestamp、ip、userID、adID、province、city、clickedCountfor(final AdTrendStat trend : adTrend) {final AdTrendCountHistory adTrendhistory = new AdTrendCountHistory();jdbcWrapper.doQuery("SELECT clickedCount FROM adclickedtrend WHERE"+ " date =? AND hour = ? AND minute = ? AND AdID = ?",new Object[]{trend.get_date(), trend.get_hour(), trend.get_minute(),trend.getAdID()}, new ExecuteCallBack() {public void resultCallBack(ResultSet result) throws Exception {// TODO Auto-generated method stubif(result.next()) {long count = result.getLong(1);adTrendhistory.setClickedCountHistoryLong(count);updating.add(trend);} else { inserting.add(trend);} }});}//表的字段date、hour、minute、adID、clickedCountList<Object[]> insertParametersList = new ArrayList<Object[]>();for(AdTrendStat insertRecord : inserting) {insertParametersList.add(new Object[] {insertRecord.get_date(),insertRecord.get_hour(),insertRecord.get_minute(),insertRecord.getAdID(),insertRecord.getClickedCount()});}jdbcWrapper.doBatch("INSERT INTO adclickedtrend VALUES(?, ?, ?, ?, ?)", insertParametersList);//表的字段date、hour、minute、adID、clickedCountList<Object[]> updateParametersList = new ArrayList<Object[]>();for(AdTrendStat updateRecord : updating) {updateParametersList.add(new Object[] {updateRecord.getClickedCount(),updateRecord.get_date(),updateRecord.get_hour(),updateRecord.get_minute(),updateRecord.getAdID()});}jdbcWrapper.doBatch("UPDATE adclickedtrend SET clickedCount = ? WHERE"+ " date =? AND hour = ? AND minute = ? AND AdID = ?", updateParametersList);} });return null;} });;/ Spark Streaming 执行引擎也就是Driver开始运行，Driver启动的时候是位于一条新的线程中的，当然其内部有消息循环体，用于 接收应用程序本身或者Executor中的消息，/javassc.start();javassc.awaitTermination();javassc.close();}private static JavaStreamingContext createContext(String checkpointDirectory, SparkConf conf) {// If you do not see this printed, that means the StreamingContext has been loaded// from the new checkpointSystem.out.println("Creating new context");// Create the context with a 5 second batch sizeJavaStreamingContext ssc = new JavaStreamingContext(conf, Durations.seconds(10));ssc.checkpoint(checkpointDirectory);return ssc;} }class JDBCWrapper {private static JDBCWrapper jdbcInstance = null;private static LinkedBlockingQueue<Connection> dbConnectionPool = new LinkedBlockingQueue<Connection>();static {try {Class.forName("com.mysql.jdbc.Driver");} catch (ClassNotFoundException e) {// TODO Auto-generated catch blocke.printStackTrace();} }public static JDBCWrapper getJDBCInstance() {if(jdbcInstance == null) {synchronized (JDBCWrapper.class) {if(jdbcInstance == null) {jdbcInstance = new JDBCWrapper();} }}return jdbcInstance; }private JDBCWrapper() {for(int i = 0; i < 10; i++){try {Connection conn = DriverManager.getConnection("jdbc:mysql://Master:3306/sparkstreaming","root", "root");dbConnectionPool.put(conn);} catch (Exception e) {// TODO Auto-generated catch blocke.printStackTrace();} } }public synchronized Connection getConnection() {while(0 == dbConnectionPool.size()){try {Thread.sleep(20);} catch (InterruptedException e) {// TODO Auto-generated catch blocke.printStackTrace();} }return dbConnectionPool.poll();}public int[] doBatch(String sqlText, List<Object[]> paramsList){Connection conn = getConnection();PreparedStatement preparedStatement = null;int[] result = null;try {conn.setAutoCommit(false);preparedStatement = conn.prepareStatement(sqlText);for(Object[] parameters: paramsList) {for(int i = 0; i < parameters.length; i++){preparedStatement.setObject(i + 1, parameters[i]);} preparedStatement.addBatch();}result = preparedStatement.executeBatch();conn.commit();} catch (SQLException e) {// TODO Auto-generated catch blocke.printStackTrace();} finally {if(preparedStatement != null) {try {preparedStatement.close();} catch (SQLException e) {// TODO Auto-generated catch blocke.printStackTrace();} }if(conn != null) {try {dbConnectionPool.put(conn);} catch (InterruptedException e) {// TODO Auto-generated catch blocke.printStackTrace();} }}return result; }public void doQuery(String sqlText, Object[] paramsList, ExecuteCallBack callback){Connection conn = getConnection();PreparedStatement preparedStatement = null;ResultSet result = null;try {preparedStatement = conn.prepareStatement(sqlText);for(int i = 0; i < paramsList.length; i++){preparedStatement.setObject(i + 1, paramsList[i]);} result = preparedStatement.executeQuery();try {callback.resultCallBack(result);} catch (Exception e) {// TODO Auto-generated catch blocke.printStackTrace();} } catch (SQLException e) {// TODO Auto-generated catch blocke.printStackTrace();} finally {if(preparedStatement != null) {try {preparedStatement.close();} catch (SQLException e) {// TODO Auto-generated catch blocke.printStackTrace();} }if(conn != null) {try {dbConnectionPool.put(conn);} catch (InterruptedException e) {// TODO Auto-generated catch blocke.printStackTrace();} }} }}interface ExecuteCallBack {void resultCallBack(ResultSet result) throws Exception;}class UserAdClicked {private String timestamp;private String ip;private String userID;private String adID;private String province;private String city;private Long clickedCount;public String getTimestamp() {return timestamp;}public void setTimestamp(String timestamp) {this.timestamp = timestamp;}public String getIp() {return ip;}public void setIp(String ip) {this.ip = ip;}public String getUserID() {return userID;}public void setUserID(String userID) {this.userID = userID;}public String getAdID() {return adID;}public void setAdID(String adID) {this.adID = adID;}public String getProvince() {return province;}public void setProvince(String province) {this.province = province;}public String getCity() {return city;}public void setCity(String city) {this.city = city;}public Long getClickedCount() {return clickedCount;}public void setClickedCount(Long clickedCount) {this.clickedCount = clickedCount;} }class AdClicked {private String timestamp;private String adID;private String province;private String city;private Long clickedCount;public String getTimestamp() {return timestamp;}public void setTimestamp(String timestamp) {this.timestamp = timestamp;}public String getAdID() {return adID;}public void setAdID(String adID) {this.adID = adID;}public String getProvince() {return province;}public void setProvince(String province) {this.province = province;}public String getCity() {return city;}public void setCity(String city) {this.city = city;}public Long getClickedCount() {return clickedCount;}public void setClickedCount(Long clickedCount) {this.clickedCount = clickedCount;} }class AdProvinceTopN {private String timestamp;private String adID;private String province;private Long clickedCount;public String getTimestamp() {return timestamp;}public void setTimestamp(String timestamp) {this.timestamp = timestamp;}public String getAdID() {return adID;}public void setAdID(String adID) {this.adID = adID;}public String getProvince() {return province;}public void setProvince(String province) {this.province = province;}public Long getClickedCount() {return clickedCount;}public void setClickedCount(Long clickedCount) {this.clickedCount = clickedCount;} }class AdTrendStat {private String _date;private String _hour;private String _minute;private String adID;private Long clickedCount;public String get_date() {return _date;}public void set_date(String _date) {this._date = _date;}public String get_hour() {return _hour;}public void set_hour(String _hour) {this._hour = _hour;}public String get_minute() {return _minute;}public void set_minute(String _minute) {this._minute = _minute;}public String getAdID() {return adID;}public void setAdID(String adID) {this.adID = adID;}public Long getClickedCount() {return clickedCount;}public void setClickedCount(Long clickedCount) {this.clickedCount = clickedCount;} }class AdTrendCountHistory{private Long clickedCountHistoryLong;public Long getClickedCountHistoryLong() {return clickedCountHistoryLong;}public void setClickedCountHistoryLong(Long clickedCountHistoryLong) {this.clickedCountHistoryLong = clickedCountHistoryLong;} } 本篇文章为转载内容。原文链接：https://blog.csdn.net/tom_8899_li/article/details/71194434。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...执行，常用于负载均衡应用 ff(FAST FAILOVER)：快速故障修复，用于检测解决接口等故障 indirect：间接执行，类似于一个函数方法，被另一个group来调用 1.查看当前设备对group的支持 ovs-ofctl -O OpenFlow13 dump-group-features br0 2.查看group表 ovs-ofctl -O OpenFlow13 dump-groups br0 3.创建group表 类型为all ovs-ofctl -O OpenFlow13 add-group br0 group_id=1,type=all,bucket=output:1,bucket=output:2,bucket=output:3 类型为select ovs-ofctl -O OpenFlow13 add-group br0 group_id=2,type=select,bucket=output:1,bucket=output:2,bucket=output:3 类型为select，指定hash方法(5元组，OpenFlow1.5+) ovs-ofctl -O OpenFlow15 add-group br0 group_id=3,type=select,selection_method=hash,fields=ip_src,bucket=output:2,bucket=output:3 4.删除group表 ovs-ofctl -O OpenFlow13 del-groups br0 group_id=2 5.创建流表 ovs-ofctl -O OpenFlow13 add-flow br0 in_port=1,actions=group:2 goto table配置 数据流先从table0开始匹配，如actions有goto_table，再进行后续table的匹配，实现多级流水线，如需使用goto table，则创建流表时，指定table id，范围为0-255，不指定则默认为table0 1.在table0中添加一条流表条目 ovs-ofctl add-flow br0 table=0,in_port=1,actions=goto_table=1 2.在table1中添加一条流表条目 ovs-ofctl add-flow br0 table=1,ip,nw_dst=10.10.0.0/16,actions=output:2 tunnel配置 如需配置tunnel，必需确保当前系统对各tunnel的remote ip网络可达 gre 1.创建一个gre接口，并且指定端口id=1001 ovs-vsctl add-port br0 gre1 -- set Interface gre1 type=gre options:remote_ip=1.1.1.1 ofport_request=1001 2.可选选项 将tos或者ttl在隧道上继承，并将tunnel id设置成123 ovs-vsctl set Interface gre1 options:tos=inherit options:ttl=inherit options:key=123 3.创建关于gre流表 封装gre转发 ovs-ofctl add-flow br0 ip,in_port=1,nw_dst=10.10.0.0/16,actions=output:1001 解封gre转发 ovs-ofctl add-flow br0 in_port=1001,actions=output:1 vxlan 1.创建一个vxlan接口，并且指定端口id=2001 ovs-vsctl add-port br0 vxlan1 -- set Interface vxlan1 type=vxlan options:remote_ip=1.1.1.1 ofport_request=2001 2.可选选项 将tos或者ttl在隧道上继承，将vni设置成123，UDP目的端为设置成8472(默认为4789) ovs-vsctl set Interface vxlan1 options:tos=inherit options:ttl=inherit options:key=123 options:dst_port=8472 3.创建关于vxlan流表 封装vxlan转发 ovs-ofctl add-flow br0 ip,in_port=1,nw_dst=10.10.0.0/16,actions=output:2001 解封vxlan转发 ovs-ofctl add-flow br0 in_port=2001,actions=output:1 sflow配置 1.对网桥br0进行sflow监控 agent: 与collector通信所在的网口名，通常为管理口 target: collector监听的IP地址和端口，端口默认为6343 header: sFlow在采样时截取报文头的长度 polling: 采样时间间隔，单位为秒 ovs-vsctl -- --id=@sflow create sflow agent=eth0 target=\"10.0.0.1:6343\" header=128 sampling=64 polling=10 -- set bridge br0 sflow=@sflow 2.查看创建的sflow ovs-vsctl list sflow 3.删除对应的网桥sflow配置，参数为sFlow UUID ovs-vsctl remove bridge br0 sflow 7b9b962e-fe09-407c-b224-5d37d9c1f2b3 4.删除网桥下所有sflow配置 ovs-vsctl -- clear bridge br0 sflow 1 QoS配置 ingress policing 1.配置ingress policing，对接口eth0入流限速10Mbps ovs-vsctl set interface eth0 ingress_policing_rate=10000 ovs-vsctl set interface eth0 ingress_policing_burst=8000 2.清除相应接口的ingress policer配置 ovs-vsctl set interface eth0 ingress_policing_rate=0 ovs-vsctl set interface eth0 ingress_policing_burst=0 3.查看接口ingress policer配置 ovs-vsctl list interface eth0 4.查看网桥支持的Qos类型 ovs-appctl qos/show-types br0 端口镜像配置 1.配置eth0收到/发送的数据包镜像到eth1 ovs-vsctl -- set bridge br0 mirrors=@m \ -- --id=@eth0 get port eth0 \ -- --id=@eth1 get port eth1 \ -- --id=@m create mirror name=mymirror select-dst-port=@eth0 select-src-port=@eth0 output-port=@eth1 2.删除端口镜像配置 ovs-vsctl -- --id=@m get mirror mymirror -- remove bridge br0 mirrors @m 3.清除网桥下所有端口镜像配置 ovs-vsctl clear bridge br0 mirrors 4.查看端口镜像配置 ovs-vsctl get bridge br0 mirrors Open vSwitch中有多个命令，分别有不同的作用，大致如下： ovs-vsctl用于控制ovs db ovs-ofctl用于管理OpenFlow switch 的 flow ovs-dpctl用于管理ovs的datapath ovs-appctl用于查询和管理ovs daemon 转载于:https://www.cnblogs.com/liuhongru/p/10336849.html 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_30876945/article/details/99916308。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...景。联合信息集团移动应用开发部总经理熊军认为,开发人员必须“对自己能力的认识有一个准确的职业定位。认识自己,才能准确地职业定位,有了准确的职业定位,才能有短期、中期和长期的发展方向和动力。” 8848公司cto张研表示反对“学而优则士”、“不想当将军的士兵就不是好士兵”此类说法。同样,csdn网站、《程序员》杂志社总经理蒋涛也不建议所有程序员都向管理道路发展,因为相比之下,项目经理和cto必定具有一些独特的素质,比如沟通能力、项目管理能力,组织能力、计划能力以及产品和技术的眼光等,这些素质并不是每一个人都具备的。 公司对对碰 一级指标:外资、合资、民营大型it公司 二级指标:合资、中小软件公司 三级指标:国企、事业单位 采访中,有位叫王岩的资深开发人员一再强调,如果可能,一定要进外企。本次调查中,微软亚洲研究院,ibm研究院等外企几乎成了大部分开发人员所向往的圣地。 外企是我第一选择 被采访者:李文山 个人背景:技术支持 上海交大毕业的李文山,在校时就已经参与了很多社团活动,因此也见识了不少各种企业人员的做事风格与思想状态。外企大公司前沿的技术科研、严谨负责的处事态度都给他留下了深刻的印象。当然,丰富的培训、优厚的待遇、放心的福利也是必须考虑的因素。用他的话说,“身边全是一级的牛人,自己的发展自然就有了保障”。 中小软件企业机会多 被采访者:刘洋 个人背景:项目经理+程序员 天天加班加点,见到刘洋时他一脸的菜色,但心情不错。毕业不到一年,他就凭技术能力与管理能力当上了项目经理。虽然下面员工流动率高,但刘洋的薪水却是老板亲自钦点,比起毕业的同班同学绰绰有余。从项目最初的客户谈判、到中间执行,再到最后的交工,刘洋什么都做过,因此也锻炼得几乎成了全能手。对于未来,他希望公司业务做大后,能再规范一些,当然,随着公司的成长,自己上升的空间也很大。 三企走遍 被采访者:阿蒙(vchome.net) 个人背景:6年,通信行业,珠海 我很幸运,毕业时就进了美资软件公司,从事系统软件的开发工作,主要应用c/c++、x86汇编、mips汇编、ddk、sdk等技术,年薪四万多。在这家外企工作两年后,技术与处事能力大有提高,但开始心生厌倦,总觉得外面的世界很精彩。后来有一家从事通信软件产品开发的公司,答应年薪翻倍,一年后可走上管理层,怦然心动后就去新公司报到了。一年后,如愿以偿地走上管理层,两年后,技术管理能力以及行业业务能力有了质的飞跃,也越来越发现这个行业有前途,于是与朋友开始策划开公司,资金融到后就轰轰烈烈地创业了。没日没干了一年,由于资金与市场的原因,公司over,只好灰溜溜地去一家香港合资公司继续打工,仍做管理层。 我的感觉是,外企有一整套规章制度,薪金制度也较为完善,工作考评有客观的数值:月工作计划与总结、季度工作考核、上司的总体评价等,这些考核都很详细,细到完成的代码量、文档数、提过什么建议等等。国内企业也有计划与考核,但更多的是主观态度,而对工作的效果与过程并不具体细化,人际关系、表达能力等往往起着很微妙的关键作用。当然国内企业也有很多优点,比如制度灵活。 专家点评:人才的争夺,一方面是卯足了劲准备抢占有利地势和环境的个人开发者,另一方面,企业间的人才争夺战越演越烈。在此情况下,为了吸引国内的高素质人才,不少外企纷纷在中国开设研究院,走“曲线救国”道路。根据一份猎头资料,摩托罗拉研发中心、松下电器中国研究开发公司、ibm中国研究中心、朗讯公司贝尔实验室、微软中国研究院都是猎取高级科研、管理人才的大头。外企与外企、外企与国企、国企与民企,这个三角关系,虽然在早几年优劣非常明显,但现在,这种差距正在明显缩小。具体适合哪个企业,围城内外其实也并不是三重天(见下页表23)。 热点行业易淘金 一级推荐:移动开发、游戏开发 二级推荐:安全领域、企业信息化 三级推荐:通用软件、系统平台、项目开发等 专家点评:出现这种趋势主要是由市场对软件人才的供求决定的,因为目前在移动和游戏领域开发人员确实比较少,所以相对而言,他们的薪资较高,这就是所谓的“奇货可居”。但是,目前市场在成长,这些新兴或热点领域的开发人员数量也在逐渐增加,当达到一个平衡点时,他们的工资也会随之下降,这主要由市场对人才的供求关系决定。不建议开发人员轻易放弃自己原有的开发领域花大量时间和精力投向自己不熟悉的领域。 所以,熊军认为:这两个行业方向的长线发展看好,也需要更多的开发人员,但是年轻人都要根据自己的兴趣爱好、思维模式、技术能力选择更适合自己的行业方向,而且也有很多更有潜力的方向,建议年轻人从长远考虑。 地域火拼 一级指标:北京、上海 二级指标:深圳、杭州、广州 三级指标:成都、武汉、大连等 绝大多数的软件从业人员集中在北京、上海、广州和深圳四大城市,其中尤以北京的人数最为集中,但在另一项相关的调查中,上海却是程序员最向往的城市。在本次收入调查中,北京、上海的工资较高。武汉稍低于成都。 地域不同,薪资有别 被采访者:青润 个人背景:5年,电信行业、软件企业服务 我本人在北京、上海、深圳、成都四地都曾工作过。我基本上这样认为,对于刚刚大学毕业的软件人员,工资情况是这样:成都1500-2000元/月,上海2000元/月,深圳2000-2500元/月,北京2000-2500元/月。工作几年后,以成都系数为1来计,上海和其他地方为1.3-1.5倍于成都的收入。差异主要也是因为生活成本造成的。 相比而言,北京具有王者气氛,有着俯瞰全国的实力和影响力。上海是经济驱动的城市。深圳对人的友好度最好,它的优点是有各种各样的新技术公司,缺点是缺乏大公司的支撑。好山好水的成都,虽起步了很多软件公司,但大都在出川后倒下了,或者只是长居四川,足少出户,感觉比较舒适和懒散。 安逸的成都竞争的北京 被采访者:夏桅 个人背景:。net开发人员 夏桅毕业之后就来到北京从事软件开发工作。但他时常怀念起成都的生活,那里的山,那里的水,还有怡然自得的成都人都给他留下了深刻的印象。 但夏桅还是不后悔。一方面,安逸的环境对自己发展不利,适度的竞争可以发掘自身的潜力。而且,眼界开阔了,薪水也高不少。当然,在北京的生活绝对说不上舒服,但机会多,可有多种选择,极大地改观了自己的现状。 一眼可以看到头的武汉,但我喜欢 被采访者:刘如宁 个人背景:大学教师、项目主管 在武汉工作了10多年,刘如宁感觉还是比较惬意。比收入,武汉可能还不如成都,更别提北京和上海,但武汉的生活成本比较低,几块钱就够一天的伙食了。在高校担当大学教师的刘如宁,科研任务不重,而且还有足够的时间去外面承接项目,用自己喜欢的软件开发技术赚取外快。“我不是一个特别喜欢接受挑战的人,这种做自己喜欢的事情、宁静而富裕的生活,我还是比较满足”,有房、有车,生活安定富足的刘如宁如是说。 专家点评:比“营利”,必须是一个闭环。有收入比较,还得有支出比较,两者对比后才是最终收获。在地域这个问题上,大城市,确实收入比较高,但相对的,生活成本也较高。 趋势全球研发及资讯执行副总裁梁国屏表示,趋势的薪资结构体系在全世界都是一样的,具体数值要根据各地的市场来调整。比如一个经理,他的等级可能是10,那么不论在中国、日本还是美国,他的等级都是10.但这个等级的薪水具体是多少,就要看当地的市场了,趋势会和当地的薪资调查单位合作,来确定系数,然后计算出具体的薪水。 除薪水外,地域的附加价值会更重要一些。第一,对于技术发展比较迅速的it业,在大城市,整体的环境和氛围相对会好一些,例如在北京和上海等地,几乎每天都会有技术论坛、开发者大会、大厂商的开发日、各领域大师的巡回讲座等。其次,作的机会也会比较多,因为集中了各种类型的公司和企业,总会找到适合你条件的合适职位和选择。第三,可以参与比较大的技术团体,形成独特的生活与社交圈。用8848公司cto张研的话来说,“如果周围都是高手,你不是高手也难”,所以地域对人影响最大的是提供了一个环境,其次才是机会和薪水。 对此,telelogic公司北方区总经理任群力建议说,“如果开发人员能够善于利用互联网,并有决心多学习,这种地域差异会得到弱化。” 我拿青春赌明天 在本次专题组织中,大部分被采访人都明确表示,自己会在软件业领域一直奋斗下去,因为从中得到了很多的快乐与激情。但明天是否一定会更好,这需要从两个角度去考虑:一是从个人角度讲,年轻的软件人一定要有个人职业的规划,而且这种规划要从自己特点或专长出发,与当前业界相适应。另外,更重要的是,个人发展到什么程度,还需要同整个软件大环境和社会环境挂钩。 个人职业要规划 现在广州做了4年delphi/c行业开发、年薪10万的王旋说,“工作后所得到的收获就是,学习和工作要有相对明确的目标,不能因为一时心动而去学习某一技术。在真正下决定之前,我通常会考虑更多因素,包括长期的发展、个人路线的规划、需要付出的代价、可能遇到的困难以及解决的办法等等,在决定后还会制定更加明确的计划,包括短期、中期和长期的,身边可以利用到的资源,以及每一个阶段是怎么过渡到更高阶段的计划。” 现在,越来越多的在职人员意识到,未来的职业细分市场中,只有在某一领域确实比较深入、具有专长和资源的人会得到企业的重视,浪里淘沙勇者胜。 中国软件业面临困境 中国的软件业发展目前面临两难境地。上至国家,下至各城市都给予了相当的政策优惠,但整体软件业的发展却一直雷声大,雨点小。对此,北航软件学院院长孙伟忧心忡忡,“很多人从心里看不起印度,但印度的软件业却有数家2万、3万员工规模的大企业,放眼中国,规模最大的东软集团、用友公司,真正的软件开发者也不过两、三千人,这种差别太巨大了,我们一定要好好思考,中国的软件业究竟出了什么问题?” 对此,很多专家认为,中国软件业已经面临一个新的转折点,随着信息化在各行各业的深入运用,软件业有机会深度专业化,由边缘而进入核心,从而形成以深度专业化为特征的核心竞争力。无论个人还是公司,我们都有幸在第一时间站在了软件业这块前沿阵地,但明天是否会更好,还有待于中国软件业的整体发展,在这颇为沉闷的时刻,我们期望“让暴风雨来得更猛烈些吧”! 参考资料:http://www.w-training.com/viewc.asp?id=23922 ====================================================== 在最后，我邀请大家参加新浪APP，就是新浪免费送大家的一个空间，支持PHP+MySql，免费二级域名，免费域名绑定 这个是我邀请的地址，您通过这个链接注册即为我的好友，并获赠云豆500个，价值5元哦！短网址是http://t.cn/SXOiLh我创建的小站每天访客已经达到2000+了，每天挂广告赚50+元哦，呵呵，饭钱不愁了，\(^o^)/ 本篇文章为转载内容。原文链接：https://blog.csdn.net/javazhuanzai/article/details/7189396。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

... 一、概述： B/S应用系统的报表打印一直以来都是一个难题，以前常规的思路是通过在浏览器中安装ActiveX插件以获得直接驱动打印机的能力。 但是，随着浏览器的发展，越来越多的浏览器厂商禁止安装ActiveX，以避免因ActiveX组件导致的各种安全问题。 为解决B/S打印中的痛点，我工作室开发了本报表服务器，完美地解决了在浏览器端不用ActiveX而获得与C/S系统一样的打印能力。 本报表系统不需要在浏览器安装任何插件，只需通过JavaScript即可实现报表精确打印以及打印过程免人工介入。 ------------- 二、特点： 1、高兼容：不需要在浏览器端和服务端安装任何插件，在浏览器插件被各大浏览器纷纷禁用的今天，无插件设计兼容绝大多数浏览器； 2、免安装：软件即拷即用，不安装，不污染操作系统，让操作系统历久弥新； 3、可视化：可视化的模板设计器，通过拖拽即可完成模板设计； 4、高精度：实现精确到毫米的打印精度，对于一些格式复杂，要求精确打印的场合，可以很容易达到毫米级精度； 5、易套打：可视化的模板设计器，在模板中加入一个票据格式的底图，可以很方便地实现套打，对于实现发票、快递面单、支票等打印毫无压力； 6、功能强：从简单报表、主从报表到嵌套报表甚至交叉报表，均能轻松应对。还有一维二维条形码，甚至，还有逆天的脚本功能，只有想不到，没有做不到； 7、自动化: 打印过程中全部自动化，无需象生成PDF、Word、Excel那样还需要人工再点打印； 8、易部署：打印模板既可以部署在客户端（与 cfprint.exe 程序放在同一目录下），也支持部署在服务端随报表数据一起传到客户端； 9、目标活：支持在数据文件中或模板中指定要输出的打印机，发票用针打、报表用激光打、小票用小票机，专机专打； 三、使用前提条件： 1、IE6以上版本、Chrome(谷歌浏览器)4.0以上版本、Firefox 4.0以上版本、Opera 11以上版本、Safari 5.0.2以上版本、iOS 4.2以上版本 或使用Chrome内核、Firefox内核的浏览器均可直接使用本打印系统； 2、在进行打印前，需要先设计好打印模板（模板设计器请见第五节）； 3、打印数据必须Json的格式发送给打印服务器，并且数据必须满足指定的格式（见下文）； 四、数据格式说明： 下面以一个跨境电商快递面单数据为例解释一下数据各项的含义; { "template": "waybill.fr3", /打印模板文件名。除了指定模板文件以外，还支持把模板嵌入到数据文件中，以实现在服务器端灵活使用打印模板，格式如下：/ /"template": "base64:QTBBRTNEQTE3MkFFQjIzNEFERD<后面省略>" / "ver": 4, /数据模板文件版本/ "Copies": 3, /打印份数，支持指定打印份数/ "Duplex": 1, /是否双面打印，0：默认，不双面，1：垂直，2：水平，3：单面打印(simplex)/ "Printer": "priPrinter", /指定打印机，本系统支持在数据文件中指定打印机，也支持在打印模板中指定打印机/ "PageNumbers": "", /要打印的页码范围，同打印机的打印设置里的格式相同，例如："1,2,3"表示打印前3页， “2-5”:表示打印第2到5页，“1,2,4-8”表示打印第1、2、4到8页/ "Preview": 1, /是否预览，跟主界面上选择“预览”效果相同，取值为0：不预览，1：预览/ "Tables":[ /数据表数组/ { "Name": "Table1", /表名/ "Cols": [ /字段定义/ { "type": "str", /字段类型，可选值：String,Str,Integer,Int,Smallint,Float,Long, Blob，/ /对于图片、PDF等使用Blob类型，并把值进行Base64编码，并加前缀：/ / "base64/pdf:" 字段值是PDF; "base64/jpg:" 字段值是jpg; "base64/png:" 字段值是png; "base64/gif:" 字段值是gif; / "size": 255, /字段长度/ "name": "HAWB", /字段名称，必须与打印模板中的打印项名称相同/ "required": false /字段是否必填/ }, { "type": "int", "size": 0, "name": "NO", "required": false }, { "type": "float", "size": 0, "name": "报关公司面单号", "required": false }, { "type": "integer", "size": 0, "name": "公司内部单号", "required": false }, { "type": "str", "size": 255, "name": "发件人", "required": false }, { "type": "str", "size": 255, "name": "发件人地址", "required": false }, { "type": "str", "size": 255, "name": "发件人电话", "required": false }, { "type": "str", "size": 255, "name": "发货国家", "required": false }, { "type": "str", "size": 255, "name": "收件人", "required": false }, { "type": "str", "size": 255, "name": "收件人地址", "required": false }, { "type": "str", "size": 255, "name": "收件人电话", "required": false }, { "type": "str", "size": 255, "name": "收货人证件号码", "required": false }, { "type": "str", "size": 255, "name": "收货省份", "required": false }, { "type": "float", "size": 0, "name": "总计费重量", "required": false }, { "type": "int", "size": 0, "name": "总件数", "required": false }, { "type": "float", "size": 0, "name": "申报总价（CNY）", "required": false }, { "type": "float", "size": 0, "name": "申报总价（JPY）", "required": false }, { "type": "int", "size": 0, "name": "件数1", "required": false }, { "type": "str", "size": 255, "name": "品名1", "required": false }, { "type": "float", "size": 0, "name": "单价1（JPY）", "required": false }, { "type": "str", "size": 255, "name": "单位1", "required": false }, { "type": "float", "size": 0, "name": "申报总价1（CNY）", "required": false }, { "type": "float", "size": 0, "name": "申报总价1（JPY）", "required": false }, { "type": "int", "size": 0, "name": "件数2", "required": false }, { "type": "str", "size": 255, "name": "品名2", "required": false }, { "type": "float", "size": 0, "name": "单价2（JPY）", "required": false }, { "type": "str", "size": 255, "name": "单位2", "required": false }, { "type": "float", "size": 0, "name": "申报总价2（CNY）", "required": false }, { "type": "float", "size": 0, "name": "申报总价2（JPY）", "required": false }, { "type": "AutoInc", "size": 0, "name": "ID", "required": false }, { "type": "blob", "size": 0, "name": "附件", "required": false } ], "Data": [ /数据行定义，每一行含义见上面的字段定义/ { "HAWB": "860014010055", "NO": 1, "报关公司面单号": 200303900791, "公司内部单号": 730293, "发件人": "NAKAGAWA SUMIRE 2", "发件人地址": " 991-199-113,Kameido,Koto-ku,Tokyo", "发件人电话": "03-3999-3999", "发货国家": "日本", "收件人": "张三丰", "收件人地址": "上海市闵行区虹梅南路1660弄蔷薇八村99号9999室", "收件人电话": "182-1234-8888", "收货人证件号码": null, "收货省份": null, "总计费重量": 3.2, "总件数": 13, "申报总价（CNY）": null, "申报总价（JPY）": null, "件数1": 10, "品名1": "纸尿片", "单价1（JPY）": null, "单位1": null, "申报总价1（CNY）": null, "申报总价1（JPY）": null, "件数2": null, "品名2": null, "单价2（JPY）": null, "单位2": null, "申报总价2（CNY）": null, "申报总价2（JPY）": null, "ID": 1, "附件": "base64/pdf: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", }, { "HAWB": "860014010035", "NO": 2, "报关公司面单号": 200303900789, "公司内部单号": 730291, "发件人": "NAKAGAWA SUMIRE", "发件人地址": " 991-199-113,Kameido,Koto-ku,Tokyo", "发件人电话": "03-3999-3999", "发货国家": "日本", "收件人": "张无忌", "收件人地址": "上海市闵行区虹梅南路1660弄蔷薇八村88号8888室", "收件人电话": "182-1234-8888", "收货人证件号码": null, "收货省份": null, "总计费重量": 3.2, "总件数": 13, "申报总价（CNY）": null, "申报总价（JPY）": null, "件数1": 10, "品名1": "纸尿片", "单价1（JPY）": null, "单位1": null, "申报总价1（CNY）": null, "申报总价1（JPY）": null, "件数2": null, "品名2": null, "单价2（JPY）": null, "单位2": null, "申报总价2（CNY）": null, "申报总价2（JPY）": null, "ID": 2, "附件":"base64/gif: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" } ] }, { "Name": "Table2", "Cols": [ { "type": "int", "size": 0, "name": "NO", "required": false }, { "type": "float", "size": 0, "name": "订单编号", "required": false }, { "type": "integer", "size": 0, "name": "下单日期", "required": false }, { "type": "str", "size": 255, "name": "下单平台", "required": false } ], "Data": [ { "NO": 1, "订单编号": 200303900791, "下单日期": "2017-01-20", "下单平台": "天猫" }, { "NO": 2, "订单编号": 200303900792, "下单日期": "2017-01-20", "下单平台": "京东" } ] } ] } 五、调用示例： <!-- ★★★ 模式1 ★★★ --> <!DOCTYPE html> <head> <meta charset="utf-8" /> <title>康虎云报表系统测试</title> </head> <body> <div style="width: 100%;text-align:center;"> <h2>康虎云报表系统</h2> <h3>打印测试（模式1）</h3> <div> <input type="button" id="btnPrint" value="打印" onClick="doSend(_reportData);" /> </div> </div> <div id="output"></div> </body> <script type="text/javascript"> //定义数据脚本 var _reportData = '{"template":"waybill.fr3","Cols":[{"type":"str","size":255,"name":"HAWB","required":false},<这里省略1000字> ]}'; //在浏览器控制台输出调试信息 console.log("reportData = " + _reportData); </script> <script language="javascript" type="text/javascript" src="cfprint.min.js"></script> <script language="javascript" type="text/javascript" src="cfprint_ext.js"></script> <script language="javascript" type="text/javascript"> /下面四个参数必须放在myreport.js脚本后面，以覆盖myreport.js中的默认值/ var _delay_send = 1000; //发送打印服务器前延时时长，-1则表示不自动打印 var _delay_close = 1000; //打印完成后关闭窗口的延时时长, -1则表示不关闭 var cfprint_addr = "127.0.0.1"; //打印服务器监听地址 var cfprint_port = 54321; //打印服务器监听端口 </script> </html> <!-- ★★★ 模式2 ★★★ --> <?php //如果有php运行环境，只需把该文件扩展名改成 .php，然后上传到web目录即可在真实服务器上测试 header("Access-Control-Allow-Origin: "); ?> <!DOCTYPE html> <head> <meta charset="utf-8" /> <title>康虎云报表系统测试</title> <style type="text/css"> output {font-size: 12px; background-color:F0FFF0;} </style> </head> <body> <div style="width: 100%;text-align:center;"> <h2>康虎云报表系统（Ver 1.3.0）</h2> <h3>打印测试（模式2）</h3> <div style="line-height: 1.5;"> <div style="width: 70%; text-align: left;"> <b>一、首先按下列步骤设置：</b><br/> 1、运行打印服务器；<br/> 2、按“停止”按钮停止服务；<br/> 3、打开“设置”区；<br/> 4、在“常用参数-->服务模式”中，选择“模式2”；<br/> 5、按“启动”按钮启动服务。 </div> <div style="width: 70%; text-align: left;"> <b>二、按本页的“打印”按钮开始打印。</b><br/> </div><br/> <input type="button" id="btnPrint" value="打印" /><br/><br/> <div style="width: 70%; text-align: left; font-size: 12px;"> 由于JavaScript在不同域名下访问会出现由来已久的跨域问题，所以正式部署到服务器使用时，要解决跨域问题。<br/> 对于IE8以上版本浏览器，只需增加一个reponse头：Access-Control-Allow-Origin即可，而对于php、jsp、asp/aspx等动态语言而言，增加一个response头是非常简单的事，例如：<br/> <b>在php：</b><br/><span style="color: red;"> <?php <br/> header("Access-Control-Allow-Origin: ");<br/> ?><br/> </span> <b>在jsp：</b><br/><span style="color: red;"> <% <br/> response.setHeader("Access-Control-Allow-Origin", ""); <br/> %><br/> </span> <b>在asp.net中：</b><br/><span style="color: red;"> Response.AppendHeader("Access-Control-Allow-Origin", ""); </span>，<br/>其他语言里，大家请自行搜索“ajax跨域”。而对于IE8以下的浏览器，大家可以自行搜索“IE6+Ajax+跨域”寻找解决办法吧，也可以联系我们帮助。 </div> </div> </div> <div id="output"></div> </body> <!-- 引入模式2所需的javascript支持库 --> <script type="text/javascript" src="cfprint_mode2.min.js" charset="UTF-8"></script> <!-- 构造报表数据 --> <script type="text/javascript"> var _reportData = '{"template":"waybill.fr3","ver":3, "Tables":[ {"Name":"Table1", "Cols":[{"type":"str","size":255,"name":"HAWB","required":false},{"type":"int","size":0,"name":"NO","required":false},{"type":"float","size":0,"name":"报关公司面单号","required":false},{"type":"integer","size":0,"name":"公司内部单号","required":false},{"type":"str","size":255,"name":"发件人","required":false},{"type":"str","size":255,"name":"发件人地址","required":false},{"type":"str","size":255,"name":"发件人电话","required":false},{"type":"str","size":255,"name":"发货国家","required":false},{"type":"str","size":255,"name":"收件人","required":false},{"type":"str","size":255,"name":"收件人地址","required":false},{"type":"str","size":255,"name":"收件人电话","required":false},{"type":"str","size":255,"name":"收货人证件号码","required":false},{"type":"str","size":255,"name":"收货省份","required":false},{"type":"float","size":0,"name":"总计费重量","required":false},{"type":"int","size":0,"name":"总件数","required":false},{"type":"float","size":0,"name":"申报总价（CNY）","required":false},{"type":"float","size":0,"name":"申报总价（JPY）","required":false},{"type":"int","size":0,"name":"件数1","required":false},{"type":"str","size":255,"name":"品名1","required":false},{"type":"float","size":0,"name":"单价1（JPY）","required":false},{"type":"str","size":255,"name":"单位1","required":false},{"type":"float","size":0,"name":"申报总价1（CNY）","required":false},{"type":"float","size":0,"name":"申报总价1（JPY）","required":false},{"type":"int","size":0,"name":"件数2","required":false},{"type":"str","size":255,"name":"品名2","required":false},{"type":"float","size":0,"name":"单价2（JPY）","required":false},{"type":"str","size":255,"name":"单位2","required":false},{"type":"float","size":0,"name":"申报总价2（CNY）","required":false},{"type":"float","size":0,"name":"申报总价2（JPY）","required":false},{"type":"int","size":0,"name":"件数3","required":false},{"type":"str","size":255,"name":"品名3","required":false},{"type":"float","size":0,"name":"单价3（JPY）","required":false},{"type":"str","size":255,"name":"单位3","required":false},{"type":"float","size":0,"name":"申报总价3（CNY）","required":false},{"type":"float","size":0,"name":"申报总价3（JPY）","required":false},{"type":"int","size":0,"name":"件数4","required":false},{"type":"str","size":255,"name":"品名4","required":false},{"type":"float","size":0,"name":"单价4（JPY）","required":false},{"type":"str","size":255,"name":"单位4","required":false},{"type":"float","size":0,"name":"申报总价4（CNY）","required":false},{"type":"float","size":0,"name":"申报总价4（JPY）","required":false},{"type":"int","size":0,"name":"件数5","required":false},{"type":"str","size":255,"name":"品名5","required":false},{"type":"float","size":0,"name":"单价5（JPY）","required":false},{"type":"str","size":255,"name":"单位5","required":false},{"type":"float","size":0,"name":"申报总价5（CNY）","required":false},{"type":"float","size":0,"name":"申报总价5（JPY）","required":false},{"type":"str","size":255,"name":"参考号","required":false},{"type":"AutoInc","size":0,"name":"ID","required":false}],"Data":[{"公司内部单号":730293,"发货国家":"日本","单价1（JPY）":null,"申报总价2（JPY）":null,"单价4（JPY）":null,"申报总价2（CNY）":null,"申报总价5（JPY）":null,"报关公司面单号":200303900791,"申报总价5（CNY）":null,"收货人证件号码":null,"申报总价1（JPY）":null,"单价3（JPY）":null,"申报总价1（CNY）":null,"申报总价4（JPY）":null,"申报总价4（CNY）":null,"收件人电话":"182-1758-9999","收件人地址":"上海市闵行区虹梅南路1660弄蔷薇八村139号502室","HAWB":"860014010055","发件人电话":"03-3684-9999","发件人地址":" 1-1-13,Kameido,Koto-ku,Tokyo","NO":3,"ID":3,"单价2（JPY）":null,"申报总价3（JPY）":null,"单价5（JPY）":null,"申报总价3（CNY）":null,"收货省份":null,"申报总价（JPY）":null,"申报总价（CNY）":null,"总计费重量":3.20,"收件人":"张三丰2","总件数":13,"品名5":null,"品名4":null,"品名3":null,"品名2":null,"品名1":"纸尿片","参考号":null,"发件人":"NAKAGAWA SUMIRE 2","单位5":null,"单位4":null,"单位3":null,"单位2":null,"单位1":null,"件数5":null,"件数4":null,"件数3":3,"件数2":null,"件数1":10},{"公司内部单号":730291,"发货国家":"日本","单价1（JPY）":null,"申报总价2（JPY）":null,"单价4（JPY）":null,"申报总价2（CNY）":null,"申报总价5（JPY）":null,"报关公司面单号":200303900789,"申报总价5（CNY）":null,"收货人证件号码":null,"申报总价1（JPY）":null,"单价3（JPY）":null,"申报总价1（CNY）":null,"申报总价4（JPY）":null,"申报总价4（CNY）":null,"收件人电话":"182-1758-9999","收件人地址":"上海市闵行区虹梅南路1660弄蔷薇八村139号502室","HAWB":"860014010035","发件人电话":"03-3684-9999","发件人地址":" 1-1-13,Kameido,Koto-ku,Tokyo","NO":1,"ID":1,"单价2（JPY）":null,"申报总价3（JPY）":null,"单价5（JPY）":null,"申报总价3（CNY）":null,"收货省份":null,"申报总价（JPY）":null,"申报总价（CNY）":null,"总计费重量":3.20,"收件人":"张三丰","总件数":13,"品名5":null,"品名4":null,"品名3":null,"品名2":null,"品名1":"纸尿片","参考号":null,"发件人":"NAKAGAWA SUMIRE","单位5":null,"单位4":null,"单位3":null,"单位2":null,"单位1":null,"件数5":null,"件数4":null,"件数3":3,"件数2":null,"件数1":10},{"公司内部单号":730292,"发货国家":"日本","单价1（JPY）":null,"申报总价2（JPY）":null,"单价4（JPY）":null,"申报总价2（CNY）":null,"申报总价5（JPY）":null,"报关公司面单号":200303900790,"申报总价5（CNY）":null,"收货人证件号码":null,"申报总价1（JPY）":null,"单价3（JPY）":null,"申报总价1（CNY）":null,"申报总价4（JPY）":null,"申报总价4（CNY）":null,"收件人电话":"182-1758-9999","收件人地址":"上海市闵行区虹梅南路1660弄蔷薇八村139号502室","HAWB":"860014010045","发件人电话":"03-3684-9999","发件人地址":" 1-1-13,Kameido,Koto-ku,Tokyo","NO":2,"ID":2,"单价2（JPY）":null,"申报总价3（JPY）":null,"单价5（JPY）":null,"申报总价3（CNY）":null,"收货省份":null,"申报总价（JPY）":null,"申报总价（CNY）":null,"总计费重量":3.20,"收件人":"张无忌","总件数":13,"品名5":null,"品名4":null,"品名3":null,"品名2":null,"品名1":"纸尿片","参考号":null,"发件人":"NAKAGAWA SUMIRE 1","单位5":null,"单位4":null,"单位3":null,"单位2":null,"单位1":null,"件数5":null,"件数4":null,"件数3":3,"件数2":null,"件数1":10}]}]}'; if(window.console) console.log("reportData = " + _reportData); </script> <!-- 设置服务器参数 --> <script language="javascript" type="text/javascript"> var cfprint_addr = "127.0.0.1"; //打印服务器监听地址 var cfprint_port = 54321; //打印服务器监听端口 var _url = "http://"+cfprint_addr+":"+cfprint_port; </script> <!-- 编写回调函数用以处理服务器返回的数据 --> <script type="text/javascript"> / 参数： readyState: XMLHttpRequest的状态 httpStatus: 服务端返回的http状态 responseText: 服务端返回的内容 / var callbackSuccess = function(readyState, httpStatus, responseText){ if (httpStatus === 200) { //{"result": 1, "message": "打印完成"} var response = CFPrint.parseJSON(responseText); alert(response.message+", 状态码["+response.result+"]"); }else{ alert('打印失败，HTTP状态代码是：'+httpStatus); } } / 参数： message: 错误信息 / var callbackFailed = function(message){ alert('发送打印任务出错: ' + message); } </script> <!-- 调用发送打印请求功能 --> <script type="text/javascript"> (function(){ document.getElementById("btnPrint").onclick = function() { CFPrint.outputid = "output"; //指定调试信息输出div的id CFPrint.SendRequest(_url, _reportData, callbackSuccess, callbackFailed); //发送打印请求 }; })(); </script> </html> 六、模板设计器（重要！重要！！，好多朋友都找不到设计器入口） 在主界面上，双击右下角的“设计”两个字，即可打开模板设计工具箱，在工具箱有三个按钮和一个大文本框。三个按钮的作用分别是： 设计：以大文本框中的json数据为数据源，打开模板设计器窗口； 预览：以大文本框中的json数据为数据源，预览当前所用模板的打印效果； 打印：以大文本框中的json数据为数据源，向打印机输出当前所用模板生成的报表； 以后将会有详细的模板设计教程发布，如果您遇到紧急的难题，请向作者咨询。 本篇文章为转载内容。原文链接：https://blog.csdn.net/chensongmol/article/details/76087600。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...Identity实现应用程序的用户管理，以及实现应用程序的认证与授权等相关技术，译者希望本系列教程能成为掌握ASP.NET Identity技术的一份完整而有价值的资料。读者若是能够按照文章的描述，一边阅读、一边实践、一边理解，定能有意想不到的巨大收获！希望本系列博文能够得到广大园友的高度推荐。 15 Advanced ASP.NET Identity 15 ASP.NET Identity高级技术 In this chapter, I finish my description of ASP.NET Identity by showing you some of the advanced features it offers. I demonstrate how you can extend the database schema by defining custom properties on the user class and how to use database migrations to apply those properties without deleting the data in the ASP.NET Identity database. I also explain how ASP.NET Identity supports the concept of claims and demonstrates how they can be used to flexibly authorize access to action methods. I finish the chapter—and the book—by showing you how ASP.NET Identity makes it easy to authenticate users through third parties. I demonstrate authentication with Google accounts, but ASP.NET Identity has built-in support for Microsoft, Facebook, and Twitter accounts as well. Table 15-1 summarizes this chapter. 本章将完成对ASP.NET Identity的描述，向你展示它所提供的一些高级特性。我将演示，你可以扩展ASP.NET Identity的数据库架构，其办法是在用户类上定义一些自定义属性。也会演示如何使用数据库迁移，这样可以运用自定义属性，而不必删除ASP.NET Identity数据库中的数据。还会解释ASP.NET Identity如何支持声明（Claims）概念，并演示如何将它们灵活地用来对动作方法进行授权访问。最后向你展示ASP.NET Identity很容易通过第三方部件来认证用户，以此结束本章以及本书。将要演示的是使用Google账号认证，但ASP.NET Identity对于Microsoft、Facebook以及Twitter账号，都有内建的支持。表15-1是本章概要。 Table 15-1. Chapter Summary 表15-1. 本章概要 Problem 问题 Solution 解决方案 Listing 清单号 Store additional information about users. 存储用户的附加信息 Define custom user properties. 定义自定义用户属性 1–3, 8–11 Update the database schema without deleting user data. 更新数据库架构而不删除用户数据 Perform a database migration. 执行数据库迁移 4–7 Perform fine-grained authorization. 执行细粒度授权 Use claims. 使用声明（Claims） 12–14 Add claims about a user. 添加用户的声明（Claims） Use the ClaimsIdentity.AddClaims method. 使用ClaimsIdentity.AddClaims方法 15–19 Authorize access based on claim values. 基于声明（Claims）值授权访问 Create a custom authorization filter attribute. 创建一个自定义的授权过滤器注解属性 20–21 Authenticate through a third party. 通过第三方认证 Install the NuGet package for the authentication provider, redirect requests to that provider, and specify a callback URL that creates the user account. 安装认证提供器的NuGet包，将请求重定向到该提供器，并指定一个创建用户账号的回调URL。 22–25 15.1 Preparing the Example Project 15.1 准备示例项目 In this chapter, I am going to continue working on the Users project I created in Chapter 13 and enhanced in Chapter 14. No changes to the application are required, but start the application and make sure that there are users in the database. Figure 15-1 shows the state of my database, which contains the users Admin, Alice, Bob, and Joe from the previous chapter. To check the users, start the application and request the /Admin/Index URL and authenticate as the Admin user. 本章打算继续使用第13章创建并在第14章增强的Users项目。对应用程序无需做什么改变，但需要启动应用程序，并确保数据库中有一些用户。图15-1显示了数据库的状态，它含有上一章的用户Admin、Alice、Bob以及Joe。为了检查用户，请启动应用程序，请求/Admin/Index URL，并以Admin用户进行认证。 Figure 15-1. The initial users in the Identity database 图15-1. Identity数据库中的最初用户 I also need some roles for this chapter. I used the RoleAdmin controller to create roles called Users and Employees and assigned the users to those roles, as described in Table 15-2. 本章还需要一些角色。我用RoleAdmin控制器创建了角色Users和Employees，并为这些角色指定了一些用户，如表15-2所示。 Table 15-2. The Types of Web Forms Code Nuggets 表15-2. 角色及成员（作者将此表的标题写错了——译者注） Role 角色 Members 成员 Users Alice, Joe Employees Alice, Bob Figure 15-2 shows the required role configuration displayed by the RoleAdmin controller. 图15-2显示了由RoleAdmin控制器所显示出来的必要的角色配置。 Figure 15-2. Configuring the roles required for this chapter 图15-2. 配置本章所需的角色 15.2 Adding Custom User Properties 15.2 添加自定义用户属性 When I created the AppUser class to represent users in Chapter 13, I noted that the base class defined a basic set of properties to describe the user, such as e-mail address and telephone number. Most applications need to store more information about users, including persistent application preferences and details such as addresses—in short, any data that is useful to running the application and that should last between sessions. In ASP.NET Membership, this was handled through the user profile system, but ASP.NET Identity takes a different approach. 我在第13章创建AppUser类来表示用户时曾做过说明，基类定义了一组描述用户的基本属性，如E-mail地址、电话号码等。大多数应用程序还需要存储用户的更多信息，包括持久化应用程序爱好以及地址等细节——简言之，需要存储对运行应用程序有用并且在各次会话之间应当保持的任何数据。在ASP.NET Membership中，这是通过用户资料（User Profile）系统来处理的，但ASP.NET Identity采取了一种不同的办法。 Because the ASP.NET Identity system uses Entity Framework to store its data by default, defining additional user information is just a matter of adding properties to the user class and letting the Code First feature create the database schema required to store them. Table 15-3 puts custom user properties in context. 因为ASP.NET Identity默认是使用Entity Framework来存储其数据的，定义附加的用户信息只不过是给用户类添加属性的事情，然后让Code First特性去创建需要存储它们的数据库架构即可。表15-3描述了自定义用户属性的情形。 Table 15-3. Putting Cusotm User Properties in Context 表15-3. 自定义用户属性的情形 Question 问题 Answer 回答 What is it? 什么是自定义用户属性？ Custom user properties allow you to store additional information about your users, including their preferences and settings. 自定义用户属性让你能够存储附加的用户信息，包括他们的爱好和设置。 Why should I care? 为何要关心它？ A persistent store of settings means that the user doesn’t have to provide the same information each time they log in to the application. 设置的持久化存储意味着，用户不必每次登录到应用程序时都提供同样的信息。 How is it used by the MVC framework? 在MVC框架中如何使用它？ This feature isn’t used directly by the MVC framework, but it is available for use in action methods. 此特性不是由MVC框架直接使用的，但它在动作方法中使用是有效的。 15.2.1 Defining Custom Properties 15.2.1 定义自定义属性 Listing 15-1 shows how I added a simple property to the AppUser class to represent the city in which the user lives. 清单15-1演示了如何给AppUser类添加一个简单的属性，用以表示用户生活的城市。 Listing 15-1. Adding a Property in the AppUser.cs File 清单15-1. 在AppUser.cs文件中添加属性 using System;using Microsoft.AspNet.Identity.EntityFramework;namespace Users.Models { public enum Cities {LONDON, PARIS, CHICAGO}public class AppUser : IdentityUser {public Cities City { get; set; } }} I have defined an enumeration called Cities that defines values for some large cities and added a property called City to the AppUser class. To allow the user to view and edit their City property, I added actions to the Home controller, as shown in Listing 15-2. 这里定义了一个枚举，名称为Cities，它定义了一些大城市的值，另外给AppUser类添加了一个名称为City的属性。为了让用户能够查看和编辑City属性，给Home控制器添加了几个动作方法，如清单15-2所示。 Listing 15-2. Adding Support for Custom User Properties in the HomeController.cs File 清单15-2. 在HomeController.cs文件中添加对自定义属性的支持 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models;namespace Users.Controllers {public class HomeController : Controller {[Authorize]public ActionResult Index() {return View(GetData("Index"));}[Authorize(Roles = "Users")]public ActionResult OtherAction() {return View("Index", GetData("OtherAction"));}private Dictionary<string, object> GetData(string actionName) {Dictionary<string, object> dict= new Dictionary<string, object>();dict.Add("Action", actionName);dict.Add("User", HttpContext.User.Identity.Name);dict.Add("Authenticated", HttpContext.User.Identity.IsAuthenticated);dict.Add("Auth Type", HttpContext.User.Identity.AuthenticationType);dict.Add("In Users Role", HttpContext.User.IsInRole("Users"));return dict;} [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;await UserManager.UpdateAsync(user);return View(user);}private AppUser CurrentUser {get {return UserManager.FindByName(HttpContext.User.Identity.Name);} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } I added a CurrentUser property that uses the AppUserManager class to retrieve an AppUser instance to represent the current user. I pass the AppUser object as the view model object in the GET version of the UserProps action method, and the POST method uses it to update the value of the new City property. Listing 15-3 shows the UserProps.cshtml view, which displays the City property value and contains a form to change it. 我添加了一个CurrentUser属性，它使用AppUserManager类接收了表示当前用户的AppUser实例。在GET版本的UserProps动作方法中，传递了这个AppUser对象作为视图模型。而在POST版的方法中用它更新了City属性的值。清单15-3显示了UserProps.cshtml视图，它显示了City属性的值，并包含一个修改它的表单。 Listing 15-3. The Contents of the UserProps.cshtml File in the Views/Home Folder 清单15-3. Views/Home文件夹中UserProps.cshtml文件的内容 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";}<div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr></table></div> @using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Caution Don’t start the application when you have created the view. In the sections that follow, I demonstrate how to preserve the contents of the database, and if you start the application now, the ASP.NET Identity users will be deleted. 警告：创建了视图之后不要启动应用程序。在以下小节中，将演示如何保留数据库的内容，如果现在启动应用程序，将会删除ASP.NET Identity的用户。 15.2.2 Preparing for Database Migration 15.2.2 准备数据库迁移 The default behavior for the Entity Framework Code First feature is to drop the tables in the database and re-create them whenever classes that drive the schema have changed. You saw this in Chapter 14 when I added support for roles: When the application was started, the database was reset, and the user accounts were lost. Entity Framework Code First特性的默认行为是，一旦修改了派生数据库架构的类，便会删除数据库中的数据表，并重新创建它们。在第14章可以看到这种情况，在我添加角色支持时：当重启应用程序后，数据库被重置，用户账号也丢失。 Don’t start the application yet, but if you were to do so, you would see a similar effect. Deleting data during development is usually not a problem, but doing so in a production setting is usually disastrous because it deletes all of the real user accounts and causes a panic while the backups are restored. In this section, I am going to demonstrate how to use the database migration feature, which updates a Code First schema in a less brutal manner and preserves the existing data it contains. 不要启动应用程序，但如果你这么做了，会看到类似的效果。在开发期间删除数据没什么问题，但如果在产品设置中这么做了，通常是灾难性的，因为它会删除所有真实的用户账号，而备份恢复是很痛苦的事。在本小节中，我打算演示如何使用数据库迁移特性，它能以比较温和的方式更新Code First的架构，并保留架构中的已有数据。 The first step is to issue the following command in the Visual Studio Package Manager Console: 第一个步骤是在Visual Studio的“Package Manager Console（包管理器控制台）”中发布以下命令： Enable-Migrations –EnableAutomaticMigrations This enables the database migration support and creates a Migrations folder in the Solution Explorer that contains a Configuration.cs class file, the contents of which are shown in Listing 15-4. 它启用了数据库的迁移支持，并在“Solution Explorer（解决方案资源管理器）”创建一个Migrations文件夹，其中含有一个Configuration.cs类文件，内容如清单15-4所示。 Listing 15-4. The Contents of the Configuration.cs File 清单15-4. Configuration.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity;using System.Data.Entity.Migrations;using System.Linq;internal sealed class Configuration: DbMigrationsConfiguration<Users.Infrastructure.AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(Users.Infrastructure.AppIdentityDbContext context) {// This method will be called after migrating to the latest version.// 此方法将在迁移到最新版本时调用// You can use the DbSet<T>.AddOrUpdate() helper extension method// to avoid creating duplicate seed data. E.g.// 例如，你可以使用DbSet<T>.AddOrUpdate()辅助器方法来避免创建重复的种子数据//// context.People.AddOrUpdate(// p => p.FullName,// new Person { FullName = "Andrew Peters" },// new Person { FullName = "Brice Lambson" },// new Person { FullName = "Rowan Miller" }// );//} }} Tip You might be wondering why you are entering a database migration command into the console used to manage NuGet packages. The answer is that the Package Manager Console is really PowerShell, which is a general-purpose tool that is mislabeled by Visual Studio. You can use the console to issue a wide range of helpful commands. See http://go.microsoft.com/fwlink/?LinkID=108518 for details. 提示：你可能会觉得奇怪，为什么要在管理NuGet包的控制台中输入数据库迁移的命令？答案是“Package Manager Console（包管理控制台）”是真正的PowerShell，这是Visual studio冒用的一个通用工具。你可以使用此控制台发送大量的有用命令，详见http://go.microsoft.com/fwlink/?LinkID=108518。 The class will be used to migrate existing content in the database to the new schema, and the Seed method will be called to provide an opportunity to update the existing database records. In Listing 15-5, you can see how I have used the Seed method to set a default value for the new City property I added to the AppUser class. (I have also updated the class file to reflect my usual coding style.) 这个类将用于把数据库中的现有内容迁移到新的数据库架构，Seed方法的调用为更新现有数据库记录提供了机会。在清单15-5中可以看到，我如何用Seed方法为新的City属性设置默认值，City是添加到AppUser类中自定义属性。（为了体现我一贯的编码风格，我对这个类文件也进行了更新。） Listing 15-5. Managing Existing Content in the Configuration.cs File 清单15-5. 在Configuration.cs文件中管理已有内容 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models;namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);}foreach (AppUser dbUser in userMgr.Users) {dbUser.City = Cities.PARIS;}context.SaveChanges();} }} You will notice that much of the code that I added to the Seed method is taken from the IdentityDbInit class, which I used to seed the database with an administration user in Chapter 14. This is because the new Configuration class added to support database migrations will replace the seeding function of the IdentityDbInit class, which I’ll update shortly. Aside from ensuring that there is an admin user, the statements in the Seed method that are important are the ones that set the initial value for the City property I added to the AppUser class, as follows: 你可能会注意到，添加到Seed方法中的许多代码取自于IdentityDbInit类，在第14章中我用这个类将管理用户植入了数据库。这是因为这个新添加的、用以支持数据库迁移的Configuration类，将代替IdentityDbInit类的种植功能，我很快便会更新这个类。除了要确保有admin用户之外，在Seed方法中的重要语句是那些为AppUser类的City属性设置初值的语句，如下所示： ...foreach (AppUser dbUser in userMgr.Users) { dbUser.City = Cities.PARIS;}context.SaveChanges();... You don’t have to set a default value for new properties—I just wanted to demonstrate that the Seed method in the Configuration class can be used to update the existing user records in the database. 你不一定要为新属性设置默认值——这里只是想演示Configuration类中的Seed方法，可以用它更新数据库中的已有用户记录。 Caution Be careful when setting values for properties in the Seed method for real projects because the values will be applied every time you change the schema, overriding any values that the user has set since the last schema update was performed. I set the value of the City property just to demonstrate that it can be done. 警告：在用于真实项目的Seed方法中为属性设置值时要小心，因为你每一次修改架构时，都会运用这些值，这会将自执行上一次架构更新之后，用户设置的任何数据覆盖掉。这里设置City属性的值只是为了演示它能够这么做。 Changing the Database Context Class 修改数据库上下文类 The reason that I added the seeding code to the Configuration class is that I need to change the IdentityDbInit class. At present, the IdentityDbInit class is derived from the descriptively named DropCreateDatabaseIfModelChanges<AppIdentityDbContext> class, which, as you might imagine, drops the entire database when the Code First classes change. Listing 15-6 shows the changes I made to the IdentityDbInit class to prevent it from affecting the database. 在Configuration类中添加种植代码的原因是我需要修改IdentityDbInit类。此时，IdentityDbInit类派生于描述性命名的DropCreateDatabaseIfModelChanges<AppIdentityDbContext> 类，和你相像的一样，它会在Code First类改变时删除整个数据库。清单15-6显示了我对IdentityDbInit类所做的修改，以防止它影响数据库。 Listing 15-6. Preventing Database Schema Changes in the AppIdentityDbContext.cs File 清单15-6. 在AppIdentityDbContext.cs文件是阻止数据库架构变化 using System.Data.Entity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Models;using Microsoft.AspNet.Identity; namespace Users.Infrastructure {public class AppIdentityDbContext : IdentityDbContext<AppUser> {public AppIdentityDbContext() : base("IdentityDb") { }static AppIdentityDbContext() {Database.SetInitializer<AppIdentityDbContext>(new IdentityDbInit());}public static AppIdentityDbContext Create() {return new AppIdentityDbContext();} } public class IdentityDbInit : NullDatabaseInitializer<AppIdentityDbContext> {} } I have removed the methods defined by the class and changed its base to NullDatabaseInitializer<AppIdentityDbContext> , which prevents the schema from being altered. 我删除了这个类中所定义的方法，并将它的基类改为NullDatabaseInitializer<AppIdentityDbContext> ，它可以防止架构修改。 15.2.3 Performing the Migration 15.2.3 执行迁移 All that remains is to generate and apply the migration. First, run the following command in the Package Manager Console: 剩下的事情只是生成并运用迁移了。首先，在“Package Manager Console（包管理器控制台）”中执行以下命令： Add-Migration CityProperty This creates a new migration called CityProperty (I like my migration names to reflect the changes I made). A class new file will be added to the Migrations folder, and its name reflects the time at which the command was run and the name of the migration. My file is called 201402262244036_CityProperty.cs, for example. The contents of this file contain the details of how Entity Framework will change the database during the migration, as shown in Listing 15-7. 这创建了一个名称为CityProperty的新迁移（我比较喜欢让迁移的名称反映出我所做的修改）。这会在文件夹中添加一个新的类文件，而且其命名会反映出该命令执行的时间以及迁移名称，例如，我的这个文件名称为201402262244036_CityProperty.cs。该文件的内容含有迁移期间Entity Framework修改数据库的细节，如清单15-7所示。 Listing 15-7. The Contents of the 201402262244036_CityProperty.cs File 清单15-7. 201402262244036_CityProperty.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity.Migrations; public partial class Init : DbMigration {public override void Up() {AddColumn("dbo.AspNetUsers", "City", c => c.Int(nullable: false));}public override void Down() {DropColumn("dbo.AspNetUsers", "City");} }} The Up method describes the changes that have to be made to the schema when the database is upgraded, which in this case means adding a City column to the AspNetUsers table, which is the one that is used to store user records in the ASP.NET Identity database. Up方法描述了在数据库升级时，需要对架构所做的修改，在这个例子中，意味着要在AspNetUsers数据表中添加City数据列，该数据表是ASP.NET Identity数据库用来存储用户记录的。 The final step is to perform the migration. Without starting the application, run the following command in the Package Manager Console: 最后一步是执行迁移。无需启动应用程序，只需在“Package Manager Console（包管理器控制台）”中运行以下命令即可： Update-Database –TargetMigration CityProperty The database schema will be modified, and the code in the Configuration.Seed method will be executed. The existing user accounts will have been preserved and enhanced with a City property (which I set to Paris in the Seed method). 这会修改数据库架构，并执行Configuration.Seed方法中的代码。已有用户账号会被保留，且增强了City属性（我在Seed方法中已将其设置为“Paris”）。 15.2.4 Testing the Migration 15.2.4 测试迁移 To test the effect of the migration, start the application, navigate to the /Home/UserProps URL, and authenticate as one of the Identity users (for example, as Alice with the password MySecret). Once authenticated, you will see the current value of the City property for the user and have the opportunity to change it, as shown in Figure 15-3. 为了测试迁移的效果，启动应用程序，导航到/Home/UserProps URL，并以Identity中的用户（例如Alice，口令MySecret）进行认证。一旦已被认证，便会看到该用户City属性的当前值，并可以对其进行修改，如图15-3所示。 Figure 15-3. Displaying and changing a custom user property 图15-3. 显示和个性自定义用户属性 15.2.5 Defining an Additional Property 15.2.5 定义附加属性 Now that database migrations are set up, I am going to define a further property just to demonstrate how subsequent changes are handled and to show a more useful (and less dangerous) example of using the Configuration.Seed method. Listing 15-8 shows how I added a Country property to the AppUser class. 现在，已经建立了数据库迁移，我打算再定义一个属性，这恰恰演示了如何处理持续不断的修改，也为了演示Configuration.Seed方法更有用（至少无害）的示例。清单15-8显示了我在AppUser类上添加了一个Country属性。 Listing 15-8. Adding Another Property in the AppUserModels.cs File 清单15-8. 在AppUserModels.cs文件中添加另一个属性 using System;using Microsoft.AspNet.Identity.EntityFramework; namespace Users.Models {public enum Cities {LONDON, PARIS, CHICAGO} public enum Countries {NONE, UK, FRANCE, USA}public class AppUser : IdentityUser {public Cities City { get; set; }public Countries Country { get; set; }public void SetCountryFromCity(Cities city) {switch (city) {case Cities.LONDON:Country = Countries.UK;break;case Cities.PARIS:Country = Countries.FRANCE;break;case Cities.CHICAGO:Country = Countries.USA;break;default:Country = Countries.NONE;break;} }} } I have added an enumeration to define the country names and a helper method that selects a country value based on the City property. Listing 15-9 shows the change I made to the Configuration class so that the Seed method sets the Country property based on the City, but only if the value of Country is NONE (which it will be for all users when the database is migrated because the Entity Framework sets enumeration columns to the first value). 我已经添加了一个枚举，它定义了国家名称。还添加了一个辅助器方法，它可以根据City属性选择一个国家。清单15-9显示了对Configuration类所做的修改，以使Seed方法根据City设置Country属性，但只当Country为NONE时才进行设置（在迁移数据库时，所有用户都是NONE，因为Entity Framework会将枚举列设置为枚举的第一个值）。 Listing 15-9. Modifying the Database Seed in the Configuration.cs File 清单15-9. 在Configuration.cs文件中修改数据库种子 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models; namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);} foreach (AppUser dbUser in userMgr.Users) {if (dbUser.Country == Countries.NONE) {dbUser.SetCountryFromCity(dbUser.City);} }context.SaveChanges();} }} This kind of seeding is more useful in a real project because it will set a value for the Country property only if one has not already been set—subsequent migrations won’t be affected, and user selections won’t be lost. 这种种植在实际项目中会更有用，因为它只会在Country属性未设置时，才会设置Country属性的值——后继的迁移不会受到影响，因此不会失去用户的选择。 1. Adding Application Support 1. 添加应用程序支持 There is no point defining additional user properties if they are not available in the application, so Listing 15-10 shows the change I made to the Views/Home/UserProps.cshtml file to display the value of the Country property. 应用程序中如果没有定义附加属性的地方，则附加属性就无法使用了，因此，清单15-10显示了我对Views/Home/UserProps.cshtml文件的修改，以显示Country属性的值。 Listing 15-10. Displaying an Additional Property in the UserProps.cshtml File 清单15-10. 在UserProps.cshtml文件中显示附加属性 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";} <div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr> <tr><th>Country</th><td>@Model.Country</td></tr></table></div>@using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Listing 15-11 shows the corresponding change I made to the Home controller to update the Country property when the City value changes. 为了在City值变化时能够更新Country属性，清单15-11显示了我对Home控制器所做的相应修改。 Listing 15-11. Setting Custom Properties in the HomeController.cs File 清单15-11. 在HomeController.cs文件中设置自定义属性 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models; namespace Users.Controllers {public class HomeController : Controller {// ...other action methods omitted for brevity...// ...出于简化，这里忽略了其他动作方法... [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;user.SetCountryFromCity(city);await UserManager.UpdateAsync(user);return View(user);}// ...properties omitted for brevity...// ...出于简化，这里忽略了一些属性...} } 2. Performing the Migration 2. 准备迁移 All that remains is to create and apply a new migration. Enter the following command into the Package Manager Console: 剩下的事情就是创建和运用新的迁移了。在“Package Manager Console（包管理器控制台）”中输入以下命令： Add-Migration CountryProperty This will generate another file in the Migrations folder that contains the instruction to add the Country column. To apply the migration, execute the following command: 这将在Migrations文件夹中生成另一个文件，它含有添加Country数据表列的指令。为了运用迁移，可执行以下命令： Update-Database –TargetMigration CountryProperty The migration will be performed, and the value of the Country property will be set based on the value of the existing City property for each user. You can check the new user property by starting the application and authenticating and navigating to the /Home/UserProps URL, as shown in Figure 15-4. 这将执行迁移，Country属性的值将根据每个用户当前的City属性进行设置。通过启动应用程序，认证并导航到/Home/UserProps URL，便可以查看新的用户属性，如图15-4所示。 Figure 15-4. Creating an additional user property 图15-4. 创建附加用户属性 Tip Although I am focused on the process of upgrading the database, you can also migrate back to a previous version by specifying an earlier migration. Use the –Force argument make changes that cause data loss, such as removing a column. 提示：虽然我们关注了升级数据库的过程，但你也可以回退到以前的版本，只需指定一个早期的迁移即可。使用-Force参数进行修改，会引起数据丢失，例如删除数据表列。 15.3 Working with Claims 15.3 使用声明（Claims） In older user-management systems, such as ASP.NET Membership, the application was assumed to be the authoritative source of all information about the user, essentially treating the application as a closed world and trusting the data that is contained within it. 在旧的用户管理系统中，例如ASP.NET Membership，应用程序被假设成是用户所有信息的权威来源，本质上将应用程序视为是一个封闭的世界，并且只信任其中所包含的数据。 This is such an ingrained approach to software development that it can be hard to recognize that’s what is happening, but you saw an example of the closed-world technique in Chapter 14 when I authenticated users against the credentials stored in the database and granted access based on the roles associated with those credentials. I did the same thing again in this chapter when I added properties to the user class. Every piece of information that I needed to manage user authentication and authorization came from within my application—and that is a perfectly satisfactory approach for many web applications, which is why I demonstrated these techniques in such depth. 这是软件开发的一种根深蒂固的方法，使人很难认识到这到底意味着什么，第14章你已看到了这种封闭世界技术的例子，根据存储在数据库中的凭据来认证用户，并根据与凭据关联在一起的角色来授权访问。本章前述在用户类上添加属性，也做了同样的事情。我管理用户认证与授权所需的每一个数据片段都来自于我的应用程序——而且这是许多Web应用程序都相当满意的一种方法，这也是我如此深入地演示这些技术的原因。 ASP.NET Identity also supports an alternative approach for dealing with users, which works well when the MVC framework application isn’t the sole source of information about users and which can be used to authorize users in more flexible and fluid ways than traditional roles allow. ASP.NET Identity还支持另一种处理用户的办法，当MVC框架的应用程序不是有关用户的唯一信息源时，这种办法会工作得很好，而且能够比传统的角色授权更为灵活且流畅的方式进行授权。 This alternative approach uses claims, and in this section I’ll describe how ASP.NET Identity supports claims-based authorization. Table 15-4 puts claims in context. 这种可选的办法使用了“Claims（声明）”，因此在本小节中，我将描述ASP.NET Identity如何支持“Claims-Based Authorization（基于声明的授权）”。表15-4描述了声明（Claims）的情形。 提示：“Claim”在英文字典中不完全是“声明”的意思，根据本文的描述，感觉把它说成“声明”也不一定合适，所以在之后的译文中基本都写成中英文并用的形式，即“声明（Claims）”。根据表15-4中的声明（Claims）的定义：声明（Claims）是关于用户的一些信息片段。一个用户的信息片段当然有很多，每一个信息片段就是一项声明（Claim），用户的所有信息片段合起来就是该用户的声明（Claims）。请读者注意该单词的单复数形式——译者注 Table 15-4. Putting Claims in Context 表15-4. 声明（Claims）的情形 Question 问题 Answer 答案 What is it? 什么是声明（Claims）？ Claims are pieces of information about users that you can use to make authorization decisions. Claims can be obtained from external systems as well as from the local Identity database. 声明（Claims）是关于用户的一些信息片段，可以用它们做出授权决定。声明（Claims）可以从外部系统获取，也可以从本地的Identity数据库获取。 Why should I care? 为何要关心它？ Claims can be used to flexibly authorize access to action methods. Unlike conventional roles, claims allow access to be driven by the information that describes the user. 声明（Claims）可以用来对动作方法进行灵活的授权访问。与传统的角色不同，声明（Claims）让访问能够由描述用户的信息进行驱动。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework, but it is integrated into the standard authorization features, such as the Authorize attribute. 这不是直接由MVC框架使用的特性，但它集成到了标准的授权特性之中，例如Authorize注解属性。 Tip you don’t have to use claims in your applications, and as Chapter 14 showed, ASP.NET Identity is perfectly happy providing an application with the authentication and authorization services without any need to understand claims at all. 提示：你在应用程序中不一定要使用声明（Claims），正如第14章所展示的那样，ASP.NET Identity能够为应用程序提供充分的认证与授权服务，而根本不需要理解声明（Claims）。 15.3.1 Understanding Claims 15.3.1 理解声明（Claims） A claim is a piece of information about the user, along with some information about where the information came from. The easiest way to unpack claims is through some practical demonstrations, without which any discussion becomes too abstract to be truly useful. To get started, I added a Claims controller to the example project, the definition of which you can see in Listing 15-12. 一项声明（Claim）是关于用户的一个信息片段（请注意这个英文单词的单复数形式——译者注），并伴有该片段出自何处的某种信息。揭开声明（Claims）含义最容易的方式是做一些实际演示，任何讨论都会过于抽象根本没有真正的用处。为此，我在示例项目中添加了一个Claims控制器，其定义如清单15-12所示。 Listing 15-12. The Contents of the ClaimsController.cs File 清单15-12. ClaimsController.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} }} } Tip You may feel a little lost as I define the code for this example. Don’t worry about the details for the moment—just stick with it until you see the output from the action method and view that I define. More than anything else, that will help put claims into perspective. 提示：你或许会对我为此例定义的代码感到有点失望。此刻对此细节不必着急——只要稍事忍耐，当看到该动作方法和视图的输出便会明白。尤为重要的是，这有助于洞察声明（Claims）。 You can get the claims associated with a user in different ways. One approach is to use the Claims property defined by the user class, but in this example, I have used the HttpContext.User.Identity property to demonstrate the way that ASP.NET Identity is integrated with the rest of the ASP.NET platform. As I explained in Chapter 13, the HttpContext.User.Identity property returns an implementation of the IIdentity interface, which is a ClaimsIdentity object when working using ASP.NET Identity. The ClaimsIdentity class is defined in the System.Security.Claims namespace, and Table 15-5 shows the members it defines that are relevant to this chapter. 可以通过不同的方式获得与用户相关联的声明（Claims）。方法之一就是使用由用户类定义的Claims属性，但在这个例子中，我使用了HttpContext.User.Identity属性，目的是演示ASP.NET Identity与ASP.NET平台集成的方式（请注意这句话所表示的含义：用户类的Claims属性属于ASP.NET Identity，而HttpContext.User.Identity属性则属于ASP.NET平台。由此可见，ASP.NET Identity已经融合到了ASP.NET平台之中——译者注）。正如第13章所解释的那样，HttpContext.User.Identity属性返回IIdentity的接口实现，当使用ASP.NET Identity时，该实现是一个ClaimsIdentity对象。ClaimsIdentity类是在System.Security.Claims命名空间中定义的，表15-5显示了它所定义的与本章有关的成员。 Table 15-5. The Members Defined by the ClaimsIdentity Class 表15-5. ClaimsIdentity类所定义的成员 Name 名称 Description 描述 Claims Returns an enumeration of Claim objects representing the claims for the user. 返回表示用户声明（Claims）的Claim对象枚举 AddClaim(claim) Adds a claim to the user identity. 给用户添加一个声明（Claim） AddClaims(claims) Adds an enumeration of Claim objects to the user identity. 给用户添加Claim对象的枚举。 HasClaim(predicate) Returns true if the user identity contains a claim that matches the specified predicate. See the “Applying Claims” section for an example predicate. 如果用户含有与指定谓词匹配的声明（Claim）时，返回true。参见“运用声明（Claims）”中的示例谓词 RemoveClaim(claim) Removes a claim from the user identity. 删除用户的声明（Claim）。 Other members are available, but the ones in the table are those that are used most often in web applications, for reason that will become obvious as I demonstrate how claims fit into the wider ASP.NET platform. 还有一些可用的其它成员，但表中的这些是在Web应用程序中最常用的，随着我演示如何将声明（Claims）融入更宽泛的ASP.NET平台，它们为什么最常用就很显然了。 In Listing 15-12, I cast the IIdentity implementation to the ClaimsIdentity type and pass the enumeration of Claim objects returned by the ClaimsIdentity.Claims property to the View method. A Claim object represents a single piece of data about the user, and the Claim class defines the properties shown in Table 15-6. 在清单15-12中，我将IIdentity实现转换成了ClaimsIdentity类型，并且给View方法传递了ClaimsIdentity.Claims属性所返回的Claim对象的枚举。Claim对象所示表示的是关于用户的一个单一的数据片段，Claim类定义的属性如表15-6所示。 Table 15-6. The Properties Defined by the Claim Class 表15-6. Claim类定义的属性 Name 名称 Description 描述 Issuer Returns the name of the system that provided the claim 返回提供声明（Claim）的系统名称 Subject Returns the ClaimsIdentity object for the user who the claim refers to 返回声明（Claim）所指用户的ClaimsIdentity对象 Type Returns the type of information that the claim represents 返回声明（Claim）所表示的信息类型 Value Returns the piece of information that the claim represents 返回声明（Claim）所表示的信息片段 Listing 15-13 shows the contents of the Index.cshtml file that I created in the Views/Claims folder and that is rendered by the Index action of the Claims controller. The view adds a row to a table for each claim about the user. 清单15-13显示了我在Views/Claims文件夹中创建的Index.cshtml文件的内容，它由Claims控制器中的Index动作方法进行渲染。该视图为用户的每项声明（Claim）添加了一个表格行。 Listing 15-13. The Contents of the Index.cshtml File in the Views/Claims Folder 清单15-13. Views/Claims文件夹中Index.cshtml文件的内容 @using System.Security.Claims@using Users.Infrastructure@model IEnumerable<Claim>@{ ViewBag.Title = "Claims"; }<div class="panel panel-primary"><div class="panel-heading">Claims</div><table class="table table-striped"><tr><th>Subject</th><th>Issuer</th><th>Type</th><th>Value</th></tr>@foreach (Claim claim in Model.OrderBy(x => x.Type)) {<tr><td>@claim.Subject.Name</td><td>@claim.Issuer</td><td>@Html.ClaimType(claim.Type)</td><td>@claim.Value</td></tr>}</table></div> The value of the Claim.Type property is a URI for a Microsoft schema, which isn’t especially useful. The popular schemas are used as the values for fields in the System.Security.Claims.ClaimTypes class, so to make the output from the Index.cshtml view easier to read, I added an HTML helper to the IdentityHelpers.cs file, as shown in Listing 15-14. It is this helper that I use in the Index.cshtml file to format the value of the Claim.Type property. Claim.Type属性的值是一个微软模式（Microsoft Schema）的URI（统一资源标识符），这是特别有用的。System.Security.Claims.ClaimTypes类中字段的值使用的是流行模式（Popular Schema），因此为了使Index.cshtml视图的输出更易于阅读，我在IdentityHelpers.cs文件中添加了一个HTML辅助器，如清单15-14所示。Index.cshtml文件正是使用这个辅助器格式化了Claim.Type属性的值。 Listing 15-14. Adding a Helper to the IdentityHelpers.cs File 清单15-14. 在IdentityHelpers.cs文件中添加辅助器 using System.Web;using System.Web.Mvc;using Microsoft.AspNet.Identity.Owin;using System;using System.Linq;using System.Reflection;using System.Security.Claims;namespace Users.Infrastructure {public static class IdentityHelpers {public static MvcHtmlString GetUserName(this HtmlHelper html, string id) {AppUserManager mgr= HttpContext.Current.GetOwinContext().GetUserManager<AppUserManager>();return new MvcHtmlString(mgr.FindByIdAsync(id).Result.UserName);} public static MvcHtmlString ClaimType(this HtmlHelper html, string claimType) {FieldInfo[] fields = typeof(ClaimTypes).GetFields();foreach (FieldInfo field in fields) {if (field.GetValue(null).ToString() == claimType) {return new MvcHtmlString(field.Name);} }return new MvcHtmlString(string.Format("{0}",claimType.Split('/', '.').Last()));} }} Note The helper method isn’t at all efficient because it reflects on the fields of the ClaimType class for each claim that is displayed, but it is sufficient for my purposes in this chapter. You won’t often need to display the claim type in real applications. 注：该辅助器并非十分有效，因为它只是针对每个要显示的声明（Claim）映射出ClaimType类的字段，但对我要的目的已经足够了。在实际项目中不会经常需要显示声明（Claim）的类型。 To see why I have created a controller that uses claims without really explaining what they are, start the application, authenticate as the user Alice (with the password MySecret), and request the /Claims/Index URL. Figure 15-5 shows the content that is generated. 为了弄明白我为何要先创建一个使用声明（Claims）的控制器，而没有真正解释声明（Claims）是什么的原因，可以启动应用程序，以用户Alice进行认证（其口令是MySecret），并请求/Claims/Index URL。图15-5显示了生成的内容。 Figure 15-5. The output from the Index action of the Claims controller 图15-5. Claims控制器中Index动作的输出 It can be hard to make out the detail in the figure, so I have reproduced the content in Table 15-7. 这可能还难以认识到此图的细节，为此我在表15-7中重列了其内容。 Table 15-7. The Data Shown in Figure 15-5 表15-7. 图15-5中显示的数据 Subject（科目） Issuer（发行者） Type（类型） Value（值） Alice LOCAL AUTHORITY SecurityStamp Unique ID Alice LOCAL AUTHORITY IdentityProvider ASP.NET Identity Alice LOCAL AUTHORITY Role Employees Alice LOCAL AUTHORITY Role Users Alice LOCAL AUTHORITY Name Alice Alice LOCAL AUTHORITY NameIdentifier Alice’s user ID The table shows the most important aspect of claims, which is that I have already been using them when I implemented the traditional authentication and authorization features in Chapter 14. You can see that some of the claims relate to user identity (the Name claim is Alice, and the NameIdentifier claim is Alice’s unique user ID in my ASP.NET Identity database). 此表展示了声明（Claims）最重要的方面，这些是我在第14章中实现传统的认证和授权特性时，一直在使用的信息。可以看出，有些声明（Claims）与用户标识有关（Name声明是Alice，NameIdentifier声明是Alice在ASP.NET Identity数据库中的唯一用户ID号）。 Other claims show membership of roles—there are two Role claims in the table, reflecting the fact that Alice is assigned to both the Users and Employees roles. There is also a claim about how Alice has been authenticated: The IdentityProvider is set to ASP.NET Identity. 其他声明（Claims）显示了角色成员——表中有两个Role声明（Claim），体现出Alice被赋予了Users和Employees两个角色这一事实。还有一个是Alice已被认证的声明（Claim）：IdentityProvider被设置到了ASP.NET Identity。 The difference when this information is expressed as a set of claims is that you can determine where the data came from. The Issuer property for all the claims shown in the table is set to LOCAL AUTHORITY, which indicates that the user’s identity has been established by the application. 当这种信息被表示成一组声明（Claims）时的差别是，你能够确定这些数据是从哪里来的。表中所显示的所有声明的Issuer属性（发布者）都被设置到了LOACL AUTHORITY（本地授权），这说明该用户的标识是由应用程序建立的。 So, now that you have seen some example claims, I can more easily describe what a claim is. A claim is any piece of information about a user that is available to the application, including the user’s identity and role memberships. And, as you have seen, the information I have been defining about my users in earlier chapters is automatically made available as claims by ASP.NET Identity. 因此，现在你已经看到了一些声明（Claims）示例，我可以更容易地描述声明（Claim）是什么了。一项声明（Claim）是可用于应用程序中的有关用户的一个信息片段，包括用户的标识以及角色成员等。而且，正如你所看到的，我在前几章定义的关于用户的信息，被ASP.NET Identity自动地作为声明（Claims）了。 15.3.2 Creating and Using Claims 15.3.2 创建和使用声明（Claims） Claims are interesting for two reasons. The first reason is that an application can obtain claims from multiple sources, rather than just relying on a local database for information about the user. You will see a real example of this when I show you how to authenticate users through a third-party system in the “Using Third-Party Authentication” section, but for the moment I am going to add a class to the example project that simulates a system that provides claims information. Listing 15-15 shows the contents of the LocationClaimsProvider.cs file that I added to the Infrastructure folder. 声明（Claims）比较有意思的原因有两个。第一个原因是应用程序可以从多个来源获取声明（Claims），而不是只能依靠本地数据库关于用户的信息。你将会看到一个实际的示例，在“使用第三方认证”小节中，将演示如何通过第三方系统来认证用户。不过，此刻我只打算在示例项目中添加一个类，用以模拟一个提供声明（Claims）信息的系统。清单15-15显示了我添加到Infrastructure文件夹中LocationClaimsProvider.cs文件的内容。 Listing 15-15. The Contents of the LocationClaimsProvider.cs File 清单15-15. LocationClaimsProvider.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public static class LocationClaimsProvider {public static IEnumerable<Claim> GetClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.Name.ToLower() == "alice") {claims.Add(CreateClaim(ClaimTypes.PostalCode, "DC 20500"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "DC"));} else {claims.Add(CreateClaim(ClaimTypes.PostalCode, "NY 10036"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "NY"));}return claims;}private static Claim CreateClaim(string type, string value) {return new Claim(type, value, ClaimValueTypes.String, "RemoteClaims");} }} The GetClaims method takes a ClaimsIdentity argument and uses the Name property to create claims about the user’s ZIP code and state. This class allows me to simulate a system such as a central HR database, which would be the authoritative source of location information about staff, for example. GetClaims方法以ClaimsIdentity为参数，并使用Name属性创建了关于用户ZIP码（邮政编码）和州府的声明（Claims）。上述这个类使我能够模拟一个诸如中心化的HR数据库（人力资源数据库）之类的系统，它可能会成为全体职员的地点信息的权威数据源。 Claims are associated with the user’s identity during the authentication process, and Listing 15-16 shows the changes I made to the Login action method of the Account controller to call the LocationClaimsProvider class. 在认证过程期间，声明（Claims）是与用户标识关联在一起的，清单15-16显示了我对Account控制器中Login动作方法所做的修改，以便调用LocationClaimsProvider类。 Listing 15-16. Associating Claims with a User in the AccountController.cs File 清单15-16. AccountController.cs文件中用户用声明的关联 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... You can see the effect of the location claims by starting the application, authenticating as a user, and requesting the /Claim/Index URL. Figure 15-6 shows the claims for Alice. You may have to sign out and sign back in again to see the change. 为了看看这个地点声明（Claims）的效果，可以启动应用程序，以一个用户进行认证，并请求/Claim/Index URL。图15-6显示了Alice的声明（Claims）。你可能需要退出，然后再次登录才会看到发生的变化。 Figure 15-6. Defining additional claims for users 图15-6. 定义用户的附加声明 Obtaining claims from multiple locations means that the application doesn’t have to duplicate data that is held elsewhere and allows integration of data from external parties. The Claim.Issuer property tells you where a claim originated from, which helps you judge how accurate the data is likely to be and how much weight you should give the data in your application. Location data obtained from a central HR database is likely to be more accurate and trustworthy than data obtained from an external mailing list provider, for example. 从多个地点获取声明（Claims）意味着应用程序不必复制其他地方保持的数据，并且能够与外部的数据集成。Claim.Issuer属性（图15-6中的Issuer数据列——译者注）能够告诉你一个声明（Claim）的发源地，这有助于让你判断数据的精确程度，也有助于让你决定这类数据在应用程序中的权重。例如，从中心化的HR数据库获取的地点数据可能要比外部邮件列表提供器获取的数据更为精确和可信。 1. Applying Claims 1. 运用声明（Claims） The second reason that claims are interesting is that you can use them to manage user access to your application more flexibly than with standard roles. The problem with roles is that they are static, and once a user has been assigned to a role, the user remains a member until explicitly removed. This is, for example, how long-term employees of big corporations end up with incredible access to internal systems: They are assigned the roles they require for each new job they get, but the old roles are rarely removed. (The unexpectedly broad systems access sometimes becomes apparent during the investigation into how someone was able to ship the contents of the warehouse to their home address—true story.) 声明（Claims）有意思的第二个原因是，你可以用它们来管理用户对应用程序的访问，这要比标准的角色管理更为灵活。角色的问题在于它们是静态的，而且一旦用户已经被赋予了一个角色，该用户便是一个成员，直到明确地删除为止。例如，这意味着大公司的长期雇员，对内部系统的访问会十分惊人：他们每次在获得新工作时，都会赋予所需的角色，但旧角色很少被删除。（在调查某人为何能够将仓库里的东西发往他的家庭地址过程中发现，有时会出现异常宽泛的系统访问——真实的故事） Claims can be used to authorize users based directly on the information that is known about them, which ensures that the authorization changes when the data changes. The simplest way to do this is to generate Role claims based on user data that are then used by controllers to restrict access to action methods. Listing 15-17 shows the contents of the ClaimsRoles.cs file that I added to the Infrastructure. 声明（Claims）可以直接根据用户已知的信息对用户进行授权，这能够保证当数据发生变化时，授权也随之而变。此事最简单的做法是根据用户数据来生成Role声明（Claim），然后由控制器用来限制对动作方法的访问。清单15-17显示了我添加到Infrastructure中的ClaimsRoles.cs文件的内容。 Listing 15-17. The Contents of the ClaimsRoles.cs File 清单15-17. ClaimsRoles.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public class ClaimsRoles {public static IEnumerable<Claim> CreateRolesFromClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.HasClaim(x => x.Type == ClaimTypes.StateOrProvince&& x.Issuer == "RemoteClaims" && x.Value == "DC")&& user.HasClaim(x => x.Type == ClaimTypes.Role&& x.Value == "Employees")) {claims.Add(new Claim(ClaimTypes.Role, "DCStaff"));}return claims;} }} The gnarly looking CreateRolesFromClaims method uses lambda expressions to determine whether the user has a StateOrProvince claim from the RemoteClaims issuer with a value of DC and a Role claim with a value of Employees. If the user has both claims, then a Role claim is returned for the DCStaff role. Listing 15-18 shows how I call the CreateRolesFromClaims method from the Login action in the Account controller. CreateRolesFromClaims是一个粗糙的考察方法，它使用了Lambda表达式，以检查用户是否具有StateOrProvince声明（Claim），该声明来自于RemoteClaims发行者（Issuer），值为DC。也检查用户是否具有Role声明（Claim），其值为Employees。如果用户这两个声明都有，那么便返回一个DCStaff角色的Role声明。清单15-18显示了如何在Account控制器中的Login动作中调用CreateRolesFromClaims方法。 Listing 15-18. Generating Roles Based on Claims in the AccountController.cs File 清单15-18. 在AccountController.cs中根据声明生成角色 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(LocationClaimsProvider.GetClaims(ident)); ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... I can then restrict access to an action method based on membership of the DCStaff role. Listing 15-19 shows a new action method I added to the Claims controller to which I have applied the Authorize attribute. 然后我可以根据DCStaff角色的成员，来限制对一个动作方法的访问。清单15-19显示了在Claims控制器中添加的一个新的动作方法，在该方法上已经运用了Authorize注解属性。 Listing 15-19. Adding a New Action Method to the ClaimsController.cs File 清单15-19. 在ClaimsController.cs文件中添加一个新的动作方法 using System.Security.Claims;using System.Web;using System.Web.Mvc;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [Authorize(Roles="DCStaff")]public string OtherAction() {return "This is the protected action";} }} Users will be able to access OtherAction only if their claims grant them membership to the DCStaff role. Membership of this role is generated dynamically, so a change to the user’s employment status or location information will change their authorization level. 只要用户的声明（Claims）承认他们是DCStaff角色的成员，那么他们便能访问OtherAction动作。该角色的成员是动态生成的，因此，若是用户的雇用状态或地点信息发生变化，也会改变他们的授权等级。 提示：请读者从这个例子中吸取其中的思想精髓。对于读物的理解程度，仁者见仁，智者见智，能领悟多少，全凭各人，译者感觉这里的思想有无数的可能。举例说明：（1）可以根据用户的身份进行授权，比如学生在校时是“学生”，毕业后便是“校友”；（2）可以根据用户所处的部门进行授权，人事部用户属于人事团队，销售部用户属于销售团队，各团队有其自己的应用；（3）下一小节的示例是根据用户的地点授权。简言之：一方面用户的各种声明（Claim）都可以用来进行授权；另一方面用户的声明（Claim）又是可以自定义的。于是可能的运用就无法估计了。总之一句话，这种基于声明的授权（Claims-Based Authorization）有无限可能！要是没有我这里的提示，是否所有读者在此处都会有所体会？——译者注 15.3.3 Authorizing Access Using Claims 15.3.3 使用声明（Claims）授权访问 The previous example is an effective demonstration of how claims can be used to keep authorizations fresh and accurate, but it is a little indirect because I generate roles based on claims data and then enforce my authorization policy based on the membership of that role. A more direct and flexible approach is to enforce authorization directly by creating a custom authorization filter attribute. Listing 15-20 shows the contents of the ClaimsAccessAttribute.cs file, which I added to the Infrastructure folder and used to create such a filter. 前面的示例有效地演示了如何用声明（Claims）来保持新鲜和准确的授权，但有点不太直接，因为我要根据声明（Claims）数据来生成了角色，然后强制我的授权策略基于角色成员。一个更直接且灵活的办法是直接强制授权，其做法是创建一个自定义的授权过滤器注解属性。清单15-20演示了ClaimsAccessAttribute.cs文件的内容，我将它添加在Infrastructure文件夹中，并用它创建了这种过滤器。 Listing 15-20. The Contents of the ClaimsAccessAttribute.cs File 清单15-20. ClaimsAccessAttribute.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Infrastructure {public class ClaimsAccessAttribute : AuthorizeAttribute {public string Issuer { get; set; }public string ClaimType { get; set; }public string Value { get; set; }protected override bool AuthorizeCore(HttpContextBase context) {return context.User.Identity.IsAuthenticated&& context.User.Identity is ClaimsIdentity&& ((ClaimsIdentity)context.User.Identity).HasClaim(x =>x.Issuer == Issuer && x.Type == ClaimType && x.Value == Value);} }} The attribute I have defined is derived from the AuthorizeAttribute class, which makes it easy to create custom authorization policies in MVC framework applications by overriding the AuthorizeCore method. My implementation grants access if the user is authenticated, the IIdentity implementation is an instance of ClaimsIdentity, and the user has a claim with the issuer, type, and value matching the class properties. Listing 15-21 shows how I applied the attribute to the Claims controller to authorize access to the OtherAction method based on one of the location claims created by the LocationClaimsProvider class. 我所定义的这个注解属性派生于AuthorizeAttribute类，通过重写AuthorizeCore方法，很容易在MVC框架应用程序中创建自定义的授权策略。在这个实现中，若用户是已认证的、其IIdentity实现是一个ClaimsIdentity实例，而且该用户有一个带有issuer、type以及value的声明（Claim），它们与这个类的属性是匹配的，则该用户便是允许访问的。清单15-21显示了如何将这个注解属性运用于Claims控制器，以便根据LocationClaimsProvider类创建的地点声明（Claim），对OtherAction方法进行授权访问。 Listing 15-21. Performing Authorization on Claims in the ClaimsController.cs File 清单15-21. 在ClaimsController.cs文件中执行基于声明的授权 using System.Security.Claims;using System.Web;using System.Web.Mvc;using Users.Infrastructure;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [ClaimsAccess(Issuer="RemoteClaims", ClaimType=ClaimTypes.PostalCode,Value="DC 20500")]public string OtherAction() {return "This is the protected action";} }} My authorization filter ensures that only users whose location claims specify a ZIP code of DC 20500 can invoke the OtherAction method. 这个授权过滤器能够确保只有地点声明（Claim）的邮编为DC 20500的用户才能请求OtherAction方法。 15.4 Using Third-Party Authentication 15.4 使用第三方认证 One of the benefits of a claims-based system such as ASP.NET Identity is that any of the claims can come from an external system, even those that identify the user to the application. This means that other systems can authenticate users on behalf of the application, and ASP.NET Identity builds on this idea to make it simple and easy to add support for authenticating users through third parties such as Microsoft, Google, Facebook, and Twitter. 基于声明的系统，如ASP.NET Identity，的好处之一是任何声明都可以来自于外部系统，即使是将用户标识到应用程序的那些声明。这意味着其他系统可以代表应用程序来认证用户，而ASP.NET Identity就建立在这样的思想之上，使之能够简单而方便地添加第三方认证用户的支持，如微软、Google、Facebook、Twitter等。 There are some substantial benefits of using third-party authentication: Many users will already have an account, users can elect to use two-factor authentication, and you don’t have to manage user credentials in the application. In the sections that follow, I’ll show you how to set up and use third-party authentication for Google users, which Table 15-8 puts into context. 使用第三方认证有一些实际的好处：许多用户已经有了账号、用户可以选择使用双因子认证、你不必在应用程序中管理用户凭据等等。在以下小节中，我将演示如何为Google用户建立并使用第三方认证，表15-8描述了事情的情形。 Table 15-8. Putting Third-Party Authentication in Context 表15-8. 第三方认证情形 Question 问题 Answer 回答 What is it? 什么是第三方认证？ Authenticating with third parties lets you take advantage of the popularity of companies such as Google and Facebook. 第三方认证使你能够利用流行公司，如Google和Facebook，的优势。 Why should I care? 为何要关心它？ Users don’t like having to remember passwords for many different sites. Using a provider with large-scale adoption can make your application more appealing to users of the provider’s services. 用户不喜欢记住许多不同网站的口令。使用大范围适应的提供器可使你的应用程序更吸引有提供器服务的用户。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework. 这不是一个直接由MVC框架使用的特性。 Note The reason I have chosen to demonstrate Google authentication is that it is the only option that doesn’t require me to register my application with the authentication service. You can get details of the registration processes required at http://bit.ly/1cqLTrE. 提示：我选择演示Google认证的原因是，它是唯一不需要在其认证服务中注册我应用程序的公司。有关认证服务注册过程的细节，请参阅http://bit.ly/1cqLTrE。 15.4.1 Enabling Google Authentication 15.4.1 启用Google认证 ASP.NET Identity comes with built-in support for authenticating users through their Microsoft, Google, Facebook, and Twitter accounts as well more general support for any authentication service that supports OAuth. The first step is to add the NuGet package that includes the Google-specific additions for ASP.NET Identity. Enter the following command into the Package Manager Console: ASP.NET Identity带有通过Microsoft、Google、Facebook以及Twitter账号认证用户的内建支持，并且对于支持OAuth的认证服务具有更普遍的支持。第一个步骤是添加NuGet包，包中含有用于ASP.NET Identity的Google专用附件。请在“Package Manager Console（包管理器控制台）”中输入以下命令： Install-Package Microsoft.Owin.Security.Google -version 2.0.2 There are NuGet packages for each of the services that ASP.NET Identity supports, as described in Table 15-9. 对于ASP.NET Identity支持的每一种服务都有相应的NuGet包，如表15-9所示。 Table 15-9. The NuGet Authenticaton Packages 表15-9. NuGet认证包 Name 名称 Description 描述 Microsoft.Owin.Security.Google Authenticates users with Google accounts 用Google账号认证用户 Microsoft.Owin.Security.Facebook Authenticates users with Facebook accounts 用Facebook账号认证用户 Microsoft.Owin.Security.Twitter Authenticates users with Twitter accounts 用Twitter账号认证用户 Microsoft.Owin.Security.MicrosoftAccount Authenticates users with Microsoft accounts 用Microsoft账号认证用户 Microsoft.Owin.Security.OAuth Authenticates users against any OAuth 2.0 service 根据任一OAuth 2.0服务认证用户 Once the package is installed, I enable support for the authentication service in the OWIN startup class, which is defined in the App_Start/IdentityConfig.cs file in the example project. Listing 15-22 shows the change that I have made. 一旦安装了这个包，便可以在OWIN启动类中启用此项认证服务的支持，启动类的定义在示例项目的App_Start/IdentityConfig.cs文件中。清单15-22显示了所做的修改。 Listing 15-22. Enabling Google Authentication in the IdentityConfig.cs File 清单15-22. 在IdentityConfig.cs文件中启用Google认证 using Microsoft.AspNet.Identity;using Microsoft.Owin;using Microsoft.Owin.Security.Cookies;using Owin;using Users.Infrastructure;using Microsoft.Owin.Security.Google;namespace Users {public class IdentityConfig {public void Configuration(IAppBuilder app) {app.CreatePerOwinContext<AppIdentityDbContext>(AppIdentityDbContext.Create);app.CreatePerOwinContext<AppUserManager>(AppUserManager.Create);app.CreatePerOwinContext<AppRoleManager>(AppRoleManager.Create); app.UseCookieAuthentication(new CookieAuthenticationOptions {AuthenticationType = DefaultAuthenticationTypes.ApplicationCookie,LoginPath = new PathString("/Account/Login"),}); app.UseExternalSignInCookie(DefaultAuthenticationTypes.ExternalCookie);app.UseGoogleAuthentication();} }} Each of the packages that I listed in Table 15-9 contains an extension method that enables the corresponding service. The extension method for the Google service is called UseGoogleAuthentication, and it is called on the IAppBuilder implementation that is passed to the Configuration method. 表15-9所列的每个包都含有启用相应服务的扩展方法。用于Google服务的扩展方法名称为UseGoogleAuthentication，它通过传递给Configuration方法的IAppBuilder实现进行调用。 Next I added a button to the Views/Account/Login.cshtml file, which allows users to log in via Google. You can see the change in Listing 15-23. 下一步骤是在Views/Account/Login.cshtml文件中添加一个按钮，让用户能够通过Google进行登录。所做的修改如清单15-23所示。 Listing 15-23. Adding a Google Login Button to the Login.cshtml File 清单15-23. 在Login.cshtml文件中添加Google登录按钮 @model Users.Models.LoginModel@{ ViewBag.Title = "Login";}<h2>Log In</h2> @Html.ValidationSummary()@using (Html.BeginForm()) {@Html.AntiForgeryToken();<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><div class="form-group"><label>Name</label>@Html.TextBoxFor(x => x.Name, new { @class = "form-control" })</div><div class="form-group"><label>Password</label>@Html.PasswordFor(x => x.Password, new { @class = "form-control" })</div><button class="btn btn-primary" type="submit">Log In</button>}@using (Html.BeginForm("GoogleLogin", "Account")) {<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><button class="btn btn-primary" type="submit">Log In via Google</button>} The new button submits a form that targets the GoogleLogin action on the Account controller. You can see this method—and the other changes I made the controller—in Listing 15-24. 新按钮递交一个表单，目标是Account控制器中的GoogleLogin动作。可从清单15-24中看到该方法，以及在控制器中所做的其他修改。 Listing 15-24. Adding Support for Google Authentication to the AccountController.cs File 清单15-24. 在AccountController.cs文件中添加Google认证支持 using System.Threading.Tasks;using System.Web.Mvc;using Users.Models;using Microsoft.Owin.Security;using System.Security.Claims;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Infrastructure;using System.Web; namespace Users.Controllers {[Authorize]public class AccountController : Controller {[AllowAnonymous]public ActionResult Login(string returnUrl) {if (HttpContext.User.Identity.IsAuthenticated) {return View("Error", new string[] { "Access Denied" });}ViewBag.returnUrl = returnUrl;return View();}[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident)); AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);} [HttpPost][AllowAnonymous]public ActionResult GoogleLogin(string returnUrl) {var properties = new AuthenticationProperties {RedirectUri = Url.Action("GoogleLoginCallback",new { returnUrl = returnUrl})};HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();}[AllowAnonymous]public async Task<ActionResult> GoogleLoginCallback(string returnUrl) {ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();AppUser user = await UserManager.FindAsync(loginInfo.Login);if (user == null) {user = new AppUser {Email = loginInfo.Email,UserName = loginInfo.DefaultUserName,City = Cities.LONDON, Country = Countries.UK};IdentityResult result = await UserManager.CreateAsync(user);if (!result.Succeeded) {return View("Error", result.Errors);} else {result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);if (!result.Succeeded) {return View("Error", result.Errors);} }}ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false }, ident);return Redirect(returnUrl ?? "/");}[Authorize]public ActionResult Logout() {AuthManager.SignOut();return RedirectToAction("Index", "Home");}private IAuthenticationManager AuthManager {get {return HttpContext.GetOwinContext().Authentication;} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } The GoogleLogin method creates an instance of the AuthenticationProperties class and sets the RedirectUri property to a URL that targets the GoogleLoginCallback action in the same controller. The next part is a magic phrase that causes ASP.NET Identity to respond to an unauthorized error by redirecting the user to the Google authentication page, rather than the one defined by the application: GoogleLogin方法创建了AuthenticationProperties类的一个实例，并为RedirectUri属性设置了一个URL，其目标为同一控制器中的GoogleLoginCallback动作。下一个部分是一个神奇阶段，通过将用户重定向到Google认证页面，而不是应用程序所定义的认证页面，让ASP.NET Identity对未授权的错误进行响应： ...HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();... This means that when the user clicks the Log In via Google button, their browser is redirected to the Google authentication service and then redirected back to the GoogleLoginCallback action method once they are authenticated. 这意味着，当用户通过点击Google按钮进行登录时，浏览器被重定向到Google的认证服务，一旦在那里认证之后，便被重定向回GoogleLoginCallback动作方法。 I get details of the external login by calling the GetExternalLoginInfoAsync of the IAuthenticationManager implementation, like this: 我通过调用IAuthenticationManager实现的GetExternalLoginInfoAsync方法，我获得了外部登录的细节，如下所示： ...ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();... The ExternalLoginInfo class defines the properties shown in Table 15-10. ExternalLoginInfo类定义的属性如表15-10所示： Table 15-10. The Properties Defined by the ExternalLoginInfo Class 表15-10. ExternalLoginInfo类所定义的属性 Name 名称 Description 描述 DefaultUserName Returns the username 返回用户名 Email Returns the e-mail address 返回E-mail地址 ExternalIdentity Returns a ClaimsIdentity that identities the user 返回标识该用户的ClaimsIdentity Login Returns a UserLoginInfo that describes the external login 返回描述外部登录的UserLoginInfo I use the FindAsync method defined by the user manager class to locate the user based on the value of the ExternalLoginInfo.Login property, which returns an AppUser object if the user has been authenticated with the application before: 我使用了由用户管理器类所定义的FindAsync方法，以便根据ExternalLoginInfo.Login属性的值对用户进行定位，如果用户之前在应用程序中已经认证，该属性会返回一个AppUser对象： ...AppUser user = await UserManager.FindAsync(loginInfo.Login);... If the FindAsync method doesn’t return an AppUser object, then I know that this is the first time that this user has logged into the application, so I create a new AppUser object, populate it with values, and save it to the database. I also save details of how the user logged in so that I can find them next time: 如果FindAsync方法返回的不是AppUser对象，那么我便知道这是用户首次登录应用程序，于是便创建了一个新的AppUser对象，填充该对象的值，并将其保存到数据库。我还保存了用户如何登录的细节，以便下次能够找到他们： ...result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);... All that remains is to generate an identity the user, copy the claims provided by Google, and create an authentication cookie so that the application knows the user has been authenticated: 剩下的事情只是生成该用户的标识了，拷贝Google提供的声明（Claims），并创建一个认证Cookie，以使应用程序知道此用户已认证： ...ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties { IsPersistent = false }, ident);... 15.4.2 Testing Google Authentication 15.4.2 测试Google认证 There is one further change that I need to make before I can test Google authentication: I need to change the account verification I set up in Chapter 13 because it prevents accounts from being created with e-mail addresses that are not within the example.com domain. Listing 15-25 shows how I removed the verification from the AppUserManager class. 在测试Google认证之前还需要一处修改：需要修改第13章所建立的账号验证，因为它不允许example.com域之外的E-mail地址创建账号。清单15-25显示了如何在AppUserManager类中删除这种验证。 Listing 15-25. Disabling Account Validation in the AppUserManager.cs File 清单15-25. 在AppUserManager.cs文件中取消账号验证 using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Microsoft.AspNet.Identity.Owin;using Microsoft.Owin;using Users.Models; namespace Users.Infrastructure {public class AppUserManager : UserManager<AppUser> {public AppUserManager(IUserStore<AppUser> store): base(store) {}public static AppUserManager Create(IdentityFactoryOptions<AppUserManager> options,IOwinContext context) {AppIdentityDbContext db = context.Get<AppIdentityDbContext>();AppUserManager manager = new AppUserManager(new UserStore<AppUser>(db)); manager.PasswordValidator = new CustomPasswordValidator {RequiredLength = 6,RequireNonLetterOrDigit = false,RequireDigit = false,RequireLowercase = true,RequireUppercase = true}; //manager.UserValidator = new CustomUserValidator(manager) {// AllowOnlyAlphanumericUserNames = true,// RequireUniqueEmail = true//};return manager;} }} Tip you can use validation for externally authenticated accounts, but I am just going to disable the feature for simplicity. 提示：也可以使用外部已认证账号的验证，但这里出于简化，取消了这一特性。 To test authentication, start the application, click the Log In via Google button, and provide the credentials for a valid Google account. When you have completed the authentication process, your browser will be redirected back to the application. If you navigate to the /Claims/Index URL, you will be able to see how claims from the Google system have been added to the user’s identity, as shown in Figure 15-7. 为了测试认证，启动应用程序，通过点击“Log In via Google（通过Google登录）”按钮，并提供有效的Google账号凭据。当你完成了认证过程时，浏览器将被重定向回应用程序。如果导航到/Claims/Index URL，便能够看到来自Google系统的声明（Claims），已被添加到用户的标识中了，如图15-7所示。 Figure 15-7. Claims from Google 图15-7. 来自Google的声明（Claims） 15.5 Summary 15.5 小结 In this chapter, I showed you some of the advanced features that ASP.NET Identity supports. I demonstrated the use of custom user properties and how to use database migrations to preserve data when you upgrade the schema to support them. I explained how claims work and how they can be used to create more flexible ways of authorizing users. I finished the chapter by showing you how to authenticate users via Google, which builds on the ideas behind the use of claims. 本章向你演示了ASP.NET Identity所支持的一些高级特性。演示了自定义用户属性的使用，还演示了在升级数据架构时，如何使用数据库迁移保护数据。我解释了声明（Claims）的工作机制，以及如何将它们用于创建更灵活的用户授权方式。最后演示了如何通过Google进行认证结束了本章，这是建立在使用声明（Claims）的思想基础之上的。 本篇文章为转载内容。原文链接：https://blog.csdn.net/gz19871113/article/details/108591802。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...e和session的应用之后，我们可以关注以下几个与之紧密相关的前沿话题和深度解读： 1. 最新网络安全政策对网络爬虫的影响：近期，各国对于数据安全和个人隐私保护的法律法规日趋严格，如欧盟的GDPR（一般数据保护条例）以及我国的《个人信息保护法》。这些法规对网络爬虫抓取网站信息的行为提出了更高的合规要求，包括如何合法获取并使用带有用户身份信息的cookie及session数据。 2. HTTPS加密协议强化与新型证书策略：随着网络安全技术的发展，越来越多的网站采用更高级别的SSL/TLS证书以增强安全性。例如，Let's Encrypt等项目推动了免费SSL证书的广泛部署，使得HTTP站点向HTTPS过渡成为主流趋势。这对网络爬虫而言意味着必须更新应对策略，理解和适配不同类型的SSL证书验证机制。 3. 反爬策略的技术演进与对策研究：面对日益复杂的网站反爬机制，诸如基于用户行为分析、动态验证码、IP封锁等手段层出不穷。研究人员正在探索更先进的模拟登录方法和维持session活性技术，同时利用AI图像识别技术破解复杂验证码也成为业界热门话题。 4. 网络爬虫伦理与法律边界探讨：在实际应用中，网络爬虫技术往往涉及道德和法律问题。例如，未经许可抓取受版权保护的内容或侵犯用户隐私。相关案例引发了关于合理使用网络爬虫、尊重数据来源权和用户知情权的深入讨论，这对于指导开发者正确运用cookie和session管理用户状态具有重要意义。 综上所述，无论是从技术层面还是法律伦理角度，处理不信任SSL证书、cookie和session的相关知识都是网络爬虫领域发展的重要组成部分。不断跟进相关政策变化和技术演进，将有助于我们更好地在遵守规则的前提下进行有效的数据采集和分析工作。